/* $OpenBSD: virtio.h,v 1.28 2018/09/09 04:09:32 ccardenas Exp $ */ /* * Copyright (c) 2015 Mike Larkin * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #define VIRTQUEUE_ALIGN(n) (((n)+(VIRTIO_PAGE_SIZE-1))& \ ~(VIRTIO_PAGE_SIZE-1)) /* Queue sizes must be power of two */ #define VIORND_QUEUE_SIZE 64 #define VIORND_QUEUE_MASK (VIORND_QUEUE_SIZE - 1) #define VIOBLK_QUEUE_SIZE 128 #define VIOBLK_QUEUE_MASK (VIOBLK_QUEUE_SIZE - 1) #define VIOSCSI_QUEUE_SIZE 128 #define VIOSCSI_QUEUE_MASK (VIOSCSI_QUEUE_SIZE - 1) #define VIONET_QUEUE_SIZE 256 #define VIONET_QUEUE_MASK (VIONET_QUEUE_SIZE - 1) /* VMM Control Interface shutdown timeout (in seconds) */ #define VMMCI_TIMEOUT 3 #define VMMCI_SHUTDOWN_TIMEOUT 30 /* All the devices we support have either 1, 2 or 3 queues */ /* viornd - 1 queue * vioblk - 1 queue * vionet - 2 queues * vioscsi - 3 queues */ #define VIRTIO_MAX_QUEUES 3 /* * This struct stores notifications from a virtio driver. There is * one such struct per virtio device. */ struct virtio_io_cfg { uint32_t device_feature; uint32_t guest_feature; uint32_t queue_address; uint16_t queue_size; uint16_t queue_select; uint16_t queue_notify; uint8_t device_status; uint8_t isr_status; }; struct virtio_backing { void *p; ssize_t (*pread)(void *p, char *buf, size_t len, off_t off); ssize_t (*pwrite)(void *p, char *buf, size_t len, off_t off); void (*close)(void *p); }; /* * A virtio device can have several virtqs. For example, vionet has one virtq * each for transmitting and receiving packets. This struct describes the state * of one virtq, such as their address in memory, size, offsets of rings, etc. * There is one virtio_vq_info per virtq. */ struct virtio_vq_info { /* Guest physical address of virtq */ uint32_t qa; /* Queue size: number of queue entries in virtq */ uint32_t qs; /* * The offset of the 'available' ring within the virtq located at * guest physical address qa above */ uint32_t vq_availoffset; /* * The offset of the 'used' ring within the virtq located at guest * physical address qa above */ uint32_t vq_usedoffset; /* * The index into a slot of the 'available' ring that a virtio device * can consume next */ uint16_t last_avail; /* * The most recent index into the 'available' ring that a virtio * driver notified to the host. */ uint16_t notified_avail; }; /* * Each virtio driver has a notifyq method where one or more messages * are ready to be processed on a given virtq. As such, various * pieces of information are needed to provide ring accounting while * processing a given message such as virtq indexes, vring pointers, and * vring descriptors. */ struct virtio_vq_acct { /* index of previous avail vring message */ uint16_t idx; /* index of current message containing the request */ uint16_t req_idx; /* index of current message containing the response */ uint16_t resp_idx; /* vring descriptor pointer */ struct vring_desc *desc; /* vring descriptor pointer for request header and data */ struct vring_desc *req_desc; /* vring descriptor pointer for response header and data */ struct vring_desc *resp_desc; /* pointer to the available vring */ struct vring_avail *avail; /* pointer to the used vring */ struct vring_used *used; }; struct viornd_dev { struct virtio_io_cfg cfg; struct virtio_vq_info vq[VIRTIO_MAX_QUEUES]; uint8_t pci_id; int irq; uint32_t vm_id; }; struct vioblk_dev { struct virtio_io_cfg cfg; struct virtio_vq_info vq[VIRTIO_MAX_QUEUES]; struct virtio_backing file; uint64_t sz; uint32_t max_xfer; uint8_t pci_id; int irq; uint32_t vm_id; }; /* vioscsi will use at least 3 queues - 5.6.2 Virtqueues * Current implementation will use 3 * 0 - control * 1 - event * 2 - requests */ struct vioscsi_dev { struct virtio_io_cfg cfg; struct virtio_vq_info vq[VIRTIO_MAX_QUEUES]; struct virtio_backing file; /* is the device locked */ int locked; /* size of iso file in bytes */ uint64_t sz; /* last block address read */ uint64_t lba; /* number of blocks represented in iso */ uint64_t n_blocks; uint32_t max_xfer; uint8_t pci_id; uint32_t vm_id; int irq; }; struct vionet_dev { pthread_mutex_t mutex; struct event event; struct virtio_io_cfg cfg; struct virtio_vq_info vq[VIRTIO_MAX_QUEUES]; int fd, rx_added; int rx_pending; uint32_t vm_id; uint32_t vm_vmid; int irq; uint8_t mac[6]; int idx; int lockedmac; int local; uint8_t pci_id; }; struct virtio_net_hdr { uint8_t flags; uint8_t gso_type; uint16_t hdr_len; uint16_t gso_size; uint16_t csum_start; uint16_t csum_offset; /* * num_buffers is only used if VIRTIO_NET_F_MRG_RXBUF is negotiated. * vmd(8) doesn't negotiate that, but the field is listed here * for completeness sake. */ /* uint16_t num_buffers; */ }; enum vmmci_cmd { VMMCI_NONE = 0, VMMCI_SHUTDOWN, VMMCI_REBOOT, VMMCI_SYNCRTC, }; struct vmmci_dev { struct virtio_io_cfg cfg; struct event timeout; struct timeval time; enum vmmci_cmd cmd; uint32_t vm_id; int irq; uint8_t pci_id; }; struct ioinfo { struct virtio_backing *file; uint8_t *buf; ssize_t len; off_t offset; int error; }; /* virtio.c */ void virtio_init(struct vmd_vm *, int, int *, int *); int virtio_dump(int); int virtio_restore(int, struct vmd_vm *, int, int *, int *); uint32_t vring_size(uint32_t); int virtio_rnd_io(int, uint16_t, uint32_t *, uint8_t *, void *, uint8_t); int viornd_dump(int); int viornd_restore(int, struct vm_create_params *); void viornd_update_qs(void); void viornd_update_qa(void); int viornd_notifyq(void); int virtio_init_raw(struct virtio_backing *dev, off_t *sz, int fd); int virtio_init_qcow2(struct virtio_backing *dev, off_t *sz, int fd); int virtio_blk_io(int, uint16_t, uint32_t *, uint8_t *, void *, uint8_t); int vioblk_dump(int); int vioblk_restore(int, struct vmop_create_params *, int *); void vioblk_update_qs(struct vioblk_dev *); void vioblk_update_qa(struct vioblk_dev *); int vioblk_notifyq(struct vioblk_dev *); int virtio_net_io(int, uint16_t, uint32_t *, uint8_t *, void *, uint8_t); int vionet_dump(int); int vionet_restore(int, struct vmd_vm *, int *); void vionet_update_qs(struct vionet_dev *); void vionet_update_qa(struct vionet_dev *); int vionet_notifyq(struct vionet_dev *); void vionet_notify_rx(struct vionet_dev *); int vionet_notify_tx(struct vionet_dev *); void vionet_process_rx(uint32_t); int vionet_enq_rx(struct vionet_dev *, char *, ssize_t, int *); int vmmci_io(int, uint16_t, uint32_t *, uint8_t *, void *, uint8_t); int vmmci_dump(int); int vmmci_restore(int, uint32_t); int vmmci_ctl(unsigned int); void vmmci_ack(unsigned int); void vmmci_timeout(int, short, void *); const char *vioblk_cmd_name(uint32_t); int vioscsi_dump(int); int vioscsi_restore(int, struct vm_create_params *, int); /* dhcp.c */ ssize_t dhcp_request(struct vionet_dev *, char *, size_t, char **); /* vioscsi.c */ int vioscsi_io(int, uint16_t, uint32_t *, uint8_t *, void *, uint8_t); void vioscsi_update_qs(struct vioscsi_dev *); void vioscsi_update_qa(struct vioscsi_dev *); int vioscsi_notifyq(struct vioscsi_dev *);