.\" $OpenBSD: dhcpd.8,v 1.15 2007/05/31 19:20:23 jmc Exp $ .\" .\" Copyright (c) 1995, 1996 The Internet Software Consortium. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of The Internet Software Consortium nor the names .\" of its contributors may be used to endorse or promote products derived .\" from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND .\" CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, .\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE .\" DISCLAIMED. IN NO EVENT SHALL THE INTERNET SOFTWARE CONSORTIUM OR .\" CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, .\" SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT .\" LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF .\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND .\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, .\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT .\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" This software has been written for the Internet Software Consortium .\" by Ted Lemon in cooperation with Vixie .\" Enterprises. To learn more about the Internet Software Consortium, .\" see ``http://www.isc.org/''. To learn more about Vixie .\" Enterprises, see ``http://www.vix.com''. .\" .Dd $Mdocdate: May 31 2007 $ .Dt DHCPD 8 .Os .Sh NAME .Nm dhcpd .Nd Dynamic Host Configuration Protocol Server .Sh SYNOPSIS .Nm dhcpd .Bk -words .Op Fl dfn .Op Fl A Ar abandoned_ip_table .Op Fl C Ar changed_ip_table .Op Fl c Ar config-file .Op Fl L Ar leased_ip_table .Op Fl l Ar lease-file .Op Ar if0 Op Ar ... ifN .Ek .Sh DESCRIPTION The Internet Software Consortium DHCP Server, .Nm dhcpd , implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). DHCP allows hosts on a TCP/IP network to request and be assigned IP addresses, and also to discover information about the network to which they are attached. BOOTP provides similar functionality, with certain restrictions. .Pp The DHCP protocol allows a host which is unknown to the network administrator to be automatically assigned a new IP address out of a pool of IP addresses for its network. In order for this to work, the network administrator allocates address pools in each subnet and enters them into the .Xr dhcpd.conf 5 file. .Pp On startup, .Nm reads the .Pa dhcpd.conf file and stores a list of available addresses on each subnet in memory. When a client requests an address using the DHCP protocol, .Nm allocates an address for it. Each client is assigned a lease, which expires after an amount of time chosen by the administrator (by default, one day). When a leased IP address is assigned to a new hardware address, .Nm may delete the leased IP from certain .Xr pf 4 tables. Before leases expire, the clients to which leases are assigned are expected to renew them in order to continue to use the addresses. Once a lease has expired, the client to which that lease was assigned is no longer permitted to use the leased IP address. .Pp In order to keep track of leases across system reboots and server restarts, .Nm keeps a list of leases it has assigned in the .Xr dhcpd.leases 5 file. Before .Nm grants a lease to a host, it records the lease in this file and makes sure that the contents of the file are flushed to disk. This ensures that even in the event of a system crash, .Nm will not forget about a lease that it has assigned. On startup, after reading the .Pa dhcpd.conf file, .Nm reads the .Pa dhcpd.leases file to refresh its memory about what leases have been assigned. .Pp BOOTP support is also provided by this server. Unlike DHCP, the BOOTP protocol does not provide a protocol for recovering dynamically-assigned addresses once they are no longer needed. It is still possible to dynamically assign addresses to BOOTP clients, but some administrative process for reclaiming addresses is required. By default, leases are granted to BOOTP clients in perpetuity, although the network administrator may set an earlier cutoff date or a shorter lease length for BOOTP leases if that makes sense. .Pp BOOTP clients may also be served in the old standard way, which is simply to provide a declaration in the .Pa dhcpd.conf file for each BOOTP client, permanently assigning an address to each client. .Pp Whenever changes are made to the .Pa dhcpd.conf file, .Nm must be restarted. Because the DHCP server database is not as lightweight as a BOOTP database, .Nm does not automatically restart itself when it sees a change to the .Pa dhcpd.conf file. .Pp DHCP traffic always bypasses IPsec. Otherwise there could be situations when a server has an IPsec SA for the client and sends replies over that, which a newly booted client would not be able to grasp. .Sh COMMAND LINE The names of the network interfaces on which .Nm should listen for broadcasts may be specified on the command line. This should be done on systems where .Nm is unable to identify non-broadcast interfaces, but should not be required on other systems. If no interface names are specified on the command line, .Nm will identify all network interfaces which are up, eliminating non-broadcast interfaces if possible, and listen for DHCP broadcasts on each interface. .Pp The options are as follows: .Bl -tag -width Ds .It Fl A Ar abandoned_ip_table When an address is abandoned for some reason, add it to the .Xr pf 4 table named .Ar abandoned_ip_table . This can be used to defend against machines "camping" on an address without obtaining a lease. When an address is properly leased, .Nm will remove the address from this table. .It Fl C Ar changed_ip_table When an address is leased to a different hardware address, delete it from the .Xr pf 4 table named .Ar changed_ip_table . This feature complements the overload table in a stateful .Xr pf 4 rule. If a host appears to be misbehaving, it can be quarantined by using the overload feature. When the address is leased to a different machine, .Nm can remove the address from the overload table, thus allowing a well-behaved machine to reuse the address. .It Fl c Ar config-file Use an alternate configuration file, .Ar config-file . Because of the importance of using the same lease database at all times when running .Nm in production, this option should be used .Em only for testing database files in a non-production environment. .It Fl d Force .Nm to log to .Ar stderr . This can be useful for debugging, and also at sites where a complete log of all dhcp activity must be kept, but .Xr syslogd 8 is not reliable or otherwise cannot be used. Normally, .Nm will log all output using the .Xr syslog 3 function with the log facility set to .Dv LOG_DAEMON . .It Fl f Run .Nm as a foreground process, rather than allowing it to run as a daemon in the background. This is useful when running .Nm under a debugger, or when running it out of inittab on System V systems. .It Fl L Ar leased_ip_table When an address is leased .Nm will insert it into the .Xr pf 4 table named .Ar leased_ip_table . Addresses are removed from the table when the lease expires. Combined with the table of abandoned addresses, this can help enforce a requirement to use DHCP on a network, or can place DHCP users in a different class of service. Users are cautioned against placing much trust in Ethernet or IP addresses; .Xr ifconfig 8 can be used to trivially change the interface's address, and on a busy DHCP network, IP addresses will likely be quickly recycled. .It Fl l Ar lease-file Use an alternate lease file, .Ar lease-file . Because of the importance of using the same lease database at all times when running .Nm in production, this option should be used .Em only for testing lease files in a non-production environment. .It Fl n Only test configuration, do not run .Nm . .El .Sh CONFIGURATION The syntax of the .Xr dhcpd.conf 5 file is discussed separately. This section should be used as an overview of the configuration process, and the .Xr dhcpd.conf 5 documentation should be consulted for detailed reference information. .Bl -tag -width 3n .It Subnets .Nm needs to know the subnet numbers and netmasks of all subnets for which it will be providing service. In addition, in order to dynamically allocate addresses, it must be assigned one or more ranges of addresses on each subnet which it can in turn assign to client hosts as they boot. Thus, a very simple configuration providing DHCP support might look like this: .Bd -literal -offset indent subnet 239.252.197.0 netmask 255.255.255.0 { range 239.252.197.10 239.252.197.250; } .Ed .Pp Multiple address ranges may be specified like this: .Bd -literal -offset indent subnet 239.252.197.0 netmask 255.255.255.0 { range 239.252.197.10 239.252.197.107; range 239.252.197.113 239.252.197.250; } .Ed .Pp If a subnet will only be provided with BOOTP service and no dynamic address assignment, the range clause can be left out entirely, but the subnet statement must appear. .It Lease Lengths DHCP leases can be assigned almost any length from zero seconds to infinity. What lease length makes sense for any given subnet, or for any given installation, will vary depending on the kinds of hosts being served. .Pp For example, in an office environment where systems are added from time to time and removed from time to time, but move relatively infrequently, it might make sense to allow lease times of a month of more. In a final test environment on a manufacturing floor, it may make more sense to assign a maximum lease length of 30 minutes \- enough time to go through a simple test procedure on a network appliance before packaging it up for delivery. .Pp It is possible to specify two lease lengths: the default length that will be assigned if a client doesn't ask for any particular lease length, and a maximum lease length. These are specified as clauses to the subnet command: .Bd -literal -offset indent subnet 239.252.197.0 netmask 255.255.255.0 { range 239.252.197.10 239.252.197.107; default-lease-time 600; max-lease-time 7200; } .Ed .Pp This particular subnet declaration specifies a default lease time of 600 seconds (ten minutes), and a maximum lease time of 7200 seconds (two hours). Other common values would be 86400 (one day), 604800 (one week) and 2592000 (30 days). .Pp Each subnet need not have the same lease \- in the case of an office environment and a manufacturing environment served by the same DHCP server, it might make sense to have widely disparate values for default and maximum lease times on each subnet. .It BOOTP Support Each BOOTP client must be explicitly declared in the .Xr dhcpd.conf 5 file. A very basic client declaration will specify the client network interface's hardware address and the IP address to assign to that client. If the client needs to be able to load a boot file from the server, that file's name must be specified. A simple BOOTP client declaration might look like this: .Bd -literal -offset indent host haagen { hardware ethernet 08:00:2b:4c:59:23; fixed-address 239.252.197.9; filename "haagen.boot"; } .Ed .It Options DHCP (and also BOOTP with Vendor Extensions) provides a mechanism whereby the server can provide the client with information about how to configure its network interface (e.g., subnet mask), and also how the client can access various network services (e.g., DNS, IP routers, and so on). .Pp These options can be specified on a per-subnet basis, and, for BOOTP clients, also on a per-client basis. In the event that a BOOTP client declaration specifies options that are also specified in its subnet declaration, the options specified in the client declaration take precedence. A reasonably complete DHCP configuration might look something like this: .Bd -literal -offset indent subnet 239.252.197.0 netmask 255.255.255.0 { range 239.252.197.10 239.252.197.250; default-lease-time 600; max-lease-time 7200; option subnet-mask 255.255.255.0; option broadcast-address 239.252.197.255; option routers 239.252.197.1; option domain-name-servers 239.252.197.2, 239.252.197.3; option domain-name "isc.org"; } .Ed .Pp A BOOTP host on that subnet that needs to be in a different domain and use a different name server might be declared as follows: .Bd -literal -offset indent host haagen { hardware ethernet 08:00:2b:4c:59:23; fixed-address 239.252.197.9; filename "haagen.boot"; option domain-name-servers 192.5.5.1; option domain-name "vix.com"; } .Ed .El .Pp A more complete description of the .Pa dhcpd.conf file syntax is provided in .Xr dhcpd.conf 5 . .Sh FILES .Bl -tag -width "/var/db/dhcpd.leases~ " -compact .It /etc/dhcpd.conf DHCPD configuration file. .It /var/db/dhcpd.leases DHCPD lease file. .El .Sh SEE ALSO .Xr pf 4 , .Xr dhcpd.conf 5 , .Xr dhcpd.leases 5 , .Xr dhclient 8 , .Xr dhcp 8 , .Xr dhcrelay 8 , .Xr pxeboot 8 .Sh AUTHORS .An -nosplit .Nm was written by .An Ted Lemon Aq mellon@vix.com under a contract with Vixie Labs. .Pp The current implementation was reworked by .An Henning Brauer Aq henning@openbsd.org . .Sh BUGS We realize that it would be nice if one could send a .Dv SIGHUP to the server and have it reload the database. This is not technically impossible, but it would require a great deal of work, our resources are extremely limited, and they can be better spent elsewhere. So please don't complain about this on the mailing list unless you're prepared to fund a project to implement this feature, or prepared to do it yourself.