.\" $OpenBSD: procmap.1,v 1.25 2022/10/22 06:39:12 jmc Exp $ .\" $NetBSD: pmap.1,v 1.6 2003/01/19 21:25:43 atatat Exp $ .\" .\" Copyright (c) 2002 The NetBSD Foundation, Inc. .\" All rights reserved. .\" .\" This code is derived from software contributed to The NetBSD Foundation .\" by Andrew Brown. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS .\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED .\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR .\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" .Dd $Mdocdate: October 22 2022 $ .Dt PROCMAP 1 .Os .Sh NAME .Nm procmap .Nd display process memory map .Sh SYNOPSIS .Nm .Op Fl AadlmPsv .Op Fl D Ar number .Op Fl M Ar core .Op Fl N Ar system .Op Fl p Ar pid .Op Ar pid ... .Sh DESCRIPTION The .Nm utility lists the virtual memory mappings underlying the given process. The start address of each entry is always given and, depending on the options given, other information such as the end address, the underlying file's device and inode numbers, and various protection information will be displayed, along with the path to the file, if such data is available. The various output formats are explained in greater detail below. .Pp .Nm requires the ability to open .Pa /dev/kmem which may be restricted based upon the value of the .Ar kern.allowkmem .Xr sysctl 8 . .Pp By default, .Nm displays information for its parent process, so that when run from a shell prompt, the shell's memory information is displayed. If other PIDs are given as arguments on the command line, information for those processes will be printed also. If the special PID of 0 is given, then information for the kernel's memory map is printed. .Pp The options are as follows: .Bl -tag -width XXXnumberXX .It Fl A Print more detailed information on anonymous map usage. .It Fl a Display .Dq all information from the process's memory map. This output mode is an amalgam of the contents of the Solaris, Linux, and .Ox style output modes. .It Fl D Ar number Enable various debug facilities. The .Ar number is a bit mask of the values: .Pp .Bl -tag -width flag -compact .It Cm 1 dump the process's vmspace structure .It Cm 2 dump the process's vm_map structure .It Cm 4 dump the vm_map.header structure .It Cm 8 dump each vm_map_entry in its entirety .It Cm 16 dump the namei cache as it is traversed .El .It Fl d Dumps the vm_map and vm_map_entry structures in a style similar to that of .Xr ddb 4 . When combined with the .Fl v option, the device number, inode number, name, vnode addresses, or other identifying information from the vm_map_entry fields will be printed. .It Fl l Dumps information in a format like the contents of the maps pseudo-file under the .Pa /proc file system which was, in turn, modeled after the similarly named entry in the Linux .Pa /proc file system. When combined with the .Fl v option, identifiers for all entries are printed. .It Fl M Ar core Extract values associated with the name list from the specified core instead of the default .Pa /dev/kmem . .It Fl m Dumps information in the same format as the map pseudo-file of the .Pa /proc file system. When the .Fl v option is also given, device number, inode number, and filename or other identifying information is printed. .It Fl N Ar system Extract the name list from the specified system instead of the running kernel. .It Fl P Causes .Nm to print information about itself. .It Fl p Ar pid Tells .Nm to print information about the given process. If .Fl p Ar pid occurs last on the command line, the .Fl p is optional. .\" .It Fl R .\" Recurse into submaps. .\" In some cases, a vm_map_entry in the kernel .\" will point to a submap. .\" Using this flag tells .\" .Nm .\" to print the entries of the submap as well. .\" The submap output is .\" indented, and does not affect any total printed at the bottom of the .\" output. .It Fl s The Solaris style output format, modeled after the Solaris command .Dq pmap . This is the default output style. .It Fl v Verbose output. When used with .Fl d , .Fl l , or .Fl m , more information is printed, possibly including device and inode numbers, file path names, or other identifying information. If used with .Fl a , a line marked with .Sq * will be printed in between two entries that are not adjacent, making the visual identification of spaces in the process's map easier to see. .El .Pp The .Fl P and .Fl p options override each other, so the last one to appear on the command line takes effect. To see information about .Nm and another process at the same time, simply omit the .Fl p and place the extra PID at the end of the command line. .Sh OUTPUT FORMAT While the meaning of most of the output is self-evident, some pieces of it may appear to be a little inscrutable. .Pp Here a portion of the default output from .Nm being run at a .Xr sh 1 prompt shows the starting address of the map entry, the size of the map entry, the current protection level of the map entry, and either the name of the file backing the entry or some other descriptive text. .Bd -literal -offset indent # procmap 08048000 420K read/exec /bin/sh 080B1000 8K read/write /bin/sh 080B3000 28K read/write [ anon ] 080BA000 16K read/write/exec [ heap ] \&... .Ed .Pp When the .Xr ddb 4 output style is selected, the first thing printed is the contents of the vm_map structure, followed by the individual map entries. .Bd -literal -offset indent # procmap -d MAP 0xcf7cac84: [0x0-\*(Gt0xbfbfe000] #ent=8, sz=34041856, ref=1, version=20, flags=0x21 pmap=0xcf44cee0(resident=\*(Ltunknown\*(Gt) - 0xcfa3a358: 0x8048000-\*(Gt0x80b1000: obj=0xcf45a8e8/0x0, amap=0x0/0 submap=F, cow=T, nc=T, stack=F, syscall=F, immutable=F, prot(max)=5/7, inh=1, wc=0, adv=0 \&... .Ed .Pp The value of the flags field (in hexadecimal) is taken from the include file .In uvm/uvm_map.h : .Bd -literal -offset indent VM_MAP_PAGEABLE 0x01 ro: entries are pageable VM_MAP_INTRSAFE 0x02 ro: interrupt safe map VM_MAP_WIREFUTURE 0x04 rw: wire future mappings VM_MAP_BUSY 0x08 rw: map is busy VM_MAP_WANTLOCK 0x10 rw: want to write-lock .Ed .Pp The .Dq prot (or protection) field, along with .Dq max (maximum protection allowed), are made up of the following flags from .In uvm/uvm_extern.h : .\" this column width specifically chosen so that all the header file .\" excerpts appear to line up cleanly .Bd -literal -offset indent PROT_READ 0x01 read allowed PROT_WRITE 0x02 write allowed PROT_EXEC 0x04 execute allowed .Ed .Pp The .Dq obj and .Dq amap fields are pointers to, and offsets into, the underlying uvm_object or vm_amap object. The value for resident is always unknown because digging such information out of the kernel is beyond the scope of this application. .Pp The two output styles that mirror the contents of the .Pa /proc file system appear as follows: .Bd -literal -offset indent # procmap -m 0x8048000 0x80b1000 r-x--I rwx COW NC 1 0 0 0xdecf000 0xd018000 r-x--I rwx COW NC 1 0 0 0x80b1000 0x80b3000 rw---I rwx COW NC 1 0 0 0x80b3000 0x80ba000 rw---I rwx COW NNC 1 0 0 0x80ba000 0x80be000 rwx--I rwx COW NNC 1 0 0 \&... # procmap -l 0x08048000 0x080b1000 r-x--Ip 00000000 00:00 70173 /bin/sh 0x080b1000 0x080b3000 rw---Ip 00068000 00:00 70173 /bin/sh 0x080b3000 0x080ba000 rw---Ip 00000000 00:00 0 \&... .Ed .Pp Here the protection and maximum protection values are indicated with .Sq r , .Sq w , and .Sq x characters, indicating read permission, write permission, and execute permission, respectively. The remaining fields of this column are described below. The .Dq COW , .Dq NC , and .Dq NNC values that follow indicate, again, that the map is marked for copy on write and either needs or does not need a copy. It is also possible to see the value .Dq NCOW here, which indicates that an entry will not be copied. The three following numbers indicate the inheritance type of the map, the wired count of the map, and any advice value assigned via .Xr madvise 2 . .Pp In the second form, the permissions indicated are followed by a .Sq p or .Sq s character indicating whether the map entry is private or shared (copy on write or not), and the numbers are the offset into the underlying object, the device and numbers of the object if it is a file, and the path to the file (if available). .Pp As noted above, the .Dq all output format is an amalgam of the previous output formats. .Bd -literal -offset indent # procmap -a Start End Size Offset rwxSeIpc RWX I/W/A ... 08048000-080b0fff 420k 00000000 r-x---p+ (rwx) 1/0/0 ... \&... .Ed .Pp In this format the column labeled .Dq rwxSeIpc comprises: .Pp .Bl -tag -width Ds -offset indent -compact .It rwx permissions for the mapping .It S mapping is marked stack .It e mapping is allowed system call entry points .It I mapping is immutable (rwx protection may not be changed) .It p shared/private flag .It c mapping needs to be copied on write .Pq Sq + or has already been copied .Pq Sq - .El .Pp It is followed by the RWX column, which indicates the maximum permissions for the map entry. The column labeled I/W/A indicates the inheritance, wired, and advice values for the map entry, as previously described. .Sh EXIT STATUS .Ex -std procmap .Sh SEE ALSO .Xr ls 1 , .\" .Xr stat 1 , .Xr madvise 2 , .Xr mmap 2 , .Xr kvm 3 , .Xr ddb 4 , .Xr namei 9 , .Xr vnode 9 .Sh HISTORY The .Nm utility first appeared in .Ox 3.5 . It was derived from the .Nx utility known as .Dq pmap . .Sh AUTHORS The .Nm utility and documentation was written by .An Andrew Brown Aq Mt atatat@netbsd.org . .Sh BUGS Very little will work unless .Nm is reading from the correct kernel in order to retrieve the proper symbol information. .Pp Since processes can change state while .Nm is running, some of the information printed may be inaccurate. This is especially important to consider when examining the kernel's map, since merely executing .Nm will cause some of the information to change. .Pp The pathnames to files backing certain vnodes (such as the text and data sections of programs and shared libraries) are extracted from the kernel's namei cache which is considerably volatile. If a path is not found there in its entirety, as much information as was available will be printed. In most cases, simply running .Xr ls 1 .\" or .\" .Xr stat 1 with the expected path to the file will cause the information to be reentered into the cache. .Pp The Solaris version .Pq Dq pmap has some interesting command line flags that would be nice to emulate here. In particular, the .Fl r option that lists a process's reserved addresses, and the .Fl x option that prints resident/shared/private mapping details for each entry. .Pp Some of the output modes can be or are wider than the standard 80 columns of a terminal. Some sort of formatting might be nice.