.\" $OpenBSD: dig.1,v 1.2 1997/03/12 10:42:12 downsj Exp $ .\" $From: dig.1,v 8.1 1994/12/15 06:24:10 vixie Exp $ .\" .\" ++Copyright++ 1993 .\" - .\" Copyright (c) 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" - .\" Portions Copyright (c) 1993 by Digital Equipment Corporation. .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies, and that .\" the name of Digital Equipment Corporation not be used in advertising or .\" publicity pertaining to distribution of the document or software without .\" specific, written prior permission. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL .\" WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT .\" CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL .\" DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR .\" PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS .\" ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS .\" SOFTWARE. .\" - .\" --Copyright-- .\" .\" Distributed with 'dig' version 2.0 from University of Southern .\" California Information Sciences Institute (USC-ISI). .\" .\" dig.1 2.0 (USC-ISI) 8/30/90 .\" .\" Man page reformatted for this release by Andrew Cherenson .\" (arc@sgi.com) .\" .TH DIG @CMD_EXT_U@ "August 30, 1990" .SH NAME dig \- send domain name query packets to name servers .SH SYNOPSIS .B dig .RI [ @\fIserver\fP ] .I domain .RI [ "" ] .RI [ "" ] .RI [ "+" ] .RI [ "\-" ] .RI [ "%comment" ] .SH DESCRIPTION \fIDig\fP (domain information groper) is a flexible command line tool which can be used to gather information from the Domain Name System servers. \fIDig\fP has two modes: simple interactive mode which makes a single query, and batch which executes a query for each in a list of several query lines. All query options are accessible from the command line. .PP The usual simple use of \fIdig\fP will take the form: .sp 1 dig @server domain query-type query-class .sp 1 where: .IP \fIserver\fP may be either a domain name or a dot-notation Internet address. If this optional field is omitted, \fIdig\fP will attempt to use the default name server for your machine. .sp 1 \fBNote:\fP If a domain name is specified, this will be resolved using the domain name system resolver (i.e., BIND). If your system does not support DNS, you may \fIhave\fP to specify a dot-notation address. Alternatively, if there is a server at your disposal somewhere, all that is required is that /etc/resolv.conf be present and indicate where the default name servers reside, so that \fIserver\fP itself can be resolved. See .IR resolver (@FORMAT_EXT@) for information on /etc/resolv.conf. (WARNING: Changing /etc/resolv.conf will affect the standard resolver library and potentially several programs which use it.) As an option, the user may set the environment variable LOCALRES to name a file which is to be used instead of /etc/resolv.conf (LOCALRES is specific to the \fIdig\fP resolver and not referenced by the standard resolver). If the LOCALRES variable is not set or the file is not readable then /etc/resolv.conf will be used. .IP \fIdomain\fP is the domain name for which you are requesting information. See OPTIONS [-x] for convenient way to specify inverse address query. .IP \fIquery-type\fP is the type of information (DNS query type) that you are requesting. If omitted, the default is "a" (T_A = address). The following types are recognized: .sp 1 .ta \w'hinfoXX'u +\w'T_HINFOXX'u .nf a T_A network address any T_ANY all/any information about specified domain mx T_MX mail exchanger for the domain ns T_NS name servers soa T_SOA zone of authority record hinfo T_HINFO host information axfr T_AXFR zone transfer (must ask an authoritative server) txt T_TXT arbitrary number of strings .fi .sp 1 (See RFC 1035 for the complete list.) .IP \fIquery-class\fP is the network class requested in the query. If omitted, the default is "in" (C_IN = Internet). The following classes are recognized: .sp 1 .ta \w'hinfoXX'u +\w'T_HINFOXX'u .nf in C_IN Internet class domain any C_ANY all/any class information .fi .sp 1 (See RFC 1035 for the complete list.) .sp 1 \fBNote:\fP "Any" can be used to specify a class and/or a type of query. \fIDig\fP will parse the first occurrence of "any" to mean query-type = T_ANY. To specify query-class = C_ANY you must either specify "any" twice, or set query-class using "\-c" option (see below). .SH OTHER OPTIONS .IP "%ignored-comment" "%" is used to included an argument that is simply not parsed. This may be useful if running \fIdig\fP in batch mode. Instead of resolving every @server-domain-name in a list of queries, you can avoid the overhead of doing so, and still have the domain name on the command line as a reference. Example: .sp 1 dig @128.9.0.32 %venera.isi.edu mx isi.edu .sp 1 .IP "\-" "\-" is used to specify an option which effects the operation of \fIdig\fP. The following options are currently available (although not guaranteed to be useful): .RS .IP "\-x \fIdot-notation-address\fP" Convenient form to specify inverse address mapping. Instead of "dig 32.0.9.128.in-addr.arpa" one can simply "dig -x 128.9.0.32". .IP "\-f \fIfile\fP" File for \fIdig\fP batch mode. The file contains a list of query specifications (\fIdig\fP command lines) which are to be executed successively. Lines beginning with ';', '#', or '\\n' are ignored. Other options may still appear on command line, and will be in effect for each batch query. .IP "\-T \fItime\fP" Time in seconds between start of successive queries when running in batch mode. Can be used to keep two or more batch \fIdig\fP commands running roughly in sync. Default is zero. .IP "\-p \fIport\fP" Port number. Query a name server listening to a non-standard port number. Default is 53. .IP "\-P[\fIping-string\fP]" After query returns, execute a .IR ping (@SYS_OPS_EXT@) command for response time comparison. This rather unelegantly makes a call to the shell. The last three lines of statistics is printed for the command: .sp 1 ping \-s server_name 56 3 .sp 1 If the optional "ping string" is present, it replaces "ping \-s" in the shell command. .IP "\-t \fIquery-type\fP" Specify type of query. May specify either an integer value to be included in the type field or use the abbreviated mnemonic as discussed above (i.e., mx = T_MX). .IP "\-c \fIquery-class\fP" Specify class of query. May specify either an integer value to be included in the class field or use the abbreviated mnemonic as discussed above (i.e., in = C_IN). .IP "\-envsav" This flag specifies that the \fIdig\fP environment (defaults, print options, etc.), after all of the arguments are parsed, should be saved to a file to become the default environment. Useful if you do not like the standard set of defaults and do not desire to include a large number of options each time \fIdig\fP is used. The environment consists of resolver state variable flags, timeout, and retries as well as the flags detailing \fIdig\fP output (see below). If the shell environment variable LOCALDEF is set to the name of a file, this is where the default \fIdig\fP environment is saved. If not, the file "DiG.env" is created in the current working directory. .sp 1 \fBNote:\fP LOCALDEF is specific to the \fIdig\fP resolver, and will not affect operation of the standard resolver library. .sp 1 Each time \fIdig\fP is executed, it looks for "./DiG.env" or the file specified by the shell environment variable LOCALDEF. If such file exists and is readable, then the environment is restored from this file before any arguments are parsed. .IP "\-envset" This flag only affects batch query runs. When "\-envset" is specified on a line in a \fIdig\fP batch file, the \fIdig\fP environment after the arguments are parsed, becomes the default environment for the duration of the batch file, or until the next line which specifies "\-envset". .IP "\-[no]stick" This flag only affects batch query runs. It specifies that the \fIdig\fP environment (as read initially or set by "\-envset" switch) is to be restored before each query (line) in a \fIdig\fP batch file. The default "\-nostick" means that the \fIdig\fP environment does not stick, hence options specified on a single line in a \fIdig\fP batch file will remain in effect for subsequent lines (i.e. they are not restored to the "sticky" default). .RE .IP "+" "+" is used to specify an option to be changed in the query packet or to change \fIdig\fP output specifics. Many of these are the same parameters accepted by .IR nslookup (@SYS_OPS_EXT@). If an option requires a parameter, the form is as follows: .sp 1 +keyword[=value] .sp 1 Most keywords can be abbreviated. Parsing of the "+" options is very simplistic \(em a value must not be separated from its keyword by white space. The following keywords are currently available: .sp 1 .nf .ta \w'domain=NAMEXX'u +\w'(deb)XXX'u Keyword Abbrev. Meaning [default] [no]debug (deb) turn on/off debugging mode [deb] [no]d2 turn on/off extra debugging mode [nod2] [no]recurse (rec) use/don't use recursive lookup [rec] retry=# (ret) set number of retries to # [4] time=# (ti) set timeout length to # seconds [4] [no]ko keep open option (implies vc) [noko] [no]vc use/don't use virtual circuit [novc] [no]defname (def) use/don't use default domain name [def] [no]search (sea) use/don't use domain search list [sea] domain=NAME (do) set default domain name to NAME [no]ignore (i) ignore/don't ignore trunc. errors [noi] [no]primary (pr) use/don't use primary server [nopr] [no]aaonly (aa) authoritative query only flag [noaa] [no]sort (sor) sort resource records [nosor] [no]cmd echo parsed arguments [cmd] [no]stats (st) print query statistics [st] [no]Header (H) print basic header [H] [no]header (he) print header flags [he] [no]ttlid (tt) print TTLs [tt] [no]cl print class info [nocl] [no]qr print outgoing query [noqr] [no]reply (rep) print reply [rep] [no]ques (qu) print question section [qu] [no]answer (an) print answer section [an] [no]author (au) print authoritative section [au] [no]addit (ad) print additional section [ad] pfdef set to default print flags pfmin set to minimal default print flags pfset=# set print flags to # (# can be hex/octal/decimal) pfand=# bitwise and print flags with # pfor=# bitwise or print flags with # .fi .sp 1 The retry and time options affect the retransmission strategy used by resolver library when sending datagram queries. The algorithm is as follows: .sp 1 .in +5n .nf for i = 0 to retry \- 1 for j = 1 to num_servers send_query wait((time * (2**i)) / num_servers) end end .fi .in -5n .sp 1 (Note: \fIdig\fP always uses a value of 1 for num_servers.) .SH DETAILS \fIDig\fP once required a slightly modified version of the BIND .IR resolver (@LIB_NETWORK_EXT@) library. BIND's resolver has (as of BIND 4.9) been augmented to work properly with \fIDig\fP. Essentially, \fIDig\fP is a straight-forward (albeit not pretty) effort of parsing arguments and setting appropriate parameters. \fIDig\fP uses resolver routines res_init(), res_mkquery(), res_send() as well as accessing _res structure. .SH FILES .ta \w'/etc/resolv.confXX'u /etc/resolv.conf initial domain name and name server \./DiG.env default save file for default options .br addresses .SH ENVIRONMENT LOCALRES file to use in place of /etc/resolv.conf .br LOCALDEF default environment file .SH AUTHOR Steve Hotz hotz@isi.edu .SH ACKNOWLEDGMENTS \fIDig\fP uses functions from .IR nslookup (@SYS_OPS_EXT@) authored by Andrew Cherenson. .SH BUGS \fIDig\fP has a serious case of "creeping featurism" -- the result of considering several potential uses during it's development. It would probably benefit from a rigorous diet. Similarly, the print flags and granularity of the items they specify make evident their rather ad hoc genesis. .PP \fIDig\fP does not consistently exit nicely (with appropriate status) when a problem occurs somewhere in the resolver (NOTE: most of the common exit cases are handled). This is particularly annoying when running in batch mode. If it exits abnormally (and is not caught), the entire batch aborts; when such an event is trapped, \fIdig\fP simply continues with the next query. .SH SEE ALSO @INDOT@named(@SYS_OPS_EXT@), resolver(@LIB_NETWORK_EXT@), resolver(@FORMAT_EXT@), nslookup(@SYS_OPS_EXT@)