/* $OpenBSD: telnet.c,v 1.8 1999/12/30 16:58:22 itojun Exp $ */ /* $NetBSD: telnet.c,v 1.7 1996/02/28 21:04:15 thorpej Exp $ */ /* * Copyright (c) 1988, 1990, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "telnet_locl.h" #define strip(x) (eight ? (x) : ((x) & 0x7f)) static unsigned char subbuffer[SUBBUFSIZE], *subpointer, *subend; /* buffer for sub-options */ #define SB_CLEAR() subpointer = subbuffer; #define SB_TERM() { subend = subpointer; SB_CLEAR(); } #define SB_ACCUM(c) if (subpointer < (subbuffer+sizeof subbuffer)) { \ *subpointer++ = (c); \ } #define SB_GET() ((*subpointer++)&0xff) #define SB_PEEK() ((*subpointer)&0xff) #define SB_EOF() (subpointer >= subend) #define SB_LEN() (subend - subpointer) char options[256]; /* The combined options */ char do_dont_resp[256]; char will_wont_resp[256]; int eight = 3, binary = 0, autologin = 0, /* Autologin anyone? */ skiprc = 0, connected, showoptions, In3270, /* Are we in 3270 mode? */ ISend, /* trying to send network data in */ debug = 0, crmod, netdata, /* Print out network data flow */ crlf, /* Should '\r' be mapped to <CR><LF> (or <CR><NUL>)? */ #if defined(TN3270) noasynchtty = 0,/* User specified "-noasynch" on command line */ noasynchnet = 0,/* User specified "-noasynch" on command line */ askedSGA = 0, /* We have talked about suppress go ahead */ #endif /* defined(TN3270) */ telnetport, SYNCHing, /* we are in TELNET SYNCH mode */ flushout, /* flush output */ autoflush = 0, /* flush output when interrupting? */ autosynch, /* send interrupt characters with SYNCH? */ localflow, /* we handle flow control locally */ restartany, /* if flow control enabled, restart on any character */ localchars, /* we recognize interrupt/quit */ donelclchars, /* the user has set "localchars" */ donebinarytoggle, /* the user has put us in binary */ dontlecho, /* do we suppress local echoing right now? */ globalmode, clienteof = 0; char *prompt = 0; cc_t escape; cc_t rlogin; #ifdef KLUDGELINEMODE cc_t echoc; #endif /* * Telnet receiver states for fsm */ #define TS_DATA 0 #define TS_IAC 1 #define TS_WILL 2 #define TS_WONT 3 #define TS_DO 4 #define TS_DONT 5 #define TS_CR 6 #define TS_SB 7 /* sub-option collection */ #define TS_SE 8 /* looking for sub-option end */ static int telrcv_state; #ifdef OLD_ENVIRON unsigned char telopt_environ = TELOPT_NEW_ENVIRON; #else # define telopt_environ TELOPT_NEW_ENVIRON #endif jmp_buf toplevel = { 0 }; jmp_buf peerdied; int flushline; int linemode; #ifdef KLUDGELINEMODE int kludgelinemode = 1; #endif /* * The following are some clocks used to decide how to interpret * the relationship between various variables. */ Clocks clocks; /* * Initialize telnet environment. */ void init_telnet() { env_init(); SB_CLEAR(); memset((char *)options, 0, sizeof options); connected = In3270 = ISend = localflow = donebinarytoggle = 0; #if defined(AUTHENTICATION) || defined(ENCRYPTION) auth_encrypt_connect(connected); #endif /* defined(AUTHENTICATION) || defined(ENCRYPTION) */ restartany = -1; SYNCHing = 0; /* Don't change NetTrace */ escape = CONTROL(']'); rlogin = _POSIX_VDISABLE; #ifdef KLUDGELINEMODE echoc = CONTROL('E'); #endif flushline = 1; telrcv_state = TS_DATA; } /* * These routines are in charge of sending option negotiations * to the other side. * * The basic idea is that we send the negotiation if either side * is in disagreement as to what the current state should be. */ void send_do(c, init) register int c, init; { if (init) { if (((do_dont_resp[c] == 0) && my_state_is_do(c)) || my_want_state_is_do(c)) return; set_my_want_state_do(c); do_dont_resp[c]++; } NET2ADD(IAC, DO); NETADD(c); printoption("SENT", DO, c); } void send_dont(c, init) register int c, init; { if (init) { if (((do_dont_resp[c] == 0) && my_state_is_dont(c)) || my_want_state_is_dont(c)) return; set_my_want_state_dont(c); do_dont_resp[c]++; } NET2ADD(IAC, DONT); NETADD(c); printoption("SENT", DONT, c); } void send_will(c, init) register int c, init; { if (init) { if (((will_wont_resp[c] == 0) && my_state_is_will(c)) || my_want_state_is_will(c)) return; set_my_want_state_will(c); will_wont_resp[c]++; } NET2ADD(IAC, WILL); NETADD(c); printoption("SENT", WILL, c); } void send_wont(c, init) register int c, init; { if (init) { if (((will_wont_resp[c] == 0) && my_state_is_wont(c)) || my_want_state_is_wont(c)) return; set_my_want_state_wont(c); will_wont_resp[c]++; } NET2ADD(IAC, WONT); NETADD(c); printoption("SENT", WONT, c); } void willoption(option) int option; { int new_state_ok = 0; if (do_dont_resp[option]) { --do_dont_resp[option]; if (do_dont_resp[option] && my_state_is_do(option)) --do_dont_resp[option]; } if ((do_dont_resp[option] == 0) && my_want_state_is_dont(option)) { switch (option) { case TELOPT_ECHO: # if defined(TN3270) /* * The following is a pain in the rear-end. * Various IBM servers (some versions of Wiscnet, * possibly Fibronics/Spartacus, and who knows who * else) will NOT allow us to send "DO SGA" too early * in the setup proceedings. On the other hand, * 4.2 servers (telnetd) won't set SGA correctly. * So, we are stuck. Empirically (but, based on * a VERY small sample), the IBM servers don't send * out anything about ECHO, so we postpone our sending * "DO SGA" until we see "WILL ECHO" (which 4.2 servers * DO send). */ { if (askedSGA == 0) { askedSGA = 1; if (my_want_state_is_dont(TELOPT_SGA)) send_do(TELOPT_SGA, 1); } } /* Fall through */ case TELOPT_EOR: #endif /* defined(TN3270) */ case TELOPT_BINARY: case TELOPT_SGA: settimer(modenegotiated); /* FALL THROUGH */ case TELOPT_STATUS: #if defined(AUTHENTICATION) case TELOPT_AUTHENTICATION: #endif #if defined(ENCRYPTION) case TELOPT_ENCRYPT: #endif new_state_ok = 1; break; case TELOPT_TM: if (flushout) flushout = 0; /* * Special case for TM. If we get back a WILL, * pretend we got back a WONT. */ set_my_want_state_dont(option); set_my_state_dont(option); return; /* Never reply to TM will's/wont's */ case TELOPT_LINEMODE: default: break; } if (new_state_ok) { set_my_want_state_do(option); send_do(option, 0); setconnmode(0); /* possibly set new tty mode */ } else { do_dont_resp[option]++; send_dont(option, 0); } } set_my_state_do(option); #if defined(ENCRYPTION) if (option == TELOPT_ENCRYPT) encrypt_send_support(); #endif } void wontoption(option) int option; { if (do_dont_resp[option]) { --do_dont_resp[option]; if (do_dont_resp[option] && my_state_is_dont(option)) --do_dont_resp[option]; } if ((do_dont_resp[option] == 0) && my_want_state_is_do(option)) { switch (option) { #ifdef KLUDGELINEMODE case TELOPT_SGA: if (!kludgelinemode) break; /* FALL THROUGH */ #endif case TELOPT_ECHO: settimer(modenegotiated); break; case TELOPT_TM: if (flushout) flushout = 0; set_my_want_state_dont(option); set_my_state_dont(option); return; /* Never reply to TM will's/wont's */ #ifdef ENCRYPTION case TELOPT_ENCRYPT: encrypt_not(); break; #endif default: break; } set_my_want_state_dont(option); if (my_state_is_do(option)) send_dont(option, 0); setconnmode(0); /* Set new tty mode */ } else if (option == TELOPT_TM) { /* * Special case for TM. */ if (flushout) flushout = 0; set_my_want_state_dont(option); } set_my_state_dont(option); } static void dooption(option) int option; { int new_state_ok = 0; if (will_wont_resp[option]) { --will_wont_resp[option]; if (will_wont_resp[option] && my_state_is_will(option)) --will_wont_resp[option]; } if (will_wont_resp[option] == 0) { if (my_want_state_is_wont(option)) { switch (option) { case TELOPT_TM: /* * Special case for TM. We send a WILL, but pretend * we sent WONT. */ send_will(option, 0); set_my_want_state_wont(TELOPT_TM); set_my_state_wont(TELOPT_TM); return; # if defined(TN3270) case TELOPT_EOR: /* end of record */ # endif /* defined(TN3270) */ case TELOPT_BINARY: /* binary mode */ case TELOPT_NAWS: /* window size */ case TELOPT_TSPEED: /* terminal speed */ case TELOPT_LFLOW: /* local flow control */ case TELOPT_TTYPE: /* terminal type option */ case TELOPT_SGA: /* no big deal */ #if defined(ENCRYPTION) case TELOPT_ENCRYPT: /* encryption variable option */ #endif new_state_ok = 1; break; case TELOPT_NEW_ENVIRON: /* New environment variable option */ #ifdef OLD_ENVIRON if (my_state_is_will(TELOPT_OLD_ENVIRON)) send_wont(TELOPT_OLD_ENVIRON, 1); /* turn off the old */ goto env_common; case TELOPT_OLD_ENVIRON: /* Old environment variable option */ if (my_state_is_will(TELOPT_NEW_ENVIRON)) break; /* Don't enable if new one is in use! */ env_common: telopt_environ = option; #endif new_state_ok = 1; break; #if defined(AUTHENTICATION) case TELOPT_AUTHENTICATION: if (autologin) new_state_ok = 1; break; #endif case TELOPT_XDISPLOC: /* X Display location */ if (env_getvalue((unsigned char *)"DISPLAY")) new_state_ok = 1; break; case TELOPT_LINEMODE: #ifdef KLUDGELINEMODE kludgelinemode = 0; send_do(TELOPT_SGA, 1); #endif set_my_want_state_will(TELOPT_LINEMODE); send_will(option, 0); set_my_state_will(TELOPT_LINEMODE); slc_init(); return; case TELOPT_ECHO: /* We're never going to echo... */ default: break; } if (new_state_ok) { set_my_want_state_will(option); send_will(option, 0); setconnmode(0); /* Set new tty mode */ } else { will_wont_resp[option]++; send_wont(option, 0); } } else { /* * Handle options that need more things done after the * other side has acknowledged the option. */ switch (option) { case TELOPT_LINEMODE: #ifdef KLUDGELINEMODE kludgelinemode = 0; send_do(TELOPT_SGA, 1); #endif set_my_state_will(option); slc_init(); send_do(TELOPT_SGA, 0); return; } } } set_my_state_will(option); } static void dontoption(option) int option; { if (will_wont_resp[option]) { --will_wont_resp[option]; if (will_wont_resp[option] && my_state_is_wont(option)) --will_wont_resp[option]; } if ((will_wont_resp[option] == 0) && my_want_state_is_will(option)) { switch (option) { case TELOPT_LINEMODE: linemode = 0; /* put us back to the default state */ break; #ifdef OLD_ENVIRON case TELOPT_NEW_ENVIRON: /* * The new environ option wasn't recognized, try * the old one. */ send_will(TELOPT_OLD_ENVIRON, 1); telopt_environ = TELOPT_OLD_ENVIRON; break; #endif } /* we always accept a DONT */ set_my_want_state_wont(option); if (my_state_is_will(option)) send_wont(option, 0); setconnmode(0); /* Set new tty mode */ } set_my_state_wont(option); } /* * Given a buffer returned by tgetent(), this routine will turn * the pipe seperated list of names in the buffer into an array * of pointers to null terminated names. We toss out any bad, * duplicate, or verbose names (names with spaces). */ int is_unique P((char *, char **, char **)); static char *name_unknown = "UNKNOWN"; static char *unknown[] = { 0, 0 }; char ** mklist(buf, name) char *buf, *name; { register int n; register char c, *cp, **argvp, *cp2, **argv, **avt; if (name) { if ((int)strlen(name) > 40) { name = 0; unknown[0] = name_unknown; } else { unknown[0] = name; upcase(name); } } else unknown[0] = name_unknown; /* * Count up the number of names. */ for (n = 1, cp = buf; *cp && *cp != ':'; cp++) { if (*cp == '|') n++; } /* * Allocate an array to put the name pointers into */ argv = (char **)malloc((n+3)*sizeof(char *)); if (argv == 0) return(unknown); /* * Fill up the array of pointers to names. */ *argv = 0; argvp = argv+1; n = 0; for (cp = cp2 = buf; (c = *cp); cp++) { if (c == '|' || c == ':') { *cp++ = '\0'; /* * Skip entries that have spaces or are over 40 * characters long. If this is our environment * name, then put it up front. Otherwise, as * long as this is not a duplicate name (case * insensitive) add it to the list. */ if (n || (cp - cp2 > 41)) ; else if (name && (strncasecmp(name, cp2, cp-cp2) == 0)) *argv = cp2; else if (is_unique(cp2, argv+1, argvp)) *argvp++ = cp2; if (c == ':') break; /* * Skip multiple delimiters. Reset cp2 to * the beginning of the next name. Reset n, * the flag for names with spaces. */ while ((c = *cp) == '|') cp++; cp2 = cp; n = 0; } /* * Skip entries with spaces or non-ascii values. * Convert lower case letters to upper case. */ #define ISASCII(c) (!((c)&0x80)) if ((c == ' ') || !ISASCII(c)) n = 1; else if (islower(c)) *cp = toupper(c); } /* * Check for an old V6 2 character name. If the second * name points to the beginning of the buffer, and is * only 2 characters long, move it to the end of the array. */ if ((argv[1] == buf) && (strlen(argv[1]) == 2)) { --argvp; for (avt = &argv[1]; avt < argvp; avt++) *avt = *(avt+1); *argvp++ = buf; } /* * Duplicate last name, for TTYPE option, and null * terminate the array. If we didn't find a match on * our terminal name, put that name at the beginning. */ cp = *(argvp-1); *argvp++ = cp; *argvp = 0; if (*argv == 0) { if (name) *argv = name; else { --argvp; for (avt = argv; avt < argvp; avt++) *avt = *(avt+1); } } if (*argv) return(argv); else return(unknown); } int is_unique(name, as, ae) register char *name, **as, **ae; { register char **ap; register int n; n = strlen(name) + 1; for (ap = as; ap < ae; ap++) if (strncasecmp(*ap, name, n) == 0) return(0); return (1); } static char termbuf[1024]; /*ARGSUSED*/ int telnet_setupterm(tname, fd, errp) char *tname; int fd, *errp; { if (tgetent(termbuf, tname) == 1) { termbuf[1023] = '\0'; if (errp) *errp = 1; return(0); } if (errp) *errp = 0; return(-1); } int resettermname = 1; char * gettermname() { char *tname; static char **tnamep = 0; static char **next; int err; if (resettermname) { resettermname = 0; if (tnamep && tnamep != unknown) free(tnamep); if ((tname = (char *)env_getvalue((unsigned char *)"TERM")) && (telnet_setupterm(tname, 1, &err) == 0)) { tnamep = mklist(termbuf, tname); } else { if (tname && ((int)strlen(tname) <= 40)) { unknown[0] = tname; upcase(tname); } else unknown[0] = name_unknown; tnamep = unknown; } next = tnamep; } if (*next == 0) next = tnamep; return(*next++); } /* * suboption() * * Look at the sub-option buffer, and try to be helpful to the other * side. * * Currently we recognize: * * Terminal type, send request. * Terminal speed (send request). * Local flow control (is request). * Linemode */ static void suboption() { unsigned char subchar; printsub('<', subbuffer, SB_LEN()+2); switch (subchar = SB_GET()) { case TELOPT_TTYPE: if (my_want_state_is_wont(TELOPT_TTYPE)) return; if (SB_EOF() || SB_GET() != TELQUAL_SEND) { return; } else { char *name; unsigned char temp[50]; int len; #if defined(TN3270) if (tn3270_ttype()) { return; } #endif /* defined(TN3270) */ name = gettermname(); len = strlen(name) + 4 + 2; if (len < NETROOM()) { snprintf((char *)temp, sizeof(temp), "%c%c%c%c%s%c%c", IAC, SB, TELOPT_TTYPE, TELQUAL_IS, name, IAC, SE); ring_supply_data(&netoring, temp, len); printsub('>', &temp[2], len-2); } else { ExitString("No room in buffer for terminal type.\n", 1); /*NOTREACHED*/ } } break; case TELOPT_TSPEED: if (my_want_state_is_wont(TELOPT_TSPEED)) return; if (SB_EOF()) return; if (SB_GET() == TELQUAL_SEND) { long ospeed, ispeed; unsigned char temp[50]; int len; TerminalSpeeds(&ispeed, &ospeed); snprintf((char *)temp, sizeof(temp), "%c%c%c%c%ld,%ld%c%c", IAC, SB, TELOPT_TSPEED, TELQUAL_IS, ospeed, ispeed, IAC, SE); len = strlen((char *)temp+4) + 4; /* temp[3] is 0 ... */ if (len < NETROOM()) { ring_supply_data(&netoring, temp, len); printsub('>', temp+2, len - 2); } /*@*/ else printf("lm_will: not enough room in buffer\n"); } break; case TELOPT_LFLOW: if (my_want_state_is_wont(TELOPT_LFLOW)) return; if (SB_EOF()) return; switch(SB_GET()) { case LFLOW_RESTART_ANY: restartany = 1; break; case LFLOW_RESTART_XON: restartany = 0; break; case LFLOW_ON: localflow = 1; break; case LFLOW_OFF: localflow = 0; break; default: return; } setcommandmode(); setconnmode(0); break; case TELOPT_LINEMODE: if (my_want_state_is_wont(TELOPT_LINEMODE)) return; if (SB_EOF()) return; switch (SB_GET()) { case WILL: lm_will(subpointer, SB_LEN()); break; case WONT: lm_wont(subpointer, SB_LEN()); break; case DO: lm_do(subpointer, SB_LEN()); break; case DONT: lm_dont(subpointer, SB_LEN()); break; case LM_SLC: slc(subpointer, SB_LEN()); break; case LM_MODE: lm_mode(subpointer, SB_LEN(), 0); break; default: break; } break; #ifdef OLD_ENVIRON case TELOPT_OLD_ENVIRON: #endif case TELOPT_NEW_ENVIRON: if (SB_EOF()) return; switch(SB_PEEK()) { case TELQUAL_IS: case TELQUAL_INFO: if (my_want_state_is_dont(subchar)) return; break; case TELQUAL_SEND: if (my_want_state_is_wont(subchar)) { return; } break; default: return; } env_opt(subpointer, SB_LEN()); break; case TELOPT_XDISPLOC: if (my_want_state_is_wont(TELOPT_XDISPLOC)) return; if (SB_EOF()) return; if (SB_GET() == TELQUAL_SEND) { unsigned char temp[50], *dp; int len; if ((dp = env_getvalue((unsigned char *)"DISPLAY")) == NULL) { /* * Something happened, we no longer have a DISPLAY * variable. So, turn off the option. */ send_wont(TELOPT_XDISPLOC, 1); break; } snprintf((char *)temp, sizeof(temp), "%c%c%c%c%s%c%c", IAC, SB, TELOPT_XDISPLOC, TELQUAL_IS, dp, IAC, SE); len = strlen((char *)temp+4) + 4; /* temp[3] is 0 ... */ if (len < NETROOM()) { ring_supply_data(&netoring, temp, len); printsub('>', temp+2, len - 2); } /*@*/ else printf("lm_will: not enough room in buffer\n"); } break; #if defined(AUTHENTICATION) case TELOPT_AUTHENTICATION: { if (!autologin) break; if (SB_EOF()) return; switch(SB_GET()) { case TELQUAL_IS: if (my_want_state_is_dont(TELOPT_AUTHENTICATION)) return; auth_is(subpointer, SB_LEN()); break; case TELQUAL_SEND: if (my_want_state_is_wont(TELOPT_AUTHENTICATION)) return; auth_send(subpointer, SB_LEN()); break; case TELQUAL_REPLY: if (my_want_state_is_wont(TELOPT_AUTHENTICATION)) return; auth_reply(subpointer, SB_LEN()); break; case TELQUAL_NAME: if (my_want_state_is_dont(TELOPT_AUTHENTICATION)) return; auth_name(subpointer, SB_LEN()); break; } } break; #endif #if defined(ENCRYPTION) case TELOPT_ENCRYPT: if (SB_EOF()) return; switch(SB_GET()) { case ENCRYPT_START: if (my_want_state_is_dont(TELOPT_ENCRYPT)) return; encrypt_start(subpointer, SB_LEN()); break; case ENCRYPT_END: if (my_want_state_is_dont(TELOPT_ENCRYPT)) return; encrypt_end(); break; case ENCRYPT_SUPPORT: if (my_want_state_is_wont(TELOPT_ENCRYPT)) return; encrypt_support(subpointer, SB_LEN()); break; case ENCRYPT_REQSTART: if (my_want_state_is_wont(TELOPT_ENCRYPT)) return; encrypt_request_start(subpointer, SB_LEN()); break; case ENCRYPT_REQEND: if (my_want_state_is_wont(TELOPT_ENCRYPT)) return; /* * We can always send an REQEND so that we cannot * get stuck encrypting. We should only get this * if we have been able to get in the correct mode * anyhow. */ encrypt_request_end(); break; case ENCRYPT_IS: if (my_want_state_is_dont(TELOPT_ENCRYPT)) return; encrypt_is(subpointer, SB_LEN()); break; case ENCRYPT_REPLY: if (my_want_state_is_wont(TELOPT_ENCRYPT)) return; encrypt_reply(subpointer, SB_LEN()); break; case ENCRYPT_ENC_KEYID: if (my_want_state_is_dont(TELOPT_ENCRYPT)) return; encrypt_enc_keyid(subpointer, SB_LEN()); break; case ENCRYPT_DEC_KEYID: if (my_want_state_is_wont(TELOPT_ENCRYPT)) return; encrypt_dec_keyid(subpointer, SB_LEN()); break; default: break; } break; #endif default: break; } } static unsigned char str_lm[] = { IAC, SB, TELOPT_LINEMODE, 0, 0, IAC, SE }; void lm_will(cmd, len) unsigned char *cmd; int len; { if (len < 1) { /*@*/ printf("lm_will: no command!!!\n"); /* Should not happen... */ return; } switch(cmd[0]) { case LM_FORWARDMASK: /* We shouldn't ever get this... */ default: str_lm[3] = DONT; str_lm[4] = cmd[0]; if (NETROOM() > sizeof(str_lm)) { ring_supply_data(&netoring, str_lm, sizeof(str_lm)); printsub('>', &str_lm[2], sizeof(str_lm)-2); } /*@*/ else printf("lm_will: not enough room in buffer\n"); break; } } void lm_wont(cmd, len) unsigned char *cmd; int len; { if (len < 1) { /*@*/ printf("lm_wont: no command!!!\n"); /* Should not happen... */ return; } switch(cmd[0]) { case LM_FORWARDMASK: /* We shouldn't ever get this... */ default: /* We are always DONT, so don't respond */ return; } } void lm_do(cmd, len) unsigned char *cmd; int len; { if (len < 1) { /*@*/ printf("lm_do: no command!!!\n"); /* Should not happen... */ return; } switch(cmd[0]) { case LM_FORWARDMASK: default: str_lm[3] = WONT; str_lm[4] = cmd[0]; if (NETROOM() > sizeof(str_lm)) { ring_supply_data(&netoring, str_lm, sizeof(str_lm)); printsub('>', &str_lm[2], sizeof(str_lm)-2); } /*@*/ else printf("lm_do: not enough room in buffer\n"); break; } } void lm_dont(cmd, len) unsigned char *cmd; int len; { if (len < 1) { /*@*/ printf("lm_dont: no command!!!\n"); /* Should not happen... */ return; } switch(cmd[0]) { case LM_FORWARDMASK: default: /* we are always WONT, so don't respond */ break; } } static unsigned char str_lm_mode[] = { IAC, SB, TELOPT_LINEMODE, LM_MODE, 0, IAC, SE }; void lm_mode(cmd, len, init) unsigned char *cmd; int len, init; { if (len != 1) return; if ((linemode&MODE_MASK&~MODE_ACK) == *cmd) return; if (*cmd&MODE_ACK) return; linemode = *cmd&(MODE_MASK&~MODE_ACK); str_lm_mode[4] = linemode; if (!init) str_lm_mode[4] |= MODE_ACK; if (NETROOM() > sizeof(str_lm_mode)) { ring_supply_data(&netoring, str_lm_mode, sizeof(str_lm_mode)); printsub('>', &str_lm_mode[2], sizeof(str_lm_mode)-2); } /*@*/ else printf("lm_mode: not enough room in buffer\n"); setconnmode(0); /* set changed mode */ } /* * slc() * Handle special character suboption of LINEMODE. */ struct spc { cc_t val; cc_t *valp; char flags; /* Current flags & level */ char mylevel; /* Maximum level & flags */ } spc_data[NSLC+1]; #define SLC_IMPORT 0 #define SLC_EXPORT 1 #define SLC_RVALUE 2 static int slc_mode = SLC_EXPORT; void slc_init() { register struct spc *spcp; localchars = 1; for (spcp = spc_data; spcp < &spc_data[NSLC+1]; spcp++) { spcp->val = 0; spcp->valp = 0; spcp->flags = spcp->mylevel = SLC_NOSUPPORT; } #define initfunc(func, flags) { \ spcp = &spc_data[func]; \ if ((spcp->valp = tcval(func))) { \ spcp->val = *spcp->valp; \ spcp->mylevel = SLC_VARIABLE|flags; \ } else { \ spcp->val = 0; \ spcp->mylevel = SLC_DEFAULT; \ } \ } initfunc(SLC_SYNCH, 0); /* No BRK */ initfunc(SLC_AO, 0); initfunc(SLC_AYT, 0); /* No EOR */ initfunc(SLC_ABORT, SLC_FLUSHIN|SLC_FLUSHOUT); initfunc(SLC_EOF, 0); #ifndef SYSV_TERMIO initfunc(SLC_SUSP, SLC_FLUSHIN); #endif initfunc(SLC_EC, 0); initfunc(SLC_EL, 0); #ifndef SYSV_TERMIO initfunc(SLC_EW, 0); initfunc(SLC_RP, 0); initfunc(SLC_LNEXT, 0); #endif initfunc(SLC_XON, 0); initfunc(SLC_XOFF, 0); #ifdef SYSV_TERMIO spc_data[SLC_XON].mylevel = SLC_CANTCHANGE; spc_data[SLC_XOFF].mylevel = SLC_CANTCHANGE; #endif initfunc(SLC_FORW1, 0); #ifdef USE_TERMIO initfunc(SLC_FORW2, 0); /* No FORW2 */ #endif initfunc(SLC_IP, SLC_FLUSHIN|SLC_FLUSHOUT); #undef initfunc if (slc_mode == SLC_EXPORT) slc_export(); else slc_import(1); } void slcstate() { printf("Special characters are %s values\n", slc_mode == SLC_IMPORT ? "remote default" : slc_mode == SLC_EXPORT ? "local" : "remote"); } void slc_mode_export() { slc_mode = SLC_EXPORT; if (my_state_is_will(TELOPT_LINEMODE)) slc_export(); } void slc_mode_import(def) int def; { slc_mode = def ? SLC_IMPORT : SLC_RVALUE; if (my_state_is_will(TELOPT_LINEMODE)) slc_import(def); } unsigned char slc_import_val[] = { IAC, SB, TELOPT_LINEMODE, LM_SLC, 0, SLC_VARIABLE, 0, IAC, SE }; unsigned char slc_import_def[] = { IAC, SB, TELOPT_LINEMODE, LM_SLC, 0, SLC_DEFAULT, 0, IAC, SE }; void slc_import(def) int def; { if (NETROOM() > sizeof(slc_import_val)) { if (def) { ring_supply_data(&netoring, slc_import_def, sizeof(slc_import_def)); printsub('>', &slc_import_def[2], sizeof(slc_import_def)-2); } else { ring_supply_data(&netoring, slc_import_val, sizeof(slc_import_val)); printsub('>', &slc_import_val[2], sizeof(slc_import_val)-2); } } /*@*/ else printf("slc_import: not enough room\n"); } void slc_export() { register struct spc *spcp; TerminalDefaultChars(); slc_start_reply(); for (spcp = &spc_data[1]; spcp < &spc_data[NSLC+1]; spcp++) { if (spcp->mylevel != SLC_NOSUPPORT) { if (spcp->val == (cc_t)(_POSIX_VDISABLE)) spcp->flags = SLC_NOSUPPORT; else spcp->flags = spcp->mylevel; if (spcp->valp) spcp->val = *spcp->valp; slc_add_reply(spcp - spc_data, spcp->flags, spcp->val); } } slc_end_reply(); (void)slc_update(); setconnmode(1); /* Make sure the character values are set */ } void slc(cp, len) register unsigned char *cp; int len; { register struct spc *spcp; register int func,level; slc_start_reply(); for (; len >= 3; len -=3, cp +=3) { func = cp[SLC_FUNC]; if (func == 0) { /* * Client side: always ignore 0 function. */ continue; } if (func > NSLC) { if ((cp[SLC_FLAGS] & SLC_LEVELBITS) != SLC_NOSUPPORT) slc_add_reply(func, SLC_NOSUPPORT, 0); continue; } spcp = &spc_data[func]; level = cp[SLC_FLAGS]&(SLC_LEVELBITS|SLC_ACK); if ((cp[SLC_VALUE] == (unsigned char)spcp->val) && ((level&SLC_LEVELBITS) == (spcp->flags&SLC_LEVELBITS))) { continue; } if (level == (SLC_DEFAULT|SLC_ACK)) { /* * This is an error condition, the SLC_ACK * bit should never be set for the SLC_DEFAULT * level. Our best guess to recover is to * ignore the SLC_ACK bit. */ cp[SLC_FLAGS] &= ~SLC_ACK; } if (level == ((spcp->flags&SLC_LEVELBITS)|SLC_ACK)) { spcp->val = (cc_t)cp[SLC_VALUE]; spcp->flags = cp[SLC_FLAGS]; /* include SLC_ACK */ continue; } level &= ~SLC_ACK; if (level <= (spcp->mylevel&SLC_LEVELBITS)) { spcp->flags = cp[SLC_FLAGS]|SLC_ACK; spcp->val = (cc_t)cp[SLC_VALUE]; } if (level == SLC_DEFAULT) { if ((spcp->mylevel&SLC_LEVELBITS) != SLC_DEFAULT) spcp->flags = spcp->mylevel; else spcp->flags = SLC_NOSUPPORT; } slc_add_reply(func, spcp->flags, spcp->val); } slc_end_reply(); if (slc_update()) setconnmode(1); /* set the new character values */ } void slc_check() { register struct spc *spcp; slc_start_reply(); for (spcp = &spc_data[1]; spcp < &spc_data[NSLC+1]; spcp++) { if (spcp->valp && spcp->val != *spcp->valp) { spcp->val = *spcp->valp; if (spcp->val == (cc_t)(_POSIX_VDISABLE)) spcp->flags = SLC_NOSUPPORT; else spcp->flags = spcp->mylevel; slc_add_reply(spcp - spc_data, spcp->flags, spcp->val); } } slc_end_reply(); setconnmode(1); } unsigned char slc_reply[128]; unsigned char *slc_replyp; void slc_start_reply() { slc_replyp = slc_reply; *slc_replyp++ = IAC; *slc_replyp++ = SB; *slc_replyp++ = TELOPT_LINEMODE; *slc_replyp++ = LM_SLC; } void slc_add_reply(func, flags, value) unsigned char func; unsigned char flags; cc_t value; { if ((*slc_replyp++ = func) == IAC) *slc_replyp++ = IAC; if ((*slc_replyp++ = flags) == IAC) *slc_replyp++ = IAC; if ((*slc_replyp++ = (unsigned char)value) == IAC) *slc_replyp++ = IAC; } void slc_end_reply() { register int len; *slc_replyp++ = IAC; *slc_replyp++ = SE; len = slc_replyp - slc_reply; if (len <= 6) return; if (NETROOM() > len) { ring_supply_data(&netoring, slc_reply, slc_replyp - slc_reply); printsub('>', &slc_reply[2], slc_replyp - slc_reply - 2); } /*@*/else printf("slc_end_reply: not enough room\n"); } int slc_update() { register struct spc *spcp; int need_update = 0; for (spcp = &spc_data[1]; spcp < &spc_data[NSLC+1]; spcp++) { if (!(spcp->flags&SLC_ACK)) continue; spcp->flags &= ~SLC_ACK; if (spcp->valp && (*spcp->valp != spcp->val)) { *spcp->valp = spcp->val; need_update = 1; } } return(need_update); } #ifdef OLD_ENVIRON # ifdef ENV_HACK /* * Earlier version of telnet/telnetd from the BSD code had * the definitions of VALUE and VAR reversed. To ensure * maximum interoperability, we assume that the server is * an older BSD server, until proven otherwise. The newer * BSD servers should be able to handle either definition, * so it is better to use the wrong values if we don't * know what type of server it is. */ int env_auto = 1; int old_env_var = OLD_ENV_VAR; int old_env_value = OLD_ENV_VALUE; # else # define old_env_var OLD_ENV_VAR # define old_env_value OLD_ENV_VALUE # endif #endif void env_opt(buf, len) register unsigned char *buf; register int len; { register unsigned char *ep = 0, *epc = 0; register int i; switch(buf[0]&0xff) { case TELQUAL_SEND: env_opt_start(); if (len == 1) { env_opt_add(NULL); } else for (i = 1; i < len; i++) { switch (buf[i]&0xff) { #ifdef OLD_ENVIRON case OLD_ENV_VAR: # ifdef ENV_HACK if (telopt_environ == TELOPT_OLD_ENVIRON && env_auto) { /* Server has the same definitions */ old_env_var = OLD_ENV_VAR; old_env_value = OLD_ENV_VALUE; } /* FALL THROUGH */ # endif case OLD_ENV_VALUE: /* * Although OLD_ENV_VALUE is not legal, we will * still recognize it, just in case it is an * old server that has VAR & VALUE mixed up... */ /* FALL THROUGH */ #else case NEW_ENV_VAR: #endif case ENV_USERVAR: if (ep) { *epc = 0; env_opt_add(ep); } ep = epc = &buf[i+1]; break; case ENV_ESC: i++; /*FALL THROUGH*/ default: if (epc) *epc++ = buf[i]; break; } } if (ep) { *epc = 0; env_opt_add(ep); } env_opt_end(1); break; case TELQUAL_IS: case TELQUAL_INFO: /* Ignore for now. We shouldn't get it anyway. */ break; default: break; } } #define OPT_REPLY_SIZE 256 unsigned char *opt_reply; unsigned char *opt_replyp; unsigned char *opt_replyend; void env_opt_start() { unsigned char *p; if (opt_reply) { p = (unsigned char *)realloc(opt_reply, OPT_REPLY_SIZE); if (p == NULL) free(opt_reply); } else p = (unsigned char *)malloc(OPT_REPLY_SIZE); opt_reply = p; if (opt_reply == NULL) { /*@*/ printf("env_opt_start: malloc()/realloc() failed!!!\n"); opt_reply = opt_replyp = opt_replyend = NULL; return; } opt_replyp = opt_reply; opt_replyend = opt_reply + OPT_REPLY_SIZE; *opt_replyp++ = IAC; *opt_replyp++ = SB; *opt_replyp++ = telopt_environ; *opt_replyp++ = TELQUAL_IS; } void env_opt_start_info() { env_opt_start(); if (opt_replyp) opt_replyp[-1] = TELQUAL_INFO; } void env_opt_add(ep) register unsigned char *ep; { register unsigned char *vp, c; if (opt_reply == NULL) /*XXX*/ return; /*XXX*/ if (ep == NULL || *ep == '\0') { /* Send user defined variables first. */ env_default(1, 0); while ((ep = env_default(0, 0))) env_opt_add(ep); /* Now add the list of well know variables. */ env_default(1, 1); while ((ep = env_default(0, 1))) env_opt_add(ep); return; } vp = env_getvalue(ep); if (opt_replyp + (vp ? strlen((char *)vp) : 0) + strlen((char *)ep) + 6 > opt_replyend) { register int len; unsigned char *p; opt_replyend += OPT_REPLY_SIZE; len = opt_replyend - opt_reply; p = (unsigned char *)realloc(opt_reply, len); if (p == NULL) free(opt_reply); opt_reply = p; if (opt_reply == NULL) { /*@*/ printf("env_opt_add: realloc() failed!!!\n"); opt_reply = opt_replyp = opt_replyend = NULL; return; } opt_replyp = opt_reply + len - (opt_replyend - opt_replyp); opt_replyend = opt_reply + len; } if (opt_welldefined((char *)ep)) #ifdef OLD_ENVIRON if (telopt_environ == TELOPT_OLD_ENVIRON) *opt_replyp++ = old_env_var; else #endif *opt_replyp++ = NEW_ENV_VAR; else *opt_replyp++ = ENV_USERVAR; for (;;) { while ((c = *ep++)) { switch(c&0xff) { case IAC: *opt_replyp++ = IAC; break; case NEW_ENV_VAR: case NEW_ENV_VALUE: case ENV_ESC: case ENV_USERVAR: *opt_replyp++ = ENV_ESC; break; } *opt_replyp++ = c; } if ((ep = vp)) { #ifdef OLD_ENVIRON if (telopt_environ == TELOPT_OLD_ENVIRON) *opt_replyp++ = old_env_value; else #endif *opt_replyp++ = NEW_ENV_VALUE; vp = NULL; } else break; } } int opt_welldefined(ep) char *ep; { if ((strcmp(ep, "USER") == 0) || (strcmp(ep, "DISPLAY") == 0) || (strcmp(ep, "PRINTER") == 0) || (strcmp(ep, "SYSTEMTYPE") == 0) || (strcmp(ep, "JOB") == 0) || (strcmp(ep, "ACCT") == 0)) return(1); return(0); } void env_opt_end(emptyok) register int emptyok; { register int len; len = opt_replyp - opt_reply + 2; if (emptyok || len > 6) { *opt_replyp++ = IAC; *opt_replyp++ = SE; if (NETROOM() > len) { ring_supply_data(&netoring, opt_reply, len); printsub('>', &opt_reply[2], len - 2); } /*@*/ else printf("slc_end_reply: not enough room\n"); } if (opt_reply) { free(opt_reply); opt_reply = opt_replyp = opt_replyend = NULL; } } int telrcv() { register int c; register int scc; register unsigned char *sbp; int count; int returnValue = 0; scc = 0; count = 0; while (TTYROOM() > 2) { if (scc == 0) { if (count) { ring_consumed(&netiring, count); returnValue = 1; count = 0; } sbp = netiring.consume; scc = ring_full_consecutive(&netiring); if (scc == 0) { /* No more data coming in */ break; } } c = *sbp++ & 0xff, scc--; count++; #if defined(ENCRYPTION) if (decrypt_input) c = (*decrypt_input)(c); #endif switch (telrcv_state) { case TS_CR: telrcv_state = TS_DATA; if (c == '\0') { break; /* Ignore \0 after CR */ } else if ((c == '\n') && my_want_state_is_dont(TELOPT_ECHO) && !crmod) { TTYADD(c); break; } /* Else, fall through */ case TS_DATA: if (c == IAC) { telrcv_state = TS_IAC; break; } # if defined(TN3270) if (In3270) { *Ifrontp++ = c; while (scc > 0) { c = *sbp++ & 0377, scc--; count++; if (c == IAC) { telrcv_state = TS_IAC; break; } *Ifrontp++ = c; } } else # endif /* defined(TN3270) */ /* * The 'crmod' hack (see following) is needed * since we can't set CRMOD on output only. * Machines like MULTICS like to send \r without * \n; since we must turn off CRMOD to get proper * input, the mapping is done here (sigh). */ if ((c == '\r') && my_want_state_is_dont(TELOPT_BINARY)) { if (scc > 0) { c = *sbp&0xff; #if defined(ENCRYPTION) if (decrypt_input) c = (*decrypt_input)(c); #endif if (c == 0) { sbp++, scc--; count++; /* a "true" CR */ TTYADD('\r'); } else if (my_want_state_is_dont(TELOPT_ECHO) && (c == '\n')) { sbp++, scc--; count++; TTYADD('\n'); } else { #if defined(ENCRYPTION) if (decrypt_input) (*decrypt_input)(-1); #endif TTYADD('\r'); if (crmod) { TTYADD('\n'); } } } else { telrcv_state = TS_CR; TTYADD('\r'); if (crmod) { TTYADD('\n'); } } } else { TTYADD(c); } continue; case TS_IAC: process_iac: switch (c) { case WILL: telrcv_state = TS_WILL; continue; case WONT: telrcv_state = TS_WONT; continue; case DO: telrcv_state = TS_DO; continue; case DONT: telrcv_state = TS_DONT; continue; case DM: /* * We may have missed an urgent notification, * so make sure we flush whatever is in the * buffer currently. */ printoption("RCVD", IAC, DM); SYNCHing = 1; (void) ttyflush(1); SYNCHing = stilloob(); settimer(gotDM); break; case SB: SB_CLEAR(); telrcv_state = TS_SB; continue; # if defined(TN3270) case EOR: if (In3270) { if (Ibackp == Ifrontp) { Ibackp = Ifrontp = Ibuf; ISend = 0; /* should have been! */ } else { Ibackp += DataFromNetwork(Ibackp, Ifrontp-Ibackp, 1); ISend = 1; } } printoption("RCVD", IAC, EOR); break; # endif /* defined(TN3270) */ case IAC: # if !defined(TN3270) TTYADD(IAC); # else /* !defined(TN3270) */ if (In3270) { *Ifrontp++ = IAC; } else { TTYADD(IAC); } # endif /* !defined(TN3270) */ break; case NOP: case GA: default: printoption("RCVD", IAC, c); break; } telrcv_state = TS_DATA; continue; case TS_WILL: printoption("RCVD", WILL, c); willoption(c); SetIn3270(); telrcv_state = TS_DATA; continue; case TS_WONT: printoption("RCVD", WONT, c); wontoption(c); SetIn3270(); telrcv_state = TS_DATA; continue; case TS_DO: printoption("RCVD", DO, c); dooption(c); SetIn3270(); if (c == TELOPT_NAWS) { sendnaws(); } else if (c == TELOPT_LFLOW) { localflow = 1; setcommandmode(); setconnmode(0); } telrcv_state = TS_DATA; continue; case TS_DONT: printoption("RCVD", DONT, c); dontoption(c); flushline = 1; setconnmode(0); /* set new tty mode (maybe) */ SetIn3270(); telrcv_state = TS_DATA; continue; case TS_SB: if (c == IAC) { telrcv_state = TS_SE; } else { SB_ACCUM(c); } continue; case TS_SE: if (c != SE) { if (c != IAC) { /* * This is an error. We only expect to get * "IAC IAC" or "IAC SE". Several things may * have happend. An IAC was not doubled, the * IAC SE was left off, or another option got * inserted into the suboption are all possibilities. * If we assume that the IAC was not doubled, * and really the IAC SE was left off, we could * get into an infinate loop here. So, instead, * we terminate the suboption, and process the * partial suboption if we can. */ SB_ACCUM(IAC); SB_ACCUM(c); subpointer -= 2; SB_TERM(); printoption("In SUBOPTION processing, RCVD", IAC, c); suboption(); /* handle sub-option */ SetIn3270(); telrcv_state = TS_IAC; goto process_iac; } SB_ACCUM(c); telrcv_state = TS_SB; } else { SB_ACCUM(IAC); SB_ACCUM(SE); subpointer -= 2; SB_TERM(); suboption(); /* handle sub-option */ SetIn3270(); telrcv_state = TS_DATA; } } } if (count) ring_consumed(&netiring, count); return returnValue||count; } static int bol = 1, local = 0; int rlogin_susp() { if (local) { local = 0; bol = 1; command(0, "z\n", 2); return(1); } return(0); } static int telsnd() { int tcc; int count; int returnValue = 0; unsigned char *tbp; tcc = 0; count = 0; while (NETROOM() > 2) { register int sc; register int c; if (tcc == 0) { if (count) { ring_consumed(&ttyiring, count); returnValue = 1; count = 0; } tbp = ttyiring.consume; tcc = ring_full_consecutive(&ttyiring); if (tcc == 0) { break; } } c = *tbp++ & 0xff, sc = strip(c), tcc--; count++; if (rlogin != _POSIX_VDISABLE) { if (bol) { bol = 0; if (sc == rlogin) { local = 1; continue; } } else if (local) { local = 0; if (sc == '.' || c == termEofChar) { bol = 1; command(0, "close\n", 6); continue; } if (sc == termSuspChar) { bol = 1; command(0, "z\n", 2); continue; } if (sc == escape) { command(0, (char *)tbp, tcc); bol = 1; count += tcc; tcc = 0; flushline = 1; break; } if (sc != rlogin) { ++tcc; --tbp; --count; c = sc = rlogin; } } if ((sc == '\n') || (sc == '\r')) bol = 1; } else if (escape != _POSIX_VDISABLE && sc == escape) { /* * Double escape is a pass through of a single escape character. */ if (tcc && strip(*tbp) == escape) { tbp++; tcc--; count++; bol = 0; } else { command(0, (char *)tbp, tcc); bol = 1; count += tcc; tcc = 0; flushline = 1; break; } } else bol = 0; #ifdef KLUDGELINEMODE if (kludgelinemode && (globalmode&MODE_EDIT) && (sc == echoc)) { if (tcc > 0 && strip(*tbp) == echoc) { tcc--; tbp++; count++; } else { dontlecho = !dontlecho; settimer(echotoggle); setconnmode(0); flushline = 1; break; } } #endif if (sc != _POSIX_VDISABLE && MODE_LOCAL_CHARS(globalmode)) { if (TerminalSpecialChars(sc) == 0) { bol = 1; break; } } if (my_want_state_is_wont(TELOPT_BINARY)) { switch (c) { case '\n': /* * If we are in CRMOD mode (\r ==> \n) * on our local machine, then probably * a newline (unix) is CRLF (TELNET). */ if (MODE_LOCAL_CHARS(globalmode)) { NETADD('\r'); } NETADD('\n'); bol = flushline = 1; break; case '\r': if (!crlf) { NET2ADD('\r', '\0'); } else { NET2ADD('\r', '\n'); } bol = flushline = 1; break; case IAC: NET2ADD(IAC, IAC); break; default: NETADD(c); break; } } else if (c == IAC) { NET2ADD(IAC, IAC); } else { NETADD(c); } } if (count) ring_consumed(&ttyiring, count); return returnValue||count; /* Non-zero if we did anything */ } /* * Scheduler() * * Try to do something. * * If we do something useful, return 1; else return 0. * */ int Scheduler(block) int block; /* should we block in the select ? */ { /* One wants to be a bit careful about setting returnValue * to one, since a one implies we did some useful work, * and therefore probably won't be called to block next * time (TN3270 mode only). */ int returnValue; int netin, netout, netex, ttyin, ttyout; /* Decide which rings should be processed */ netout = ring_full_count(&netoring) && (flushline || (my_want_state_is_wont(TELOPT_LINEMODE) #ifdef KLUDGELINEMODE && (!kludgelinemode || my_want_state_is_do(TELOPT_SGA)) #endif ) || my_want_state_is_will(TELOPT_BINARY)); ttyout = ring_full_count(&ttyoring); #if defined(TN3270) ttyin = ring_empty_count(&ttyiring) && (clienteof == 0) && (shell_active == 0); #else /* defined(TN3270) */ ttyin = ring_empty_count(&ttyiring) && (clienteof == 0); #endif /* defined(TN3270) */ #if defined(TN3270) netin = ring_empty_count(&netiring); # else /* !defined(TN3270) */ netin = !ISend && ring_empty_count(&netiring); # endif /* !defined(TN3270) */ netex = !SYNCHing; /* If we have seen a signal recently, reset things */ # if defined(TN3270) && defined(unix) if (HaveInput) { HaveInput = 0; (void) signal(SIGIO, inputAvailable); } #endif /* defined(TN3270) && defined(unix) */ /* Call to system code to process rings */ returnValue = process_rings(netin, netout, netex, ttyin, ttyout, !block); /* Now, look at the input rings, looking for work to do. */ if (ring_full_count(&ttyiring)) { # if defined(TN3270) if (In3270) { int c; c = DataFromTerminal(ttyiring.consume, ring_full_consecutive(&ttyiring)); if (c) { returnValue = 1; ring_consumed(&ttyiring, c); } } else { # endif /* defined(TN3270) */ returnValue |= telsnd(); # if defined(TN3270) } # endif /* defined(TN3270) */ } if (ring_full_count(&netiring)) { # if !defined(TN3270) returnValue |= telrcv(); # else /* !defined(TN3270) */ returnValue = Push3270(); # endif /* !defined(TN3270) */ } return returnValue; } /* * Select from tty and network... */ void telnet(user) char *user; { sys_telnet_init(); #if defined(AUTHENTICATION) || defined(ENCRYPTION) { static char local_host[256] = { 0 }; if (!local_host[0]) { gethostname(local_host, sizeof(local_host)); local_host[sizeof(local_host)-1] = 0; } auth_encrypt_init(local_host, hostname, "TELNET", 0); auth_encrypt_user(user); } #endif /* defined(AUTHENTICATION) || defined(ENCRYPTION) */ # if !defined(TN3270) if (telnetport) { #if defined(AUTHENTICATION) if (autologin) send_will(TELOPT_AUTHENTICATION, 1); #endif #if defined(ENCRYPTION) send_do(TELOPT_ENCRYPT, 1); send_will(TELOPT_ENCRYPT, 1); #endif send_do(TELOPT_SGA, 1); send_will(TELOPT_TTYPE, 1); send_will(TELOPT_NAWS, 1); send_will(TELOPT_TSPEED, 1); send_will(TELOPT_LFLOW, 1); send_will(TELOPT_LINEMODE, 1); send_will(TELOPT_NEW_ENVIRON, 1); send_do(TELOPT_STATUS, 1); if (env_getvalue((unsigned char *)"DISPLAY")) send_will(TELOPT_XDISPLOC, 1); if (binary) tel_enter_binary(binary); } # endif /* !defined(TN3270) */ # if !defined(TN3270) for (;;) { int schedValue; while ((schedValue = Scheduler(0)) != 0) { if (schedValue == -1) { setcommandmode(); return; } } if (Scheduler(1) == -1) { setcommandmode(); return; } } # else /* !defined(TN3270) */ for (;;) { int schedValue; while (!In3270 && !shell_active) { if (Scheduler(1) == -1) { setcommandmode(); return; } } while ((schedValue = Scheduler(0)) != 0) { if (schedValue == -1) { setcommandmode(); return; } } /* If there is data waiting to go out to terminal, don't * schedule any more data for the terminal. */ if (ring_full_count(&ttyoring)) { schedValue = 1; } else { if (shell_active) { if (shell_continue() == 0) { ConnectScreen(); } } else if (In3270) { schedValue = DoTerminalOutput(); } } if (schedValue && (shell_active == 0)) { if (Scheduler(1) == -1) { setcommandmode(); return; } } } # endif /* !defined(TN3270) */ } #if 0 /* XXX - this not being in is a bug */ /* * nextitem() * * Return the address of the next "item" in the TELNET data * stream. This will be the address of the next character if * the current address is a user data character, or it will * be the address of the character following the TELNET command * if the current address is a TELNET IAC ("I Am a Command") * character. */ static char * nextitem(current) char *current; { if ((*current&0xff) != IAC) { return current+1; } switch (*(current+1)&0xff) { case DO: case DONT: case WILL: case WONT: return current+3; case SB: /* loop forever looking for the SE */ { register char *look = current+2; for (;;) { if ((*look++&0xff) == IAC) { if ((*look++&0xff) == SE) { return look; } } } } default: return current+2; } } #endif /* 0 */ /* * netclear() * * We are about to do a TELNET SYNCH operation. Clear * the path to the network. * * Things are a bit tricky since we may have sent the first * byte or so of a previous TELNET command into the network. * So, we have to scan the network buffer from the beginning * until we are up to where we want to be. * * A side effect of what we do, just to keep things * simple, is to clear the urgent data pointer. The principal * caller should be setting the urgent data pointer AFTER calling * us in any case. */ static void netclear() { #if 0 /* XXX */ register char *thisitem, *next; char *good; #define wewant(p) ((nfrontp > p) && ((*p&0xff) == IAC) && \ ((*(p+1)&0xff) != EC) && ((*(p+1)&0xff) != EL)) thisitem = netobuf; while ((next = nextitem(thisitem)) <= netobuf.send) { thisitem = next; } /* Now, thisitem is first before/at boundary. */ good = netobuf; /* where the good bytes go */ while (netoring.add > thisitem) { if (wewant(thisitem)) { int length; next = thisitem; do { next = nextitem(next); } while (wewant(next) && (nfrontp > next)); length = next-thisitem; memmove(good, thisitem, length); good += length; thisitem = next; } else { thisitem = nextitem(thisitem); } } #endif /* 0 */ } /* * These routines add various telnet commands to the data stream. */ static void doflush() { NET2ADD(IAC, DO); NETADD(TELOPT_TM); flushline = 1; flushout = 1; (void) ttyflush(1); /* Flush/drop output */ /* do printoption AFTER flush, otherwise the output gets tossed... */ printoption("SENT", DO, TELOPT_TM); } void xmitAO() { NET2ADD(IAC, AO); printoption("SENT", IAC, AO); if (autoflush) { doflush(); } } void xmitEL() { NET2ADD(IAC, EL); printoption("SENT", IAC, EL); } void xmitEC() { NET2ADD(IAC, EC); printoption("SENT", IAC, EC); } int dosynch() { netclear(); /* clear the path to the network */ NETADD(IAC); setneturg(); NETADD(DM); printoption("SENT", IAC, DM); return 1; } int want_status_response = 0; int get_status() { unsigned char tmp[16]; register unsigned char *cp; if (my_want_state_is_dont(TELOPT_STATUS)) { printf("Remote side does not support STATUS option\n"); return 0; } cp = tmp; *cp++ = IAC; *cp++ = SB; *cp++ = TELOPT_STATUS; *cp++ = TELQUAL_SEND; *cp++ = IAC; *cp++ = SE; if (NETROOM() >= cp - tmp) { ring_supply_data(&netoring, tmp, cp-tmp); printsub('>', tmp+2, cp - tmp - 2); } ++want_status_response; return 1; } void intp() { NET2ADD(IAC, IP); printoption("SENT", IAC, IP); flushline = 1; if (autoflush) { doflush(); } if (autosynch) { dosynch(); } } void sendbrk() { NET2ADD(IAC, BREAK); printoption("SENT", IAC, BREAK); flushline = 1; if (autoflush) { doflush(); } if (autosynch) { dosynch(); } } void sendabort() { NET2ADD(IAC, ABORT); printoption("SENT", IAC, ABORT); flushline = 1; if (autoflush) { doflush(); } if (autosynch) { dosynch(); } } void sendsusp() { NET2ADD(IAC, SUSP); printoption("SENT", IAC, SUSP); flushline = 1; if (autoflush) { doflush(); } if (autosynch) { dosynch(); } } void sendeof() { NET2ADD(IAC, xEOF); printoption("SENT", IAC, xEOF); } void sendayt() { NET2ADD(IAC, AYT); printoption("SENT", IAC, AYT); } /* * Send a window size update to the remote system. */ void sendnaws() { long rows, cols; unsigned char tmp[16]; register unsigned char *cp; if (my_state_is_wont(TELOPT_NAWS)) return; #define PUTSHORT(cp, x) { if ((*cp++ = ((x)>>8)&0xff) == IAC) *cp++ = IAC; \ if ((*cp++ = ((x))&0xff) == IAC) *cp++ = IAC; } if (TerminalWindowSize(&rows, &cols) == 0) { /* Failed */ return; } cp = tmp; *cp++ = IAC; *cp++ = SB; *cp++ = TELOPT_NAWS; PUTSHORT(cp, cols); PUTSHORT(cp, rows); *cp++ = IAC; *cp++ = SE; if (NETROOM() >= cp - tmp) { ring_supply_data(&netoring, tmp, cp-tmp); printsub('>', tmp+2, cp - tmp - 2); } } void tel_enter_binary(rw) int rw; { if (rw&1) send_do(TELOPT_BINARY, 1); if (rw&2) send_will(TELOPT_BINARY, 1); } void tel_leave_binary(rw) int rw; { if (rw&1) send_dont(TELOPT_BINARY, 1); if (rw&2) send_wont(TELOPT_BINARY, 1); }