*vim_w32.txt* For Vim version 4.5. Last modification: 1996 Sep 30 This file documents the idiosyncrasies of the Win32 version of Vim. The Win32 version was written by George V. Reilly . The original Windows NT port was done by Roger Knobbe . The Win32 version of Vim works on both Windows NT and Windows 95. It is a console-mode application (i.e., it runs in a command prompt window or a "DOS box"). It is not a full-fledged Windows GUI application, although it may become one some day. It will not run in the Win32s subsystem in Windows 3.1; use the 32-bit DOS version of Vim instead. See |vim_dos.txt|. KNOWN PROBLEMS There are a few known problems with running the Win32 Vim on Windows 95. Comments from somebody working at Microsoft: "Win95 console support has always been and will always be flaky". - Dead key support doesn't work. - Resizing the window with ":set columns=nn rows=n" works, but executing external commands may cause the system to crash. If this bothers you, use the 32 bit MS-DOS version. - When doing filename completion, matches for the short filename will also be found. But this will result in the corresponding long filename. For example, if you have the long file name "this_is_a_test" with the short filename "this_i~1", the command ":e *1" will start editing "this_is_a_test". LOCATION OF DOCUMENTATION and VIMRC FILE You should set the environment variable "VIM" to the directory where the Vim documentation files are. If "VIM" is used but not defined, "HOME" is tried too. If the HOME environment variable is not set, the value "C:/" is used as a default. The default help filename is "$VIM\vim_help.txt". If the environment variable $VIM is not defined or the file is not found, the Win32 search path is used to search for the file "vim_help.txt". If you do not want to put "vim_help.txt" in your search path, use the command ":set helpfile=pathname" to tell Vim where the help file is. |'helpfile'| Vim will look for initializations in eight places. The first that is found is used and the others are ignored. The order is: - The environment variable VIMINIT - The file "$VIM/_vimrc" - The file "$HOME/_vimrc" - The file "$VIM/.vimrc" - The file "$HOME/.vimrc" - The environment variable EXINIT - The file "$VIM/_exrc" - The file "$HOME/_exrc" USING BACKSLASHES Using backslashes in file names can be a problem. Vi halves the number of backslashes for some commands. Vim is a bit more tolerant and backslashes are not removed from a file name, so ":e c:\foo\bar" works as expected. But when a backslash is used before a special character (space, comma, backslash, etc.), it is removed. Use slashes to avoid problems: ":e c:/foo/bar" works fine. Vim will replace the slashes with backslashes internally, to avoid problems with some MS-DOS programs and Win32 programs. USING COLORS You can set the color used in five modes with nine termcap options. Which of the five modes is used for which action depends on the |'highlight'| option. ":set t_mr=^V^[\|xxm" start of invert mode ":set t_md=^V^[\|xxm" start of bold mode ":set t_me=^V^[\|xxm" back to normal text ":set t_so=^V^[\|xxm" start of standout mode ":set t_se=^V^[\|xxm" back to normal text ":set t_us=^V^[\|xxm" start of underline mode ":set t_ue=^V^[\|xxm" back to normal text ":set t_ZH=^V^[\|xxm" start of italics mode ":set t_ZR=^V^[\|xxm" back to normal text ^V is CTRL-V ^[ is xx must be replaced with a decimal code, which is the foreground color number and background color number added together: COLOR FOREGROUND BACKGROUND black 0 0 blue 1 16 green 2 32 cyan 3 48 red 4 64 magenta 5 80 brown 6 96 lightgray 7 112 darkgray 8 128 lightblue 9 144 lightgreen 10 160 lighcyan 11 176 lightred 12 192 lightmagenta 13 208 yellow 14 224 white 15 240 When you use 0, the color is reset to the one used when you started Vim (usually 7, lightgray on black, but you can override this in NT. If you have overridden the default colors in a command prompt, you may need to adjust some of the highlight colors in your vimrc---see below). The defaults for the various highlight modes are: t_mr 112 reverse mode: black text (0) on lightgray (112) t_md 63 bold mode: white text (15) on cyan (48) t_me 0 normal mode (revert to default) t_so 31 standout mode: white (15) text on blue (16) t_se 0 standout mode end (revert to default) t_czh 225 italic mode: blue text (1) on yellow (224) t_czr 0 italic mode end (revert to default) t_us 67 underline mode: cyan text (3) on red (64) t_ue 0 underline mode end (revert to default) These colors were chosen because they also look good when using an inverted display, but you can change them to your liking. Example: :set t_mr=^V^[\|97m " start of invert mode: blue (1) on brown (96) :set t_md=^V^[\|67m " start of bold mode: cyan (3) on red (64) :set t_me=^V^[\|112m " back to normal mode: black (0) on light gray (112) :set t_so=^V^[\|37m " start of standout mode: magenta (5) on green (32) :set t_se=^V^[\|112m " back to normal mode: black (0) on light gray (112) TEXTMODE or NON-MS-DOS FILES If the "tx" (textmode) option is set (which is the default), Vim will accept a single or a pair for end-of-line. When writing a file, Vim will use . Thus, if you edit a file and write it, is replaced with . If the "tx" option is not set, a single will be used for end-of-line. A will be shown as ^M. You can use Vim to replace with by reading in any mode and writing in text mode (":se tx"). You can use Vim to replace with by reading in text mode and writing in non-text mode (":se notx"). 'textmode' is set automatically when 'textauto' is on (which is the default), so you don't really have to worry about what you are doing. |'textmode'| |'textauto'| If you want to edit a script file or a binary file, you should reset the 'textmode' and 'textauto' options before loading the file. Script files and binary files may contain single characters which would be replaced with . You can reset 'textmode' and 'textauto' automatically by starting Vim with the "-b" (binary) option. :CD COMMAND The ":cd" command recognizes the drive specifier and changes the current drive. Use ":cd c:" to make drive C the active drive. Use ":cd d:\foo" to go to the directory "foo" in the root of drive D. UNC names are also recognized; e.g., ":cd \\server\share\dir". |:cd| INTERRUPTING Use CTRL-BREAK instead of CTRL-C to interrupt searches. The CTRL-C is not detected until a key is read. TEMP FILES Temporary files (for filtering) are put in the first directory in the next list that exists and where a file can be created: $TMP $TEMP C:\TMP C:\TEMP current directory SHELL OPTION DEFAULT *win32_shell* The default for the 'sh' ('shell') option is "command.com" on Windows 95 and "cmd.exe" on Windows NT. If SHELL is defined, it is used instead, and if SHELL is not defined but COMSPEC is, COMPSPEC is used. External commands are started with " /c ". Typing CTRL-Z starts a new command subshell. Return to Vim with "exit". |'shell'| |CTRL-Z| If you are running a third-party shell, you may need to set the |'shellcmdflag'| ('shcf') and |'shellquote'| ('shq') options. For example, with the MKS Korn shell or with bash, the values of the options should be: 'shellcmdflag' -c 'shellquote' " This will start the shell as -c "" "-c" is needed in place of "/c" and double quotes are needed around the command passed to the shell. Vim will check for the presence of "sh" anywhere in the 'shell' option. If it is present, the 'shellcmdflag' and 'shellquote' option will be set to "-c" and "\"". TERM OPTION DEFAULT *win32_term* The only kind of terminal type that the Win32 version of Vim understands is "win32", which is built-in. If you set 'term' to anything else, you will probably get very strange behaviour from Vim. Therefore the default value of 'term' is not obtained from the environment variable "TERM". RESTORE SCREEN CONTENTS When 'restorescreen' is set (which is the default), Vim will restore the original contents of the console when exiting or when executing external commands. If you don't want this, use ":set nors". |'restorescreen'| COMPILING Vim for Win32 compiles with the Microsoft Visual C++ 2.0 compiler and later, and with the Borland C++ 4.5 32-bit compiler and later. It compiles on Windows 95 and all four NT platforms: i386, Alpha, MIPS, and PowerPC. The NT/i386 and the Windows 95 binaries are identical. Use Makefile.w32 to compile with Visual C++ and Makefile.b32 to compile with Borland C++. The Win32 binary was compiled with Visual C++ version 4.0, using Makefile.w32. Other compilers should also work. If you get all kinds of strange error messages when compiling (you shouldn't with the Microsoft or Borland 32-bit compilers), try adding characters at the end of each line. This can be done with the addcr program: "nmake -f makefile.w32 addcr". This will compile addcr.c to addcr.exe and then execute the addcr.bat file. Sometimes this fails. In that case, execute the addcr.bat file from the DOS prompt. USING THE MOUSE The Win32 version of Vim supports using the mouse. If you have a two-button mouse, the middle button can be emulated by pressing both left and right buttons simultaneously. |mouse_using| WIN32 FAQ *win32_faq* Q. Why does the Win32 version of Vim update the screen so slowly on Windows 95? A. The support for Win32 console mode applications is very buggy in Win95. For some unknown reason, the screen updates very slowly when Vim is run at one of the standard resolutions (80x25, 80x43, or 80x50) and the 16-bit DOS version updates the screen much more quickly than the Win32 version. However, if the screen is set to some other resolution, such as by ":set columns=100" or ":set lines=40", screen updating becomes about as fast as it is with the 16-bit version. WARNING: Changing 'columns' may make Windows 95 crash while updating the window (complaints --> Microsoft). Since this mostly works, this has not been disabled, but be careful with changing 'columns'. Changing the screen resolution makes updates faster, but it brings problems with it of its own. External commands (e.g., ":!dir") can cause Vim to freeze when the screen is set to a non-standard resolution, particularly when 'columns' is not equal to 80. It is not possible for Vim to reliably set the screen resolution back to the value it had upon startup before running external commands, so if you change the number of 'lines' or 'columns', be very, very careful. In fact, Vim will not allow you to execute external commands when 'columns' is not equal to 80, because it is so likely to freeze up afterwards. None of the above applies on Windows NT. Screen updates are fast, no matter how many 'lines' or 'columns' the window is set to, and external commands will not cause Vim to freeze. Q. So if the Win32 version updates the screen so slowly on Windows 95 and the 16-bit DOS version updates the screen quickly, why would I want to run the Win32 version? A. Firstly, the Win32 version isn't that slow, especially when the screen is set to some non-standard number of 'lines' or 'columns'. Secondly, the 16-bit DOS version has some severe limitations: It can't do big changes and it doesn't know about long filenames. The Win32 version doesn't have these limitations and it's faster overall (the same is true for the 32-bit DJGPP DOS version of Vim). The Win32 version is smarter about handling the screen, the mouse, and the keyboard than the DJGPP version is. Q. And what about the 16-bit DOS version versus the Win32 version on NT? A. There are no good reasons to run the 16-bit DOS version on NT. The Win32 version updates the screen just as fast as the 16-bit version does when running on NT. All of the above disadvantages apply. Finally, DOS applications can take a long time to start up and will run more slowly. On non-Intel NT platforms, the DOS version is almost unusably slow, because it runs on top of an 80x86 emulator. Q. Why can't I paste into Vim when running Windows 95? A. In the properties dialog box for the MS-DOS window, go to "MS-DOS Prompt/Misc/Fast pasting" and make sure that it is NOT checked. You should also do ":set paste" in Vim to avoid unexpected effects. |'paste'| Q. How do I type dead keys on Windows 95? (A dead key is an accent key, such as acute, grave, or umlaut, that doesn't produce a character by itself, but when followed by another key, produces an accented character, such as a-acute, e-grave, u-umlaut, n-tilde, and so on. Very useful for most European languages. English-language keyboard layouts don't use dead keys, as far as we know.) A. You don't. The console mode input routines simply do not work correctly in Windows 95, and I have not been able to work around them. In the words of a senior developer at Microsoft: Win95 console support has always been and will always be flaky. The flakiness is unavoidable because we are stuck between the world of MS-DOS keyboard TSRs like KEYB (which wants to cook the data; important for international) and the world of Win32. So keys that don't "exist" in MS-DOS land (like dead keys) have a very tenuous existence in Win32 console land. Keys that act differently between MS-DOS land and Win32 console land (like capslock) will act flaky. Don't even _mention_ the problems with multiple language keyboard layouts... You may be able to fashion some sort of workaround with the digraphs mechanism. |digraphs| Alternatively, you can try one of the DOS versions of Vim where dead keys reportedly do work. Q. How do I type dead keys on Windows NT? A. Dead keys work on NT 3.51. Just type them as you would in any other application. On NT 4.0, you need to make sure that the default locale (set in the Keyboard part of the Control Panel) is the same as the currently active locale. Otherwise the NT code will get confused and crash! This is a NT 4.0 problem, not really a Vim problem. Q. When will a real GUI version of Vim (gvim) for Win32 with scrollbars, menus, pasting from the clipboard, and so on become available? A. A few months after Vim 4.0 is released. Apart from the features you might expect in gvim (see |vim_gui.txt|), it is expected that a real GUI version will also be able to handle dead keys correctly and that the problems with external commands will be a thing of the past. Q. I'm using Vim to edit a symbolically linked file on a Unix NFS file server. When I write the file, Vim does not "write through" the symlink. Instead, it deletes the symbolic link and creates a new file in its place. Why? A. On Unix, Vim is prepared for links (symbolic or hard). A backup copy of the original file is made and then the original file is overwritten. This assures that all properties of the file remain the same. On non-Unix systems, the original file is renamed and a new file is written. Only the protection bits are set like the original file. However, this doesn't work properly when working on an NFS-mounted file system where links and other things exist. The only way to fix this in the current version is not making a backup file, by ":set nobackup nowritebackup" |'writebackup'| vim:ts=8:sw=8:js:tw=78:fo=tcq2: