/* $OpenBSD: cl_screen.c,v 1.13 2002/02/16 21:27:56 millert Exp $ */ /*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cl_screen.c 10.49 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "cl.h" static int cl_ex_end(GS *); static int cl_ex_init(SCR *); static void cl_freecap(CL_PRIVATE *); static int cl_vi_end(GS *); static int cl_vi_init(SCR *); static int cl_putenv(char *, char *, u_long); /* * cl_screen -- * Switch screen types. * * PUBLIC: int cl_screen(SCR *, u_int32_t); */ int cl_screen(sp, flags) SCR *sp; u_int32_t flags; { CL_PRIVATE *clp; GS *gp; gp = sp->gp; clp = CLP(sp); /* See if the current information is incorrect. */ if (F_ISSET(gp, G_SRESTART)) { if (cl_quit(gp)) return (1); F_CLR(gp, G_SRESTART); } /* See if we're already in the right mode. */ if (LF_ISSET(SC_EX) && F_ISSET(sp, SC_SCR_EX) || LF_ISSET(SC_VI) && F_ISSET(sp, SC_SCR_VI)) return (0); /* * Fake leaving ex mode. * * We don't actually exit ex or vi mode unless forced (e.g. by a window * size change). This is because many curses implementations can't be * called twice in a single program. Plus, it's faster. If the editor * "leaves" vi to enter ex, when it exits ex we'll just fall back into * vi. */ if (F_ISSET(sp, SC_SCR_EX)) F_CLR(sp, SC_SCR_EX); /* * Fake leaving vi mode. * * Clear out the rest of the screen if we're in the middle of a split * screen. Move to the last line in the current screen -- this makes * terminal scrolling happen naturally. Note: *don't* move past the * end of the screen, as there are ex commands (e.g., :read ! cat file) * that don't want to. Don't clear the info line, its contents may be * valid, e.g. :file|append. */ if (F_ISSET(sp, SC_SCR_VI)) { F_CLR(sp, SC_SCR_VI); if (sp->q.cqe_next != (void *)&gp->dq) { (void)move(RLNO(sp, sp->rows), 0); clrtobot(); } (void)move(RLNO(sp, sp->rows) - 1, 0); refresh(); } /* Enter the requested mode. */ if (LF_ISSET(SC_EX)) { if (cl_ex_init(sp)) return (1); F_SET(clp, CL_IN_EX | CL_SCR_EX_INIT); /* * If doing an ex screen for ex mode, move to the last line * on the screen. */ if (F_ISSET(sp, SC_EX) && clp->cup != NULL) tputs(tgoto(clp->cup, 0, O_VAL(sp, O_LINES) - 1), 1, cl_putchar); } else { if (cl_vi_init(sp)) return (1); F_CLR(clp, CL_IN_EX); F_SET(clp, CL_SCR_VI_INIT); } return (0); } /* * cl_quit -- * Shutdown the screens. * * PUBLIC: int cl_quit(GS *); */ int cl_quit(gp) GS *gp; { CL_PRIVATE *clp; int rval; rval = 0; clp = GCLP(gp); /* * If we weren't really running, ignore it. This happens if the * screen changes size before we've called curses. */ if (!F_ISSET(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT)) return (0); /* Clean up the terminal mappings. */ if (cl_term_end(gp)) rval = 1; /* Really leave vi mode. */ if (F_ISSET(clp, CL_STDIN_TTY) && F_ISSET(clp, CL_SCR_VI_INIT) && cl_vi_end(gp)) rval = 1; /* Really leave ex mode. */ if (F_ISSET(clp, CL_STDIN_TTY) && F_ISSET(clp, CL_SCR_EX_INIT) && cl_ex_end(gp)) rval = 1; /* * If we were running ex when we quit, or we're using an implementation * of curses where endwin() doesn't get this right, restore the original * terminal modes. * * XXX * We always do this because it's too hard to figure out what curses * implementations get it wrong. It may discard type-ahead characters * from the tty queue. */ (void)tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->orig); F_CLR(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT); return (rval); } /* * cl_vi_init -- * Initialize the curses vi screen. */ static int cl_vi_init(sp) SCR *sp; { CL_PRIVATE *clp; GS *gp; char *o_cols, *o_lines, *o_term, *ttype; gp = sp->gp; clp = CLP(sp); /* If already initialized, just set the terminal modes. */ if (F_ISSET(clp, CL_SCR_VI_INIT)) goto fast; /* Curses vi always reads from (and writes to) a terminal. */ if (!F_ISSET(clp, CL_STDIN_TTY) || !isatty(STDOUT_FILENO)) { msgq(sp, M_ERR, "016|Vi's standard input and output must be a terminal"); return (1); } /* We'll need a terminal type. */ if (opts_empty(sp, O_TERM, 0)) return (1); ttype = O_STR(sp, O_TERM); /* * XXX * Changing the row/column and terminal values is done by putting them * into the environment, which is then read by curses. What this loses * in ugliness, it makes up for in stupidity. We can't simply put the * values into the environment ourselves, because in the presence of a * kernel mechanism for returning the window size, entering values into * the environment will screw up future screen resizing events, e.g. if * the user enters a :shell command and then resizes their window. So, * if they weren't already in the environment, we make sure to delete * them immediately after setting them. * * XXX * Putting the TERM variable into the environment is necessary, even * though we're using newterm() here. We may be using initscr() as * the underlying function. */ o_term = getenv("TERM"); cl_putenv("TERM", ttype, 0); o_lines = getenv("LINES"); cl_putenv("LINES", NULL, (u_long)O_VAL(sp, O_LINES)); o_cols = getenv("COLUMNS"); cl_putenv("COLUMNS", NULL, (u_long)O_VAL(sp, O_COLUMNS)); /* * We don't care about the SCREEN reference returned by newterm, we * never have more than one SCREEN at a time. * * XXX * The SunOS initscr() can't be called twice. Don't even think about * using it. It fails in subtle ways (e.g. select(2) on fileno(stdin) * stops working). (The SVID notes that applications should only call * initscr() once.) * * XXX * The HP/UX newterm doesn't support the NULL first argument, so we * have to specify the terminal type. */ errno = 0; if (newterm(ttype, stdout, stdin) == NULL) { if (errno) msgq(sp, M_SYSERR, "%s", ttype); else msgq(sp, M_ERR, "%s: unknown terminal type", ttype); return (1); } if (o_term == NULL) unsetenv("TERM"); if (o_lines == NULL) unsetenv("LINES"); if (o_cols == NULL) unsetenv("COLUMNS"); /* * XXX * Someone got let out alone without adult supervision -- the SunOS * newterm resets the signal handlers. There's a race, but it's not * worth closing. */ (void)sig_init(sp->gp, sp); /* * We use raw mode. What we want is 8-bit clean, however, signals * and flow control should continue to work. Admittedly, it sounds * like cbreak, but it isn't. Using cbreak() can get you additional * things like IEXTEN, which turns on flags like DISCARD and LNEXT. * * !!! * If raw isn't turning off echo and newlines, something's wrong. * However, it shouldn't hurt. */ noecho(); /* No character echo. */ nonl(); /* No CR/NL translation. */ raw(); /* 8-bit clean. */ idlok(stdscr, 1); /* Use hardware insert/delete line. */ /* Put the cursor keys into application mode. */ (void)keypad(stdscr, TRUE); /* * XXX * The screen TI sequence just got sent. See the comment in * cl_funcs.c:cl_attr(). */ clp->ti_te = TI_SENT; /* * XXX * Historic implementations of curses handled SIGTSTP signals * in one of three ways. They either: * * 1: Set their own handler, regardless. * 2: Did not set a handler if a handler was already installed. * 3: Set their own handler, but then called any previously set * handler after completing their own cleanup. * * We don't try and figure out which behavior is in place, we force * it to SIG_DFL after initializing the curses interface, which means * that curses isn't going to take the signal. Since curses isn't * reentrant (i.e., the whole curses SIGTSTP interface is a fantasy), * we're doing The Right Thing. */ (void)signal(SIGTSTP, SIG_DFL); /* * If flow control was on, turn it back on. Turn signals on. ISIG * turns on VINTR, VQUIT, VDSUSP and VSUSP. The main curses code * already installed a handler for VINTR. We're going to disable the * other three. * * XXX * We want to use ^Y as a vi scrolling command. If the user has the * DSUSP character set to ^Y (common practice) clean it up. As it's * equally possible that the user has VDSUSP set to 'a', we disable * it regardless. It doesn't make much sense to suspend vi at read, * so I don't think anyone will care. Alternatively, we could look * it up in the table of legal command characters and turn it off if * it matches one. VDSUSP wasn't in POSIX 1003.1-1990, so we test for * it. * * XXX * We don't check to see if the user had signals enabled originally. * If they didn't, it's unclear what we're supposed to do here, but * it's also pretty unlikely. */ if (tcgetattr(STDIN_FILENO, &clp->vi_enter)) { msgq(sp, M_SYSERR, "tcgetattr"); goto err; } if (clp->orig.c_iflag & IXON) clp->vi_enter.c_iflag |= IXON; if (clp->orig.c_iflag & IXOFF) clp->vi_enter.c_iflag |= IXOFF; clp->vi_enter.c_lflag |= ISIG; #ifdef VDSUSP clp->vi_enter.c_cc[VDSUSP] = _POSIX_VDISABLE; #endif clp->vi_enter.c_cc[VQUIT] = _POSIX_VDISABLE; clp->vi_enter.c_cc[VSUSP] = _POSIX_VDISABLE; /* * XXX * OSF/1 doesn't turn off the , or * characters when curses switches into raw mode. It should be OK * to do it explicitly for everyone. */ #ifdef VDISCARD clp->vi_enter.c_cc[VDISCARD] = _POSIX_VDISABLE; #endif #ifdef VLNEXT clp->vi_enter.c_cc[VLNEXT] = _POSIX_VDISABLE; #endif #ifdef VSTATUS clp->vi_enter.c_cc[VSTATUS] = _POSIX_VDISABLE; #endif /* Initialize terminal based information. */ if (cl_term_init(sp)) goto err; fast: /* Set the terminal modes. */ if (tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &clp->vi_enter)) { msgq(sp, M_SYSERR, "tcsetattr"); err: (void)cl_vi_end(sp->gp); return (1); } return (0); } /* * cl_vi_end -- * Shutdown the vi screen. */ static int cl_vi_end(gp) GS *gp; { CL_PRIVATE *clp; clp = GCLP(gp); /* Restore the cursor keys to normal mode. */ (void)keypad(stdscr, FALSE); /* * If we were running vi when we quit, scroll the screen up a single * line so we don't lose any information. * * Move to the bottom of the window (some endwin implementations don't * do this for you). */ if (!F_ISSET(clp, CL_IN_EX)) { (void)move(0, 0); (void)deleteln(); (void)move(LINES - 1, 0); (void)refresh(); } cl_freecap(clp); /* End curses window. */ (void)endwin(); /* * XXX * The screen TE sequence just got sent. See the comment in * cl_funcs.c:cl_attr(). */ clp->ti_te = TE_SENT; return (0); } /* * cl_ex_init -- * Initialize the ex screen. */ static int cl_ex_init(sp) SCR *sp; { CL_PRIVATE *clp; clp = CLP(sp); /* If already initialized, just set the terminal modes. */ if (F_ISSET(clp, CL_SCR_EX_INIT)) goto fast; /* If not reading from a file, we're done. */ if (!F_ISSET(clp, CL_STDIN_TTY)) return (0); /* Get the ex termcap/terminfo strings. */ (void)cl_getcap(sp, "cup", &clp->cup); (void)cl_getcap(sp, "smso", &clp->smso); (void)cl_getcap(sp, "rmso", &clp->rmso); (void)cl_getcap(sp, "el", &clp->el); (void)cl_getcap(sp, "cuu1", &clp->cuu1); /* Enter_standout_mode and exit_standout_mode are paired. */ if (clp->smso == NULL || clp->rmso == NULL) { if (clp->smso != NULL) { free(clp->smso); clp->smso = NULL; } if (clp->rmso != NULL) { free(clp->rmso); clp->rmso = NULL; } } /* * Turn on canonical mode, with normal input and output processing. * Start with the original terminal settings as the user probably * had them (including any local extensions) set correctly for the * current terminal. * * !!! * We can't get everything that we need portably; for example, ONLCR, * mapping to on output isn't required * by POSIX 1003.1b-1993. If this turns out to be a problem, then * we'll either have to play some games on the mapping, or we'll have * to make all ex printf's output \r\n instead of \n. */ clp->ex_enter = clp->orig; clp->ex_enter.c_lflag |= ECHO | ECHOE | ECHOK | ICANON | IEXTEN | ISIG; #ifdef ECHOCTL clp->ex_enter.c_lflag |= ECHOCTL; #endif #ifdef ECHOKE clp->ex_enter.c_lflag |= ECHOKE; #endif clp->ex_enter.c_iflag |= ICRNL; clp->ex_enter.c_oflag |= OPOST; #ifdef ONLCR clp->ex_enter.c_oflag |= ONLCR; #endif fast: if (tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->ex_enter)) { msgq(sp, M_SYSERR, "tcsetattr"); return (1); } return (0); } /* * cl_ex_end -- * Shutdown the ex screen. */ static int cl_ex_end(gp) GS *gp; { CL_PRIVATE *clp; clp = GCLP(gp); cl_freecap(clp); return (0); } /* * cl_getcap -- * Retrieve termcap/terminfo strings. * * PUBLIC: int cl_getcap(SCR *, char *, char **); */ int cl_getcap(sp, name, elementp) SCR *sp; char *name, **elementp; { size_t len; char *t; if ((t = tigetstr(name)) != NULL && t != (char *)-1 && (len = strlen(t)) != 0) { MALLOC_RET(sp, *elementp, char *, len + 1); memmove(*elementp, t, len + 1); } return (0); } /* * cl_freecap -- * Free any allocated termcap/terminfo strings. */ static void cl_freecap(clp) CL_PRIVATE *clp; { if (clp->el != NULL) { free(clp->el); clp->el = NULL; } if (clp->cup != NULL) { free(clp->cup); clp->cup = NULL; } if (clp->cuu1 != NULL) { free(clp->cuu1); clp->cuu1 = NULL; } if (clp->rmso != NULL) { free(clp->rmso); clp->rmso = NULL; } if (clp->smso != NULL) { free(clp->smso); clp->smso = NULL; } } /* * cl_putenv -- * Put a value into the environment. */ static int cl_putenv(name, str, value) char *name, *str; u_long value; { char buf[40]; if (str == NULL) { (void)snprintf(buf, sizeof(buf), "%lu", value); return (setenv(name, buf, 1)); } else return (setenv(name, str, 1)); }