/* * Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that: (1) source code distributions * retain the above copyright notice and this paragraph in its entirety, (2) * distributions including binary code include the above copyright notice and * this paragraph in its entirety in the documentation or other materials * provided with the distribution, and (3) all advertising materials mentioning * features or use of this software display the following acknowledgement: * ``This product includes software developed by the University of California, * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of * the University nor the names of its contributors may be used to endorse * or promote products derived from this software without specific prior * written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ #ifndef lint static const char rcsid[] = "@(#) $Header: /cvs/OpenBSD/src/usr.sbin/tcpdump/print-fddi.c,v 1.7 1998/06/02 05:25:54 deraadt Exp $ (LBL)"; #endif #ifdef HAVE_FDDI #include #include #include #include #include #ifdef __STDC__ struct mbuf; struct rtentry; #endif #include #include #include #include #include #include #include #include #include #include #include #include "interface.h" #include "addrtoname.h" #include "ethertype.h" #include "fddi.h" /* * Some FDDI interfaces use bit-swapped addresses. */ #if defined(ultrix) || defined(__alpha) || defined(__bsdi) || \ defined(__NetBSD__) || defined(__OpenBSD__) int fddi_bitswap = 0; #else int fddi_bitswap = 1; #endif /* * FDDI support for tcpdump, by Jeffrey Mogul [DECWRL], June 1992 * * Based in part on code by Van Jacobson, which bears this note: * * NOTE: This is a very preliminary hack for FDDI support. * There are all sorts of wired in constants & nothing (yet) * to print SMT packets as anything other than hex dumps. * Most of the necessary changes are waiting on my redoing * the "header" that a kernel fddi driver supplies to bpf: I * want it to look like one byte of 'direction' (0 or 1 * depending on whether the packet was inbound or outbound), * two bytes of system/driver dependent data (anything an * implementor thinks would be useful to filter on and/or * save per-packet, then the real 21-byte FDDI header. * Steve McCanne & I have also talked about adding the * 'direction' byte to all bpf headers (e.g., in the two * bytes of padding on an ethernet header). It's not clear * we could do this in a backwards compatible way & we hate * the idea of an incompatible bpf change. Discussions are * proceeding. * * Also, to really support FDDI (and better support 802.2 * over ethernet) we really need to re-think the rather simple * minded assumptions about fixed length & fixed format link * level headers made in gencode.c. One day... * * - vj */ #define FDDI_HDRLEN (sizeof(struct fddi_header)) static u_char fddi_bit_swap[] = { 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff, }; /* * Print FDDI frame-control bits */ static inline void print_fddi_fc(u_char fc) { switch (fc) { case FDDIFC_VOID: /* Void frame */ printf("void "); break; case FDDIFC_NRT: /* Nonrestricted token */ printf("nrt "); break; case FDDIFC_RT: /* Restricted token */ printf("rt "); break; case FDDIFC_SMT_INFO: /* SMT Info */ printf("info "); break; case FDDIFC_SMT_NSA: /* SMT Next station adrs */ printf("nsa "); break; case FDDIFC_MAC_BEACON: /* MAC Beacon frame */ printf("beacon "); break; case FDDIFC_MAC_CLAIM: /* MAC Claim frame */ printf("claim "); break; default: switch (fc & FDDIFC_CLFF) { case FDDIFC_MAC: printf("mac%1x ", fc & FDDIFC_ZZZZ); break; case FDDIFC_SMT: printf("smt%1x ", fc & FDDIFC_ZZZZ); break; case FDDIFC_LLC_ASYNC: printf("async%1x ", fc & FDDIFC_ZZZZ); break; case FDDIFC_LLC_SYNC: printf("sync%1x ", fc & FDDIFC_ZZZZ); break; case FDDIFC_IMP_ASYNC: printf("imp_async%1x ", fc & FDDIFC_ZZZZ); break; case FDDIFC_IMP_SYNC: printf("imp_sync%1x ", fc & FDDIFC_ZZZZ); break; default: printf("%02x ", fc); break; } } } /* Extract src, dst addresses */ static inline void extract_fddi_addrs(const struct fddi_header *fddip, char *fsrc, char *fdst) { register int i; if (fddi_bitswap) { /* * bit-swap the fddi addresses (isn't the IEEE standards * process wonderful!) then convert them to names. */ for (i = 0; i < 6; ++i) fdst[i] = fddi_bit_swap[fddip->fddi_dhost[i]]; for (i = 0; i < 6; ++i) fsrc[i] = fddi_bit_swap[fddip->fddi_shost[i]]; } else { memcpy(fdst, (char *)fddip->fddi_dhost, 6); memcpy(fsrc, (char *)fddip->fddi_shost, 6); } } /* * Print the FDDI MAC header */ static inline void fddi_print(register const struct fddi_header *fddip, register u_int length, register const u_char *fsrc, register const u_char *fdst) { char *srcname, *dstname; srcname = etheraddr_string(fsrc); dstname = etheraddr_string(fdst); if (vflag) (void) printf("%02x %s %s %d: ", fddip->fddi_fc, srcname, dstname, length); else if (qflag) printf("%s %s %d: ", srcname, dstname, length); else { (void) print_fddi_fc(fddip->fddi_fc); (void) printf("%s %s %d: ", srcname, dstname, length); } } static inline void fddi_smt_print(const u_char *p, u_int length) { printf(""); } /* * This is the top level routine of the printer. 'sp' is the points * to the FDDI header of the packet, 'tvp' is the timestamp, * 'length' is the length of the packet off the wire, and 'caplen' * is the number of bytes actually captured. */ void fddi_if_print(u_char *pcap, const struct pcap_pkthdr *h, register const u_char *p) { u_int caplen = h->caplen; u_int length = h->len; const struct fddi_header *fddip = (struct fddi_header *)p; extern u_short extracted_ethertype; struct ether_header ehdr; ts_print(&h->ts); if (caplen < FDDI_HDRLEN) { printf("[|fddi]"); goto out; } /* * Get the FDDI addresses into a canonical form */ extract_fddi_addrs(fddip, (char *)ESRC(&ehdr), (char *)EDST(&ehdr)); /* * Some printers want to get back at the link level addresses, * and/or check that they're not walking off the end of the packet. * Rather than pass them all the way down, we set these globals. */ snapend = p + caplen; /* * Actually, the only printer that uses packetp is print-bootp.c, * and it assumes that packetp points to an Ethernet header. The * right thing to do is to fix print-bootp.c to know which link * type is in use when it excavates. XXX */ packetp = (u_char *)&ehdr; if (eflag) fddi_print(fddip, length, ESRC(&ehdr), EDST(&ehdr)); /* Skip over FDDI MAC header */ length -= FDDI_HDRLEN; p += FDDI_HDRLEN; caplen -= FDDI_HDRLEN; /* Frame Control field determines interpretation of packet */ extracted_ethertype = 0; if ((fddip->fddi_fc & FDDIFC_CLFF) == FDDIFC_LLC_ASYNC) { /* Try to print the LLC-layer header & higher layers */ if (llc_print(p, length, caplen, ESRC(&ehdr), EDST(&ehdr)) == 0) { /* * Some kinds of LLC packet we cannot * handle intelligently */ if (!eflag) fddi_print(fddip, length, ESRC(&ehdr), EDST(&ehdr)); if (extracted_ethertype) { printf("(LLC %s) ", etherproto_string(htons(extracted_ethertype))); } if (!xflag && !qflag) default_print(p, caplen); } } else if ((fddip->fddi_fc & FDDIFC_CLFF) == FDDIFC_SMT) fddi_smt_print(p, caplen); else { /* Some kinds of FDDI packet we cannot handle intelligently */ if (!eflag) fddi_print(fddip, length, ESRC(&ehdr), EDST(&ehdr)); if (!xflag && !qflag) default_print(p, caplen); } if (xflag) default_print(p, caplen); out: putchar('\n'); } #else #include #include #include #include "interface.h" void fddi_if_print(u_char *pcap, const struct pcap_pkthdr *h, register const u_char *p) { error("not configured for fddi"); /* NOTREACHED */ } #endif