.\" $OpenBSD: hostapd.conf.5,v 1.8 2005/07/04 22:49:02 jmc Exp $ .\" .\" Copyright (c) 2004, 2005 Reyk Floeter .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd April 13, 2004 .Dt HOSTAPD.CONF 5 .Os .Sh NAME .Nm hostapd.conf .Nd configuration file for the Host Access Point daemon .Sh DESCRIPTION .Nm is the configuration file for the .Xr hostapd 8 daemon. .Sh SECTIONS The .Nm file is divided into four main sections. .Bl -tag -width xxxx .It Sy Macros User-defined variables may be defined and used later, simplifying the configuration file. .It Sy Tables Tables provide a mechanism to handle a large number of link layer addresses easily, with increased performance and flexibility. .It Sy Global Configuration Global runtime settings for .Xr hostapd 8 . .It Sy Event rules Event rules provide a powerful mechanism to trigger certain actions when receiving specified IEEE 802.11 frames. .El .Pp Comments can be put anywhere in the file using a hash mark .Pq Sq # , and extend to the end of the current line. .Sh MACROS Much like .Xr cpp 1 or .Xr m4 1 , macros can be defined that will later be expanded in context. Macro names must start with a letter, and may contain letters, digits and underscores. Macro names may not be reserved words (for example, .Ic set , .Ic interface , or .Ic hostap ) . Macros are not expanded inside quotes. .Pp For example: .Bd -literal -offset indent wlan="ath0" set iapp interface $wlan .Ed .Sh TABLES Tables are named structures which can hold a collection of link layer addresses, masked address ranges, and link layer to IP address assignments. Lookups against tables in .Xr hostapd 8 are relatively fast, making a single rule with tables much more efficient, in terms of processor usage and memory consumption, than a large number of rules which differ only in link layer addresses. .Pp Tables are used for .Xr hostapd 8 .Em event rules to match specified IEEE 802.11 link layer addresses and address ranges, and the capability to assign link layer to IP addresses is a requirement for advanced IAPP functionality. .Pp Table options may be presented after the table name declaration. The following options are supported: .Bl -tag -width const .It Ic const The table is constant and cannot be later changed from its original definition. .El .Pp For example: .Bd -literal -offset indent cisco="00:40:06:ff:ff:ff / ff:ff:ff:00:00:00" table { $cisco, 00:0d:60:ff:f1:2a } table const { 00:00:24:c3:40:18 -> 10.195.64.24, 00:00:24:c3:40:19 -> 10.195.64.25, 00:00:24:c3:40:1a -> 10.195.64.26 } .Ed .Sh GLOBAL CONFIGURATION The following configuration settings are understood: .Bl -tag -width Ds .It Ic set hostap interface Ar interface Specify the wireless interface running in Host AP mode. This option could be omitted to use .Xr hostapd 8 to log received IAPP messages. .It Ic set hostap mode Ar mode Specify the Host AP capture mode. The supported modes are: .Pp .Bl -tag -width radiotap -offset indent -compact .It Ic radiotap Capture IEEE 802.11 frames with additional radiotap headers. They will provide optional but useful information like received frame signal levels. .It Ic pcap Capture plain IEEE 802.11 frames. .El .It Ic set iapp interface Ar interface Specify the mandatory Inter-Access-Point (IAPP) interface. It is important that the IAPP interface is on a trusted network because there is no authentication and an attacker could force disassociation of selected stations on all listening access points. .It Ic set iapp mode Ar mode Specify the IAPP mode. The supported modes are: .Pp .Bl -tag -width broadcast -offset indent -compact .It Ic multicast Use multicast frames. .It Ic broadcast Use broadcast frames. .El .Pp The default is multicast. The multicast group used is 224.0.1.178. .El .Sh EVENT RULES Event rules provide a powerful way to trigger a certain action when receiving specified IEEE 802.11 frames on the .Em hostap interface . The rules are handled in sequential order, from first to last. .Pp In difference to packet filter rules like in .Xr pf.conf 5 , the .Xr hostapd 8 event rules are handled without a state; each rule is processed indepedently from the others and from any previous actions. .Pp All .Xr hostapd 8 event rules are single line statements beginning with the mandatory .Ic hostap handle keywords and optional rule options, frame matching, a specified action, and a limit: .Bd -filled -offset indent .Ic hostap handle .Op Ar option .Op Ar frame .Op Ar action .Op Ar limit .Ed .Pp The optional parts are defined below. .Ss Rule Option The rule .Ar option will modify the behaviour of handling the statement. There are two possible options, .Ic quick and .Ic skip . If either the keyword .Ic quick or the keyword .Ic skip is specified, no further event rules will be handled for this frame after processing this rule successfully. The keyword .Ic skip additionally skips any further IAPP processing of the frame, which is normally done after handling the event rules. .Ss Rule Frame The .Ar frame description specifies a mechanism to match IEEE 802.11 frames. .Bl -tag -width Ds .It Ic any Match all frames. .It Xo .Ic frame .Op Ar type .Op Ar dir .Op Ar from .Op Ar to .Op Ar bssid .Xc Apply rules to frames matching the given parameters. The parameters are explained below. .Pp The .Ar type parameter specifies the frame type to match on. The frame type may be specified in the following ways: .Bl -tag -width Ds .It Ic type any Match all frame types. .It Xo .Ic type .Op Ic not .Ic data .Xc Match data frames. Presence of the .Ic not keyword negates the match and will match all non-data frames. .It Xo .Ic type .Op Ic not .Ic management .Oo Op Ic not .Ar subtype Oc .Xc Match management frames. The .Ar subtype argument may be specified to optionally match management frames of the given subtype. The subtype match may be negated by specifying the .Ic not keyword. See the .Sx Management Frame Subtypes section below for available subtypes specifications. .El .Pp The .Ar dir parameter specifies the direction the frame is being sent. The direction may be specified in the following ways: .Bl -tag -width Ds .It Ic dir any Match all directions. .It Ic dir Ar framedir Match frames with the given direction .Ar framedir. See the .Sx Frame Directions section below for available direction specifications. .El .Pp The .Ar from , to , and .Ar bssid parameters specify the IEEE 802.11 address fields to match on. They can be specified in the following ways: .Bl -tag -width Ds .It Xo .Ic ( from \*(Ba to \*(Ba bssid ) Ic any .Xc Allow all addresses for the specified address field. .It Xo .Ic ( from \*(Ba to \*(Ba bssid ) .Op Ic not .Aq Ar table .Xc Allow allow addresses from the given .Aq Ar table (see .Sx Tables above) for the specified address field. .It Xo .Ic ( from \*(Ba to \*(Ba bssid ) .Op Ic not .Ar lladdr .Xc Allow the given address .Ar lladdr for the specified address field. .El .El .Ss Rule Action An optional .Ar action is triggered if a received IEEE 802.11 frame matches the frame description. The following actions are supported: .Bl -tag -width Ds .It Xo .Ic with frame Ar type .Op Ar dir .Ar from to bssid .Xc Send an arbitrary constructed frame to the wireless network. The arguments are as follows. .Pp The .Ar type describes the IEEE 802.11 frame type to send, specified in the frame control header. The following frames types are supported at present: .Bl -tag -width Ds .It Ic type data Send a data frame. This is normally used to encapsulate ordinary IEEE 802.3 frames into IEEE 802.11 wireless frames. .It Ic type Ic management Ar subtype Send a management frame with the specified subtype. Management frames are used to control states and to find access points and IBSS nodes in IEEE 802.11 networks. See the .Sx Management Frame Subtypes section below for available subtypes specifications. .El .Pp The .Ar dir describes the direction the IEEE 802.11 frame will be sent. It has the following syntax: .Bd -filled -offset indent .Ic dir Ar framedir .Ed .Pp See the .Sx Frame Directions section below for available direction specifications. .Pp The .Ar from , to , and .Ar bssid arguments specify the link layer address fields used in IEEE 802.11 frames. All address fields are mandatory in the frame action. The optional fourth address field used by wireless distribution systems (WDS) is currently not supported. Each argument is specified by a keyword of the same name .Po .Ic from , to , or .Ic bssid .Pc followed by one of the following address specifications: .Bl -tag -width "&refaddr" .It Ar lladdr Specify the link layer addresses used in the IEEE 802.11 frame address field. The link layer address .Ql ff:ff:ff:ff:ff:ff is the IEEE 802.11 broadcast address. .It Li & Ns Ar refaddr Fill in a link layer address from the previously matched IEEE 802.11 frame. .Ic &from will use the source link layer address; .Ic &to the destination link layer address; and .Ic &bssid the BSSID link layer address of the previously matched frame. .It Ic random Use a random link layer address in the specified IEEE 802.11 frame address field. Multicast and broadcast link layer addresses will be skipped. .El .It Ic with iapp type Ar iapp-type Send a .Xr hostapd 8 specific IAPP frame with a raw IEEE 802.11 packet dump of the received frame to the wired network. The only supported .Ar iapp-type is .Ic radiotap . .It Ic with log Op Ic verbose Write informational messages to the local system log (see .Xr syslogd 8 ) or standard error. .It Ic node add | delete Ar lladdr Add or remove the specified node from the internal kernel node table. .It Ic resend Resend the received IEEE 802.11 frame. .El .Ss Rule Limit It is possible to limit handling of specific rules with the .Ic limit keyword: .Bd -filled -offset indent .Ic limit .Ar number .Ic sec \*(Ba usec .Ed .Pp In some cases it is absolutely necessary to use limited matching to protect .Xr hostapd 8 against excessive flooding with IEEE 802.11 frames. For example, beacon frames will be normally received every 100 ms. .Ss Management Frame Subtypes The .Ar subtype describes the IEEE 802.11 frame subtype, specified in the frame control header. The choice of subtypes depends on the used frame type. .Xr hostapd 8 currently only supports management frame subtypes. Most frame subtypes require an additional subtype-specific header in the frame body, but currently only the .Ic deauth and .Ic disassoc reason codes are supported: .Pp .Bl -tag -width Ds -compact .It Ic subtype beacon A beacon frame. Wireless access points and devices running in .Em ibss master or .Em hostap mode continuously send beacon frames to indicate their presence, traffic load, and capabilities. .It Ic subtype deauth Op Ar reason A deauthentication frame with an optional reason code. Deauthenticated stations will lose any IEEE 802.11 operational state. .It Ic subtype disassoc Op Ar reason A disassociation frame with an optional reason code. .It Ic subtype assoc request An association request frame. .It Ic subtype assoc response An association response frame. .It Ic subtype atim An announcement traffic indication message (ATIM frame). .It Xo .Ic subtype auth Op Ic open request \*(Ba response .Xc An authentication frame. .It Ic subtype probe request A probe request frame. Probe requests are used to probe for access points and IBSS nodes. .It Ic subtype probe response A probe response frame. .It Ic subtype reassoc request A re-association request frame. .It Ic subtype reassoc response A re-association response frame. .El .Pp The .Ar reason defines a descriptive reason for the actual .Em deauthentication or .Em disassociation of a station: .Pp .Bl -tag -width Ds -compact .It Ic reason assoc expire Disassociated due to inactivity. .It Ic reason assoc leave Disassociated because the sending station is leaving or has left the wireless network. .It Ic reason assoc toomany Disassociated because the access point has reached its limit of associated stations. .It Ic reason auth expire Previous authentication no longer valid. .It Ic reason auth leave Deauthenticated because the sending station is leaving or has left the wireless network. .It Ic reason ie invalid IEEE 802.11i extension. .It Ic reason mic failure IEEE 802.11i extension. .It Ic reason not authed Frame received from unauthenticated station. .It Ic reason assoc not authed Frame received from an associated but unauthenticated station. .It Ic reason not assoced Frame received from unassociated station. .It Ic reason rsn required IEEE 802.11i extension. .It Ic reason rsn inconsistent IEEE 802.11i extension. .It Ic reason unspecified Unspecified reason. .El .Ss Frame Directions The direction a frame is being transmitted .Pq Ar framedir can be specified in the following ways: .Pp .Bl -tag -width Ds -compact .It Ic dir no ds No distribution system direction is used for management frames. .It Ic dir to ds A frame sent from a station to the distribution system, the access point. .It Ic dir from ds A frame from the distribution system, the access point, to a station. .It Ic dir ds to ds A frame direction used by wireless distribution systems (WDS) for wireless access point to access point communication. .El .Sh GRAMMAR Syntax for .Nm in BNF: .Bd -literal grammar = [ varset ] | [ tabledef ] | option | [ event ] varset = varname "=" varvalue tabledef = "table" table tableopts table = "<" tablename ">" tableopts = "const" | "{" [ "\n" ] "}" | "{" [ "\\n" ] tableaddrlist [ "\\n" ] "}" tableaddrlist = lladdr [ "->" ipv4-dotted-quad | "&" lladdr-mask | "/" number ] [ "," ] [ tableaddrlist ] option = "set" ( "hostap" "interface" name | "iapp" "interface" name [ "passive" ] | [ "iapp" "mode" ( "multicast" | "broadcast" ] ) event = "hostap" "handle" [ eventopt ] [ frmmatch ] [ action ] [ limit ] eventopt = "skip" | "quick" action = "with" ( "log" [ "verbose" ] | "frame" frmaction | "iapp" "type" "radiotap" | "node" ( "add" | "delete" ) frmactionaddr ) frmmatch = [ frmmatchtype ] [ "dir" ( "any" | [ "!" ] frmdir ) ] [ ( "from" | "to" | "bssid" ) frmmatchaddr ] frmmatchtype = "type" ( "any" | [ "!" ] ( "data" | "management" [ frmmatchmgmt ] ) ) frmmatchmgmt = "subtype" ( "any" | [ "!" ] frmsubtype ) frmmatchaddr = "any" | [ "!" ] table | [ "!" ] lladdr frmaction = frmactiontype [ "dir" frmdir ] ( "from" , "to" , "bssid" ) frmactionaddr frmactiontype = "type" ( "data" | "management" "subtype" frmsubtype ) frmactionaddr = lladdr | refaddr | "random" limit = "limit" number ( "sec" | "usec" ) frmsubtype = ( "probe-request" | "probe-resp" | "beacon" ) [ frmelems ] | "atim" | "auth" | "deauth" | "assoc-request" | "assoc-resp" | "reassoc-request" | "reassoc-response" frmelems = "nwid" [ "!" ] name [ frmelems ] frmdir = ( "no" | "to" | "from" | "ds" "to" ) "ds" refaddr = "&" ( "from" | "to" | "bssid" ) .Ed .Sh FILES .Bl -tag -width "/etc/hostapd.conf" -compact .It Pa /etc/hostapd.conf Default location of the configuration file. .El .Sh SEE ALSO .Xr hostapd 8 .Sh AUTHORS The .Xr hostapd 8 program was written by .An Reyk Floeter Aq reyk@openbsd.org .