Copyright (c) 1994-1996, 1998-2005, 2007-2009
	Todd C. Miller <Todd.Miller@courtesan.com>

Permission to use, copy, modify, and distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Sponsored in part by the Defense Advanced Research Projects
Agency (DARPA) and Air Force Research Laboratory, Air Force
Materiel Command, USAF, under agreement number F39502-99-1-0512.

$Sudo: sudoers.pod,v 1.173 2009/06/30 12:41:09 millert Exp $
=pod

=head1 NAME

sudoers - list of which users may execute what

=head1 DESCRIPTION

The I<sudoers> file is composed of two types of entries: aliases
(basically variables) and user specifications (which specify who
may run what).

When multiple entries match for a user, they are applied in order.
Where there are multiple matches, the last match is used (which is
not necessarily the most specific match).

The I<sudoers> grammar will be described below in Extended Backus-Naur
Form (EBNF).  Don't despair if you don't know what EBNF is; it is
fairly simple, and the definitions below are annotated.

=head2 Quick guide to EBNF

EBNF is a concise and exact way of describing the grammar of a language.
Each EBNF definition is made up of I<production rules>.  E.g.,

 symbol ::= definition | alternate1 | alternate2 ...

Each I<production rule> references others and thus makes up a
grammar for the language.  EBNF also contains the following
operators, which many readers will recognize from regular
expressions.  Do not, however, confuse them with "wildcard"
characters, which have different meanings.

=over 4

=item C<?>

Means that the preceding symbol (or group of symbols) is optional.
That is, it may appear once or not at all.

=item C<*>

Means that the preceding symbol (or group of symbols) may appear
zero or more times.

=item C<+>

Means that the preceding symbol (or group of symbols) may appear
one or more times.

=back

Parentheses may be used to group symbols together.  For clarity,
we will use single quotes ('') to designate what is a verbatim character
string (as opposed to a symbol name).

=head2 Aliases

There are four kinds of aliases: C<User_Alias>, C<Runas_Alias>,
C<Host_Alias> and C<Cmnd_Alias>.

 Alias ::= 'User_Alias'  User_Alias (':' User_Alias)* |
	   'Runas_Alias' Runas_Alias (':' Runas_Alias)* |
	   'Host_Alias'  Host_Alias (':' Host_Alias)* |
	   'Cmnd_Alias'  Cmnd_Alias (':' Cmnd_Alias)*

 User_Alias ::= NAME '=' User_List

 Runas_Alias ::= NAME '=' Runas_List

 Host_Alias ::= NAME '=' Host_List

 Cmnd_Alias ::= NAME '=' Cmnd_List

 NAME ::= [A-Z]([A-Z][0-9]_)*

Each I<alias> definition is of the form

 Alias_Type NAME = item1, item2, ...

where I<Alias_Type> is one of C<User_Alias>, C<Runas_Alias>, C<Host_Alias>,
or C<Cmnd_Alias>.  A C<NAME> is a string of uppercase letters, numbers,
and underscore characters ('_').  A C<NAME> B<must> start with an
uppercase letter.  It is possible to put several alias definitions
of the same type on a single line, joined by a colon (':').  E.g.,

 Alias_Type NAME = item1, item2, item3 : NAME = item4, item5

The definitions of what constitutes a valid I<alias> member follow.

 User_List ::= User |
	       User ',' User_List

 User ::= '!'* username |
	  '!'* '#'uid |
	  '!'* '%'group |
	  '!'* '+'netgroup |
	  '!'* '%:'nonunix_group |
	  '!'* User_Alias

A C<User_List> is made up of one or more usernames, uids (prefixed
with '#'), system groups (prefixed with '%'), netgroups (prefixed
with '+') and C<User_Alias>es.  Each list item may be prefixed with
zero or more '!' operators.  An odd number of '!' operators negate
the value of the item; an even number just cancel each other out.

A C<username>, C<group>, C<netgroup> and C<nonunix_groups> may
be enclosed in double quotes to avoid the need for escaping special
characters.  Alternately, special characters may be specified in
escaped hex mode, e.g. \x20 for space.

The C<nonunix_group> syntax depends on the underlying implementation.
For instance, the QAS AD backend supports the following formats:

=over 4

=item *

Group in the same domain: "Group Name"

=item *

Group in any domain: "Group Name@FULLY.QUALIFIED.DOMAIN"

=item *

Group SID: "S-1-2-34-5678901234-5678901234-5678901234-567"

=back

Note that quotes around group names are optional.  Unquoted strings must
use a backslash (\) to escape spaces and the '@' symbol.

 Runas_List ::= Runas_Member |
		Runas_Member ',' Runas_List

 Runas_Member ::= '!'* username |
	          '!'* '#'uid |
	          '!'* '%'group |
	          '!'* +netgroup |
	          '!'* Runas_Alias

A C<Runas_List> is similar to a C<User_List> except that instead
of C<User_Alias>es it can contain C<Runas_Alias>es.  Note that
usernames and groups are matched as strings.  In other words, two
users (groups) with the same uid (gid) are considered to be distinct.
If you wish to match all usernames with the same uid (e.g.E<nbsp>root
and toor), you can use a uid instead (#0 in the example given).

 Host_List ::= Host |
	       Host ',' Host_List

 Host ::= '!'* hostname |
	  '!'* ip_addr |
	  '!'* network(/netmask)? |
	  '!'* '+'netgroup |
	  '!'* Host_Alias

A C<Host_List> is made up of one or more hostnames, IP addresses,
network numbers, netgroups (prefixed with '+') and other aliases.
Again, the value of an item may be negated with the '!' operator.
If you do not specify a netmask along with the network number,
B<sudo> will query each of the local host's network interfaces and,
if the network number corresponds to one of the hosts's network
interfaces, the corresponding netmask will be used.  The netmask
may be specified either in standard IP address notation
(e.g.E<nbsp>255.255.255.0 or ffff:ffff:ffff:ffff::),
or CIDR notation (number of bits, e.g.E<nbsp>24 or 64).  A hostname may
include shell-style wildcards (see the L<Wildcards> section below),
but unless the C<hostname> command on your machine returns the fully
qualified hostname, you'll need to use the I<fqdn> option for
wildcards to be useful.

 Cmnd_List ::= Cmnd |
	       Cmnd ',' Cmnd_List

 commandname ::= filename |
	         filename args |
	         filename '""'

 Cmnd ::= '!'* commandname |
	  '!'* directory |
	  '!'* "sudoedit" |
	  '!'* Cmnd_Alias

A C<Cmnd_List> is a list of one or more commandnames, directories, and other
aliases.  A commandname is a fully qualified filename which may include
shell-style wildcards (see the L<Wildcards> section below).  A simple
filename allows the user to run the command with any arguments he/she
wishes.  However, you may also specify command line arguments (including
wildcards).  Alternately, you can specify C<""> to indicate that the command
may only be run B<without> command line arguments.  A directory is a
fully qualified pathname ending in a '/'.  When you specify a directory
in a C<Cmnd_List>, the user will be able to run any file within that directory
(but not in any subdirectories therein).

If a C<Cmnd> has associated command line arguments, then the arguments
in the C<Cmnd> must match exactly those given by the user on the command line
(or match the wildcards if there are any).  Note that the following
characters must be escaped with a '\' if they are used in command
arguments: ',', ':', '=', '\'.  The special command C<"sudoedit">
is used to permit a user to run B<sudo> with the B<-e> option (or
as B<sudoedit>).  It may take command line arguments just as
a normal command does.

=head2 Defaults

Certain configuration options may be changed from their default
values at runtime via one or more C<Default_Entry> lines.  These
may affect all users on any host, all users on a specific host, a
specific user, a specific command, or commands being run as a specific user.
Note that per-command entries may not include command line arguments.
If you need to specify arguments, define a C<Cmnd_Alias> and reference
that instead.

 Default_Type ::= 'Defaults' |
		  'Defaults' '@' Host_List |
		  'Defaults' ':' User_List |
		  'Defaults' '!' Cmnd_List |
		  'Defaults' '>' Runas_List

 Default_Entry ::= Default_Type Parameter_List

 Parameter_List ::= Parameter |
		    Parameter ',' Parameter_List

 Parameter ::= Parameter '=' Value |
	       Parameter '+=' Value |
	       Parameter '-=' Value |
	       '!'* Parameter

Parameters may be B<flags>, B<integer> values, B<strings>, or B<lists>.
Flags are implicitly boolean and can be turned off via the '!'
operator.  Some integer, string and list parameters may also be
used in a boolean context to disable them.  Values may be enclosed
in double quotes (C<">) when they contain multiple words.  Special
characters may be escaped with a backslash (C<\>).

Lists have two additional assignment operators, C<+=> and C<-=>.
These operators are used to add to and delete from a list respectively.
It is not an error to use the C<-=> operator to remove an element
that does not exist in a list.

Defaults entries are parsed in the following order: generic, host
and user Defaults first, then runas Defaults and finally command
defaults.

See L<"SUDOERS OPTIONS"> for a list of supported Defaults parameters.

=head2 User Specification

 User_Spec ::= User_List Host_List '=' Cmnd_Spec_List \
	       (':' Host_List '=' Cmnd_Spec_List)*

 Cmnd_Spec_List ::= Cmnd_Spec |
		    Cmnd_Spec ',' Cmnd_Spec_List

 Cmnd_Spec ::= Runas_Spec? Tag_Spec* Cmnd

 Runas_Spec ::= '(' Runas_List? (':' Runas_List)? ')'

 Tag_Spec ::= ('NOPASSWD:' | 'PASSWD:' | 'NOEXEC:' | 'EXEC:' |
	       'SETENV:' | 'NOSETENV:' )

A B<user specification> determines which commands a user may run
(and as what user) on specified hosts.  By default, commands are
run as B<root>, but this can be changed on a per-command basis.

The basic structure of a user specification is `who = where (as_whom)
what'.  Let's break that down into its constituent parts:

=head2 Runas_Spec

A C<Runas_Spec> determines the user and/or the group that a command
may be run as.  A fully-specified C<Runas_Spec> consists of two
C<Runas_List>s (as defined above) separated by a colon (':') and
enclosed in a set of parentheses.  The first C<Runas_List> indicates
which users the command may be run as via B<sudo>'s B<-u> option.
The second defines a list of groups that can be specified via
B<sudo>'s B<-g> option.  If both C<Runas_List>s are specified, the
command may be run with any combination of users and groups listed
in their respective C<Runas_List>s.  If only the first is specified,
the command may be run as any user in the list but no B<-g> option
may be specified.  If the first C<Runas_List> is empty but the
second is specified, the command may be run as the invoking user
with the group set to any listed in the C<Runas_List>.  If no
C<Runas_Spec> is specified the command may be run as B<root> and
no group may be specified.

A C<Runas_Spec> sets the default for the commands that follow it.
What this means is that for the entry:

 dgb	boulder = (operator) /bin/ls, /bin/kill, /usr/bin/lprm

The user B<dgb> may run F</bin/ls>, F</bin/kill>, and
F</usr/bin/lprm> -- but only as B<operator>.  E.g.,

 $ sudo -u operator /bin/ls.

It is also possible to override a C<Runas_Spec> later on in an
entry.  If we modify the entry like so:

 dgb	boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm

Then user B<dgb> is now allowed to run F</bin/ls> as B<operator>,
but  F</bin/kill> and F</usr/bin/lprm> as B<root>.

We can extend this to allow B<dgb> to run C</bin/ls> with either
the user or group set to B<operator>:

 dgb	boulder = (operator : operator) /bin/ls, (root) /bin/kill, \
	/usr/bin/lprm

In the following example, user B<tcm> may run commands that access
a modem device file with the dialer group.  Note that in this example
only the group will be set, the command still runs as user B<tcm>.

 tcm	boulder = (:dialer) /usr/bin/tip, /usr/bin/cu, \
	/usr/local/bin/minicom

=head2 Tag_Spec

A command may have zero or more tags associated with it.  There are
eight possible tag values, C<NOPASSWD>, C<PASSWD>, C<NOEXEC>, C<EXEC>,
C<SETENV> and C<NOSETENV>.
Once a tag is set on a C<Cmnd>, subsequent C<Cmnd>s in the
C<Cmnd_Spec_List>, inherit the tag unless it is overridden by the
opposite tag (i.e.: C<PASSWD> overrides C<NOPASSWD> and C<NOEXEC>
overrides C<EXEC>).

=head3 NOPASSWD and PASSWD

By default, B<sudo> requires that a user authenticate him or herself
before running a command.  This behavior can be modified via the
C<NOPASSWD> tag.  Like a C<Runas_Spec>, the C<NOPASSWD> tag sets
a default for the commands that follow it in the C<Cmnd_Spec_List>.
Conversely, the C<PASSWD> tag can be used to reverse things.
For example:

 ray	rushmore = NOPASSWD: /bin/kill, /bin/ls, /usr/bin/lprm

would allow the user B<ray> to run F</bin/kill>, F</bin/ls>, and
F</usr/bin/lprm> as B<root> on the machine rushmore without
authenticating himself.  If we only want B<ray> to be able to
run F</bin/kill> without a password the entry would be:

 ray	rushmore = NOPASSWD: /bin/kill, PASSWD: /bin/ls, /usr/bin/lprm

Note, however, that the C<PASSWD> tag has no effect on users who are
in the group specified by the I<exempt_group> option.

By default, if the C<NOPASSWD> tag is applied to any of the entries
for a user on the current host, he or she will be able to run
C<sudo -l> without a password.  Additionally, a user may only run
C<sudo -v> without a password if the C<NOPASSWD> tag is present
for all a user's entries that pertain to the current host.
This behavior may be overridden via the verifypw and listpw options.

=head3 NOEXEC and EXEC

If B<sudo> has been compiled with I<noexec> support and the underlying
operating system supports it, the C<NOEXEC> tag can be used to prevent
a dynamically-linked executable from running further commands itself.

In the following example, user B<aaron> may run F</usr/bin/more>
and F</usr/bin/vi> but shell escapes will be disabled.

 aaron	shanty = NOEXEC: /usr/bin/more, /usr/bin/vi

See the L<PREVENTING SHELL ESCAPES> section below for more details
on how C<NOEXEC> works and whether or not it will work on your system.

=head3 SETENV and NOSETENV

These tags override the value of the I<setenv> option on a per-command
basis.  Note that if C<SETENV> has been set for a command, any
environment variables set on the command line way are not subject
to the restrictions imposed by I<env_check>, I<env_delete>, or
I<env_keep>.  As such, only trusted users should be allowed to set
variables in this manner.  If the command matched is B<ALL>, the
C<SETENV> tag is implied for that command; this default may
be overridden by use of the C<UNSETENV> tag.

=head2 Wildcards

B<sudo> allows shell-style I<wildcards> (aka meta or glob characters)
to be used in hostnames, pathnames and command line arguments in
the I<sudoers> file.  Wildcard matching is done via the B<POSIX>
L<glob(3)> and L<fnmatch(3)> routines.  Note that these are I<not>
regular expressions.

=over 8

=item C<*>

Matches any set of zero or more characters.

=item C<?>

Matches any single character.

=item C<[...]>

Matches any character in the specified range.

=item C<[!...]>

Matches any character B<not> in the specified range.

=item C<\x>

For any character "x", evaluates to "x".  This is used to
escape special characters such as: "*", "?", "[", and "}".

=back

POSIX character classes may also be used if your system's L<glob(3)>
and L<fnmatch(3)> functions support them.  However, because the
C<':'> character has special meaning in I<sudoers>, it must be
escaped.  For example:

    /bin/ls [[\:alpha\:]]*

Would match any filename beginning with a letter.

Note that a forward slash ('/') will B<not> be matched by
wildcards used in the pathname.  When matching the command
line arguments, however, a slash B<does> get matched by
wildcards.  This is to make a path like:

    /usr/bin/*

match F</usr/bin/who> but not F</usr/bin/X11/xterm>.

=head2 Exceptions to wildcard rules

The following exceptions apply to the above rules:

=over 8

=item C<"">

If the empty string C<""> is the only command line argument in the
I<sudoers> entry it means that command is not allowed to be run
with B<any> arguments.

=back

=head2 Including other files from within sudoers

It is possible to include other I<sudoers> files from within the
I<sudoers> file currently being parsed using the C<#include> and
C<#includedir> directives.

This can be used, for example, to keep a site-wide I<sudoers> file
in addition to a local, per-machine file.  For the sake of this
example the site-wide I<sudoers> will be F</etc/sudoers> and the
per-machine one will be F</etc/sudoers.local>.  To include
F</etc/sudoers.local> from within F</etc/sudoers> we would use the
following line in F</etc/sudoers>:

=over 4

C<#include /etc/sudoers.local>

=back

When B<sudo> reaches this line it will suspend processing of the
current file (F</etc/sudoers>) and switch to F</etc/sudoers.local>.
Upon reaching the end of F</etc/sudoers.local>, the rest of
F</etc/sudoers> will be processed.  Files that are included may
themselves include other files.  A hard limit of 128 nested include
files is enforced to prevent include file loops.

The filename may include the C<%h> escape, signifying the short form
of the hostname.  I.e., if the machine's hostname is "xerxes", then

C<#include /etc/sudoers.%h>

will cause B<sudo> to include the file F</etc/sudoers.xerxes>.

The C<#includedir> directive can be used to create a F<sudo.d>
directory that the system package manager can drop I<sudoers> rules
into as part of package installation.  For example, given:

C<#includedir /etc/sudoers.d>

B<sudo> will read each file in F</etc/sudoers.d>, skipping file
names that end in C<~> or contain a C<.> character to avoid causing
problems with package manager or editor temporary/backup files.
Files are parsed in sorted lexical order.  That is,
F</etc/sudoers.d/01_first> will be parsed before
F</etc/sudoers.d/10_second>.  Be aware that because the sorting is
lexical, not numeric, F</etc/sudoers.d/1_whoops> would be loaded
B<after> F</etc/sudoers.d/10_second>.  Using a consistent number
of leading zeroes in the file names can be used to avoid such
problems.

Note that unlike files included via C<#include>, B<visudo> will not
edit the files in a C<#includedir> directory unless one of them
contains a syntax error.  It is still possible to run B<visudo>
with the C<-f> flag to edit the files directly.

=head2 Other special characters and reserved words

The pound sign ('#') is used to indicate a comment (unless it is
part of a #include directive or unless it occurs in the context of
a user name and is followed by one or more digits, in which case
it is treated as a uid).  Both the comment character and any text
after it, up to the end of the line, are ignored.

The reserved word B<ALL> is a built-in I<alias> that always causes
a match to succeed.  It can be used wherever one might otherwise
use a C<Cmnd_Alias>, C<User_Alias>, C<Runas_Alias>, or C<Host_Alias>.
You should not try to define your own I<alias> called B<ALL> as the
built-in alias will be used in preference to your own.  Please note
that using B<ALL> can be dangerous since in a command context, it
allows the user to run B<any> command on the system.

An exclamation point ('!') can be used as a logical I<not> operator
both in an I<alias> and in front of a C<Cmnd>.  This allows one to
exclude certain values.  Note, however, that using a C<!> in
conjunction with the built-in C<ALL> alias to allow a user to
run "all but a few" commands rarely works as intended (see SECURITY
NOTES below).

Long lines can be continued with a backslash ('\') as the last
character on the line.

Whitespace between elements in a list as well as special syntactic
characters in a I<User Specification> ('=', ':', '(', ')') is optional.

The following characters must be escaped with a backslash ('\') when
used as part of a word (e.g.E<nbsp>a username or hostname):
'@', '!', '=', ':', ',', '(', ')', '\'.

=head1 SUDOERS OPTIONS

B<sudo>'s behavior can be modified by C<Default_Entry> lines, as
explained earlier.  A list of all supported Defaults parameters,
grouped by type, are listed below.

B<Flags>:

=over 16

=item always_set_home

If set, B<sudo> will set the C<HOME> environment variable to the home
directory of the target user (which is root unless the B<-u> option is used).
This effectively means that the B<-H> option is always implied.
This flag is I<off> by default.

=item authenticate

If set, users must authenticate themselves via a password (or other
means of authentication) before they may run commands.  This default
may be overridden via the C<PASSWD> and C<NOPASSWD> tags.
This flag is I<on> by default.

=item closefrom_override

If set, the user may use B<sudo>'s B<-C> option which
overrides the default starting point at which B<sudo> begins
closing open file descriptors.  This flag is I<off> by default.

=item env_editor

If set, B<visudo> will use the value of the EDITOR or VISUAL
environment variables before falling back on the default editor list.
Note that this may create a security hole as it allows the user to
run any arbitrary command as root without logging.  A safer alternative
is to place a colon-separated list of editors in the C<editor>
variable.  B<visudo> will then only use the EDITOR or VISUAL if
they match a value specified in C<editor>.  This flag is I<@env_editor@> by
default.

=item env_reset

If set, B<sudo> will reset the environment to only contain the
LOGNAME, SHELL, USER, USERNAME and the C<SUDO_*> variables.  Any
variables in the caller's environment that match the C<env_keep>
and C<env_check> lists are then added.  The default contents of the
C<env_keep> and C<env_check> lists are displayed when B<sudo> is
run by root with the I<-V> option.  If the I<secure_path> option
is set, its value will be used for the C<PATH> environment variable.
This flag is I<on> by default.

=item fqdn

Set this flag if you want to put fully qualified hostnames in the
I<sudoers> file.  I.e., instead of myhost you would use myhost.mydomain.edu.
You may still use the short form if you wish (and even mix the two).
Beware that turning on I<fqdn> requires B<sudo> to make DNS lookups
which may make B<sudo> unusable if DNS stops working (for example
if the machine is not plugged into the network).  Also note that
you must use the host's official name as DNS knows it.  That is,
you may not use a host alias (C<CNAME> entry) due to performance
issues and the fact that there is no way to get all aliases from
DNS.  If your machine's hostname (as returned by the C<hostname>
command) is already fully qualified you shouldn't need to set
I<fqdn>.  This flag is I<@fqdn@> by default.

=item ignore_dot

If set, B<sudo> will ignore '.' or '' (current dir) in the C<PATH>
environment variable; the C<PATH> itself is not modified.  This
flag is I<@ignore_dot@> by default.

=item ignore_local_sudoers

If set via LDAP, parsing of F<@sysconfdir@/sudoers> will be skipped.
This is intended for Enterprises that wish to prevent the usage of local
sudoers files so that only LDAP is used.  This thwarts the efforts of
rogue operators who would attempt to add roles to F<@sysconfdir@/sudoers>.
When this option is present, F<@sysconfdir@/sudoers> does not even need to
exist. Since this option tells B<sudo> how to behave when no specific LDAP
entries have been matched, this sudoOption is only meaningful for the
C<cn=defaults> section.  This flag is I<off> by default.

=item insults

If set, B<sudo> will insult users when they enter an incorrect
password.  This flag is I<@insults@> by default.

=item log_host

If set, the hostname will be logged in the (non-syslog) B<sudo> log file.
This flag is I<off> by default.

=item log_year

If set, the four-digit year will be logged in the (non-syslog) B<sudo> log file.
This flag is I<off> by default.

=item long_otp_prompt

When validating with a One Time Password (OPT) scheme such as
B<S/Key> or B<OPIE>, a two-line prompt is used to make it easier
to cut and paste the challenge to a local window.  It's not as
pretty as the default but some people find it more convenient.  This
flag is I<@long_otp_prompt@> by default.

=item mail_always

Send mail to the I<mailto> user every time a users runs B<sudo>.
This flag is I<off> by default.

=item mail_badpass

Send mail to the I<mailto> user if the user running B<sudo> does not
enter the correct password.  This flag is I<off> by default.

=item mail_no_host

If set, mail will be sent to the I<mailto> user if the invoking
user exists in the I<sudoers> file, but is not allowed to run
commands on the current host.  This flag is I<@mail_no_host@> by default.

=item mail_no_perms

If set, mail will be sent to the I<mailto> user if the invoking
user is allowed to use B<sudo> but the command they are trying is not
listed in their I<sudoers> file entry or is explicitly denied.
This flag is I<@mail_no_perms@> by default.

=item mail_no_user

If set, mail will be sent to the I<mailto> user if the invoking
user is not in the I<sudoers> file.  This flag is I<@mail_no_user@>
by default.

=item noexec

If set, all commands run via B<sudo> will behave as if the C<NOEXEC>
tag has been set, unless overridden by a C<EXEC> tag.  See the
description of I<NOEXEC and EXEC> below as well as the L<PREVENTING SHELL
ESCAPES> section at the end of this manual.  This flag is I<off> by default.

=item path_info

Normally, B<sudo> will tell the user when a command could not be
found in their C<PATH> environment variable.  Some sites may wish
to disable this as it could be used to gather information on the
location of executables that the normal user does not have access
to.  The disadvantage is that if the executable is simply not in
the user's C<PATH>, B<sudo> will tell the user that they are not
allowed to run it, which can be confusing.  This flag is I<@path_info@>
by default.

=item passprompt_override

The password prompt specified by I<passprompt> will normally only
be used if the passwod prompt provided by systems such as PAM matches
the string "Password:".  If I<passprompt_override> is set, I<passprompt>
will always be used.  This flag is I<off> by default.

=item preserve_groups

By default, B<sudo> will initialize the group vector to the list of
groups the target user is in.  When I<preserve_groups> is set, the
user's existing group vector is left unaltered.  The real and
effective group IDs, however, are still set to match the target
user.  This flag is I<off> by default.

=item pwfeedback

By default, B<sudo> reads the password like most other Unix programs,
by turning off echo until the user hits the return (or enter) key.
Some users become confused by this as it appears to them that B<sudo>
has hung at this point.  When I<pwfeedback> is set, B<sudo> will
provide visual feedback when the user presses a key.  Note that
this does have a security impact as an onlooker may be able to
determine the length of the password being entered.
This flag is I<off> by default.

=item requiretty

If set, B<sudo> will only run when the user is logged in to a real
tty.  When this flag is set, B<sudo> can only be run from a login
session and not via other means such as L<cron(8)> or cgi-bin scripts.
This flag is I<off> by default.

=item root_sudo

If set, root is allowed to run B<sudo> too.  Disabling this prevents users
from "chaining" B<sudo> commands to get a root shell by doing something
like C<"sudo sudo /bin/sh">.  Note, however, that turning off I<root_sudo>
will also prevent root and from running B<sudoedit>.
Disabling I<root_sudo> provides no real additional security; it
exists purely for historical reasons.
This flag is I<@root_sudo@> by default.

=item rootpw

If set, B<sudo> will prompt for the root password instead of the password
of the invoking user.  This flag is I<off> by default.

=item runaspw

If set, B<sudo> will prompt for the password of the user defined by the
I<runas_default> option (defaults to C<@runas_default@>) instead of the
password of the invoking user.  This flag is I<off> by default.

=item set_home

If set and B<sudo> is invoked with the B<-s> option the C<HOME>
environment variable will be set to the home directory of the target
user (which is root unless the B<-u> option is used).  This effectively
makes the B<-s> option imply B<-H>.  This flag is I<off> by default.

=item set_logname

Normally, B<sudo> will set the C<LOGNAME>, C<USER> and C<USERNAME>
environment variables to the name of the target user (usually root
unless the B<-u> option is given).  However, since some programs
(including the RCS revision control system) use C<LOGNAME> to
determine the real identity of the user, it may be desirable to
change this behavior.  This can be done by negating the set_logname
option.  Note that if the I<env_reset> option has not been disabled,
entries in the I<env_keep> list will override the value of
I<set_logname>.  This flag is I<off> by default.

=item setenv

Allow the user to disable the I<env_reset> option from the command
line.  Additionally, environment variables set via the command line
are not subject to the restrictions imposed by I<env_check>,
I<env_delete>, or I<env_keep>.  As such, only trusted users should
be allowed to set variables in this manner.  This flag is I<off>
by default.

=item shell_noargs

If set and B<sudo> is invoked with no arguments it acts as if the
B<-s> option had been given.  That is, it runs a shell as root (the
shell is determined by the C<SHELL> environment variable if it is
set, falling back on the shell listed in the invoking user's
/etc/passwd entry if not).  This flag is I<off> by default.

=item fast_glob

Normally, B<sudo> uses the L<glob(3)> function to do shell-style
globbing when matching pathnames.  However, since it accesses the
file system, L<glob(3)> can take a long time to complete for some
patterns, especially when the pattern references a network file
system that is mounted on demand (automounted).  The I<fast_glob>
option causes B<sudo> to use the L<fnmatch(3)> function, which does
not access the file system to do its matching.  The disadvantage
of I<fast_glob> is that it is unable to match relative pathnames
such as F<./ls> or F<../bin/ls>.  This flag is I<off> by default.

=item stay_setuid

Normally, when B<sudo> executes a command the real and effective
UIDs are set to the target user (root by default).  This option
changes that behavior such that the real UID is left as the invoking
user's UID.  In other words, this makes B<sudo> act as a setuid
wrapper.  This can be useful on systems that disable some potentially
dangerous functionality when a program is run setuid.  This option
is only effective on systems with either the setreuid() or setresuid()
function.  This flag is I<off> by default.

=item targetpw

If set, B<sudo> will prompt for the password of the user specified by
the B<-u> option (defaults to C<root>) instead of the password of the
invoking user.  Note that this precludes the use of a uid not listed
in the passwd database as an argument to the B<-u> option.
This flag is I<off> by default.

=item tty_tickets

If set, users must authenticate on a per-tty basis.  Normally,
B<sudo> uses a directory in the ticket dir with the same name as
the user running it.  With this flag enabled, B<sudo> will use a
file named for the tty the user is logged in on in that directory.
This flag is I<@tty_tickets@> by default.

=item umask_override

If set, B<sudo> will set the umask as specified by I<sudoers> without
modification.  This makes it possible to specify a more permissive
umask in I<sudoers> than the user's own umask and matches historical
behavior.  If I<umask_override> is not set, B<sudo> will set the
umask to be the union of the user's umask and what is specified in
I<sudoers>.  This flag is I<off> by default.

=item use_loginclass

If set, B<sudo> will apply the defaults specified for the target user's
login class if one exists.  Only available if B<sudo> is configured with
the --with-logincap option.  This flag is I<off> by default.

=item visiblepw

By default, B<sudo> will refuse to run if the user must enter a
password but it is not possible to disable echo on the terminal.
If the I<visiblepw> flag is set, B<sudo> will prompt for a password
even when it would be visible on the screen.  This makes it possible
to run things like C<"rsh somehost sudo ls"> since L<rsh(1)> does
not allocate a tty.  This flag is I<off> by default.

=back

B<Integers>:

=over 16

=item closefrom

Before it executes a command, B<sudo> will close all open file
descriptors other than standard input, standard output and standard
error (ie: file descriptors 0-2).  The I<closefrom> option can be used
to specify a different file descriptor at which to start closing.
The default is C<3>.

=item passwd_tries

The number of tries a user gets to enter his/her password before
B<sudo> logs the failure and exits.  The default is C<@passwd_tries@>.

=back

B<Integers that can be used in a boolean context>:

=over 16

=item loglinelen

Number of characters per line for the file log.  This value is used
to decide when to wrap lines for nicer log files.  This has no
effect on the syslog log file, only the file log.  The default is
C<@loglen@> (use 0 or negate the option to disable word wrap).

=item passwd_timeout

Number of minutes before the B<sudo> password prompt times out.
The default is C<@password_timeout@>; set this to C<0> for no password timeout.

=item timestamp_timeout

Number of minutes that can elapse before B<sudo> will ask for a
passwd again.  The default is C<@timeout@>.  Set this to C<0> to always
prompt for a password.
If set to a value less than C<0> the user's timestamp will never
expire.  This can be used to allow users to create or delete their
own timestamps via C<sudo -v> and C<sudo -k> respectively.

=item umask

Umask to use when running the command.  Negate this option or set
it to 0777 to preserve the user's umask.  The actual umask that is
used will be the union of the user's umask and C<@sudo_umask@>.
This guarantees that B<sudo> never lowers the umask when running a
command.  Note on systems that use PAM, the default PAM configuration
may specify its own umask which will override the value set in
I<sudoers>.

=back

B<Strings>:

=over 16

=item badpass_message

Message that is displayed if a user enters an incorrect password.
The default is C<@badpass_message@> unless insults are enabled.

=item editor

A colon (':') separated list of editors allowed to be used with
B<visudo>.  B<visudo> will choose the editor that matches the user's
EDITOR environment variable if possible, or the first editor in the
list that exists and is executable.  The default is the path to vi
on your system.

=item mailsub

Subject of the mail sent to the I<mailto> user. The escape C<%h>
will expand to the hostname of the machine.
Default is C<@mailsub@>.

=item noexec_file

Path to a shared library containing dummy versions of the execv(),
execve() and fexecve() library functions that just return an error.
This is used to implement the I<noexec> functionality on systems that
support C<LD_PRELOAD> or its equivalent.  Defaults to F<@noexec_file@>.

=item passprompt

The default prompt to use when asking for a password; can be overridden
via the B<-p> option or the C<SUDO_PROMPT> environment variable.
The following percent (`C<%>') escapes are supported:

=over 4

=item C<%H>

expanded to the local hostname including the domain name
(on if the machine's hostname is fully qualified or the I<fqdn>
option is set)

=item C<%h>

expanded to the local hostname without the domain name

=item C<%p>

expanded to the user whose password is being asked for (respects the 
I<rootpw>, I<targetpw> and I<runaspw> flags in I<sudoers>)

=item C<%U>

expanded to the login name of the user the command will
be run as (defaults to root)

=item C<%u>

expanded to the invoking user's login name

=item C<%%>

two consecutive C<%> characters are collapsed into a single C<%> character

=back

The default value is C<@passprompt@>.

=item role

The default SELinux role to use when constructing a new security
context to run the command.  The default role may be overridden on
a per-command basis in I<sudoers> or via command line options.
This option is only available whe B<sudo> is built with SELinux support.

=item runas_default

The default user to run commands as if the B<-u> option is not specified
on the command line.  This defaults to C<@runas_default@>.
Note that if I<runas_default> is set it B<must> occur before
any C<Runas_Alias> specifications.

=item syslog_badpri

Syslog priority to use when user authenticates unsuccessfully.
Defaults to C<@badpri@>.

=item syslog_goodpri

Syslog priority to use when user authenticates successfully.
Defaults to C<@goodpri@>.

=item sudoers_locale

Locale to use when parsing the sudoers file.  Note that changing
the locale may affect how sudoers is interpreted.
Defaults to C<"C">.

=item timestampdir

The directory in which B<sudo> stores its timestamp files.
The default is F<@timedir@>.

=item timestampowner

The owner of the timestamp directory and the timestamps stored therein.
The default is C<root>.

=item type

The default SELinux type to use when constructing a new security
context to run the command.  The default type may be overridden on
a per-command basis in I<sudoers> or via command line options.
This option is only available whe B<sudo> is built with SELinux support.

=back

B<Strings that can be used in a boolean context>:

=over 12

=item askpass

The I<askpass> option specifies the fully qualified path to a helper
program used to read the user's password when no terminal is
available.  This may be the case when B<sudo> is executed from a
graphical (as opposed to text-based) application.  The program
specified by I<askpass> should display the argument passed to it
as the prompt and write the user's password to the standard output.
The value of I<askpass> may be overridden by the C<SUDO_ASKPASS>
environment variable.

=item env_file

The I<env_file> options specifies the fully qualified path to a
file containing variables to be set in the environment of the program
being run.  Entries in this file should either be of the form
C<VARIABLE=value> or C<export VARIABLE=value>.  The value may
optionally be surrounded by single or double quotes.  Variables in
this file are subject to other B<sudo> environment settings such
as I<env_keep> and I<env_check>.

=item exempt_group

Users in this group are exempt from password and PATH requirements.
This is not set by default.

=item lecture

This option controls when a short lecture will be printed along with
the password prompt.  It has the following possible values:

=over 8

=item always

Always lecture the user.

=item never

Never lecture the user.

=item once

Only lecture the user the first time they run B<sudo>.

=back

If no value is specified, a value of I<once> is implied.
Negating the option results in a value of I<never> being used.
The default value is I<@lecture@>.

=item lecture_file

Path to a file containing an alternate B<sudo> lecture that will
be used in place of the standard lecture if the named file exists.
By default, B<sudo> uses a built-in lecture.

=item listpw

This option controls when a password will be required when a
user runs B<sudo> with the B<-l> option.  It has the following possible values:

=over 8

=item all

All the user's I<sudoers> entries for the current host must have
the C<NOPASSWD> flag set to avoid entering a password.

=item always

The user must always enter a password to use the B<-l> option.

=item any

At least one of the user's I<sudoers> entries for the current host
must have the C<NOPASSWD> flag set to avoid entering a password.

=item never

The user need never enter a password to use the B<-l> option.

=back

If no value is specified, a value of I<any> is implied.
Negating the option results in a value of I<never> being used.
The default value is I<any>.

=item logfile

Path to the B<sudo> log file (not the syslog log file).  Setting a path
turns on logging to a file; negating this option turns it off.
By default, B<sudo> logs via syslog.

=item mailerflags

Flags to use when invoking mailer. Defaults to B<-t>.

=item mailerpath

Path to mail program used to send warning mail.
Defaults to the path to sendmail found at configure time.

=item mailfrom

Address to use for the "from" address when sending warning and error
mail.  The address should be enclosed in double quotes (C<">) to
protect against B<sudo> interpreting the C<@> sign.  Defaults to
the name of the user running B<sudo>.

=item mailto

Address to send warning and error mail to.  The address should
be enclosed in double quotes (C<">) to protect against B<sudo>
interpreting the C<@> sign.  Defaults to C<@mailto@>.

=item secure_path

Path used for every command run from B<sudo>.  If you don't trust the
people running B<sudo> to have a sane C<PATH> environment variable you may
want to use this.  Another use is if you want to have the "root path"
be separate from the "user path."  Users in the group specified by the
I<exempt_group> option are not affected by I<secure_path>.
This is not set by default.

=item syslog

Syslog facility if syslog is being used for logging (negate to
disable syslog logging).  Defaults to C<@logfac@>.

=item verifypw

This option controls when a password will be required when a user runs
B<sudo> with the B<-v> option.  It has the following possible values:

=over 8

=item all

All the user's I<sudoers> entries for the current host must have
the C<NOPASSWD> flag set to avoid entering a password.

=item always

The user must always enter a password to use the B<-v> option.

=item any

At least one of the user's I<sudoers> entries for the current host
must have the C<NOPASSWD> flag set to avoid entering a password.

=item never

The user need never enter a password to use the B<-v> option.

=back

If no value is specified, a value of I<all> is implied.
Negating the option results in a value of I<never> being used.
The default value is I<all>.

=back

B<Lists that can be used in a boolean context>:

=over 16

=item env_check

Environment variables to be removed from the user's environment if
the variable's value contains C<%> or C</> characters.  This can
be used to guard against printf-style format vulnerabilities in
poorly-written programs.  The argument may be a double-quoted,
space-separated list or a single value without double-quotes.  The
list can be replaced, added to, deleted from, or disabled by using
the C<=>, C<+=>, C<-=>, and C<!> operators respectively.  Regardless
of whether the C<env_reset> option is enabled or disabled, variables
specified by C<env_check> will be preserved in the environment if
they pass the aforementioned check.  The default list of environment
variables to check is displayed when B<sudo> is run by root with
the I<-V> option.

=item env_delete

Environment variables to be removed from the user's environment
when the I<env_reset> option is not in effect.  The argument may
be a double-quoted, space-separated list or a single value without
double-quotes.  The list can be replaced, added to, deleted from,
or disabled by using the C<=>, C<+=>, C<-=>, and C<!> operators
respectively.  The default list of environment variables to remove
is displayed when B<sudo> is run by root with the I<-V> option.
Note that many operating systems will remove potentially dangerous
variables from the environment of any setuid process (such as
B<sudo>).

=item env_keep

Environment variables to be preserved in the user's environment
when the I<env_reset> option is in effect.  This allows fine-grained
control over the environment B<sudo>-spawned processes will receive.
The argument may be a double-quoted, space-separated list or a
single value without double-quotes.  The list can be replaced, added
to, deleted from, or disabled by using the C<=>, C<+=>, C<-=>, and
C<!> operators respectively.  The default list of variables to keep
is displayed when B<sudo> is run by root with the I<-V> option.

=back

When logging via L<syslog(3)>, B<sudo> accepts the following values
for the syslog facility (the value of the B<syslog> Parameter):
B<authpriv> (if your OS supports it), B<auth>, B<daemon>, B<user>,
B<local0>, B<local1>, B<local2>, B<local3>, B<local4>, B<local5>,
B<local6>, and B<local7>.  The following syslog priorities are
supported: B<alert>, B<crit>, B<debug>, B<emerg>, B<err>, B<info>,
B<notice>, and B<warning>.

=head1 FILES

=over 24

=item F<@sysconfdir@/sudoers>

List of who can run what

=item F</etc/group>

Local groups file

=item F</etc/netgroup>

List of network groups

=back

=head1 EXAMPLES

Below are example I<sudoers> entries.  Admittedly, some of
these are a bit contrived.  First, we define our I<aliases>:

 # User alias specification
 User_Alias	FULLTIMERS = millert, mikef, dowdy
 User_Alias	PARTTIMERS = bostley, jwfox, crawl
 User_Alias	WEBMASTERS = will, wendy, wim

 # Runas alias specification
 Runas_Alias	OP = root, operator
 Runas_Alias	DB = oracle, sybase
 Runas_Alias	ADMINGRP = adm, oper

 # Host alias specification
 Host_Alias	SPARC = bigtime, eclipse, moet, anchor :\
		SGI = grolsch, dandelion, black :\
		ALPHA = widget, thalamus, foobar :\
		HPPA = boa, nag, python
 Host_Alias	CUNETS = 128.138.0.0/255.255.0.0
 Host_Alias	CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0
 Host_Alias	SERVERS = master, mail, www, ns
 Host_Alias	CDROM = orion, perseus, hercules

 # Cmnd alias specification
 Cmnd_Alias	DUMPS = /usr/bin/mt, /usr/sbin/dump, /usr/sbin/rdump,\
			/usr/sbin/restore, /usr/sbin/rrestore
 Cmnd_Alias	KILL = /usr/bin/kill
 Cmnd_Alias	PRINTING = /usr/sbin/lpc, /usr/bin/lprm
 Cmnd_Alias	SHUTDOWN = /usr/sbin/shutdown
 Cmnd_Alias	HALT = /usr/sbin/halt
 Cmnd_Alias	REBOOT = /usr/sbin/reboot
 Cmnd_Alias	SHELLS = /usr/bin/sh, /usr/bin/csh, /usr/bin/ksh, \
			 /usr/local/bin/tcsh, /usr/bin/rsh, \
			 /usr/local/bin/zsh
 Cmnd_Alias	SU = /usr/bin/su
 Cmnd_Alias	PAGERS = /usr/bin/more, /usr/bin/pg, /usr/bin/less

Here we override some of the compiled in default values.  We want
B<sudo> to log via L<syslog(3)> using the I<auth> facility in all
cases.  We don't want to subject the full time staff to the B<sudo>
lecture, user B<millert> need not give a password, and we don't
want to reset the C<LOGNAME>, C<USER> or C<USERNAME> environment
variables when running commands as root.  Additionally, on the
machines in the I<SERVERS> C<Host_Alias>, we keep an additional
local log file and make sure we log the year in each log line since
the log entries will be kept around for several years.  Lastly, we
disable shell escapes for the commands in the PAGERS C<Cmnd_Alias>
(F</usr/bin/more>, F</usr/bin/pg> and F</usr/bin/less>).

 # Override built-in defaults
 Defaults		syslog=auth
 Defaults>root		!set_logname
 Defaults:FULLTIMERS	!lecture
 Defaults:millert	!authenticate
 Defaults@SERVERS	log_year, logfile=/var/log/sudo.log
 Defaults!PAGERS	noexec

The I<User specification> is the part that actually determines who may
run what.

 root		ALL = (ALL) ALL
 %wheel		ALL = (ALL) ALL

We let B<root> and any user in group B<wheel> run any command on any
host as any user.

 FULLTIMERS	ALL = NOPASSWD: ALL

Full time sysadmins (B<millert>, B<mikef>, and B<dowdy>) may run any
command on any host without authenticating themselves.

 PARTTIMERS	ALL = ALL

Part time sysadmins (B<bostley>, B<jwfox>, and B<crawl>) may run any
command on any host but they must authenticate themselves first
(since the entry lacks the C<NOPASSWD> tag).

 jack		CSNETS = ALL

The user B<jack> may run any command on the machines in the I<CSNETS> alias
(the networks C<128.138.243.0>, C<128.138.204.0>, and C<128.138.242.0>).
Of those networks, only C<128.138.204.0> has an explicit netmask (in
CIDR notation) indicating it is a class C network.  For the other
networks in I<CSNETS>, the local machine's netmask will be used
during matching.

 lisa		CUNETS = ALL

The user B<lisa> may run any command on any host in the I<CUNETS> alias
(the class B network C<128.138.0.0>).

 operator	ALL = DUMPS, KILL, SHUTDOWN, HALT, REBOOT, PRINTING,\
		sudoedit /etc/printcap, /usr/oper/bin/

The B<operator> user may run commands limited to simple maintenance.
Here, those are commands related to backups, killing processes, the
printing system, shutting down the system, and any commands in the
directory F</usr/oper/bin/>.

 joe		ALL = /usr/bin/su operator

The user B<joe> may only L<su(1)> to operator.

 pete		HPPA = /usr/bin/passwd [A-Za-z]*, !/usr/bin/passwd root

 %opers		ALL = (: ADMINGRP) /usr/sbin/

Users in the B<opers> group may run commands in F</usr/sbin/> as themselves
with any group in the I<ADMINGRP> C<Runas_Alias> (the B<adm> and B<oper>
groups).

The user B<pete> is allowed to change anyone's password except for
root on the I<HPPA> machines.  Note that this assumes L<passwd(1)>
does not take multiple usernames on the command line.

 bob		SPARC = (OP) ALL : SGI = (OP) ALL

The user B<bob> may run anything on the I<SPARC> and I<SGI> machines
as any user listed in the I<OP> C<Runas_Alias> (B<root> and B<operator>).

 jim		+biglab = ALL

The user B<jim> may run any command on machines in the I<biglab> netgroup.
B<sudo> knows that "biglab" is a netgroup due to the '+' prefix.

 +secretaries	ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser

Users in the B<secretaries> netgroup need to help manage the printers
as well as add and remove users, so they are allowed to run those
commands on all machines.

 fred		ALL = (DB) NOPASSWD: ALL

The user B<fred> can run commands as any user in the I<DB> C<Runas_Alias>
(B<oracle> or B<sybase>) without giving a password.

 john		ALPHA = /usr/bin/su [!-]*, !/usr/bin/su *root*

On the I<ALPHA> machines, user B<john> may su to anyone except root
but he is not allowed to specify any options to the L<su(1)> command.

 jen		ALL, !SERVERS = ALL

The user B<jen> may run any command on any machine except for those
in the I<SERVERS> C<Host_Alias> (master, mail, www and ns).

 jill		SERVERS = /usr/bin/, !SU, !SHELLS

For any machine in the I<SERVERS> C<Host_Alias>, B<jill> may run
any commands in the directory F</usr/bin/> except for those commands
belonging to the I<SU> and I<SHELLS> C<Cmnd_Aliases>.

 steve		CSNETS = (operator) /usr/local/op_commands/

The user B<steve> may run any command in the directory /usr/local/op_commands/
but only as user operator.

 matt		valkyrie = KILL

On his personal workstation, valkyrie, B<matt> needs to be able to
kill hung processes.

 WEBMASTERS	www = (www) ALL, (root) /usr/bin/su www

On the host www, any user in the I<WEBMASTERS> C<User_Alias> (will,
wendy, and wim), may run any command as user www (which owns the
web pages) or simply L<su(1)> to www.

 ALL		CDROM = NOPASSWD: /sbin/umount /CDROM,\
		/sbin/mount -o nosuid\,nodev /dev/cd0a /CDROM

Any user may mount or unmount a CD-ROM on the machines in the CDROM
C<Host_Alias> (orion, perseus, hercules) without entering a password.
This is a bit tedious for users to type, so it is a prime candidate
for encapsulating in a shell script.

=head1 SECURITY NOTES

It is generally not effective to "subtract" commands from C<ALL>
using the '!' operator.  A user can trivially circumvent this
by copying the desired command to a different name and then
executing that.  For example:

    bill	ALL = ALL, !SU, !SHELLS

Doesn't really prevent B<bill> from running the commands listed in
I<SU> or I<SHELLS> since he can simply copy those commands to a
different name, or use a shell escape from an editor or other
program.  Therefore, these kind of restrictions should be considered
advisory at best (and reinforced by policy).

=head1 PREVENTING SHELL ESCAPES

Once B<sudo> executes a program, that program is free to do whatever
it pleases, including run other programs.  This can be a security
issue since it is not uncommon for a program to allow shell escapes,
which lets a user bypass B<sudo>'s access control and logging.
Common programs that permit shell escapes include shells (obviously),
editors, paginators, mail and terminal programs.

There are two basic approaches to this problem:

=over 10

=item restrict

Avoid giving users access to commands that allow the user to run
arbitrary commands.  Many editors have a restricted mode where shell
escapes are disabled, though B<sudoedit> is a better solution to
running editors via B<sudo>.  Due to the large number of programs that
offer shell escapes, restricting users to the set of programs that
do not if often unworkable.

=item noexec

Many systems that support shared libraries have the ability to
override default library functions by pointing an environment
variable (usually C<LD_PRELOAD>) to an alternate shared library.
On such systems, B<sudo>'s I<noexec> functionality can be used to
prevent a program run by B<sudo> from executing any other programs.
Note, however, that this applies only to native dynamically-linked
executables.  Statically-linked executables and foreign executables
running under binary emulation are not affected.

To tell whether or not B<sudo> supports I<noexec>, you can run
the following as root:

    sudo -V | grep "dummy exec"

If the resulting output contains a line that begins with:

    File containing dummy exec functions:

then B<sudo> may be able to replace the exec family of functions
in the standard library with its own that simply return an error.
Unfortunately, there is no foolproof way to know whether or not
I<noexec> will work at compile-time.  I<noexec> should work on
SunOS, Solaris, *BSD, Linux, IRIX, Tru64 UNIX, MacOS X, and HP-UX
11.x.  It is known B<not> to work on AIX and UnixWare.  I<noexec>
is expected to work on most operating systems that support the
C<LD_PRELOAD> environment variable.  Check your operating system's
manual pages for the dynamic linker (usually ld.so, ld.so.1, dyld,
dld.sl, rld, or loader) to see if C<LD_PRELOAD> is supported.

To enable I<noexec> for a command, use the C<NOEXEC> tag as documented
in the User Specification section above.  Here is that example again:

 aaron	shanty = NOEXEC: /usr/bin/more, /usr/bin/vi

This allows user B<aaron> to run F</usr/bin/more> and F</usr/bin/vi>
with I<noexec> enabled.  This will prevent those two commands from
executing other commands (such as a shell).  If you are unsure
whether or not your system is capable of supporting I<noexec> you
can always just try it out and see if it works.

=back

Note that restricting shell escapes is not a panacea.  Programs
running as root are still capable of many potentially hazardous
operations (such as changing or overwriting files) that could lead
to unintended privilege escalation.  In the specific case of an
editor, a safer approach is to give the user permission to run
B<sudoedit>.

=head1 SEE ALSO

L<rsh(1)>, L<su(1)>, L<fnmatch(3)>, L<glob(3)>, L<sudo(8)>, L<visudo(8)>

=head1 CAVEATS

The I<sudoers> file should B<always> be edited by the B<visudo>
command which locks the file and does grammatical checking. It is
imperative that I<sudoers> be free of syntax errors since B<sudo>
will not run with a syntactically incorrect I<sudoers> file.

When using netgroups of machines (as opposed to users), if you
store fully qualified hostnames in the netgroup (as is usually the
case), you either need to have the machine's hostname be fully qualified
as returned by the C<hostname> command or use the I<fqdn> option in
I<sudoers>.

=head1 BUGS

If you feel you have found a bug in B<sudo>, please submit a bug report
at http://www.sudo.ws/sudo/bugs/

=head1 SUPPORT

Limited free support is available via the sudo-users mailing list,
see http://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or
search the archives.

=head1 DISCLAIMER

B<sudo> is provided ``AS IS'' and any express or implied warranties,
including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose are disclaimed.  See the LICENSE
file distributed with B<sudo> or http://www.sudo.ws/sudo/license.html
for complete details.