.\" $OpenBSD: bgpctl.8,v 1.93 2019/10/19 11:40:26 claudio Exp $ .\" .\" Copyright (c) 2003 Henning Brauer .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: October 19 2019 $ .Dt BGPCTL 8 .Os .Sh NAME .Nm bgpctl .Nd control the Border Gateway Protocol daemon .Sh SYNOPSIS .Nm bgpctl .Op Fl n .Op Fl s Ar socket .Ar command .Op Ar argument ... .Sh DESCRIPTION The .Nm program controls the .Xr bgpd 8 daemon. Commands may be abbreviated to the minimum unambiguous prefix; for example, .Cm s s for .Cm show summary . .Pp The options are as follows: .Bl -tag -width Ds .It Fl n Show neighbors' IP addresses instead of their description. .It Fl s Ar socket Use .Ar socket to communicate with .Xr bgpd 8 instead of the default .Pa /var/run/bgpd.sock. where .Ar is the routing domain .Nm is running in. To administer .Xr bgpd 8 in a different routing domain, run .Nm in said routing domain. .El .Pp The commands are as follows: .Bl -tag -width xxxxxx .It Xo .Cm fib .Op Cm table Ar number .Cm couple .Xc Insert the learned routes into the specified Forwarding Information Base a.k.a. the kernel routing table. .It Xo .Cm fib .Op Cm table Ar number .Cm decouple .Xc Remove the learned routes from the specified Forwarding Information Base a.k.a. the kernel routing table. .It Cm log brief Disable verbose debug logging. .It Cm log verbose Enable verbose debug logging. .It Cm neighbor Ar peer Cm clear Op Ar reason Stop and restart the BGP session to the specified neighbor. If a .Ar reason is provided, the .Ar reason is sent as Administrative Shutdown Communication to the neighbor. .Ar peer may be the neighbor's address, description or the word .Cm group followed by a group description. .It Cm neighbor Ar peer Cm destroy Destroy a previously cloned peer. The peer must be down before calling this function. .Ar peer may be the neighbor's address, description or the word .Cm group followed by a group description. .It Cm neighbor Ar peer Cm down Op Ar reason Take the BGP session to the specified neighbor down. If a .Ar reason is provided, the .Ar reason is sent as Administrative Shutdown Communication to the neighbor. .Ar peer may be the neighbor's address, description or the word .Cm group followed by a group description. .It Cm neighbor Ar peer Cm refresh Request the neighbor to re-send all routes. Note that the neighbor is not obliged to re-send all routes, or any routes at all, even if it announced the route refresh capability. .Ar peer may be the neighbor's address, description or the word .Cm group followed by a group description. .It Cm neighbor Ar peer Cm up Bring the BGP session to the specified neighbor up. .Ar peer may be the neighbor's address, description or the word .Cm group followed by a group description. .It Cm network add Ar prefix Op Ar arguments Add the specified prefix to the list of announced networks. It is possible to set various path attributes with additional .Ar arguments . Adding a prefix will replace an existing equal prefix, including prefixes loaded from the configuration. .It Xo .Cm network bulk .Op Ar arguments .Op Cm add .Xc Bulk add specified prefixes to the list of announced networks. Prefixes should be sent via stdin. It is possible to set various path attributes with additional .Ar arguments . If neither .Cm add or .Cm delete is given, .Cm add is the default. .It Cm network bulk delete Bulk remove the specified prefixes from the list of announced networks. Prefixes should be sent via stdin. .It Cm network delete Ar prefix Remove the specified prefix from the list of announced networks. .It Cm network flush Remove all dynamically (i.e. with .Nm Cm network add ) added prefixes from the list of announced networks. .It Cm network mrt file Ar file filter Import networks from an MRT table dump for debugging purposes. .Ar filter can be specified similarly to the .Ar show mrt command. Only networks matching the filter will be imported. .It Cm network show Ar family Show all announced networks. .Ar family , if given, limits the output to the given address family. The supported families are .Em inet and .Em inet6 . .It Cm reload Reload the configuration file. Changes to the following neighbor options in .Xr bgpd.conf 5 only take effect when the session is reset: .Ic ipsec , .Ic tcp md5sig , and .Ic export Op none | default-route . .It Cm show fib Ar filter Show routes from .Xr bgpd 8 Ns 's view of the Forwarding Information Base. .Ar filter can be an IP address, in which case the route to this address is shown, or a flag: .Pp .Bl -tag -width tableXnumber -compact .It Cm connected Show only connected routes. .It Cm static Show only static routes. .It Cm bgp Show only routes originating from .Xr bgpd 8 itself. .It Cm nexthop Show only routes required to reach a BGP nexthop. .It Cm inet Show only IPv4 routes. .It Cm inet6 Show only IPv6 routes. .It Cm table Ar number Show the routing table with ID .Ar number instead of the default routing table with ID 0. .El .It Cm show interfaces Show the interface states. .It Xo .Cm show mrt .Op Ar options .Ar filter .Xc Show routes from an MRT table dump file. .Ar filter can be an IP address, a CIDR prefix, an AS filter, a combination or nothing: .Pp .Bl -tag -width "address/len or-shorter" -compact .It Ar address Show best matching route for address. .It Ar address Ns Li / Ns Ar len Show RIB entry for this CIDR prefix. .It Xo .Ar address Ns Li / Ns Ar len .Cm all .Xc Show all entries in the specified range. .\".It Ar address/len Cm longer-prefixes .It Xo .Ar address Ns Li / Ns Ar len .Cm or-shorter .Xc Show all entries covering and including the specified prefix. .It Cm as Ar as Show all entries with .Ar as anywhere in the AS path. .It Cm empty-as Show all entries that are internal routes with no AS's in the AS path. .It Cm neighbor Ar ip Show only entries from the specified peer. .It Cm peer-as Ar as Show all entries with .Ar as as leftmost AS. .It Cm source-as Ar as Show all entries with .Ar as as rightmost AS. .It Cm transit-as Ar as Show all entries with .Ar as anywhere but rightmost. .El .Pp Additionally, the following .Ar options are defined: .Pp .Bl -tag -width "file name" -compact .It Cm detail Show more detailed output for matching routes. .It Ar family Limit the output to the given address family. .It Cm file Ar name Read the MRT dump from file .It Cm peers Print the neighbor table of MRT TABLE_DUMP_V2 dumps. Using this on other table dumps will only show the neighbor of the first entry. .Ar name instead of using stdin. .El .Pp Multiple options and filters can be used at the same time. .It Cm show neighbor Ar peer modifier Show detailed information about the neighbor identified by .Ar peer , according to the given .Ar modifier : .Pp .Bl -tag -width messages -compact .It Cm messages Show statistics about sent and received BGP messages. .It Cm terse Show statistics in an easily parseable terse format. The printed numbers are the sent and received open, sent and received notifications, sent and received updates, sent and received keepalives, and sent and received route refresh messages plus the current and maximum prefix count, the number of sent and received updates, sent and received withdraws, the neighbor's address (or subnet, for a template), AS number, and finally description. .It Cm timers Show the BGP timers. .El .Ar peer may be the neighbor's address, description or the word .Cm group followed by a group description. .It Cm show nexthop Show the list of BGP nexthops and the result of their validity check. .It Xo .Cm show rib .Op Ar options .Ar filter .Xc Show routes from the .Xr bgpd 8 Routing Information Base. .Ar filter can be an IP address, a CIDR prefix, an AS filter or nothing: .Pp .Bl -tag -width "address/len or-shorter" -compact .It Ar address Show best matching route for address. .It Ar address Ns Li / Ns Ar len Show RIB entry for this CIDR prefix. .It Xo .Ar address Ns Li / Ns Ar len .Cm all .Xc Show all entries in the specified range. .\".It Ar address/len Cm longer-prefixes .It Xo .Ar address Ns Li / Ns Ar len .Cm or-shorter .Xc Show all entries covering and including the specified prefix. .It Cm as Ar as Show all entries with .Ar as anywhere in the AS path. .It Cm community Ar community Show all entries with community .Ar community . .It Cm large-community Ar large-community Show all entries with large-community .Ar large-community . .It Cm empty-as Show all entries that are internal routes with no AS's in the AS path. .It Cm memory Show RIB memory statistics. .It Cm neighbor Ar peer Show only entries from the specified peer. .It Cm neighbor group Ar description Show only entries from the specified peer group. .It Cm peer-as Ar as Show all entries with .Ar as as leftmost AS. .It Cm source-as Ar as Show all entries with .Ar as as rightmost AS. .It Cm summary This is the same as the .Ic show summary command. .It Cm table Ar rib Show only entries from the specified RIB table. .It Cm transit-as Ar as Show all entries with .Ar as anywhere but rightmost. .It Cm ovs Pq Ic valid | not-found | invalid Show all entries with matching Origin Validation State (OVS). .El .Pp Additionally, the following .Ar options are defined: .Pp .Bl -tag -width "selected" -compact .It Cm best Alias for .Ic selected . .It Cm error Show only prefixes which are marked invalid and were treated as withdrawn. .It Cm selected Show only selected routes. .It Cm ssv Show each RIB entry as a single line, with fields separated by semicolons. Only works if .Cm detail is specified. .It Cm detail Show more detailed output for matching routes. .It Ar family Limit the output to the given address family. .It Cm in Show routes from the unfiltered Adj-RIB-In. The .Cm neighbor needs to be specified. .It Cm out Show the filtered routes sent to a neighbor. The .Cm neighbor needs to be specified. .El .Pp Options are silently ignored when used together with .Ar summary or .Ar memory . Multiple options can be used at the same time and the .Ar neighbor filter can be combined with other filters. .It Cm show summary Show a list of all neighbors, including information about the session state and message counters: .Pp .Bl -tag -width xxxxxxxxxxxxxx -compact .It Neighbor Description of the neighbor. .It AS Autonomous system number. .It MsgRcvd Number of messages received from the neighbor. .It MsgSent Number of messages sent to the neighbor. .It OutQ Number of outgoing messages queued. .It Up/Down Number of days and hours that the session has been up. .It State/PrfRcvd State of the session / Number of routes received. The session is up if there is no information for the State column (Established is not displayed). .El .It Cm show summary terse Show a list of all neighbors, including information about the session state, in a terse format. .It Cm show tables Show a list of all currently loaded fib routing tables. .El .Sh FILES .Bl -tag -width "/var/run/bgpd.sockXXX" -compact .It Pa /etc/bgpd.conf default .Xr bgpd 8 configuration file .It Pa /var/run/bgpd.sock default .Xr bgpd 8 control socket .El .Sh SEE ALSO .Xr bgpd.conf 5 , .Xr bgpd 8 , .Xr bgplg 8 , .Xr bgplgsh 8 .Sh STANDARDS .Rs .%A C. Alaettinoglu .%A C. Villamizar .%A E. Gerich .%A D. Kessens .%A D. Meyer .%A T. Bates .%A D. Karrenberg .%A M. Terpstra .%D June 1999 .%R RFC 2622 .%T Routing Policy Specification Language (RPSL) .Re .Sh HISTORY The .Nm program first appeared in .Ox 3.5 .