/* $OpenBSD: key.c,v 1.11 2013/11/28 22:12:40 krw Exp $ */ /*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "../vi/vi.h" static int v_event_append(SCR *, EVENT *); static int v_event_grow(SCR *, int); static int v_key_cmp(const void *, const void *); static void v_keyval(SCR *, int, scr_keyval_t); static void v_sync(SCR *, int); /* * !!! * Historic vi always used: * * ^D: autoindent deletion * ^H: last character deletion * ^W: last word deletion * ^Q: quote the next character (if not used in flow control). * ^V: quote the next character * * regardless of the user's choices for these characters. The user's erase * and kill characters worked in addition to these characters. Nvi wires * down the above characters, but in addition permits the VEOF, VERASE, VKILL * and VWERASE characters described by the user's termios structure. * * Ex was not consistent with this scheme, as it historically ran in tty * cooked mode. This meant that the scroll command and autoindent erase * characters were mapped to the user's EOF character, and the character * and word deletion characters were the user's tty character and word * deletion characters. This implementation makes it all consistent, as * described above for vi. * * !!! * This means that all screens share a special key set. */ KEYLIST keylist[] = { {K_BACKSLASH, '\\'}, /* \ */ {K_CARAT, '^'}, /* ^ */ {K_CNTRLD, '\004'}, /* ^D */ {K_CNTRLR, '\022'}, /* ^R */ {K_CNTRLT, '\024'}, /* ^T */ {K_CNTRLZ, '\032'}, /* ^Z */ {K_COLON, ':'}, /* : */ {K_CR, '\r'}, /* \r */ {K_ESCAPE, '\033'}, /* ^[ */ {K_FORMFEED, '\f'}, /* \f */ {K_HEXCHAR, '\030'}, /* ^X */ {K_NL, '\n'}, /* \n */ {K_RIGHTBRACE, '}'}, /* } */ {K_RIGHTPAREN, ')'}, /* ) */ {K_TAB, '\t'}, /* \t */ {K_VERASE, '\b'}, /* \b */ {K_VKILL, '\025'}, /* ^U */ {K_VLNEXT, '\021'}, /* ^Q */ {K_VLNEXT, '\026'}, /* ^V */ {K_VWERASE, '\027'}, /* ^W */ {K_ZERO, '0'}, /* 0 */ #define ADDITIONAL_CHARACTERS 4 {K_NOTUSED, 0}, /* VEOF, VERASE, VKILL, VWERASE */ {K_NOTUSED, 0}, {K_NOTUSED, 0}, {K_NOTUSED, 0}, }; static int nkeylist = (sizeof(keylist) / sizeof(keylist[0])) - ADDITIONAL_CHARACTERS; /* * v_key_init -- * Initialize the special key lookup table. * * PUBLIC: int v_key_init(SCR *); */ int v_key_init(sp) SCR *sp; { u_int ch; GS *gp; KEYLIST *kp; int cnt; gp = sp->gp; /* * XXX * 8-bit only, for now. Recompilation should get you any 8-bit * character set, as long as nul isn't a character. */ (void)setlocale(LC_ALL, ""); #if __linux__ /* * In libc 4.5.26, setlocale(LC_ALL, ""), doesn't setup the table * for ctype(3c) correctly. This bug is fixed in libc 4.6.x. * * This code works around this problem for libc 4.5.x users. * Note that this code is harmless if you're using libc 4.6.x. */ (void)setlocale(LC_CTYPE, ""); #endif v_key_ilookup(sp); v_keyval(sp, K_CNTRLD, KEY_VEOF); v_keyval(sp, K_VERASE, KEY_VERASE); v_keyval(sp, K_VKILL, KEY_VKILL); v_keyval(sp, K_VWERASE, KEY_VWERASE); /* Sort the special key list. */ qsort(keylist, nkeylist, sizeof(keylist[0]), v_key_cmp); /* Initialize the fast lookup table. */ for (gp->max_special = 0, kp = keylist, cnt = nkeylist; cnt--; ++kp) { if (gp->max_special < kp->value) gp->max_special = kp->value; if (kp->ch <= MAX_FAST_KEY) gp->special_key[kp->ch] = kp->value; } /* Find a non-printable character to use as a message separator. */ for (ch = 1; ch <= MAX_CHAR_T; ++ch) if (!isprint(ch)) { gp->noprint = ch; break; } if (ch != gp->noprint) { msgq(sp, M_ERR, "079|No non-printable character found"); return (1); } return (0); } /* * v_keyval -- * Set key values. * * We've left some open slots in the keylist table, and if these values exist, * we put them into place. Note, they may reset (or duplicate) values already * in the table, so we check for that first. */ static void v_keyval(sp, val, name) SCR *sp; int val; scr_keyval_t name; { KEYLIST *kp; CHAR_T ch; int dne; /* Get the key's value from the screen. */ if (sp->gp->scr_keyval(sp, name, &ch, &dne)) return; if (dne) return; /* Check for duplication. */ for (kp = keylist; kp->value != K_NOTUSED; ++kp) if (kp->ch == ch) { kp->value = val; return; } /* Add a new entry. */ if (kp->value == K_NOTUSED) { keylist[nkeylist].ch = ch; keylist[nkeylist].value = val; ++nkeylist; } } /* * v_key_ilookup -- * Build the fast-lookup key display array. * * PUBLIC: void v_key_ilookup(SCR *); */ void v_key_ilookup(sp) SCR *sp; { CHAR_T ch, *p, *t; GS *gp; size_t len; for (gp = sp->gp, ch = 0; ch <= MAX_FAST_KEY; ++ch) for (p = gp->cname[ch].name, t = v_key_name(sp, ch), len = gp->cname[ch].len = sp->clen; len--;) *p++ = *t++; } /* * v_key_len -- * Return the length of the string that will display the key. * This routine is the backup for the KEY_LEN() macro. * * PUBLIC: size_t v_key_len(SCR *, ARG_CHAR_T); */ size_t v_key_len(sp, ch) SCR *sp; ARG_CHAR_T ch; { (void)v_key_name(sp, ch); return (sp->clen); } /* * v_key_name -- * Return the string that will display the key. This routine * is the backup for the KEY_NAME() macro. * * PUBLIC: CHAR_T *v_key_name(SCR *, ARG_CHAR_T); */ CHAR_T * v_key_name(sp, ach) SCR *sp; ARG_CHAR_T ach; { static const CHAR_T hexdigit[] = "0123456789abcdef"; static const CHAR_T octdigit[] = "01234567"; CHAR_T ch, *chp, mask; size_t len; int cnt, shift; ch = ach; /* See if the character was explicitly declared printable or not. */ if ((chp = O_STR(sp, O_PRINT)) != NULL) for (; *chp != '\0'; ++chp) if (*chp == ch) goto pr; if ((chp = O_STR(sp, O_NOPRINT)) != NULL) for (; *chp != '\0'; ++chp) if (*chp == ch) goto nopr; /* * Historical (ARPA standard) mappings. Printable characters are left * alone. Control characters less than 0x20 are represented as '^' * followed by the character offset from the '@' character in the ASCII * character set. Del (0x7f) is represented as '^' followed by '?'. * * XXX * The following code depends on the current locale being identical to * the ASCII map from 0x40 to 0x5f (since 0x1f + 0x40 == 0x5f). I'm * told that this is a reasonable assumption... * * XXX * This code will only work with CHAR_T's that are multiples of 8-bit * bytes. * * XXX * NB: There's an assumption here that all printable characters take * up a single column on the screen. This is not always correct. */ if (isprint(ch)) { pr: sp->cname[0] = ch; len = 1; goto done; } nopr: if (iscntrl(ch) && (ch < 0x20 || ch == 0x7f)) { sp->cname[0] = '^'; sp->cname[1] = ch == 0x7f ? '?' : '@' + ch; len = 2; } else if (O_ISSET(sp, O_OCTAL)) { #define BITS (sizeof(CHAR_T) * 8) #define SHIFT (BITS - BITS % 3) #define TOPMASK (BITS % 3 == 2 ? 3 : 1) << (BITS - BITS % 3) sp->cname[0] = '\\'; sp->cname[1] = octdigit[(ch & TOPMASK) >> SHIFT]; shift = SHIFT - 3; for (len = 2, mask = 7 << (SHIFT - 3), cnt = BITS / 3; cnt-- > 0; mask >>= 3, shift -= 3) sp->cname[len++] = octdigit[(ch & mask) >> shift]; } else { sp->cname[0] = '\\'; sp->cname[1] = 'x'; for (len = 2, chp = (u_int8_t *)&ch, cnt = sizeof(CHAR_T); cnt-- > 0; ++chp) { sp->cname[len++] = hexdigit[(*chp & 0xf0) >> 4]; sp->cname[len++] = hexdigit[*chp & 0x0f]; } } done: sp->cname[sp->clen = len] = '\0'; return (sp->cname); } /* * v_key_val -- * Fill in the value for a key. This routine is the backup * for the KEY_VAL() macro. * * PUBLIC: int v_key_val(SCR *, ARG_CHAR_T); */ int v_key_val(sp, ch) SCR *sp; ARG_CHAR_T ch; { KEYLIST k, *kp; k.ch = ch; kp = bsearch(&k, keylist, nkeylist, sizeof(keylist[0]), v_key_cmp); return (kp == NULL ? K_NOTUSED : kp->value); } /* * v_event_push -- * Push events/keys onto the front of the buffer. * * There is a single input buffer in ex/vi. Characters are put onto the * end of the buffer by the terminal input routines, and pushed onto the * front of the buffer by various other functions in ex/vi. Each key has * an associated flag value, which indicates if it has already been quoted, * and if it is the result of a mapping or an abbreviation. * * PUBLIC: int v_event_push(SCR *, EVENT *, CHAR_T *, size_t, u_int); */ int v_event_push(sp, p_evp, p_s, nitems, flags) SCR *sp; EVENT *p_evp; /* Push event. */ CHAR_T *p_s; /* Push characters. */ size_t nitems; /* Number of items to push. */ u_int flags; /* CH_* flags. */ { EVENT *evp; GS *gp; size_t total; /* If we have room, stuff the items into the buffer. */ gp = sp->gp; if (nitems <= gp->i_next || (gp->i_event != NULL && gp->i_cnt == 0 && nitems <= gp->i_nelem)) { if (gp->i_cnt != 0) gp->i_next -= nitems; goto copy; } /* * If there are currently items in the queue, shift them up, * leaving some extra room. Get enough space plus a little * extra. */ #define TERM_PUSH_SHIFT 30 total = gp->i_cnt + gp->i_next + nitems + TERM_PUSH_SHIFT; if (total >= gp->i_nelem && v_event_grow(sp, MAX(total, 64))) return (1); if (gp->i_cnt) MEMMOVE(gp->i_event + TERM_PUSH_SHIFT + nitems, gp->i_event + gp->i_next, gp->i_cnt); gp->i_next = TERM_PUSH_SHIFT; /* Put the new items into the queue. */ copy: gp->i_cnt += nitems; for (evp = gp->i_event + gp->i_next; nitems--; ++evp) { if (p_evp != NULL) *evp = *p_evp++; else { evp->e_event = E_CHARACTER; evp->e_c = *p_s++; evp->e_value = KEY_VAL(sp, evp->e_c); F_INIT(&evp->e_ch, flags); } } return (0); } /* * v_event_append -- * Append events onto the tail of the buffer. */ static int v_event_append(sp, argp) SCR *sp; EVENT *argp; { CHAR_T *s; /* Characters. */ EVENT *evp; GS *gp; size_t nevents; /* Number of events. */ /* Grow the buffer as necessary. */ nevents = argp->e_event == E_STRING ? argp->e_len : 1; gp = sp->gp; if (gp->i_event == NULL || nevents > gp->i_nelem - (gp->i_next + gp->i_cnt)) v_event_grow(sp, MAX(nevents, 64)); evp = gp->i_event + gp->i_next + gp->i_cnt; gp->i_cnt += nevents; /* Transform strings of characters into single events. */ if (argp->e_event == E_STRING) for (s = argp->e_csp; nevents--; ++evp) { evp->e_event = E_CHARACTER; evp->e_c = *s++; evp->e_value = KEY_VAL(sp, evp->e_c); evp->e_flags = 0; } else *evp = *argp; return (0); } /* Remove events from the queue. */ #define QREM(len) { \ if ((gp->i_cnt -= (len)) == 0) \ gp->i_next = 0; \ else \ gp->i_next += (len); \ } /* * v_event_get -- * Return the next event. * * !!! * The flag EC_NODIGIT probably needs some explanation. First, the idea of * mapping keys is that one or more keystrokes act like a function key. * What's going on is that vi is reading a number, and the character following * the number may or may not be mapped (EC_MAPCOMMAND). For example, if the * user is entering the z command, a valid command is "z40+", and we don't want * to map the '+', i.e. if '+' is mapped to "xxx", we don't want to change it * into "z40xxx". However, if the user enters "35x", we want to put all of the * characters through the mapping code. * * Historical practice is a bit muddled here. (Surprise!) It always permitted * mapping digits as long as they weren't the first character of the map, e.g. * ":map ^A1 xxx" was okay. It also permitted the mapping of the digits 1-9 * (the digit 0 was a special case as it doesn't indicate the start of a count) * as the first character of the map, but then ignored those mappings. While * it's probably stupid to map digits, vi isn't your mother. * * The way this works is that the EC_MAPNODIGIT causes term_key to return the * end-of-digit without "looking" at the next character, i.e. leaving it as the * user entered it. Presumably, the next term_key call will tell us how the * user wants it handled. * * There is one more complication. Users might map keys to digits, and, as * it's described above, the commands: * * :map g 1G * d2g * * would return the keys "d21G", when the user probably wanted * "d21G". So, if a map starts off with a digit we continue as * before, otherwise, we pretend we haven't mapped the character, and return * . * * Now that that's out of the way, let's talk about Energizer Bunny macros. * It's easy to create macros that expand to a loop, e.g. map x 3x. It's * fairly easy to detect this example, because it's all internal to term_key. * If we're expanding a macro and it gets big enough, at some point we can * assume it's looping and kill it. The examples that are tough are the ones * where the parser is involved, e.g. map x "ayyx"byy. We do an expansion * on 'x', and get "ayyx"byy. We then return the first 4 characters, and then * find the looping macro again. There is no way that we can detect this * without doing a full parse of the command, because the character that might * cause the loop (in this case 'x') may be a literal character, e.g. the map * map x "ayy"xyy"byy is perfectly legal and won't cause a loop. * * Historic vi tried to detect looping macros by disallowing obvious cases in * the map command, maps that that ended with the same letter as they started * (which wrongly disallowed "map x 'x"), and detecting macros that expanded * too many times before keys were returned to the command parser. It didn't * get many (most?) of the tricky cases right, however, and it was certainly * possible to create macros that ran forever. And, even if it did figure out * what was going on, the user was usually tossed into ex mode. Finally, any * changes made before vi realized that the macro was recursing were left in * place. We recover gracefully, but the only recourse the user has in an * infinite macro loop is to interrupt. * * !!! * It is historic practice that mapping characters to themselves as the first * part of the mapped string was legal, and did not cause infinite loops, i.e. * ":map! { {^M^T" and ":map n nz." were known to work. The initial, matching * characters were returned instead of being remapped. * * !!! * It is also historic practice that the macro "map ] ]]^" caused a single ] * keypress to behave as the command ]] (the ^ got the map past the vi check * for "tail recursion"). Conversely, the mapping "map n nn^" went recursive. * What happened was that, in the historic vi, maps were expanded as the keys * were retrieved, but not all at once and not centrally. So, the keypress ] * pushed ]]^ on the stack, and then the first ] from the stack was passed to * the ]] command code. The ]] command then retrieved a key without entering * the mapping code. This could bite us anytime a user has a map that depends * on secondary keys NOT being mapped. I can't see any possible way to make * this work in here without the complete abandonment of Rationality Itself. * * XXX * The final issue is recovery. It would be possible to undo all of the work * that was done by the macro if we entered a record into the log so that we * knew when the macro started, and, in fact, this might be worth doing at some * point. Given that this might make the log grow unacceptably (consider that * cursor keys are done with maps), for now we leave any changes made in place. * * PUBLIC: int v_event_get(SCR *, EVENT *, int, u_int32_t); */ int v_event_get(sp, argp, timeout, flags) SCR *sp; EVENT *argp; int timeout; u_int32_t flags; { EVENT *evp, ev; GS *gp; SEQ *qp; int init_nomap, ispartial, istimeout, remap_cnt; gp = sp->gp; /* If simply checking for interrupts, argp may be NULL. */ if (argp == NULL) argp = &ev; retry: istimeout = remap_cnt = 0; /* * If the queue isn't empty and we're timing out for characters, * return immediately. */ if (gp->i_cnt != 0 && LF_ISSET(EC_TIMEOUT)) return (0); /* * If the queue is empty, we're checking for interrupts, or we're * timing out for characters, get more events. */ if (gp->i_cnt == 0 || LF_ISSET(EC_INTERRUPT | EC_TIMEOUT)) { /* * If we're reading new characters, check any scripting * windows for input. */ if (F_ISSET(gp, G_SCRWIN) && sscr_input(sp)) return (1); loop: if (gp->scr_event(sp, argp, LF_ISSET(EC_INTERRUPT | EC_QUOTED | EC_RAW), timeout)) return (1); switch (argp->e_event) { case E_ERR: case E_SIGHUP: case E_SIGTERM: /* * Fatal conditions cause the file to be synced to * disk immediately. */ v_sync(sp, RCV_ENDSESSION | RCV_PRESERVE | (argp->e_event == E_SIGTERM ? 0: RCV_EMAIL)); return (1); case E_TIMEOUT: istimeout = 1; break; case E_INTERRUPT: /* Set the global interrupt flag. */ F_SET(sp->gp, G_INTERRUPTED); /* * If the caller was interested in interrupts, return * immediately. */ if (LF_ISSET(EC_INTERRUPT)) return (0); goto append; default: append: if (v_event_append(sp, argp)) return (1); break; } } /* * If the caller was only interested in interrupts or timeouts, return * immediately. (We may have gotten characters, and that's okay, they * were queued up for later use.) */ if (LF_ISSET(EC_INTERRUPT | EC_TIMEOUT)) return (0); newmap: evp = &gp->i_event[gp->i_next]; /* * If the next event in the queue isn't a character event, return * it, we're done. */ if (evp->e_event != E_CHARACTER) { *argp = *evp; QREM(1); return (0); } /* * If the key isn't mappable because: * * + ... the timeout has expired * + ... it's not a mappable key * + ... neither the command or input map flags are set * + ... there are no maps that can apply to it * * return it forthwith. */ if (istimeout || F_ISSET(&evp->e_ch, CH_NOMAP) || !LF_ISSET(EC_MAPCOMMAND | EC_MAPINPUT) || (evp->e_c < MAX_BIT_SEQ && !bit_test(gp->seqb, evp->e_c))) goto nomap; /* Search the map. */ qp = seq_find(sp, NULL, evp, NULL, gp->i_cnt, LF_ISSET(EC_MAPCOMMAND) ? SEQ_COMMAND : SEQ_INPUT, &ispartial); /* * If get a partial match, get more characters and retry the map. * If time out without further characters, return the characters * unmapped. * * !!! * characters are a problem. Cursor keys start with * characters, so there's almost always a map in place that begins with * an character. If we timeout keys in the same way * that we timeout other keys, the user will get a noticeable pause as * they enter to terminate input mode. If key timeout is set * for a slow link, users will get an even longer pause. Nvi used to * simply timeout characters at 1/10th of a second, but this * loses over PPP links where the latency is greater than 100Ms. */ if (ispartial) { if (O_ISSET(sp, O_TIMEOUT)) timeout = (evp->e_value == K_ESCAPE ? O_VAL(sp, O_ESCAPETIME) : O_VAL(sp, O_KEYTIME)) * 100; else timeout = 0; goto loop; } /* If no map, return the character. */ if (qp == NULL) { nomap: if (!isdigit(evp->e_c) && LF_ISSET(EC_MAPNODIGIT)) goto not_digit; *argp = *evp; QREM(1); return (0); } /* * If looking for the end of a digit string, and the first character * of the map is it, pretend we haven't seen the character. */ if (LF_ISSET(EC_MAPNODIGIT) && qp->output != NULL && !isdigit(qp->output[0])) { not_digit: argp->e_c = CH_NOT_DIGIT; argp->e_value = K_NOTUSED; argp->e_event = E_CHARACTER; F_INIT(&argp->e_ch, 0); return (0); } /* Find out if the initial segments are identical. */ init_nomap = !e_memcmp(qp->output, &gp->i_event[gp->i_next], qp->ilen); /* Delete the mapped characters from the queue. */ QREM(qp->ilen); /* If keys mapped to nothing, go get more. */ if (qp->output == NULL) goto retry; /* If remapping characters... */ if (O_ISSET(sp, O_REMAP)) { /* * Periodically check for interrupts. Always check the first * time through, because it's possible to set up a map that * will return a character every time, but will expand to more, * e.g. "map! a aaaa" will always return a 'a', but we'll never * get anywhere useful. */ if ((++remap_cnt == 1 || remap_cnt % 10 == 0) && (gp->scr_event(sp, &ev, EC_INTERRUPT, 0) || ev.e_event == E_INTERRUPT)) { F_SET(sp->gp, G_INTERRUPTED); argp->e_event = E_INTERRUPT; return (0); } /* * If an initial part of the characters mapped, they are not * further remapped -- return the first one. Push the rest * of the characters, or all of the characters if no initial * part mapped, back on the queue. */ if (init_nomap) { if (v_event_push(sp, NULL, qp->output + qp->ilen, qp->olen - qp->ilen, CH_MAPPED)) return (1); if (v_event_push(sp, NULL, qp->output, qp->ilen, CH_NOMAP | CH_MAPPED)) return (1); evp = &gp->i_event[gp->i_next]; goto nomap; } if (v_event_push(sp, NULL, qp->output, qp->olen, CH_MAPPED)) return (1); goto newmap; } /* Else, push the characters on the queue and return one. */ if (v_event_push(sp, NULL, qp->output, qp->olen, CH_MAPPED | CH_NOMAP)) return (1); goto nomap; } /* * v_sync -- * Walk the screen lists, sync'ing files to their backup copies. */ static void v_sync(sp, flags) SCR *sp; int flags; { GS *gp; gp = sp->gp; TAILQ_FOREACH(sp, &gp->dq, q) rcv_sync(sp, flags); TAILQ_FOREACH(sp, &gp->hq, q) rcv_sync(sp, flags); } /* * v_event_err -- * Unexpected event. * * PUBLIC: void v_event_err(SCR *, EVENT *); */ void v_event_err(sp, evp) SCR *sp; EVENT *evp; { switch (evp->e_event) { case E_CHARACTER: msgq(sp, M_ERR, "276|Unexpected character event"); break; case E_EOF: msgq(sp, M_ERR, "277|Unexpected end-of-file event"); break; case E_INTERRUPT: msgq(sp, M_ERR, "279|Unexpected interrupt event"); break; case E_QUIT: msgq(sp, M_ERR, "280|Unexpected quit event"); break; case E_REPAINT: msgq(sp, M_ERR, "281|Unexpected repaint event"); break; case E_STRING: msgq(sp, M_ERR, "285|Unexpected string event"); break; case E_TIMEOUT: msgq(sp, M_ERR, "286|Unexpected timeout event"); break; case E_WRESIZE: msgq(sp, M_ERR, "316|Unexpected resize event"); break; case E_WRITE: msgq(sp, M_ERR, "287|Unexpected write event"); break; /* * Theoretically, none of these can occur, as they're handled at the * top editor level. */ case E_ERR: case E_SIGHUP: case E_SIGTERM: default: abort(); } /* Free any allocated memory. */ if (evp->e_asp != NULL) free(evp->e_asp); } /* * v_event_flush -- * Flush any flagged keys, returning if any keys were flushed. * * PUBLIC: int v_event_flush(SCR *, u_int); */ int v_event_flush(sp, flags) SCR *sp; u_int flags; { GS *gp; int rval; for (rval = 0, gp = sp->gp; gp->i_cnt != 0 && F_ISSET(&gp->i_event[gp->i_next].e_ch, flags); rval = 1) QREM(1); return (rval); } /* * v_event_grow -- * Grow the terminal queue. */ static int v_event_grow(sp, add) SCR *sp; int add; { GS *gp; size_t new_nelem, olen; gp = sp->gp; new_nelem = gp->i_nelem + add; olen = gp->i_nelem * sizeof(gp->i_event[0]); BINC_RET(sp, gp->i_event, olen, new_nelem * sizeof(gp->i_event[0])); gp->i_nelem = olen / sizeof(gp->i_event[0]); return (0); } /* * v_key_cmp -- * Compare two keys for sorting. */ static int v_key_cmp(ap, bp) const void *ap, *bp; { return (((KEYLIST *)ap)->ch - ((KEYLIST *)bp)->ch); }