.\" $OpenBSD: authpf.8,v 1.42 2006/10/23 07:05:49 jmc Exp $ .\" .\" Copyright (c) 2002 Bob Beck (beck@openbsd.org>. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .Dd January 10, 2002 .Dt AUTHPF 8 .Os .Sh NAME .Nm authpf .Nd authenticating gateway user shell .Sh SYNOPSIS .Nm authpf .Sh DESCRIPTION .Nm is a user shell for authenticating gateways. It is used to change .Xr pf 4 rules when a user authenticates and starts a session with .Xr sshd 8 and to undo these changes when the user's session exits. It is designed for changing filter and translation rules for an individual source IP address as long as a user maintains an active .Xr ssh 1 session. Typical use would be for a gateway that authenticates users before allowing them Internet use, or a gateway that allows different users into different places. .Nm logs the successful start and end of a session to .Xr syslogd 8 . This, combined with properly set up filter rules and secure switches, can be used to ensure users are held accountable for their network traffic. .Pp .Nm can add filter and translation rules using the syntax described in .Xr pf.conf 5 . .Nm requires that the .Xr pf 4 system be enabled before use. .Nm can also maintain the list of IP address of connected users in the "authpf_users" .Pa table . .Pp .Nm is meant to be used with users who can connect via .Xr ssh 1 only. On startup, .Nm retrieves the client's connecting IP address via the .Ev SSH_CLIENT environment variable and, after performing additional access checks, reads a template file to determine what filter and translation rules (if any) to add. On session exit the same rules that were added at startup are removed. .Pp Each .Nm process stores its rules in a separate ruleset inside a .Xr pf 4 .Pa anchor shared by all .Nm processes. By default, the .Pa anchor name "authpf" is used, and the ruleset names equal the username and PID of the .Nm processes as "username(pid)". The following rules need to be added to the main ruleset .Pa /etc/pf.conf in order to cause evaluation of any .Nm rules: .Bd -literal -offset indent nat-anchor "authpf/*" rdr-anchor "authpf/*" binat-anchor "authpf/*" anchor "authpf/*" .Ed .Pp The "/*" at the end of the anchor name is required for .Xr pf 4 to process the rulesets attached to the anchor by .Nm authpf . .Sh FILTER AND TRANSLATION RULES Filter and translation rules for .Nm use the same format described in .Xr pf.conf 5 . The only difference is that these rules may (and probably should) use the macro .Em user_ip , which is assigned the connecting IP address whenever .Nm is run. Additionally, the macro .Em user_id is assigned the user name. .Pp Filter and translation rules are stored in a file called .Pa authpf.rules . This file will first be searched for in .Pa /etc/authpf/users/$USER/ and then in .Pa /etc/authpf/ . Only one of these files will be used if both are present. .Pp Per-user rules from the .Pa /etc/authpf/users/$USER/ directory are intended to be used when non-default rules are needed on an individual user basis. It is important to ensure that a user can not write or change these configuration files. .Pp The .Pa authpf.rules file must exist in one of the above locations for .Nm to run. .Sh CONFIGURATION Options are controlled by the .Pa /etc/authpf/authpf.conf file. If the file is empty, defaults are used for all configuration options. The file consists of pairs of the form .Li name=value , one per line. Currently, the allowed values are as follows: .Bl -tag -width Ds .It anchor=name Use the specified .Pa anchor name instead of "authpf". .It table=name Use the specified .Pa table name instead of "authpf_users". .El .Sh USER MESSAGES On successful invocation, .Nm displays a message telling the user he or she has been authenticated. It will additionally display the contents of the file .Pa /etc/authpf/authpf.message if the file exists and is readable. .Pp There exist two methods for providing additional granularity to the control offered by .Nm - it is possible to set the gateway to explicitly allow users who have authenticated to .Xr ssh 1 and deny access to only a few troublesome individuals. This is done by creating a file with the banned user's login name as the filename in .Pa /etc/authpf/banned/ . The contents of this file will be displayed to a banned user, thus providing a method for informing the user that they have been banned, and where they can go and how to get there if they want to have their service restored. This is the default behaviour. .Pp It is also possible to configure .Nm to only allow specific users access. This is done by listing their login names, one per line, in .Pa /etc/authpf/authpf.allow . If "*" is found on a line, then all usernames match. If .Nm is unable to verify the user's permission to use the gateway, it will print a brief message and die. It should be noted that a ban takes precedence over an allow. .Pp On failure, messages will be logged to .Xr syslogd 8 for the system administrator. The user does not see these, but will be told the system is unavailable due to technical difficulties. The contents of the file .Pa /etc/authpf/authpf.problem will also be displayed if the file exists and is readable. .Sh CONFIGURATION ISSUES .Nm maintains the changed filter rules as long as the user maintains an active session. It is important to remember however, that the existence of this session means the user is authenticated. Because of this, it is important to configure .Xr sshd 8 to ensure the security of the session, and to ensure that the network through which users connect is secure. .Xr sshd 8 should be configured to use the .Ar ClientAliveInterval and .Ar ClientAliveCountMax parameters to ensure that a ssh session is terminated quickly if it becomes unresponsive, or if arp or address spoofing is used to hijack the session. Note that TCP keepalives are not sufficient for this, since they are not secure. Also note that the various SSH tunnelling mechanisms, such as .Ar AllowTcpForwarding and .Ar PermitTunnel , should be disabled for .Nm users to prevent them from circumventing restrictions imposed by the packet filter ruleset. .Pp .Nm will remove state table entries that were created during a user's session. This ensures that there will be no unauthenticated traffic allowed to pass after the controlling .Xr ssh 1 session has been closed. .Pp .Nm is designed for gateway machines which typically do not have regular (non-administrative) users using the machine. An administrator must remember that .Nm can be used to modify the filter rules through the environment in which it is run, and as such could be used to modify the filter rules (based on the contents of the configuration files) by regular users. In the case where a machine has regular users using it, as well as users with .Nm as their shell, the regular users should be prevented from running .Nm by using the .Pa /etc/authpf/authpf.allow or .Pa /etc/authpf/banned/ facilities. .Pp .Nm modifies the packet filter and address translation rules, and because of this it needs to be configured carefully. .Nm will not run and will exit silently if the .Pa /etc/authpf/authpf.conf file does not exist. After considering the effect .Nm may have on the main packet filter rules, the system administrator may enable .Nm by creating an appropriate .Pa /etc/authpf/authpf.conf file. .Sh EXAMPLES .Sy Control Files \- To illustrate the user-specific access control mechanisms, let us consider a typical user named bob. Normally, as long as bob can authenticate himself, the .Nm program will load the appropriate rules. Enter the .Pa /etc/authpf/banned/ directory. If bob has somehow fallen from grace in the eyes of the powers-that-be, they can prohibit him from using the gateway by creating the file .Pa /etc/authpf/banned/bob containing a message about why he has been banned from using the network. Once bob has done suitable penance, his access may be restored by moving or removing the file .Pa /etc/authpf/banned/bob . .Pp Now consider a workgroup containing alice, bob, carol and dave. They have a wireless network which they would like to protect from unauthorized use. To accomplish this, they create the file .Pa /etc/authpf/authpf.allow which lists their login ids, one per line. At this point, even if eve could authenticate to .Xr sshd 8 , she would not be allowed to use the gateway. Adding and removing users from the work group is a simple matter of maintaining a list of allowed userids. If bob once again manages to annoy the powers-that-be, they can ban him from using the gateway by creating the familiar .Pa /etc/authpf/banned/bob file. Though bob is listed in the allow file, he is prevented from using this gateway due to the existence of a ban file. .Pp .Sy Distributed Authentication \- It is often desirable to interface with a distributed password system rather than forcing the sysadmins to keep a large number of local password files in sync. The .Xr login.conf 5 mechanism in .Ox can be used to fork the right shell. To make that happen, .Xr login.conf 5 should have entries that look something like this: .Bd -literal -offset indent shell-default:shell=/bin/csh default:\e ... :shell=/usr/sbin/authpf daemon:\e ... :shell=/bin/csh:\e :tc=default: staff:\e ... :shell=/bin/csh:\e :tc=default: .Ed .Pp Using a default password file, all users will get .Nm as their shell except for root who will get .Pa /bin/csh . .Pp .Sy SSH Configuration \- As stated earlier, .Xr sshd 8 must be properly configured to detect and defeat network attacks. To that end, the following options should be added to .Xr sshd_config 5 : .Bd -literal -offset indent Protocol 2 ClientAliveInterval 15 ClientAliveCountMax 3 .Ed .Pp This ensures that unresponsive or spoofed sessions are terminated within a minute, since a hijacker should not be able to spoof ssh keepalive messages. .Pp .Sy Banners \- Once authenticated, the user is shown the contents of .Pa /etc/authpf/authpf.message . This message may be a screen-full of the appropriate use policy, the contents of .Pa /etc/motd or something as simple as the following: .Bd -literal -offset indent This means you will be held accountable by the powers that be for traffic originating from your machine, so please play nice. .Ed .Pp To tell the user where to go when the system is broken, .Pa /etc/authpf/authpf.problem could contain something like this: .Bd -literal -offset indent Sorry, there appears to be some system problem. To report this problem so we can fix it, please phone 1-900-314-1597 or send an email to remove@bulkmailerz.net. .Ed .Pp .Sy Packet Filter Rules \- In areas where this gateway is used to protect a wireless network (a hub with several hundred ports), the default rule set as well as the per-user rules should probably allow very few things beyond encrypted protocols like .Xr ssh 1 , .Xr ssl 8 , or .Xr ipsec 4 . On a securely switched network, with plug-in jacks for visitors who are given authentication accounts, you might want to allow out everything. In this context, a secure switch is one that tries to prevent address table overflow attacks. .Pp Example .Pa /etc/pf.conf : .Bd -literal # by default we allow internal clients to talk to us using # ssh and use us as a dns server. internal_if="fxp1" gateway_addr="10.0.1.1" nat-anchor "authpf/*" rdr-anchor "authpf/*" binat-anchor "authpf/*" block in on $internal_if from any to any pass in quick on $internal_if proto tcp from any to $gateway_addr \e port = ssh pass in quick on $internal_if proto udp from any to $gateway_addr \e port = domain anchor "authpf/*" .Ed .Pp .Sy For a switched, wired net \- This example .Pa /etc/authpf/authpf.rules makes no real restrictions; it turns the IP address on and off, logging TCP connections. .Bd -literal external_if = "xl0" internal_if = "fxp0" pass in log quick on $internal_if proto tcp from $user_ip to any pass in quick on $internal_if from $user_ip to any .Ed .Pp .Sy For a wireless or shared net \- This example .Pa /etc/authpf/authpf.rules could be used for an insecure network (such as a public wireless network) where we might need to be a bit more restrictive. .Bd -literal internal_if="fxp1" ipsec_gw="10.2.3.4" # rdr ftp for proxying by ftp-proxy(8) rdr on $internal_if proto tcp from $user_ip to any port 21 \e -> 127.0.0.1 port 8021 # allow out ftp, ssh, www and https only, and allow user to negotiate # ipsec with the ipsec server. pass in log quick on $internal_if proto tcp from $user_ip to any \e port { 21, 22, 80, 443 } pass in quick on $internal_if proto tcp from $user_ip to any \e port { 21, 22, 80, 443 } pass in quick proto udp from $user_ip to $ipsec_gw port = isakmp pass in quick proto esp from $user_ip to $ipsec_gw .Ed .Pp .Sy Dealing with NAT \- The following .Pa /etc/authpf/authpf.rules shows how to deal with NAT, using tags: .Bd -literal ext_if = "fxp1" ext_addr = 129.128.11.10 int_if = "fxp0" # nat and tag connections... nat on $ext_if from $user_ip to any tag $user_ip -> $ext_addr pass in quick on $int_if from $user_ip to any pass out log quick on $ext_if tagged $user_ip .Ed .Pp With the above rules added by .Nm , outbound connections corresponding to each users NAT'ed connections will be logged as in the example below, where the user may be identified from the ruleset name. .Bd -literal # tcpdump -n -e -ttt -i pflog0 Oct 31 19:42:30.296553 rule 0.bbeck(20267).1/0(match): pass out on fxp1: \e 129.128.11.10.60539 > 198.137.240.92.22: S 2131494121:2131494121(0) win \e 16384 (DF) .Ed .Pp .Sy Using the authpf_users table \- Simple .Nm settings can be implemented without an anchor by just using the "authpf_users" .Pa table . For example, the following .Xr pf.conf 5 lines will give SMTP and IMAP access to logged in users: .Bd -literal table persist pass in on $ext_if proto tcp from \e to port { smtp imap } .Ed .Pp It is also possible to use the "authpf_users" .Pa table in combination with anchors. For example, .Xr pf 4 processing can be sped up by looking up the anchor only for packets coming from logged in users: .Bd -literal table persist anchor "authpf/*" from rdr-anchor "authpf/*" from .Ed .Sh FILES .Bl -tag -width "/etc/authpf/authpf.conf" -compact .It Pa /etc/authpf/authpf.conf .It Pa /etc/authpf/authpf.allow .It Pa /etc/authpf/authpf.rules .It Pa /etc/authpf/authpf.message .It Pa /etc/authpf/authpf.problem .El .Sh SEE ALSO .Xr pf 4 , .Xr pf.conf 5 , .Xr securelevel 7 , .Xr ftp-proxy 8 .Sh HISTORY The .Nm program first appeared in .Ox 3.1 . .Sh BUGS Configuration issues are tricky. The authenticating .Xr ssh 1 connection may be secured, but if the network is not secured the user may expose insecure protocols to attackers on the same network, or enable other attackers on the network to pretend to be the user by spoofing their IP address. .Pp .Nm is not designed to prevent users from denying service to other users.