.\" $OpenBSD: ldomctl.8,v 1.8 2014/09/29 10:53:53 stsp Exp $ .\" .\" Copyright (c) 2012 Mark Kettenis .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: September 29 2014 $ .Dt LDOMCTL 8 sparc64 .Os .Sh NAME .Nm ldomctl .Nd Logical Domain management interface .Sh SYNOPSIS .Nm ldomctl .Ar command .Op Ar argument ... .Sh DESCRIPTION The .Nm program is used to manage logical domains on sun4v systems. It can be used to assign resources to the primary and guest domains, start and stop guest domains from the primary domain, and to display information about domains running on the system. .Pp The following commands are available: .Bl -tag -width Ds .It Cm delete Ar configuration Delete the specified configuration from non-volatile storage. .It Cm download Ar directory Save a logical domain configuration to non-volatile storage on the service processor. The configuration will take effect after the primary domain is rebooted. The name of the configuration is taken from the name of the .Ar directory which must contain files created with the .Cm init-system command. The download is aborted if a configuration with the same name already exists. .It Cm dump Ar configuration Dump the specified configuration from non-volatile storage into the current working directory. .It Cm init-system Ar file Generates files describing a logical domain configuration. The generated files are written to the current working directory. The provided .Ar file describes resources assigned to logical domains in a plain text format with the following syntax: .Bl -tag -width Ds .It Ic domain Ar name Ic \&{ Ar resource ... Ic \&} Declares a scope for resources assigned to the specified domain. The scope must be opened and closed with curly braces and contains one or more of the following keywords, each on a separate line. A scope with .Ar name "primary" configures resources for the primary domain. If no configuration for the primary domain exists it is assigned all CPU and memory resources not used by any guest domains. .It Ic vcpu Ar number Declares the number of virtual CPUs assigned to a domain. .It Ic memory Ar number Ns Op Ar unit Declares the amount of memory assigned to a domain, in bytes. Optionally, the units 'K', 'M', or 'G', for kilo-, mega-, and gigabytes can be used. .It Ic vdisk Ar file The specified file is used to back a virtual disk of the guest domain. .Ar file can be a block device node or a disk image file created with .Xr dd 1 . This keyword can be used multiple times. .It Ic vnet Op Ic \&{ Ar keyword value ... Ic \&} Assign a .Xr vnet 4 network interface to the guest domain. This keyword can be used multiple times. The curly braces are optional and can contain the following keywords: .Bl -tag -width Ds .It Ic mac-addr Ar address Configures the MAC address of the interface. .It Ic mtu Ar number Configures the MTU of the interface. .El .El .It Cm list List configurations stored in non-volatile storage. Indicate the currently running configuration, and the configuration which will be used next (after rebooting the primary domain) if it differs from the currently running one. .It Cm panic Ar domain Panic a guest domain. The exact behaviour of this command depends on the OS running in the domain. For .Ox the default behaviour is to enter .Xr ddb 4 . .It Cm start Ar domain Start a guest domain. .It Cm status Op Ar domain Display status information for .Ar domain , or for all domains running on the system. .It Cm stop Ar domain Stop a guest domain. .El .Sh EXAMPLES A system using factory defaults has a single "factory-default" configuration: .Bd -literal -offset indent # ldomctl list factory-default [current] .Ed .Pp Create a new configuration based on the defaults: .Bd -literal -offset indent # mkdir factory-default # cd factory-default # ldomctl dump # cd .. # cp -R factory-default openbsd # cd openbsd .Ed .Pp A file describing the desired configuration must be created: .Bd -literal -offset indent # cat ldom.conf domain puffy { vcpu 12 memory 4G vdisk "/home/puffy/vdisk0" vdisk "/home/puffy/vdisk1" vnet } domain salmah { vcpu 8 memory 2G vdisk "/home/salmah/vdisk0" vdisk "/home/salmah/vdisk1" vnet } .Ed .Pp Generate a set of configuration files and download to non-volatile storage. If a configuration with the same name already exists, it must be removed first: .Bd -literal -offset indent # ldomctl init-system ldom.conf # cd .. # ldomctl delete openbsd # ldomctl download openbsd # ldomctl list factory-default [current] openbsd [next] .Ed .Pp Create a virtual disk image for each guest domain: .Bd -literal -offset indent # dd if=/dev/zero of=/home/puffy/vdisk0 bs=1m count=8192 # dd if=/dev/zero of=/home/salmah/vdisk0 bs=1m count=8192 .Ed .Pp The minirootfs install media can be used to boot guest domains: .Bd -literal -offset indent # cp miniroot56.fs /home/puffy/vdisk1 # cp miniroot56.fs /home/salmah/vdisk1 .Ed .Pp Enable .Xr ldomd 8 by adding the following to .Pa /etc/rc.conf.local : .Pp .Dl ldomd_flags= .Pp Halt the primary domain and reset the machine from ALOM: .Bd -literal -offset indent # halt sc> reset -c .Ed .Pp The machine will now reset and boot into the new configuration. The primary domain should have less CPUs and memory, since they are now assigned to the guest domains: .Bd -literal -offset indent # ldomctl status primary running OpenBSD running 1% puffy running OpenBoot Primary Boot Loader 8% salmah running OpenBoot Primary Boot Loader 12% .Ed .Pp Configure the .Xr vnet 4 interfaces for the guest domains. This example bridges guest domains into the physical network: .Bd -literal -offset indent # ifconfig vnet0 -inet6 up # ifconfig vnet1 -inet6 up # ifconfig bridge0 create # ifconfig bridge0 add em0 add vnet0 add vnet1 up .Ed .Pp Access the console of the first domain and boot it: .Bd -literal -offset indent # cu -l ttyV0 ok boot disk1 .Ed .Sh SEE ALSO .Xr dd 1 , .Xr ddb 4 , .Xr vnet 4 , .Xr ldomd 8 .Sh HISTORY The .Nm program first appeared in .Ox 5.3 . .Sh AUTHORS The .Nm program was written by .An Mark Kettenis Aq Mt kettenis@openbsd.org .