.TH "NSD" "8" "May 14, 2018" "NLnet Labs" "NSD 4.1.21"
.\" Copyright (c) 2001\-2008, NLnet Labs. All rights reserved.
.\" See LICENSE for the license.
.SH "NAME"
.B nsd
\- Name Server Daemon (NSD) version 4.1.21.
.SH "SYNOPSIS"
.B nsd
.RB [ \-4 ] 
.RB [ \-6 ] 
.RB [ \-a 
.IR ip\-address[@port] ]
.RB [ \-c
.IR configfile ]
.RB [ \-d ] 
.RB [ \-f
.IR database ]
.RB [ \-h ] 
.RB [ \-i
.IR identity ]
.RB [ \-I
.IR nsid ]
.RB [ \-l
.IR logfile ]
.RB [ \-N
.IR server\-count ]
.RB [ \-n
.IR noncurrent\-tcp\-count ]
.RB [ \-P
.IR pidfile ]
.RB [ \-p
.IR port ]
.RB [ \-s
.IR seconds ]
.RB [ \-t
.IR chrootdir ]
.RB [ \-u
.IR username ]
.RB [ \-V
.IR level ]
.RB [ \-v ]
.SH "DESCRIPTION"
.B NSD
is a complete implementation of an authoritative DNS nameserver. 
Upon startup,
.B NSD
will read the database specified with 
.B \-f
.I database
argument and put itself into background and answers queries on port 
53 or a different port specified with 
.B \-p
.I port
option. The
.I database
is created if it does not exist. By default,
.B NSD 
will bind to all local interfaces available. Use the 
.B \-a
.I ip\-address[@port]
option to specify a single particular interface address to be
bound. If this option is given more than once,
.B NSD
will bind its UDP and TCP sockets to all the specified ip\-addresses
separately. If IPv6 is enabled when 
.B NSD 
is compiled an IPv6 address can also be specified.
.P
.SH "OPTIONS"
All the options can be specified in the configfile (
.B \-c 
argument), except for the 
.B \-v 
and 
.B \-h 
options. If options are specified on the commandline, the options 
on the commandline take precedence over the options in the 
configfile.
.P
Normally
.B NSD
should be started with the `nsd\-control(8) start` command invoked from a
.I /etc/rc.d/nsd.sh
script or similar at the operating system startup.
.TP
.B \-4
Only listen to IPv4 connections.
.TP
.B \-6
Only listen to IPv6 connections.
.TP
.B \-a\fI ip\-address[@port]
Listen to the specified
.IR ip\-address .
The
.I ip\-address
must be specified in numeric format (using the standard IPv4 or IPv6
notation). Optionally, a port number can be given.
This flag can be specified multiple times to listen to
multiple IP addresses. If this flag is not specified, 
.B NSD
listens to the wildcard interface.
.TP
.B \-c\fI configfile
Read specified 
.I configfile
instead of the default
.IR @nsdconfigfile@ .
For format description see nsd.conf(5).
.TP
.B \-d
Do not fork, stay in the foreground.
.TP
.B \-f\fI database
Use the specified
.I database
instead of the default of
.IR '@dbfile@' .
If a 
.B zonesdir: 
is specified in the config file this path can be relative to that 
directory.
.TP
.B \-h
Print help information and exit.
.TP
.B \-i\fI identity
Return the specified
.I identity
when asked for
.I CH TXT ID.SERVER
(This option is used to determine which server is answering the queries
when they are anycast). The default is the name returned by gethostname(3).
.TP
.B \-I\fI nsid
Add the specified
.I nsid
to the EDNS section of the answer when queried with an NSID EDNS 
enabled packet.  As a sequence of hex characters or with ascii_ prefix
and then an ascii string.
.TP
.B \-l\fI logfile
Log messages to the specified 
.IR logfile .
The default is to log to stderr and syslog. If a 
.B zonesdir: 
is specified in the config file this path can be relative to that 
directory.
.TP
.B \-N\fI count
Start
.I count
.B NSD 
servers. The default is 1. Starting more than a single server is 
only useful on machines with multiple CPUs and/or network adapters. 
.TP
.B \-n\fI number
The maximum
.I number
of concurrent TCP connection that can be handled by each server. The
default is 100.
.TP
.B \-P\fI pidfile
Use the specified
.I pidfile
instead of the platform specific default, which is mostly
.IR @pidfile@ .
If a 
.B zonesdir: 
is specified in the config file, this path can be relative to that 
directory.
.TP
.B \-p\fI port
Answer the queries on the specified
.IR port .
Normally this is port 53.
.TP
.B \-s\fI seconds
Produce statistics dump every 
.I seconds
seconds. This is equal to sending
.I SIGUSR1
to the daemon periodically.
.TP
.B \-t\fI chroot
Specifies a directory to 
.I chroot 
to upon startup. This option requires you to ensure that appropriate 
syslogd(8) socket (e.g.
.I chrootdir 
/dev/log) is available, otherwise
.B NSD
won't produce any log output.
.TP
.B \-u\fI username
Drop user and group privileges to those of
.I username
after binding the socket.
The
.I username
must be one of: username, id, or id.gid. For example: nsd, 80, or 
80.80.
.TP
.B \-V\fI level
This value specifies the verbosity level for (non\-debug) logging. 
Default is 0.
.TP
.B \-v
Print the version number of 
.B NSD 
to standard error and exit.
.LP
.B NSD
reacts to the following signals:
.TP
SIGTERM
Stop answering queries, shutdown, and exit normally.
.TP 
SIGHUP
Reload.  Scans zone files and if changed (mtime) reads
them in.  Also reopens the logfile (assists logrotation).
.TP
SIGUSR1
Dump BIND8\-style statistics into the log. Ignored otherwise.
.SH "FILES"
.TP
"@dbfile@"
default
.B NSD
database
.TP
@pidfile@
the process id of the name server.
.TP
@nsdconfigfile@
default
.B NSD
configuration file
.SH "DIAGNOSTICS"
.B NSD
will log all the problems via the standard syslog(8)
.I daemon
facility, unless the
.B \-d
option is specified.
.SH "SEE ALSO"
\fInsd.conf\fR(5), \fInsd\-checkconf\fR(8), \fInsd\-control\fR(8)
.SH "AUTHORS"
.B NSD
was written by NLnet Labs and RIPE NCC joint team. Please see
CREDITS file in the distribution for further details.