/* $OpenBSD: upap.c,v 1.3 1996/07/20 12:02:14 joshd Exp $ */ /* * upap.c - User/Password Authentication Protocol. * * Copyright (c) 1989 Carnegie Mellon University. * All rights reserved. * * Redistribution and use in source and binary forms are permitted * provided that the above copyright notice and this paragraph are * duplicated in all such forms and that any documentation, * advertising materials, and other materials related to such * distribution and use acknowledge that the software was developed * by Carnegie Mellon University. The name of the * University may not be used to endorse or promote products derived * from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ #ifndef lint static char rcsid[] = "$OpenBSD: upap.c,v 1.3 1996/07/20 12:02:14 joshd Exp $"; #endif /* * TODO: */ #include #include #include #include #include #include "pppd.h" #include "upap.h" /* * Protocol entry points. */ static void upap_init __P((int)); static void upap_lowerup __P((int)); static void upap_lowerdown __P((int)); static void upap_input __P((int, u_char *, int)); static void upap_protrej __P((int)); static int upap_printpkt __P((u_char *, int, void (*) __P((void *, char *, ...)), void *)); struct protent pap_protent = { PPP_PAP, upap_init, upap_input, upap_protrej, upap_lowerup, upap_lowerdown, NULL, NULL, upap_printpkt, NULL, 1, "PAP", NULL, NULL, NULL }; upap_state upap[NUM_PPP]; /* UPAP state; one for each unit */ static void upap_timeout __P((caddr_t)); static void upap_reqtimeout __P((caddr_t)); static void upap_rauthreq __P((upap_state *, u_char *, int, int)); static void upap_rauthack __P((upap_state *, u_char *, int, int)); static void upap_rauthnak __P((upap_state *, u_char *, int, int)); static void upap_sauthreq __P((upap_state *)); static void upap_sresp __P((upap_state *, int, int, char *, int)); /* * upap_init - Initialize a UPAP unit. */ static void upap_init(unit) int unit; { upap_state *u = &upap[unit]; u->us_unit = unit; u->us_user = NULL; u->us_userlen = 0; u->us_passwd = NULL; u->us_passwdlen = 0; u->us_clientstate = UPAPCS_INITIAL; u->us_serverstate = UPAPSS_INITIAL; u->us_id = 0; u->us_timeouttime = UPAP_DEFTIMEOUT; u->us_maxtransmits = 10; u->us_reqtimeout = UPAP_DEFREQTIME; } /* * upap_authwithpeer - Authenticate us with our peer (start client). * * Set new state and send authenticate's. */ void upap_authwithpeer(unit, user, password) int unit; char *user, *password; { upap_state *u = &upap[unit]; /* Save the username and password we're given */ u->us_user = user; u->us_userlen = strlen(user); u->us_passwd = password; u->us_passwdlen = strlen(password); u->us_transmits = 0; /* Lower layer up yet? */ if (u->us_clientstate == UPAPCS_INITIAL || u->us_clientstate == UPAPCS_PENDING) { u->us_clientstate = UPAPCS_PENDING; return; } upap_sauthreq(u); /* Start protocol */ } /* * upap_authpeer - Authenticate our peer (start server). * * Set new state. */ void upap_authpeer(unit) int unit; { upap_state *u = &upap[unit]; /* Lower layer up yet? */ if (u->us_serverstate == UPAPSS_INITIAL || u->us_serverstate == UPAPSS_PENDING) { u->us_serverstate = UPAPSS_PENDING; return; } u->us_serverstate = UPAPSS_LISTEN; if (u->us_reqtimeout > 0) TIMEOUT(upap_reqtimeout, (caddr_t) u, u->us_reqtimeout); } /* * upap_timeout - Retransmission timer for sending auth-reqs expired. */ static void upap_timeout(arg) caddr_t arg; { upap_state *u = (upap_state *) arg; if (u->us_clientstate != UPAPCS_AUTHREQ) return; if (u->us_transmits >= u->us_maxtransmits) { /* give up in disgust */ syslog(LOG_ERR, "No response to PAP authenticate-requests"); u->us_clientstate = UPAPCS_BADAUTH; auth_withpeer_fail(u->us_unit, PPP_PAP); return; } upap_sauthreq(u); /* Send Authenticate-Request */ } /* * upap_reqtimeout - Give up waiting for the peer to send an auth-req. */ static void upap_reqtimeout(arg) caddr_t arg; { upap_state *u = (upap_state *) arg; if (u->us_serverstate != UPAPSS_LISTEN) return; /* huh?? */ auth_peer_fail(u->us_unit, PPP_PAP); u->us_serverstate = UPAPSS_BADAUTH; } /* * upap_lowerup - The lower layer is up. * * Start authenticating if pending. */ static void upap_lowerup(unit) int unit; { upap_state *u = &upap[unit]; if (u->us_clientstate == UPAPCS_INITIAL) u->us_clientstate = UPAPCS_CLOSED; else if (u->us_clientstate == UPAPCS_PENDING) { upap_sauthreq(u); /* send an auth-request */ } if (u->us_serverstate == UPAPSS_INITIAL) u->us_serverstate = UPAPSS_CLOSED; else if (u->us_serverstate == UPAPSS_PENDING) { u->us_serverstate = UPAPSS_LISTEN; if (u->us_reqtimeout > 0) TIMEOUT(upap_reqtimeout, (caddr_t) u, u->us_reqtimeout); } } /* * upap_lowerdown - The lower layer is down. * * Cancel all timeouts. */ static void upap_lowerdown(unit) int unit; { upap_state *u = &upap[unit]; if (u->us_clientstate == UPAPCS_AUTHREQ) /* Timeout pending? */ UNTIMEOUT(upap_timeout, (caddr_t) u); /* Cancel timeout */ if (u->us_serverstate == UPAPSS_LISTEN && u->us_reqtimeout > 0) UNTIMEOUT(upap_reqtimeout, (caddr_t) u); u->us_clientstate = UPAPCS_INITIAL; u->us_serverstate = UPAPSS_INITIAL; } /* * upap_protrej - Peer doesn't speak this protocol. * * This shouldn't happen. In any case, pretend lower layer went down. */ static void upap_protrej(unit) int unit; { upap_state *u = &upap[unit]; if (u->us_clientstate == UPAPCS_AUTHREQ) { syslog(LOG_ERR, "PAP authentication failed due to protocol-reject"); auth_withpeer_fail(unit, PPP_PAP); } if (u->us_serverstate == UPAPSS_LISTEN) { syslog(LOG_ERR, "PAP authentication of peer failed (protocol-reject)"); auth_peer_fail(unit, PPP_PAP); } upap_lowerdown(unit); } /* * upap_input - Input UPAP packet. */ static void upap_input(unit, inpacket, l) int unit; u_char *inpacket; int l; { upap_state *u = &upap[unit]; u_char *inp; u_char code, id; int len; /* * Parse header (code, id and length). * If packet too short, drop it. */ inp = inpacket; if (l < UPAP_HEADERLEN) { UPAPDEBUG((LOG_INFO, "upap_input: rcvd short header.")); return; } GETCHAR(code, inp); GETCHAR(id, inp); GETSHORT(len, inp); if (len < UPAP_HEADERLEN) { UPAPDEBUG((LOG_INFO, "upap_input: rcvd illegal length.")); return; } if (len > l) { UPAPDEBUG((LOG_INFO, "upap_input: rcvd short packet.")); return; } len -= UPAP_HEADERLEN; /* * Action depends on code. */ switch (code) { case UPAP_AUTHREQ: upap_rauthreq(u, inp, id, len); break; case UPAP_AUTHACK: upap_rauthack(u, inp, id, len); break; case UPAP_AUTHNAK: upap_rauthnak(u, inp, id, len); break; default: /* XXX Need code reject */ break; } } /* * upap_rauth - Receive Authenticate. */ static void upap_rauthreq(u, inp, id, len) upap_state *u; u_char *inp; int id; int len; { u_char ruserlen, rpasswdlen; char *ruser, *rpasswd; int retcode; char *msg; int msglen; UPAPDEBUG((LOG_INFO, "upap_rauth: Rcvd id %d.", id)); if (u->us_serverstate < UPAPSS_LISTEN) return; /* * If we receive a duplicate authenticate-request, we are * supposed to return the same status as for the first request. */ if (u->us_serverstate == UPAPSS_OPEN) { upap_sresp(u, UPAP_AUTHACK, id, "", 0); /* return auth-ack */ return; } if (u->us_serverstate == UPAPSS_BADAUTH) { upap_sresp(u, UPAP_AUTHNAK, id, "", 0); /* return auth-nak */ return; } /* * Parse user/passwd. */ if (len < sizeof (u_char)) { UPAPDEBUG((LOG_INFO, "upap_rauth: rcvd short packet.")); return; } GETCHAR(ruserlen, inp); len -= sizeof (u_char) + ruserlen + sizeof (u_char); if (len < 0) { UPAPDEBUG((LOG_INFO, "upap_rauth: rcvd short packet.")); return; } ruser = (char *) inp; INCPTR(ruserlen, inp); GETCHAR(rpasswdlen, inp); if (len < rpasswdlen) { UPAPDEBUG((LOG_INFO, "upap_rauth: rcvd short packet.")); return; } rpasswd = (char *) inp; /* * Check the username and password given. */ retcode = check_passwd(u->us_unit, ruser, ruserlen, rpasswd, rpasswdlen, &msg, &msglen); BZERO(rpasswd, rpasswdlen); upap_sresp(u, retcode, id, msg, msglen); if (retcode == UPAP_AUTHACK) { u->us_serverstate = UPAPSS_OPEN; auth_peer_success(u->us_unit, PPP_PAP, ruser, ruserlen); } else { u->us_serverstate = UPAPSS_BADAUTH; auth_peer_fail(u->us_unit, PPP_PAP); } if (u->us_reqtimeout > 0) UNTIMEOUT(upap_reqtimeout, (caddr_t) u); } /* * upap_rauthack - Receive Authenticate-Ack. */ static void upap_rauthack(u, inp, id, len) upap_state *u; u_char *inp; int id; int len; { u_char msglen; char *msg; UPAPDEBUG((LOG_INFO, "upap_rauthack: Rcvd id %d.", id)); if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */ return; /* * Parse message. */ if (len < sizeof (u_char)) { UPAPDEBUG((LOG_INFO, "upap_rauthack: rcvd short packet.")); return; } GETCHAR(msglen, inp); len -= sizeof (u_char); if (len < msglen) { UPAPDEBUG((LOG_INFO, "upap_rauthack: rcvd short packet.")); return; } msg = (char *) inp; PRINTMSG(msg, msglen); u->us_clientstate = UPAPCS_OPEN; auth_withpeer_success(u->us_unit, PPP_PAP); } /* * upap_rauthnak - Receive Authenticate-Nakk. */ static void upap_rauthnak(u, inp, id, len) upap_state *u; u_char *inp; int id; int len; { u_char msglen; char *msg; UPAPDEBUG((LOG_INFO, "upap_rauthnak: Rcvd id %d.", id)); if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */ return; /* * Parse message. */ if (len < sizeof (u_char)) { UPAPDEBUG((LOG_INFO, "upap_rauthnak: rcvd short packet.")); return; } GETCHAR(msglen, inp); len -= sizeof (u_char); if (len < msglen) { UPAPDEBUG((LOG_INFO, "upap_rauthnak: rcvd short packet.")); return; } msg = (char *) inp; PRINTMSG(msg, msglen); u->us_clientstate = UPAPCS_BADAUTH; syslog(LOG_ERR, "PAP authentication failed"); auth_withpeer_fail(u->us_unit, PPP_PAP); } /* * upap_sauthreq - Send an Authenticate-Request. */ static void upap_sauthreq(u) upap_state *u; { u_char *outp; int outlen; outlen = UPAP_HEADERLEN + 2 * sizeof (u_char) + u->us_userlen + u->us_passwdlen; outp = outpacket_buf; MAKEHEADER(outp, PPP_PAP); PUTCHAR(UPAP_AUTHREQ, outp); PUTCHAR(++u->us_id, outp); PUTSHORT(outlen, outp); PUTCHAR(u->us_userlen, outp); BCOPY(u->us_user, outp, u->us_userlen); INCPTR(u->us_userlen, outp); PUTCHAR(u->us_passwdlen, outp); BCOPY(u->us_passwd, outp, u->us_passwdlen); output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN); UPAPDEBUG((LOG_INFO, "upap_sauth: Sent id %d.", u->us_id)); TIMEOUT(upap_timeout, (caddr_t) u, u->us_timeouttime); ++u->us_transmits; u->us_clientstate = UPAPCS_AUTHREQ; } /* * upap_sresp - Send a response (ack or nak). */ static void upap_sresp(u, code, id, msg, msglen) upap_state *u; u_char code, id; char *msg; int msglen; { u_char *outp; int outlen; outlen = UPAP_HEADERLEN + sizeof (u_char) + msglen; outp = outpacket_buf; MAKEHEADER(outp, PPP_PAP); PUTCHAR(code, outp); PUTCHAR(id, outp); PUTSHORT(outlen, outp); PUTCHAR(msglen, outp); BCOPY(msg, outp, msglen); output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN); UPAPDEBUG((LOG_INFO, "upap_sresp: Sent code %d, id %d.", code, id)); } /* * upap_printpkt - print the contents of a PAP packet. */ static char *upap_codenames[] = { "AuthReq", "AuthAck", "AuthNak" }; static int upap_printpkt(p, plen, printer, arg) u_char *p; int plen; void (*printer) __P((void *, char *, ...)); void *arg; { int code, id, len; int mlen, ulen, wlen; char *user, *pwd, *msg; u_char *pstart; if (plen < UPAP_HEADERLEN) return 0; pstart = p; GETCHAR(code, p); GETCHAR(id, p); GETSHORT(len, p); if (len < UPAP_HEADERLEN || len > plen) return 0; if (code >= 1 && code <= sizeof(upap_codenames) / sizeof(char *)) printer(arg, " %s", upap_codenames[code-1]); else printer(arg, " code=0x%x", code); printer(arg, " id=0x%x", id); len -= UPAP_HEADERLEN; switch (code) { case UPAP_AUTHREQ: if (len < 1) break; ulen = p[0]; if (len < ulen + 2) break; wlen = p[ulen + 1]; if (len < ulen + wlen + 2) break; user = (char *) (p + 1); pwd = (char *) (p + ulen + 2); p += ulen + wlen + 2; len -= ulen + wlen + 2; printer(arg, " user="); print_string(user, ulen, printer, arg); printer(arg, " password="); print_string(pwd, wlen, printer, arg); break; case UPAP_AUTHACK: case UPAP_AUTHNAK: if (len < 1) break; mlen = p[0]; if (len < mlen + 1) break; msg = (char *) (p + 1); p += mlen + 1; len -= mlen + 1; printer(arg, "msg="); print_string(msg, mlen, printer, arg); break; } /* print the rest of the bytes in the packet */ for (; len > 0; --len) { GETCHAR(code, p); printer(arg, " %.2x", code); } return p - pstart; }