.\" Copyright (c) 1990, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     from: @(#)syslog.conf.5	8.1 (Berkeley) 6/9/93
.\"     $OpenBSD: syslog.conf.5,v 1.19 2004/07/03 05:32:18 djm Exp $
.\"	$NetBSD: syslog.conf.5,v 1.4 1996/01/02 17:41:46 perry Exp $
.\"
.Dd June 9, 1993
.Dt SYSLOG.CONF 5
.Os
.Sh NAME
.Nm syslog.conf
.Nd
.Xr syslogd 8
configuration file
.Sh DESCRIPTION
The
.Nm syslog.conf
file is the configuration file for the
.Xr syslogd 8
program.
It consists of blocks of lines separated by
.Em program
specifications, with each line containing two fields: the
.Em selector
field which specifies the types of messages and priorities to which the
line applies, and an
.Em action
field which specifies the action to be taken if a message
.Xr syslogd
receives matches the selection criteria.
The
.Em selector
field is separated from the
.Em action
field by one or more tab characters.
.Pp
The
.Em selectors
function
is encoded as a
.Em facility ,
a period
.Pq Ql \&. ,
and a
.Em level ,
with no intervening whitespace.
Both the
.Em facility
and the
.Em level
are case insensitive.
.Pp
The
.Em facility
describes the part of the system generating the message, and is one of
the following keywords: auth, authpriv, cron, daemon, kern, lpr, mail,
mark, news, syslog, user, uucp and local0 through local7.
These keywords (with the exception of mark) correspond to the
similar
.Dq Dv LOG_
values specified to the
.Xr openlog 3
and
.Xr syslog 3
library routines.
.Pp
The
.Em level
describes the severity of the message, and is a keyword from the
following ordered list (highest to lowest): emerg, alert, crit, err,
warning, notice, info and debug.
These keywords correspond to the
similar
.Pq Dv LOG_
values specified to the
.Xr syslog
library routine.
.Pp
Each block of lines is separated from the previous block by a tag.
The tag is a line beginning with
.Em !prog
and each block will be associated with calls to syslog from that specific
program.
When a message matches multiple blocks, the action of each matching
block is taken.
If no tag is specified at the beginning of the file,
every line is checked for a match and acted upon
.Pq at least until a tag is found .
.Pp
.Em !!prog
causes the subsequent block to abort evaluation when a message matches,
ensuring that only a single set of actions is taken.
.Em !*\&
can be used to ensure that any ensuing blocks are further evaluated
(i.e. cancelling the effect of a
.Em !prog
or
.Em !!prog ) .
.Pp
See
.Xr syslog 3
for further descriptions of both the
.Em facility
and
.Em level
keywords and their significance.
It's preferred that selections be made on
.Em facility
rather than
.Em program ,
since the latter can easily vary in a networked environment.
In some cases, though, an appropriate
.Em facility
simply doesn't exist.
.Pp
If a received message matches the specified
.Em facility
and is of the specified
.Em level
.Pq Em or a higher level ,
and the first word in the message after the date matches the
.Em program ,
the action specified in the
.Em action
field will be taken.
.Pp
Multiple
.Em selectors
may be specified for a single
.Em action
by separating them with semicolon
.Pq Ql \&;
characters.
It is important to note, however, that each
.Em selector
can modify the ones preceding it.
.Pp
Multiple
.Em facilities
may be specified for a single
.Em level
by separating them with comma
.Pq Ql \&,
characters.
.Pp
An asterisk
.Pq Ql *
can be used to specify all
.Em facilities ,
all
.Em levels
or all
.Em programs .
.Pp
The special
.Em facility
.Dq mark
receives a message at priority
.Dq info
every 20 minutes (see
.Xr syslogd 8 ) .
This is not enabled by a
.Em facility
field containing an asterisk.
.Pp
The special
.Em level
.Dq none
disables a particular
.Em facility .
.Pp
The
.Em action
field of each line specifies the action to be taken when the
.Em selector
field selects a message.
There are five forms:
.Bl -bullet
.It
A pathname (beginning with a leading slash).
Selected messages are appended to the file.
.It
A hostname (preceded by an at
.Pq Ql @
sign).
Selected messages are forwarded to the
.Xr syslogd
program on the named host.
A port number may be optionally specified using the
.Ar host:port
syntax.
.It
A comma separated list of users.
Selected messages are written to those users
if they are logged in.
.It
An asterisk.
Selected messages are written to all logged-in users.
.It
A colon, followed by a memory buffer size
.Pq in kilobytes ,
followed by another colon, followed by a buffer name.
Selected messages are written to an in-memory buffer that may be read using
.Xr syslogc 8 .
Memory buffered logging is useful to provide access to log data on devices
that lack local storage (e.g. diskless workstations or routers).
The largest allowed buffer size is 256kb.
.El
.Pp
Blank lines and lines whose first non-blank character is a hash
.Pq Ql #
character are ignored.
.Sh FILES
.Bl -tag -width /etc/syslog.conf -compact
.It Pa /etc/syslog.conf
The
.Xr syslogd 8
configuration file.
.El
.Sh EXAMPLES
A configuration file might appear as follows:
.Bd -literal
# Log info (and higher) messages from spamd only to
# a dedicated file, discarding debug messages.
# Matching messages abort evaluation of further rules.
!!spamd
daemon.info						/var/log/spamd
daemon.debug						/dev/null
!*

# Log all kernel messages, authentication messages of
# level notice or higher and anything of level err or
# higher to the console.
# Don't log private authentication messages!
*.err;kern.*;auth.notice;authpriv.none			/dev/console

# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none				/var/log/messages

# The authpriv file has restricted access.
authpriv.*						/var/log/secure

# Log all the mail messages in one place.
mail.*							/var/log/maillog

# Everybody gets emergency messages, plus log them on another
# machine.
*.emerg							*
*.emerg							@arpa.berkeley.edu

# Root and Eric get alert and higher messages.
*.alert							root,eric

# Save mail and news errors of level err and higher in a
# special file.
mail,news.err						/var/log/spoolerr

# Save ftpd transactions along with mail and news
!ftpd
*.*							/var/log/spoolerr

# Keep a copy of all logging in a 32k memory buffer named "debug"
*.debug							:32:debug

# Store notices and authpriv messages in a 64k buffer named "important"
*.notice,authpriv.*					:64:important
.Ed
.Sh SEE ALSO
.Xr syslog 3 ,
.Xr syslogc 8 ,
.Xr syslogd 8
.Sh HISTORY
The
.Nm
file appeared in
.Bx 4.3 ,
along with
.Xr syslogd 8 .
.Sh BUGS
The effects of multiple selectors are sometimes not intuitive.
For example
.Dq mail.crit;*.err
will select
.Dq mail
facility messages at the level of
.Dq err
or higher, not at the level of
.Dq crit
or higher.