.\" $OpenBSD: dvmrpd.conf.5,v 1.8 2012/04/24 14:56:09 jmc Exp $ .\" .\" Copyright (c) 2005, 2006 Esben Norby .\" Copyright (c) 2004 Claudio Jeker .\" Copyright (c) 2003, 2004 Henning Brauer .\" Copyright (c) 2002 Daniel Hartmeier .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: April 24 2012 $ .Dt DVMRPD.CONF 5 .Os .Sh NAME .Nm dvmrpd.conf .Nd Distance Vector Multicast Routing Protocol daemon configuration file .Sh DESCRIPTION The .Xr dvmrpd 8 daemon implements the Distance Vector Multicast Routing Protocol as described in draft-ietf-idmr-dvmrp-v3-11 DVMRP Version 3. .Sh SECTIONS The .Nm config file is divided into three main sections. .Bl -tag -width xxxx .It Sy Macros User-defined variables may be defined and used later, simplifying the configuration file. .It Sy Global Configuration Global settings for .Xr dvmrpd 8 . A number of global settings can be overruled in specific areas or interfaces. .It Sy Groups Groups are used to group similar interfaces, simplifying configuration. .El .Sh MACROS Macros can be defined that will later be expanded in context. Macro names must start with a letter, digit, or underscore, and may contain any of those characters. Macro names may not be reserved words (for example, .Ic area , .Ic interface , or .Ic hello-interval ) . Macros are not expanded inside quotes. .Pp For example: .Bd -literal -offset indent hi="60" group { interface em0 { query-interval $hi } } .Ed .Pp The same can be accomplished by specifying the query-interval globally or within the group declaration. .Sh GLOBAL CONFIGURATION All interface related settings can be configured globally, per group and per interface. The only settings that can be set globally and not overruled are listed below. .Bl -tag -width Ds .It Xo .Ic mfc-update .Pq Ic yes Ns | Ns Ic no .Xc If set to .Ic yes , the kernel Multicast Forwarding Cache is updated with information from the daemon. The default is .Ic yes . .El .Sh GROUPS Groups can be used to easily configure similar interfaces. All interface-specific parameters can be configured per group, overruling the global settings. .Bl -tag -width Ds .It Ic group Specify a group section, grouping one or more interfaces. .Bd -literal -offset indent group { robustness 4 interface em0 interface em1 } .Ed .El .Sh INTERFACES Each interface can have several parameters configured individually, otherwise they are inherited. .Bd -literal -offset indent interface em0 { } .Ed .Pp Interface-specific parameters are listed below. .Bl -tag -width Ds .It Ic igmp-version Ar number Do not use a newer version than specified. Valid range 1\(en2. The default version used is 2. .It Ic last-member-query-count Ar count The default value is equal to the default robustness variable; valid range is 1\(en255. .It Ic last-member-query-interval Ar seconds The default value is 10; valid range is 1\(en65535. .It Ic metric Ar cost Set the interface metric a.k.a. cost. The default value is 1; valid range is 1\(en31. .It Ic passive Prevent transmission and reception of IGMP and DVMRP packets on this interface. .It Ic query-interval Ar seconds Set the query interval. The default value is 125 seconds; valid range is 1\(en65535 seconds. .It Ic query-response-interval Ar seconds Set the query-response-interval; note that this must be less than the query-interval. The default value is 100 seconds; valid range is 1\(en65535 seconds. .It Ic robustness Ar factor Set the robustness factor; note that this value might have an impact on other variables. The default value is 2; valid range is 1\(en4. .It Ic startup-query-count Ar count Set the startup-query-interval, used during startup to speed up the process of building the IGMP table for an interface. The default value is equal to the default robustness variable; valid range is the same as the robustness variable. .It Ic startup-query-interval Ar seconds Used during startup, see the startup-query-interval. The default value is query-interval / 4; valid range is the same as the query-interval. .El .Sh FILES .Bl -tag -width "/etc/dvmrpd.conf" -compact .It Pa /etc/dvmrpd.conf .Xr dvmrpd 8 configuration file .El .Sh SEE ALSO .Xr dvmrpctl 8 , .Xr dvmrpd 8 , .Xr rc.conf.local 8 .Rs .%R "draft-ietf-idmr-dvmrp-v3-11" .%T "DVMRP Version 3" .%D August 2000 .Re .Sh HISTORY The .Nm file format first appeared in .Ox 4.0 .