/* $OpenBSD: mopdef.h,v 1.3 2001/08/12 12:03:03 heko Exp $ */ /* * Copyright (c) 1993-95 Mats O Jansson. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Mats O Jansson. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $OpenBSD: mopdef.h,v 1.3 2001/08/12 12:03:03 heko Exp $ * */ #ifndef _MOPDEF_H_ #define _MOPDEF_H_ #define MOP_K_PROTO_DL 0x6001 /* MOP Load/Dump Protocol */ #define MOP_K_PROTO_RC 0x6002 /* MOP Remote Console Protocol */ #define MOP_K_PROTO_LP 0x9000 /* MOP Loopback Protocol */ #define MOP_K_PROTO_802_DL { 0x08, 0x00, 0x2b, 0x60, 0x01 } #define MOP_K_PROTO_802_RC { 0x08, 0x00, 0x2b, 0x60, 0x02 } #define MOP_K_PROTO_802_LP { 0x08, 0x00, 0x2b, 0x90, 0x00 } #define MOP_K_PROTO_802_DSAP 0xaa #define MOP_K_PROTO_802_SSAP 0xaa #define MOP_K_PROTO_802_CNTL 0x03 #define TRANS_ETHER 1 /* Packet in Ethernet format */ #define TRANS_8023 2 /* Packet in 802.3 format */ #define TRANS_AND 0x1000 /* Both Ethernet and 802.3 */ /* The following constants are defined in module MOPDEF.SDL in MOM */ #define MOP_K_CODE_MIN 0 #define MOP_K_CODE_MLT 0 /* Memory Load with transfer address */ #define MOP_K_CODE_DCM 1 /* Dump Complete */ #define MOP_K_CODE_MLD 2 /* Memory Load */ #define MOP_K_CODE_ASV 3 /* Assistance volunteer (NI only */ #define MOP_K_CODE_RMD 4 /* Request memory dump */ #define MOP_K_CODE_RID 5 /* Request ID */ #define MOP_K_CODE_BOT 6 /* Boot */ #define MOP_K_CODE_SID 7 /* System ID */ #define MOP_K_CODE_RPR 8 /* Request program */ #define MOP_K_CODE_RQC 9 /* Request Counters */ #define MOP_K_CODE_RML 10 /* Request memory load */ #define MOP_K_CODE_CNT 11 /* Counters */ #define MOP_K_CODE_RDS 12 /* Request Dump Service */ #define MOP_K_CODE_MMR 12 /* MOP Mode Running */ #define MOP_K_CODE_RVC 13 /* Reserve Console */ #define MOP_K_CODE_MDD 14 /* Memory dump data */ #define MOP_K_CODE_RLC 15 /* Release Console */ #define MOP_K_CODE_CCP 17 /* Console Command and Poll */ #define MOP_K_CODE_CRA 19 /* Console Response and Acknnowledge */ #define MOP_K_CODE_PLT 20 /* Parameter load with transfer address*/ #define MOP_K_CODE_ALD 24 /* Active loop data */ #define MOP_K_CODE_PLD 26 /* Passive looped data */ #define MOP_K_CODE_MAX 26 #define MOP_K_PGTY_MIN 0 #define MOP_K_PGTY_SECLDR 0 /* Secondary Loader */ #define MOP_K_PGTY_TERLDR 1 /* Tertiary Loader */ #define MOP_K_PGTY_OPRSYS 2 /* Operating System */ #define MOP_K_PGTY_MGNTFL 3 /* Management File */ #define MOP_K_PGTY_MAX 3 #define MOP_K_BPTY_MIN 0 #define MOP_K_BPTY_SYS 0 /* System Processor */ #define MOP_K_BPTY_COM 1 /* Communication Processor */ #define MOP_K_BPTY_MAX 1 #define MOP_K_RML_ERROR_MIN 0 #define MOP_K_RML_ERROR_NONE 0 /* None */ #define MOP_K_RML_ERROR_NO_LOAD 1 /* Image data not properly loaded */ #define MOP_K_RML_ERROR_MAX 1 #define MOP_K_PLTP_MIN 0 #define MOP_K_PLTP_END 0 /* End Mark */ #define MOP_K_PLTP_TSN 1 /* Target System Name */ #define MOP_K_PLTP_TSA 2 /* Target System Address */ #define MOP_K_PLTP_HSN 3 /* Host System Name */ #define MOP_K_PLTP_HSA 4 /* Host System Address */ #define MOP_K_PLTP_HST 5 /* Host System Time */ #define MOP_K_PLTP_MAX 5 #define MOP_K_BOT_CNTL_MIN 0 #define MOP_K_BOT_CNTL_SERVER 0 /* Boot-Server */ #define MOP_K_BOT_CNTL_DEVICE 1 /* Boot-Device */ #define MOP_K_BOT_CNTL_MAX 1 #define MOP_K_INFO_VER 1 /* Maintenance Version */ #define MOP_K_INFO_MFCT 2 /* Maintenance Functions */ #define MOP_K_INFO_CNU 3 /* Console User */ #define MOP_K_INFO_RTM 4 /* Reservation Timer */ #define MOP_K_INFO_CSZ 5 /* Console Command Size */ #define MOP_K_INFO_RSZ 6 /* Console Response Size */ #define MOP_K_INFO_HWA 7 /* Hardware Address */ #define MOP_K_INFO_TIME 8 /* System Time */ #define MOP_K_INFO_SOFD 100 /* Communication Device */ #define MOP_K_INFO_SFID 200 /* Software ID */ #define MOP_K_INFO_PRTY 300 /* System Processor */ #define MOP_K_INFO_DLTY 400 /* Data Link Type */ #define MOP_K_INFO_DLBSZ 401 /* Data Link Buffer Size */ #define MOP_K_DLTY_MIN 1 #define MOP_K_DLTY_NI 1 /* Ethernet */ #define MOP_K_DLTY_DDCMP 2 /* DDCMP */ #define MOP_K_DLTY_LAPB 3 /* LAPB (frame level of X.25) */ #define MOP_K_DLTY_MAX 3 #define MOP_K_PRTY_MIN 0 #define MOP_K_PRTY_11 1 /* PDP-11 (UNIBUS) */ #define MOP_K_PRTY_CMSV 2 /* Communication Server */ #define MOP_K_PRTY_PRO 3 /* Professional */ #define MOP_K_PRTY_SCO 4 /* Scorpio */ #define MOP_K_PRTY_AMB 5 /* Amber */ #define MOP_K_PRTY_BRI 6 /* XLII Bridge */ #define MOP_K_PRTY_MAX 6 #define MOP_K_SFID_FORM_MIN -2 #define MOP_K_SFID_FORM_MAINT -2 /* Maintenance System */ #define MOP_K_SFID_FORM_OPRSYS -1 /* Standard Operating System */ #define MOP_K_SFID_FORM_NONE 0 /* None */ #define MOP_K_SFID_FORM_MAX 0 #define MOP_K_SFID_CUST 'CP' /* Customer product */ #define MOP_K_SFID_DEC 'DP' /* DEC product */ #define MOP_K_SFID_DELIM_ID '#' /* Delimiter identifier */ #define MOP_K_DLBSZ_DEFAULT 262 /* Buffersize */ #define MOP_K_NILOOP_REPLY 1 /* Response */ #define MOP_K_NILOOP_FORWARD 2 /* Forward Data */ #define MOP_DL_MULTICAST { 0xab, 0x00, 0x00, 0x01, 0x00, 0x00 } #define MOP_RC_MULTICAST { 0xab, 0x00, 0x00, 0x02, 0x00, 0x00 } #define MOP_LP_MULTICAST { 0xcf, 0x00, 0x00, 0x00, 0x00, 0x00 } #define MOP_K_RPR_FORMAT_V3 1 /* Format Version of RPR */ #define MOP_K_RPR_FORMAT 4 /* Format Version of RPR */ #define IHD_C_MINCODE -1 /* Low bound of ALIAS value */ #define IHD_C_NATIVE -1 /* Native mode image */ #define IHD_C_RSX 0 /* RSX image produced by TKB */ #define IHD_C_BPA 1 /* BASIC plus analog */ #define IHD_C_ALIAS 2 /* Last 126 bytes contains ASCIC of image to activate */ #define IHD_C_CLI 3 /* Image is CLI, run LOGINOUT */ #define IHD_C_PMAX 4 /* PMAX system image */ #define IHD_C_ALPHA 5 /* ALPHA system image */ #define IHD_C_MAXCODE 5 /* High bound of ALIAS value */ #define IHD_W_SIZE 0 #define IHD_W_ACTIVOFF 2 #define IHD_B_HDRBLKCNT 16 #define IHD_W_ALIAS 510 #define ISD_W_PAGCNT 2 #define ISD_V_VPN 4 #define ISD_M_VPN 0x1fffff #define IHA_L_TFRADR1 0 #define EISD_L_SECSIZE 12 #define EIHD_L_ISDOFF 12 #define EIHD_L_HDRBLKCNT 76 #define L_BSA 0x08 /* RSX base address */ #define L_BLDZ 0x0e /* RSX image size (* 64) */ #define L_BXFR 0xe8 /* RSX transfer address */ #define L_BBLK 0xf0 /* RSX header block count */ #ifndef MOPDEF_SUPRESS_EXTERN extern char dl_mcst[]; extern char rc_mcst[]; extern char dl_802_proto[]; extern char rc_802_proto[]; extern char lp_802_proto[]; #endif /* MOPDEF_SUPRESS_EXTERN */ #endif /* _MOPDEF_H_ */