/*	$OpenBSD: parse.c,v 1.6 2004/05/04 20:28:40 deraadt Exp $	*/

/* Common parser code for dhcpd and dhclient. */

/*
 * Copyright (c) 1995, 1996, 1997, 1998 The Internet Software Consortium.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of The Internet Software Consortium nor the names
 *    of its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND
 * CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL THE INTERNET SOFTWARE CONSORTIUM OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This software has been written for the Internet Software Consortium
 * by Ted Lemon <mellon@fugue.com> in cooperation with Vixie
 * Enterprises.  To learn more about the Internet Software Consortium,
 * see ``http://www.vix.com/isc''.  To learn more about Vixie
 * Enterprises, see ``http://www.vix.com''.
 */

#include "dhcpd.h"
#include "dhctoken.h"

/*
 * Skip to the semicolon ending the current statement.   If we encounter
 * braces, the matching closing brace terminates the statement.   If we
 * encounter a right brace but haven't encountered a left brace, return
 * leaving the brace in the token buffer for the caller.   If we see a
 * semicolon and haven't seen a left brace, return.   This lets us skip
 * over:
 *
 *	statement;
 *	statement foo bar { }
 *	statement foo bar { statement { } }
 *	statement}
 *
 *	...et cetera.
 */
void
skip_to_semi(FILE *cfile)
{
	int		 token;
	char		*val;
	int		 brace_count = 0;

	do {
		token = peek_token(&val, cfile);
		if (token == RBRACE) {
			if (brace_count) {
				token = next_token(&val, cfile);
				if (!--brace_count)
					return;
			} else
				return;
		} else if (token == LBRACE) {
			brace_count++;
		} else if (token == SEMI && !brace_count) {
			token = next_token(&val, cfile);
			return;
		} else if (token == '\n') {
			/*
			 * EOL only happens when parsing
			 * /etc/resolv.conf, and we treat it like a
			 * semicolon because the resolv.conf file is
			 * line-oriented.
			 */
			token = next_token(&val, cfile);
			return;
		}
		token = next_token(&val, cfile);
	} while (token != EOF);
}

int
parse_semi(FILE *cfile)
{
	int token;
	char *val;

	token = next_token(&val, cfile);
	if (token != SEMI) {
		parse_warn("semicolon expected.");
		skip_to_semi(cfile);
		return (0);
	}
	return (1);
}

/*
 * string-parameter :== STRING SEMI
 */
char *
parse_string(FILE *cfile)
{
	char *val, *s;
	int token;

	token = next_token(&val, cfile);
	if (token != STRING) {
		parse_warn("filename must be a string");
		skip_to_semi(cfile);
		return (NULL);
	}
	s = malloc(strlen(val) + 1);
	if (!s)
		error("no memory for string %s.", val);
	strlcpy(s, val, strlen(val) + 1);

	if (!parse_semi(cfile))
		return (NULL);
	return (s);
}

/*
 * hostname :== identifier | hostname DOT identifier
 */
char *
parse_host_name(FILE *cfile)
{
	char *val, *s, *t;
	int token, len = 0;
	pair c = NULL;

	/* Read a dotted hostname... */
	do {
		/* Read a token, which should be an identifier. */
		token = next_token(&val, cfile);
		if (!is_identifier(token) && token != NUMBER) {
			parse_warn("expecting an identifier in hostname");
			skip_to_semi(cfile);
			return (NULL);
		}
		/* Store this identifier... */
		if (!(s = malloc(strlen(val) + 1)))
			error("can't allocate temp space for hostname.");
		strlcpy(s, val, strlen(val) + 1);
		c = cons((caddr_t) s, c);
		len += strlen(s) + 1;
		/*
		 * Look for a dot; if it's there, keep going, otherwise
		 * we're done.
		 */
		token = peek_token(&val, cfile);
		if (token == DOT)
			token = next_token(&val, cfile);
	} while (token == DOT);

	/* Assemble the hostname together into a string. */
	if (!(s = malloc(len)))
		error("can't allocate space for hostname.");
	t = s + len;
	*--t = '\0';
	while (c) {
		pair cdr = c->cdr;
		int l = strlen((char *)c->car);

		t -= l;
		memcpy(t, (char *)c->car, l);
		/* Free up temp space. */
		free(c->car);
		free(c);
		c = cdr;
		if (t != s)
			*--t = '.';
	}
	return (s);
}

/*
 * hardware-parameter :== HARDWARE ETHERNET csns SEMI
 * csns :== NUMBER | csns COLON NUMBER
 */
void
parse_hardware_param(FILE *cfile, struct hardware *hardware)
{
	char *val;
	int token, hlen;
	unsigned char *t;

	token = next_token(&val, cfile);
	switch (token) {
	case ETHERNET:
		hardware->htype = HTYPE_ETHER;
		break;
	case TOKEN_RING:
		hardware->htype = HTYPE_IEEE802;
		break;
	case FDDI:
		hardware->htype = HTYPE_FDDI;
		break;
	default:
		parse_warn("expecting a network hardware type");
		skip_to_semi(cfile);
		return;
	}

	/*
	 * Parse the hardware address information.   Technically, it
	 * would make a lot of sense to restrict the length of the data
	 * we'll accept here to the length of a particular hardware
	 * address type.   Unfortunately, there are some broken clients
	 * out there that put bogus data in the chaddr buffer, and we
	 * accept that data in the lease file rather than simply failing
	 * on such clients.   Yuck.
	 */
	hlen = 0;
	t = parse_numeric_aggregate(cfile, NULL, &hlen, COLON, 16, 8);
	if (!t)
		return;
	if (hlen > sizeof(hardware->haddr)) {
		free(t);
		parse_warn("hardware address too long");
	} else {
		hardware->hlen = hlen;
		memcpy((unsigned char *)&hardware->haddr[0], t, hardware->hlen);
		if (hlen < sizeof(hardware->haddr))
			memset(&hardware->haddr[hlen], 0,
			    sizeof(hardware->haddr) - hlen);
		free(t);
	}

	token = next_token(&val, cfile);
	if (token != SEMI) {
		parse_warn("expecting semicolon.");
		skip_to_semi(cfile);
	}
}

/*
 * lease-time :== NUMBER SEMI
 */
void
parse_lease_time(FILE *cfile, time_t *timep)
{
	char *val;
	int token;

	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("Expecting numeric lease time");
		skip_to_semi(cfile);
		return;
	}
	convert_num((unsigned char *)timep, val, 10, 32);
	/* Unswap the number - convert_num returns stuff in NBO. */
	*timep = ntohl(*timep);	/* XXX */

	parse_semi(cfile);
}

/*
 * No BNF for numeric aggregates - that's defined by the caller.  What
 * this function does is to parse a sequence of numbers separated by the
 * token specified in separator.  If max is zero, any number of numbers
 * will be parsed; otherwise, exactly max numbers are expected.  Base
 * and size tell us how to internalize the numbers once they've been
 * tokenized.
 */
unsigned char *
parse_numeric_aggregate(FILE *cfile, unsigned char *buf, int *max,
    int separator, int base, int size)
{
	char *val, *t;
	int token, count = 0;
	unsigned char *bufp = buf, *s = NULL;
	pair c = NULL;

	if (!bufp && *max) {
		bufp = malloc(*max * size / 8);
		if (!bufp)
			error("can't allocate space for numeric aggregate");
	} else
		s = bufp;

	do {
		if (count) {
			token = peek_token(&val, cfile);
			if (token != separator) {
				if (!*max)
					break;
				if (token != RBRACE && token != LBRACE)
					token = next_token(&val, cfile);
				parse_warn("too few numbers.");
				if (token != SEMI)
					skip_to_semi(cfile);
				return (NULL);
			}
			token = next_token(&val, cfile);
		}
		token = next_token(&val, cfile);

		if (token == EOF) {
			parse_warn("unexpected end of file");
			break;
		}
		/* Allow NUMBER_OR_NAME if base is 16. */
		if (token != NUMBER &&
		    (base != 16 || token != NUMBER_OR_NAME)) {
			parse_warn("expecting numeric value.");
			skip_to_semi(cfile);
			return (NULL);
		}
		/*
		 * If we can, convert the number now; otherwise, build a
		 * linked list of all the numbers.
		 */
		if (s) {
			convert_num(s, val, base, size);
			s += size / 8;
		} else {
			t = malloc(strlen(val) + 1);
			if (!t)
				error("no temp space for number.");
			strlcpy(t, val, strlen(val) + 1);
			c = cons(t, c);
		}
	} while (++count != *max);

	/* If we had to cons up a list, convert it now. */
	if (c) {
		bufp = malloc(count * size / 8);
		if (!bufp)
			error("can't allocate space for numeric aggregate.");
		s = bufp + count - size / 8;
		*max = count;
	}
	while (c) {
		pair		cdr = c->cdr;
		convert_num(s, (char *)c->car, base, size);
		s -= size / 8;
		/* Free up temp space. */
		free(c->car);
		free(c);
		c = cdr;
	}
	return (bufp);
}

void
convert_num(unsigned char *buf, char *str, int base, int size)
{
	int negative = 0, tval, max;
	char *ptr = str;
	u_int32_t val = 0;

	if (*ptr == '-') {
		negative = 1;
		ptr++;
	}
	/* If base wasn't specified, figure it out from the data. */
	if (!base) {
		if (ptr[0] == '0') {
			if (ptr[1] == 'x') {
				base = 16;
				ptr += 2;
			} else if (isascii(ptr[1]) && isdigit(ptr[1])) {
				base = 8;
				ptr += 1;
			} else
				base = 10;
		} else
			base = 10;
	}
	do {
		tval = *ptr++;
		/* XXX assumes ASCII... */
		if (tval >= 'a')
			tval = tval - 'a' + 10;
		else if (tval >= 'A')
			tval = tval - 'A' + 10;
		else if (tval >= '0')
			tval -= '0';
		else {
			warn("Bogus number: %s.", str);
			break;
		}
		if (tval >= base) {
			warn("Bogus number: %s: digit %d not in base %d",
			    str, tval, base);
			break;
		}
		val = val * base + tval;
	} while (*ptr);

	if (negative)
		max = (1 << (size - 1));
	else
		max = (1 << (size - 1)) + ((1 << (size - 1)) - 1);
	if (val > max) {
		switch (base) {
		case 8:
			warn("value %s%o exceeds max (%d) for precision.",
			    negative ? "-" : "", val, max);
			break;
		case 16:
			warn("value %s%x exceeds max (%d) for precision.",
			    negative ? "-" : "", val, max);
			break;
		default:
			warn("value %s%u exceeds max (%d) for precision.",
			    negative ? "-" : "", val, max);
			break;
		}
	}
	if (negative) {
		switch (size) {
		case 8:
			*buf = -(unsigned long)val;
			break;
		case 16:
			putShort(buf, -(unsigned long)val);
			break;
		case 32:
			putLong(buf, -(unsigned long)val);
			break;
		default:
			warn("Unexpected integer size: %d", size);
			break;
		}
	} else {
		switch (size) {
		case 8:
			*buf = (u_int8_t)val;
			break;
		case 16:
			putUShort(buf, (u_int16_t)val);
			break;
		case 32:
			putULong(buf, val);
			break;
		default:
			warn("Unexpected integer size: %d", size);
			break;
		}
	}
}

/*
 * date :== NUMBER NUMBER SLASH NUMBER SLASH NUMBER
 *		NUMBER COLON NUMBER COLON NUMBER SEMI
 *
 * Dates are always in GMT; first number is day of week; next is
 * year/month/day; next is hours:minutes:seconds on a 24-hour
 * clock.
 */
time_t
parse_date(FILE * cfile)
{
	struct tm tm;
	int guess, token;
	char *val;
	static int months[11] = {31, 59, 90, 120, 151, 181,
	    212, 243, 273, 304, 334};

	/* Day of week... */
	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("numeric day of week expected.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	tm.tm_wday = atoi(val);

	/* Year... */
	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("numeric year expected.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	tm.tm_year = atoi(val);
	if (tm.tm_year > 1900)
		tm.tm_year -= 1900;

	/* Slash separating year from month... */
	token = next_token(&val, cfile);
	if (token != SLASH) {
		parse_warn("expected slash separating year from month.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	/* Month... */
	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("numeric month expected.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	tm.tm_mon = atoi(val) - 1;

	/* Slash separating month from day... */
	token = next_token(&val, cfile);
	if (token != SLASH) {
		parse_warn("expected slash separating month from day.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	/* Month... */
	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("numeric day of month expected.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	tm.tm_mday = atoi(val);

	/* Hour... */
	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("numeric hour expected.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	tm.tm_hour = atoi(val);

	/* Colon separating hour from minute... */
	token = next_token(&val, cfile);
	if (token != COLON) {
		parse_warn("expected colon separating hour from minute.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	/* Minute... */
	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("numeric minute expected.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	tm.tm_min = atoi(val);

	/* Colon separating minute from second... */
	token = next_token(&val, cfile);
	if (token != COLON) {
		parse_warn("expected colon separating hour from minute.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	/* Minute... */
	token = next_token(&val, cfile);
	if (token != NUMBER) {
		parse_warn("numeric minute expected.");
		if (token != SEMI)
			skip_to_semi(cfile);
		return (NULL);
	}
	tm.tm_sec = atoi(val);
	tm.tm_isdst = 0;

	/* XXX: We assume that mktime does not use tm_yday. */
	tm.tm_yday = 0;

	/* Make sure the date ends in a semicolon... */
	token = next_token(&val, cfile);
	if (token != SEMI) {
		parse_warn("semicolon expected.");
		skip_to_semi(cfile);
		return (NULL);
	}
	/* Guess the time value... */
	guess = ((((((365 * (tm.tm_year - 70) +	/* Days in years since '70 */
	    (tm.tm_year - 69) / 4 +	/* Leap days since '70 */
	    (tm.tm_mon			/* Days in months this year */
	    ? months[tm.tm_mon - 1] : 0) +
	    (tm.tm_mon > 1 &&		/* Leap day this year */
	    !((tm.tm_year - 72) & 3)) +
	    tm.tm_mday - 1) * 24) +	/* Day of month */
	    tm.tm_hour) * 60) + tm.tm_min) * 60) + tm.tm_sec;

	/*
	 * This guess could be wrong because of leap seconds or other
	 * weirdness we don't know about that the system does.   For
	 * now, we're just going to accept the guess, but at some point
	 * it might be nice to do a successive approximation here to get
	 * an exact value.   Even if the error is small, if the server
	 * is restarted frequently (and thus the lease database is
	 * reread), the error could accumulate into something
	 * significant.
	 */
	return (guess);
}