/* $OpenBSD: mrt.h,v 1.26 2010/04/22 08:24:58 claudio Exp $ */ /* * Copyright (c) 2003, 2004 Claudio Jeker * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef __MRT_H__ #define __MRT_H__ /* * MRT binary packet format * For more info see: * draft-ietf-grow-mrt-04.txt, "MRT routing information export format" * http://www.quagga.net/docs/docs-multi/Packet-Binary-Dump-Format.html */ /* * MRT header: * +--------+--------+--------+--------+ * | timestamp | * +--------+--------+--------+--------+ * | type | subtype | * +--------+--------+--------+--------+ * | length | length of packet excluding this header * +--------+--------+--------+--------+ * * ET types include an additional 32bit microsecond field comming after the * length field. */ #define MRT_HEADER_SIZE 12 enum MRT_MSG_TYPES { MSG_NULL, /* 0 empty msg (deprecated) */ MSG_START, /* 1 sender is starting up */ MSG_DIE, /* 2 receiver should shut down (deprecated) */ MSG_I_AM_DEAD, /* 3 sender is shutting down */ MSG_PEER_DOWN, /* 4 sender's peer is down (deprecated) */ MSG_PROTOCOL_BGP, /* 5 msg is a BGP packet (deprecated) */ MSG_PROTOCOL_RIP, /* 6 msg is a RIP packet */ MSG_PROTOCOL_IDRP, /* 7 msg is an IDRP packet (deprecated) */ MSG_PROTOCOL_RIPNG, /* 8 msg is a RIPNG packet */ MSG_PROTOCOL_BGP4PLUS, /* 9 msg is a BGP4+ packet (deprecated) */ MSG_PROTOCOL_BGP4PLUS1, /* 10 msg is a BGP4+ (draft 01) (deprecated) */ MSG_PROTOCOL_OSPF, /* 11 msg is an OSPF packet */ MSG_TABLE_DUMP, /* 12 routing table dump */ MSG_TABLE_DUMP_V2, /* 13 routing table dump */ MSG_PROTOCOL_BGP4MP=16, /* 16 zebras own packet format */ MSG_PROTOCOL_BGP4MP_ET=17, MSG_PROTOCOL_ISIS=32, /* 32 msg is a ISIS package */ MSG_PROTOCOL_ISIS_ET=33, MSG_PROTOCOL_OSPFV3=48, /* 48 msg is a OSPFv3 package */ MSG_PROTOCOL_OSPFV3_ET=49 }; /* * Main zebra dump format is in MSG_PROTOCOL_BGP4MP exceptions are table dumps * that are normaly saved as MSG_TABLE_DUMP. * In most cases this is the format to choose to dump updates et al. */ enum MRT_BGP4MP_TYPES { BGP4MP_STATE_CHANGE, /* state change */ BGP4MP_MESSAGE, /* bgp message */ BGP4MP_ENTRY, /* table dumps (deprecated) */ BGP4MP_SNAPSHOT, /* file name for dump (deprecated) */ BGP4MP_MESSAGE_AS4, /* same as BGP4MP_MESSAGE with 4byte AS */ BGP4MP_STATE_CHANGE_AS4, BGP4MP_MESSAGE_LOCAL, /* same as BGP4MP_MESSAGE but for self */ BGP4MP_MESSAGE_AS4_LOCAL /* originated updates. Not implemented */ }; /* size of the BGP4MP headers without payload */ #define MRT_BGP4MP_IPv4_HEADER_SIZE 16 #define MRT_BGP4MP_IPv6_HEADER_SIZE 40 /* 4-byte AS variants of the previous */ #define MRT_BGP4MP_AS4_IPv4_HEADER_SIZE 20 #define MRT_BGP4MP_AS4_IPv6_HEADER_SIZE 44 /* If the type is PROTOCOL_BGP4MP and the subtype is either BGP4MP_STATE_CHANGE * or BGP4MP_MESSAGE the message consists of a common header plus the payload. * Header format: * * +--------+--------+--------+--------+ * | source_as | dest_as | * +--------+--------+--------+--------+ * | if_index | afi | * +--------+--------+--------+--------+ * | source_ip | * +--------+--------+--------+--------+ * | dest_ip | * +--------+--------+--------+--------+ * | message specific payload ... * +--------+--------+--------+--------+ * * The source_ip and dest_ip are dependant of the afi type. For IPv6 source_ip * and dest_ip are both 16 bytes long. * * Payload of a BGP4MP_STATE_CHANGE packet: * * +--------+--------+--------+--------+ * | old_state | new_state | * +--------+--------+--------+--------+ * * The state values are the same as in RFC 1771. * * The payload of a BGP4MP_MESSAGE is the full bgp message with header. */ /* * size of the BGP4MP entries without variable stuff. * All until nexthop plus attr_len, not included plen, prefix and bgp attrs. */ #define MRT_BGP4MP_IPv4_ENTRY_SIZE 18 #define MRT_BGP4MP_IPv6_ENTRY_SIZE 30 #define MRT_BGP4MP_MAX_PREFIXLEN 17 /* * The "new" table dump format consists of messages of type PROTOCOL_BGP4MP * and subtype BGP4MP_ENTRY. * * +--------+--------+--------+--------+ * | view | status | * +--------+--------+--------+--------+ * | originated | * +--------+--------+--------+--------+ * | afi | safi | nhlen | * +--------+--------+--------+--------+ * | nexthop | * +--------+--------+--------+--------+ * | plen | prefix variable ... | * +--------+--------+--------+--------+ * | attr_len | bgp attributes * +--------+--------+--------+--------+ * bgp attributes, attr_len bytes long * +--------+--------+--------+--------+ * ... | * +--------+--------+--------+ * * View is normaly 0 and originated the time of last change. * The status seems to be 1 by default but probably something to indicate * the status of a prefix would be more useful. * The format of the nexthop address is defined via the afi value. For IPv6 * the nexthop field is 16 bytes long. * The prefix field is as in the bgp update message variable length. It is * plen bits long but rounded to the next octet. */ /* * Format for routing table dumps in "old" mrt format. * Type MSG_TABLE_DUMP and subtype is AFI_IPv4 (1) for IPv4 and AFI_IPv6 (2) * for IPv6. In the IPv6 case prefix and peer_ip are both 16 bytes long. * * +--------+--------+--------+--------+ * | view | seqnum | * +--------+--------+--------+--------+ * | prefix | * +--------+--------+--------+--------+ * | plen | status | originated time * +--------+--------+--------+--------+ * originated time | peer_ip * +--------+--------+--------+--------+ * peer_ip | peer_as | * +--------+--------+--------+--------+ * | attr_len | bgp attributes * +--------+--------+--------+--------+ * bgp attributes, attr_len bytes long * +--------+--------+--------+--------+ * ... | * +--------+--------+--------+ * * * View is normaly 0 and seqnum just a simple counter for this dump. * The status field is unused and should be set to 1. */ /* size of the dump header until attr_len */ #define MRT_DUMP_HEADER_SIZE 22 /* * OLD MRT message headers. These structs are here for completion but * will not be used to generate dumps. It seems that nobody uses those. * * Only for bgp messages (type 5, 9 and 10) * Nota bene for bgp dumps MSG_PROTOCOL_BGP4MP should be used. */ enum MRT_BGP_TYPES { MSG_BGP_NULL, MSG_BGP_UPDATE, /* raw update packet (contains both withdraws and announcements) */ MSG_BGP_PREF_UPDATE, /* tlv preferences followed by raw update */ MSG_BGP_STATE_CHANGE, /* state change */ MSG_BGP_SYNC, /* file name for a table dump */ MSG_BGP_OPEN, /* BGP open messages */ MSG_BGP_NOTIFY, /* BGP notify messages */ MSG_BGP_KEEPALIVE /* BGP keepalives */ }; /* if type MSG_PROTOCOL_BGP and subtype MSG_BGP_UPDATE, MSG_BGP_OPEN, * MSG_BGP_NOTIFY or MSG_BGP_KEEPALIVE * * +--------+--------+--------+--------+ * | source_as | source_ip * +--------+--------+--------+--------+ * source_ip | dest_as | * +--------+--------+--------+--------+ * | dest_ip | * +--------+--------+--------+--------+ * | bgp update packet with header et * +--------+--------+--------+--------+ * al. (variable length) ... * +--------+--------+--------+--------+ * * For IPv6 the type is MSG_PROTOCOL_BGP4PLUS and the subtype remains * MSG_BGP_UPDATE. The source_ip and dest_ip are again extended to 16 bytes. */ /* * For subtype MSG_BGP_STATECHANGE (for all BGP types or just for the * MSG_PROTOCOL_BGP4PLUS case? Unclear.) * * +--------+--------+--------+--------+ * | source_as | source_ip * +--------+--------+--------+--------+ * source_ip | old_state | * +--------+--------+--------+--------+ * | new_state | * +--------+--------+ * * State are defined in RFC 1771. */ /* * if type MSG_PROTOCOL_BGP and subtype MSG_BGP_SYNC OR * if type MSG_PROTOCOL_BGP4MP and subtype BGP4MP_SNAPSHOT * *DEPRECATED* * * +--------+--------+--------+--------+ * | view | filename * +--------+--------+--------+--------+ * filename variable length zero * +--------+--------+--------+--------+ * terminated ... | 0 | * +--------+--------+--------+ */ #define MRT_FILE_LEN 512 enum mrt_type { MRT_NONE, MRT_TABLE_DUMP, MRT_TABLE_DUMP_MP, MRT_ALL_IN, MRT_ALL_OUT, MRT_UPDATE_IN, MRT_UPDATE_OUT }; enum mrt_state { MRT_STATE_RUNNING, MRT_STATE_OPEN, MRT_STATE_REOPEN, MRT_STATE_REMOVE }; struct mrt { char rib[PEER_DESCR_LEN]; struct msgbuf wbuf; LIST_ENTRY(mrt) entry; u_int32_t peer_id; u_int32_t group_id; enum mrt_type type; enum mrt_state state; u_int16_t seqnum; }; struct mrt_config { struct mrt conf; char name[MRT_FILE_LEN]; /* base file name */ char file[MRT_FILE_LEN]; /* actual file name */ time_t ReopenTimer; time_t ReopenTimerInterval; }; #define MRT2MC(x) ((struct mrt_config *)(x)) #define MRT_MAX_TIMEOUT 7200 struct peer; struct prefix; struct rib_entry; /* prototypes */ void mrt_dump_bgp_msg(struct mrt *, void *, u_int16_t, struct peer *); void mrt_dump_state(struct mrt *, u_int16_t, u_int16_t, struct peer *); void mrt_clear_seq(void); void mrt_dump_upcall(struct rib_entry *, void *); void mrt_done(void *); void mrt_write(struct mrt *); void mrt_clean(struct mrt *); void mrt_init(struct imsgbuf *, struct imsgbuf *); int mrt_timeout(struct mrt_head *); void mrt_reconfigure(struct mrt_head *); void mrt_handler(struct mrt_head *); struct mrt *mrt_get(struct mrt_head *, struct mrt *); int mrt_mergeconfig(struct mrt_head *, struct mrt_head *); #endif