/* $OpenBSD: cmdcmds.c,v 1.3 1996/09/22 01:17:58 downsj Exp $ */ /* vi:set ts=4 sw=4: * * VIM - Vi IMproved by Bram Moolenaar * * Do ":help uganda" in Vim to read copying and usage conditions. * Do ":help credits" in Vim to see a list of people who contributed. */ /* * cmdcmds.c: functions for command line commands */ #include "vim.h" #include "globals.h" #include "proto.h" #include "option.h" static void do_filter __ARGS((linenr_t line1, linenr_t line2, char_u *buff, int do_in, int do_out)); #ifdef VIMINFO static char_u *viminfo_filename __ARGS((char_u *)); static void do_viminfo __ARGS((FILE *fp_in, FILE *fp_out, int want_info, int want_marks, int force_read)); static int read_viminfo_up_to_marks __ARGS((char_u *line, FILE *fp, int forceit)); #endif /* VIMINFO */ void do_ascii() { int c; char buf1[20]; char buf2[20]; char_u buf3[3]; c = gchar_cursor(); if (c == NUL) { MSG("empty line"); return; } if (c == NL) /* NUL is stored as NL */ c = NUL; if (isprintchar(c) && (c < ' ' || c > '~')) { transchar_nonprint(buf3, c); sprintf(buf1, " <%s>", (char *)buf3); } else buf1[0] = NUL; if (c >= 0x80) sprintf(buf2, " ", transchar(c & 0x7f)); else buf2[0] = NUL; sprintf((char *)IObuff, "<%s>%s%s %d, Hex %02x, Octal %03o", transchar(c), buf1, buf2, c, c, c); msg(IObuff); } /* * align text: * type = -1 left aligned * type = 0 centered * type = 1 right aligned */ void do_align(start, end, width, type) linenr_t start; linenr_t end; int width; int type; { FPOS pos; int len; int indent = 0; int new_indent = 0; /* init for GCC */ char_u *first; char_u *last; int save; #ifdef RIGHTLEFT if (curwin->w_p_rl) type = -type; /* switch left and right aligning */ #endif pos = curwin->w_cursor; if (type == -1) /* left align: width is used for new indent */ { if (width >= 0) indent = width; } else { /* * if 'textwidth' set, use it * else if 'wrapmargin' set, use it * if invalid value, use 80 */ if (width <= 0) width = curbuf->b_p_tw; if (width == 0 && curbuf->b_p_wm > 0) width = Columns - curbuf->b_p_wm; if (width <= 0) width = 80; } if (u_save((linenr_t)(start - 1), (linenr_t)(end + 1)) == FAIL) return; for (curwin->w_cursor.lnum = start; curwin->w_cursor.lnum <= end; ++curwin->w_cursor.lnum) { /* find the first non-blank character */ first = skipwhite(ml_get_curline()); /* find the character after the last non-blank character */ for (last = first + STRLEN(first); last > first && vim_iswhite(last[-1]); --last) ; save = *last; *last = NUL; len = linetabsize(first); /* get line length */ *last = save; if (len == 0) /* skip blank lines */ continue; switch (type) { case -1: new_indent = indent; /* left align */ break; case 0: new_indent = (width - len) / 2; /* center */ break; case 1: new_indent = width - len; /* right align */ break; } if (new_indent < 0) new_indent = 0; set_indent(new_indent, TRUE); /* set indent */ } curwin->w_cursor = pos; beginline(TRUE); updateScreen(NOT_VALID); } void do_retab(start, end, new_ts, forceit) linenr_t start; linenr_t end; int new_ts; int forceit; { linenr_t lnum; int got_tab = FALSE; long num_spaces = 0; long num_tabs; long len; long col; long vcol; long start_col = 0; /* For start of white-space string */ long start_vcol = 0; /* For start of white-space string */ int temp; long old_len; char_u *ptr; char_u *new_line = (char_u *)1; /* init to non-NULL */ int did_something = FALSE; int did_undo; /* called u_save for current line */ if (new_ts == 0) new_ts = curbuf->b_p_ts; for (lnum = start; !got_int && lnum <= end; ++lnum) { ptr = ml_get(lnum); col = 0; vcol = 0; did_undo = FALSE; for (;;) { if (vim_iswhite(ptr[col])) { if (!got_tab && num_spaces == 0) { /* First consecutive white-space */ start_vcol = vcol; start_col = col; } if (ptr[col] == ' ') num_spaces++; else got_tab = TRUE; } else { if (got_tab || (forceit && num_spaces > 1)) { /* Retabulate this string of white-space */ /* len is virtual length of white string */ len = num_spaces = vcol - start_vcol; num_tabs = 0; if (!curbuf->b_p_et) { temp = new_ts - (start_vcol % new_ts); if (num_spaces >= temp) { num_spaces -= temp; num_tabs++; } num_tabs += num_spaces / new_ts; num_spaces -= (num_spaces / new_ts) * new_ts; } if (curbuf->b_p_et || got_tab || (num_spaces + num_tabs < len)) { if (did_undo == FALSE) { did_undo = TRUE; if (u_save((linenr_t)(lnum - 1), (linenr_t)(lnum + 1)) == FAIL) { new_line = NULL; /* flag out-of-memory */ break; } } /* len is actual number of white characters used */ len = num_spaces + num_tabs; old_len = STRLEN(ptr); new_line = lalloc(old_len - col + start_col + len + 1, TRUE); if (new_line == NULL) break; if (start_col > 0) vim_memmove(new_line, ptr, (size_t)start_col); vim_memmove(new_line + start_col + len, ptr + col, (size_t)(old_len - col + 1)); ptr = new_line + start_col; for (col = 0; col < len; col++) ptr[col] = (col < num_tabs) ? '\t' : ' '; ml_replace(lnum, new_line, FALSE); did_something = TRUE; ptr = new_line; col = start_col + len; } } got_tab = FALSE; num_spaces = 0; } if (ptr[col] == NUL) break; vcol += chartabsize(ptr[col++], (colnr_t)vcol); } if (new_line == NULL) /* out of memory */ break; line_breakcheck(); } if (got_int) emsg(e_interr); if (did_something) CHANGED; curbuf->b_p_ts = new_ts; coladvance(curwin->w_curswant); } /* * :move command - move lines line1-line2 to line n * * return FAIL for failure, OK otherwise */ int do_move(line1, line2, n) linenr_t line1; linenr_t line2; linenr_t n; { char_u *str; linenr_t l; linenr_t extra; /* Num lines added before line1 */ linenr_t num_lines; /* Num lines moved */ linenr_t last_line; /* Last line in file after adding new text */ int has_mark; if (n >= line1 && n < line2) { EMSG("Move lines into themselves"); return FAIL; } num_lines = line2 - line1 + 1; /* * First we copy the old text to its new location -- webb */ if (u_save(n, n + 1) == FAIL) return FAIL; for (extra = 0, l = line1; l <= line2; l++) { str = strsave(ml_get(l + extra)); if (str != NULL) { has_mark = ml_has_mark(l + extra); ml_append(n + l - line1, str, (colnr_t)0, FALSE); vim_free(str); if (has_mark) ml_setmarked(n + l - line1 + 1); if (n < line1) extra++; } } /* * Now we must be careful adjusting our marks so that we don't overlap our * mark_adjust() calls. * * We adjust the marks within the old text so that they refer to the * last lines of the file (temporarily), because we know no other marks * will be set there since these line numbers did not exist until we added * our new lines. * * Then we adjust the marks on lines between the old and new text positions * (either forwards or backwards). * * And Finally we adjust the marks we put at the end of the file back to * their final destination at the new text position -- webb */ last_line = curbuf->b_ml.ml_line_count; mark_adjust(line1, line2, last_line - line2, 0L); if (n >= line2) mark_adjust(line2 + 1, n, -num_lines, 0L); else mark_adjust(n + 1, line1 - 1, num_lines, 0L); mark_adjust(last_line - num_lines + 1, last_line, -(last_line - n - extra), 0L); /* * Now we delete the original text -- webb */ if (u_save(line1 + extra - 1, line2 + extra + 1) == FAIL) return FAIL; for (l = line1; l <= line2; l++) ml_delete(line1 + extra, TRUE); CHANGED; if (!global_busy && num_lines > p_report) smsg((char_u *)"%ld line%s moved", num_lines, plural(num_lines)); return OK; } /* * :copy command - copy lines line1-line2 to line n */ void do_copy(line1, line2, n) linenr_t line1; linenr_t line2; linenr_t n; { linenr_t lnum; char_u *p; mark_adjust(n + 1, MAXLNUM, line2 - line1 + 1, 0L); /* * there are three situations: * 1. destination is above line1 * 2. destination is between line1 and line2 * 3. destination is below line2 * * n = destination (when starting) * curwin->w_cursor.lnum = destination (while copying) * line1 = start of source (while copying) * line2 = end of source (while copying) */ if (u_save(n, n + 1) == FAIL) return; curwin->w_cursor.lnum = n; lnum = line2 - line1 + 1; while (line1 <= line2) { /* need to use strsave() because the line will be unlocked within ml_append */ p = strsave(ml_get(line1)); if (p != NULL) { ml_append(curwin->w_cursor.lnum, p, (colnr_t)0, FALSE); vim_free(p); } /* situation 2: skip already copied lines */ if (line1 == n) line1 = curwin->w_cursor.lnum; ++line1; if (curwin->w_cursor.lnum < line1) ++line1; if (curwin->w_cursor.lnum < line2) ++line2; ++curwin->w_cursor.lnum; } CHANGED; msgmore((long)lnum); } /* * Handle the ":!cmd" command. Also for ":r !cmd" and ":w !cmd" * Bangs in the argument are replaced with the previously entered command. * Remember the argument. */ void do_bang(addr_count, line1, line2, forceit, arg, do_in, do_out) int addr_count; linenr_t line1, line2; int forceit; char_u *arg; int do_in, do_out; { static char_u *prevcmd = NULL; /* the previous command */ char_u *newcmd = NULL; /* the new command */ int ins_prevcmd; char_u *t; char_u *p; char_u *trailarg; int len; int scroll_save = msg_scroll; /* * Disallow shell commands from .exrc and .vimrc in current directory for * security reasons. */ if (secure) { secure = 2; emsg(e_curdir); return; } if (addr_count == 0) /* :! */ { msg_scroll = FALSE; /* don't scroll here */ autowrite_all(); msg_scroll = scroll_save; } /* * Try to find an embedded bang, like in :! ! [args] * (:!! is indicated by the 'forceit' variable) */ ins_prevcmd = forceit; trailarg = arg; do { len = STRLEN(trailarg) + 1; if (newcmd != NULL) len += STRLEN(newcmd); if (ins_prevcmd) { if (prevcmd == NULL) { emsg(e_noprev); vim_free(newcmd); return; } len += STRLEN(prevcmd); } if ((t = alloc(len)) == NULL) { vim_free(newcmd); return; } *t = NUL; if (newcmd != NULL) STRCAT(t, newcmd); if (ins_prevcmd) STRCAT(t, prevcmd); p = t + STRLEN(t); STRCAT(t, trailarg); vim_free(newcmd); newcmd = t; /* * Scan the rest of the argument for '!', which is replaced by the * previous command. "\!" is replaced by "!" (this is vi compatible). */ trailarg = NULL; while (*p) { if (*p == '!') { if (p > newcmd && p[-1] == '\\') vim_memmove(p - 1, p, (size_t)(STRLEN(p) + 1)); else { trailarg = p; *trailarg++ = NUL; ins_prevcmd = TRUE; break; } } ++p; } } while (trailarg != NULL); vim_free(prevcmd); prevcmd = newcmd; if (bangredo) /* put cmd in redo buffer for ! command */ { AppendToRedobuff(prevcmd); AppendToRedobuff((char_u *)"\n"); bangredo = FALSE; } /* * Add quotes around the command, for shells that need them. */ if (*p_shq != NUL) { newcmd = alloc((unsigned)(STRLEN(prevcmd) + 2 * STRLEN(p_shq) + 1)); if (newcmd == NULL) return; STRCPY(newcmd, p_shq); STRCAT(newcmd, prevcmd); STRCAT(newcmd, p_shq); } if (addr_count == 0) /* :! */ { /* echo the command */ msg_start(); msg_outchar(':'); msg_outchar('!'); msg_outtrans(newcmd); msg_clr_eos(); windgoto(msg_row, msg_col); do_shell(newcmd); } else /* :range! */ do_filter(line1, line2, newcmd, do_in, do_out); if (newcmd != prevcmd) vim_free(newcmd); } /* * call a shell to execute a command */ void do_shell(cmd) char_u *cmd; { BUF *buf; int save_nwr; /* * Disallow shell commands from .exrc and .vimrc in current directory for * security reasons. */ if (secure) { secure = 2; emsg(e_curdir); msg_end(); return; } #ifdef WIN32 /* * Check if external commands are allowed now. */ if (can_end_termcap_mode(TRUE) == FALSE) return; #endif /* * For autocommands we want to get the output on the current screen, to * avoid having to type return below. */ msg_outchar('\r'); /* put cursor at start of line */ #ifdef AUTOCMD if (!autocmd_busy) #endif stoptermcap(); msg_outchar('\n'); /* may shift screen one line up */ /* warning message before calling the shell */ if (p_warn #ifdef AUTOCMD && !autocmd_busy #endif ) for (buf = firstbuf; buf; buf = buf->b_next) if (buf->b_changed) { MSG_OUTSTR("[No write since last change]\n"); break; } /* This windgoto is required for when the '\n' resulted in a "delete line 1" * command to the terminal. */ windgoto(msg_row, msg_col); cursor_on(); (void)call_shell(cmd, SHELL_COOKED); need_check_timestamps = TRUE; /* * put the message cursor at the end of the screen, avoids wait_return() to * overwrite the text that the external command showed */ msg_pos((int)Rows - 1, 0); #ifdef AUTOCMD if (autocmd_busy) must_redraw = CLEAR; else #endif { /* * If K_TI is defined, we assume that we switch screens when * starttermcap() is called. In that case we really want to wait for * "hit return to continue". */ save_nwr = no_wait_return; if (*T_TI != NUL) no_wait_return = FALSE; #ifdef AMIGA wait_return(term_console ? -1 : TRUE); /* see below */ #else wait_return(TRUE); #endif no_wait_return = save_nwr; starttermcap(); /* start termcap if not done by wait_return() */ /* * In an Amiga window redrawing is caused by asking the window size. * If we got an interrupt this will not work. The chance that the * window size is wrong is very small, but we need to redraw the * screen. Don't do this if ':' hit in wait_return(). THIS IS UGLY * but it saves an extra redraw. */ #ifdef AMIGA if (skip_redraw) /* ':' hit in wait_return() */ must_redraw = CLEAR; else if (term_console) { OUTSTR("\033[0 q"); /* get window size */ if (got_int) must_redraw = CLEAR; /* if got_int is TRUE, redraw needed */ else must_redraw = 0; /* no extra redraw needed */ } #endif /* AMIGA */ } } /* * do_filter: filter lines through a command given by the user * * We use temp files and the call_shell() routine here. This would normally * be done using pipes on a UNIX machine, but this is more portable to * non-unix machines. The call_shell() routine needs to be able * to deal with redirection somehow, and should handle things like looking * at the PATH env. variable, and adding reasonable extensions to the * command name given by the user. All reasonable versions of call_shell() * do this. * We use input redirection if do_in is TRUE. * We use output redirection if do_out is TRUE. */ static void do_filter(line1, line2, buff, do_in, do_out) linenr_t line1, line2; char_u *buff; int do_in, do_out; { char_u *itmp = NULL; char_u *otmp = NULL; linenr_t linecount; FPOS cursor_save; #ifdef AUTOCMD BUF *old_curbuf = curbuf; #endif /* * Disallow shell commands from .exrc and .vimrc in current directory for * security reasons. */ if (secure) { secure = 2; emsg(e_curdir); return; } if (*buff == NUL) /* no filter command */ return; #ifdef WIN32 /* * Check if external commands are allowed now. */ if (can_end_termcap_mode(TRUE) == FALSE) return; #endif cursor_save = curwin->w_cursor; linecount = line2 - line1 + 1; curwin->w_cursor.lnum = line1; curwin->w_cursor.col = 0; /* * 1. Form temp file names * 2. Write the lines to a temp file * 3. Run the filter command on the temp file * 4. Read the output of the command into the buffer * 5. Delete the original lines to be filtered * 6. Remove the temp files */ if ((do_in && (itmp = vim_tempname('i')) == NULL) || (do_out && (otmp = vim_tempname('o')) == NULL)) { emsg(e_notmp); goto filterend; } /* * The writing and reading of temp files will not be shown. * Vi also doesn't do this and the messages are not very informative. */ ++no_wait_return; /* don't call wait_return() while busy */ if (do_in && buf_write(curbuf, itmp, NULL, line1, line2, FALSE, FALSE, FALSE, TRUE) == FAIL) { msg_outchar('\n'); /* keep message from buf_write() */ --no_wait_return; (void)emsg2(e_notcreate, itmp); /* will call wait_return */ goto filterend; } #ifdef AUTOCMD if (curbuf != old_curbuf) goto filterend; #endif if (!do_out) msg_outchar('\n'); #if (defined(UNIX) && !defined(ARCHIE)) || defined(OS2) /* * put braces around the command (for concatenated commands) */ sprintf((char *)IObuff, "(%s)", (char *)buff); if (do_in) { STRCAT(IObuff, " < "); STRCAT(IObuff, itmp); } #else /* * for shells that don't understand braces around commands, at least allow * the use of commands in a pipe. */ STRCPY(IObuff, buff); if (do_in) { char_u *p; /* * If there is a pipe, we have to put the '<' in front of it. * Don't do this when 'shellquote' is not empty, otherwise the redirection * would be inside the quotes. */ p = vim_strchr(IObuff, '|'); if (p && *p_shq == NUL) *p = NUL; STRCAT(IObuff, " < "); STRCAT(IObuff, itmp); p = vim_strchr(buff, '|'); if (p && *p_shq == NUL) STRCAT(IObuff, p); } #endif if (do_out) { char_u *p; if ((p = vim_strchr(p_srr, '%')) != NULL && p[1] == 's') { p = IObuff + STRLEN(IObuff); *p++ = ' '; /* not really needed? Not with sh, ksh or bash */ sprintf((char *)p, (char *)p_srr, (char *)otmp); } else sprintf((char *)IObuff + STRLEN(IObuff), " %s %s", (char *)p_srr, (char *)otmp); } windgoto((int)Rows - 1, 0); cursor_on(); /* * When not redirecting the output the command can write anything to the * screen. If 'shellredir' is equal to ">", screen may be messed up by * stderr output of external command. Clear the screen later. * If do_in is FALSE, this could be something like ":r !cat", which may * also mess up the screen, clear it later. */ if (!do_out || STRCMP(p_srr, ">") == 0 || !do_in) must_redraw = CLEAR; else redraw_later(NOT_VALID); /* * When call_shell() fails wait_return() is called to give the user a * chance to read the error messages. Otherwise errors are ignored, so you * can see the error messages from the command that appear on stdout; use * 'u' to fix the text * Switch to cooked mode when not redirecting stdin, avoids that something * like ":r !cat" hangs. */ if (call_shell(IObuff, SHELL_FILTER | SHELL_COOKED) == FAIL) { must_redraw = CLEAR; wait_return(FALSE); } need_check_timestamps = TRUE; if (do_out) { if (u_save((linenr_t)(line2), (linenr_t)(line2 + 1)) == FAIL) { goto error; } if (readfile(otmp, NULL, line2, FALSE, (linenr_t)0, MAXLNUM, TRUE) == FAIL) { msg_outchar('\n'); emsg2(e_notread, otmp); goto error; } #ifdef AUTOCMD if (curbuf != old_curbuf) goto filterend; #endif if (do_in) { /* put cursor on first filtered line for ":range!cmd" */ curwin->w_cursor.lnum = line1; dellines(linecount, TRUE, TRUE); curbuf->b_op_start.lnum -= linecount; /* adjust '[ */ curbuf->b_op_end.lnum -= linecount; /* adjust '] */ write_lnum_adjust(-linecount); /* adjust last line for next write */ } else { /* put cursor on last new line for ":r !cmd" */ curwin->w_cursor.lnum = curbuf->b_op_end.lnum; linecount = curbuf->b_op_end.lnum - curbuf->b_op_start.lnum + 1; } beginline(TRUE); /* cursor on first non-blank */ --no_wait_return; if (linecount > p_report) { if (do_in) { sprintf((char *)msg_buf, "%ld lines filtered", (long)linecount); if (msg(msg_buf) && !msg_scroll) keep_msg = msg_buf; /* display message after redraw */ } else msgmore((long)linecount); } } else { error: /* put cursor back in same position for ":w !cmd" */ curwin->w_cursor = cursor_save; --no_wait_return; wait_return(FALSE); } filterend: #ifdef AUTOCMD if (curbuf != old_curbuf) { --no_wait_return; EMSG("*Filter* Autocommands must not change current buffer"); } #endif if (itmp != NULL) vim_remove(itmp); if (otmp != NULL) vim_remove(otmp); vim_free(itmp); vim_free(otmp); } #ifdef VIMINFO static int no_viminfo __ARGS((void)); static int viminfo_errcnt; static int no_viminfo() { /* "vim -i NONE" does not read or write a viminfo file */ return (use_viminfo != NULL && STRCMP(use_viminfo, "NONE") == 0); } /* * Report an error for reading a viminfo file. * Count the number of errors. When there are more than 10, return TRUE. */ int viminfo_error(message, line) char *message; char_u *line; { sprintf((char *)IObuff, "viminfo: %s in line: ", message); STRNCAT(IObuff, line, IOSIZE - STRLEN(IObuff)); emsg(IObuff); if (++viminfo_errcnt >= 10) { EMSG("viminfo: Too many errors, skipping rest of file"); return TRUE; } return FALSE; } /* * read_viminfo() -- Read the viminfo file. Registers etc. which are already * set are not over-written unless force is TRUE. -- webb */ int read_viminfo(file, want_info, want_marks, forceit) char_u *file; int want_info; int want_marks; int forceit; { FILE *fp; if (no_viminfo()) return FAIL; file = viminfo_filename(file); /* may set to default if NULL */ if ((fp = fopen((char *)file, READBIN)) == NULL) return FAIL; viminfo_errcnt = 0; do_viminfo(fp, NULL, want_info, want_marks, forceit); fclose(fp); return OK; } /* * write_viminfo() -- Write the viminfo file. The old one is read in first so * that effectively a merge of current info and old info is done. This allows * multiple vims to run simultaneously, without losing any marks etc. If * forceit is TRUE, then the old file is not read in, and only internal info is * written to the file. -- webb */ void write_viminfo(file, forceit) char_u *file; int forceit; { FILE *fp_in = NULL; FILE *fp_out = NULL; char_u *tempname = NULL; if (no_viminfo()) return; file = viminfo_filename(file); /* may set to default if NULL */ file = strsave(file); /* make a copy, don't want NameBuff */ if (file != NULL) { fp_in = fopen((char *)file, READBIN); if (fp_in == NULL) fp_out = fopen((char *)file, WRITEBIN); else if ((tempname = vim_tempname('o')) != NULL) fp_out = fopen((char *)tempname, WRITEBIN); } if (file == NULL || fp_out == NULL) { EMSG2("Can't write viminfo file %s!", file == NULL ? (char_u *)"" : fp_in == NULL ? file : tempname); if (fp_in != NULL) fclose(fp_in); goto end; } viminfo_errcnt = 0; do_viminfo(fp_in, fp_out, !forceit, !forceit, FALSE); fclose(fp_out); /* errors are ignored !? */ if (fp_in != NULL) { fclose(fp_in); /* * In case of an error, don't overwrite the original viminfo file. */ if (viminfo_errcnt || vim_rename(tempname, file) == -1) vim_remove(tempname); } end: vim_free(file); vim_free(tempname); } static char_u * viminfo_filename(file) char_u *file; { if (file == NULL || *file == NUL) { expand_env(use_viminfo == NULL ? (char_u *)VIMINFO_FILE : use_viminfo, NameBuff, MAXPATHL); return NameBuff; } return file; } /* * do_viminfo() -- Should only be called from read_viminfo() & write_viminfo(). */ static void do_viminfo(fp_in, fp_out, want_info, want_marks, force_read) FILE *fp_in; FILE *fp_out; int want_info; int want_marks; int force_read; { int count = 0; int eof = FALSE; char_u *line; if ((line = alloc(LSIZE)) == NULL) return; if (fp_in != NULL) { if (want_info) eof = read_viminfo_up_to_marks(line, fp_in, force_read); else /* Skip info, find start of marks */ while (!(eof = vim_fgets(line, LSIZE, fp_in)) && line[0] != '>') ; } if (fp_out != NULL) { /* Write the info: */ fprintf(fp_out, "# This viminfo file was generated by vim\n"); fprintf(fp_out, "# You may edit it if you're careful!\n\n"); write_viminfo_search_pattern(fp_out); write_viminfo_sub_string(fp_out); write_viminfo_history(fp_out); write_viminfo_registers(fp_out); write_viminfo_filemarks(fp_out); count = write_viminfo_marks(fp_out); } if (fp_in != NULL && want_marks) copy_viminfo_marks(line, fp_in, fp_out, count, eof); vim_free(line); } /* * read_viminfo_up_to_marks() -- Only called from do_viminfo(). Reads in the * first part of the viminfo file which contains everything but the marks that * are local to a file. Returns TRUE when end-of-file is reached. -- webb */ static int read_viminfo_up_to_marks(line, fp, forceit) char_u *line; FILE *fp; int forceit; { int eof; prepare_viminfo_history(forceit ? 9999 : 0); eof = vim_fgets(line, LSIZE, fp); while (!eof && line[0] != '>') { switch (line[0]) { case NUL: case '\r': case '\n': case '#': /* A comment */ eof = vim_fgets(line, LSIZE, fp); break; case '"': eof = read_viminfo_register(line, fp, forceit); break; case '/': /* Search string */ case '&': /* Substitute search string */ case '~': /* Last search string, followed by '/' or '&' */ eof = read_viminfo_search_pattern(line, fp, forceit); break; case '$': eof = read_viminfo_sub_string(line, fp, forceit); break; case ':': case '?': eof = read_viminfo_history(line, fp); break; case '\'': /* How do we have a file mark when the file is not in the * buffer list? */ eof = read_viminfo_filemark(line, fp, forceit); break; #if 0 case '+': /* eg: "+40 /path/dir file", for running vim with no args */ eof = vim_fgets(line, LSIZE, fp); break; #endif default: if (viminfo_error("Illegal starting char", line)) eof = TRUE; else eof = vim_fgets(line, LSIZE, fp); break; } } finish_viminfo_history(); return eof; } /* * check string read from viminfo file * remove '\n' at the end of the line * - replace CTRL-V CTRL-V with CTRL-V * - replace CTRL-V 'n' with '\n' */ void viminfo_readstring(p) char_u *p; { while (*p != NUL && *p != '\n') { if (*p == Ctrl('V')) { if (p[1] == 'n') p[0] = '\n'; vim_memmove(p + 1, p + 2, STRLEN(p)); } ++p; } *p = NUL; } /* * write string to viminfo file * - replace CTRL-V with CTRL-V CTRL-V * - replace '\n' with CTRL-V 'n' * - add a '\n' at the end */ void viminfo_writestring(fd, p) FILE *fd; char_u *p; { register int c; while ((c = *p++) != NUL) { if (c == Ctrl('V') || c == '\n') { putc(Ctrl('V'), fd); if (c == '\n') c = 'n'; } putc(c, fd); } putc('\n', fd); } #endif /* VIMINFO */ /* * Implementation of ":fixdel", also used by get_stty(). * resulting * ^? ^H * not ^? ^? */ void do_fixdel() { char_u *p; p = find_termcode((char_u *)"kb"); add_termcode((char_u *)"kD", p != NULL && *p == 0x7f ? (char_u *)"\010" : (char_u *)"\177"); } static void print_line_no_prefix(lnum, use_number) linenr_t lnum; int use_number; { char_u numbuf[20]; if (curwin->w_p_nu || use_number) { sprintf((char *)numbuf, "%7ld ", (long)lnum); set_highlight('n'); /* Highlight line numbers */ start_highlight(); msg_outstr(numbuf); stop_highlight(); } msg_prt_line(ml_get(lnum)); } void print_line(lnum, use_number) linenr_t lnum; int use_number; { msg_outchar('\n'); print_line_no_prefix (lnum, use_number); } void print_line_cr(lnum, use_number) linenr_t lnum; int use_number; { msg_outchar('\r'); print_line_no_prefix (lnum, use_number); } /* * Implementation of ":file[!] [fname]". */ void do_file(arg, forceit) char_u *arg; int forceit; { char_u *fname, *sfname; BUF *buf; if (*arg != NUL) { /* * The name of the current buffer will be changed. * A new buffer entry needs to be made to hold the old * file name, which will become the alternate file name. */ fname = curbuf->b_filename; sfname = curbuf->b_sfilename; curbuf->b_filename = NULL; curbuf->b_sfilename = NULL; if (setfname(arg, NULL, TRUE) == FAIL) { curbuf->b_filename = fname; curbuf->b_sfilename = sfname; return; } curbuf->b_notedited = TRUE; buf = buflist_new(fname, sfname, curwin->w_cursor.lnum, FALSE); if (buf != NULL) curwin->w_alt_fnum = buf->b_fnum; vim_free(fname); vim_free(sfname); } /* print full filename if :cd used */ fileinfo(did_cd, FALSE, forceit); } /* * do the Ex mode :insert and :append commands */ void ex_insert (int before, linenr_t whatline) { /* put the cursor somewhere sane if we insert nothing */ if (whatline > curbuf->b_ml.ml_line_count) { curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count; } else { curwin->w_cursor.lnum = whatline; } while (1) { char_u *theline; if (((theline = getcmdline (' ', 1L)) == 0) || ((theline[0] == '.') && (theline[1] == 0))) { break; } if (before) { mark_adjust (whatline, MAXLNUM, 1, 0L); ml_append (whatline - 1, theline, (colnr_t) 0, FALSE); curwin->w_cursor.lnum = whatline; } else { mark_adjust (whatline + 1, MAXLNUM, 1, 0L); ml_append (whatline, theline, (colnr_t) 0, FALSE); curwin->w_cursor.lnum = whatline + 1; } vim_free (theline); whatline++; } CHANGED; beginline (MAYBE); updateScreen (NOT_VALID); } /* * do the Ex mode :change command */ void ex_change (linenr_t start, linenr_t end) { while (end >= start) { ml_delete (start, FALSE); end--; } ex_insert (TRUE, start); } void ex_z (linenr_t line, char_u *arg) { char_u *x; int bigness = curwin->w_height - 3; char_u kind; int minus = 0; linenr_t start, end, curs, i; if (arg == 0) { /* is this possible? I don't remember */ arg = ""; } if (bigness < 1) { bigness = 1; } x = arg; if (*x == '-' || *x == '+' || *x == '=' || *x == '^' || *x == '.') x++; if (*x != 0) { if (!isdigit (*x)) { EMSG ("non-numeric argument to :z"); return; } else { bigness = atoi (x); } } kind = *arg; switch (kind) { case '-': start = line - bigness; end = line; curs = line; break; case '=': start = line - bigness / 2 + 1; end = line + bigness / 2 - 1; curs = line; minus = 1; break; case '^': start = line - bigness * 2; end = line - bigness; curs = line - bigness; break; case '.': start = line - bigness / 2; end = line + bigness / 2; curs = end; break; default: /* '+' */ start = line; end = line + bigness; curs = end; break; } if (start < 1) { start = 1; } if (end > curbuf->b_ml.ml_line_count) { end = curbuf->b_ml.ml_line_count; } if (curs > curbuf->b_ml.ml_line_count) { curs = curbuf->b_ml.ml_line_count; } for (i = start; i <= end; i++) { int j; if (minus && (i == line)) { msg_outchar ('\n'); for (j = 1; j < Columns; j++) { msg_outchar ('-'); } } print_line (i, FALSE); if (minus && (i == line)) { msg_outchar ('\n'); for (j = 1; j < Columns; j++) { msg_outchar ('-'); } } } curwin->w_cursor.lnum = curs; }