path: root/distrib/miniroot/install.sub

#	$OpenBSD: install.sub,v 1.260 2002/09/28 23:35:12 krw Exp $
#	$NetBSD: install.sub,v 1.5.2.8 1996/09/02 23:25:02 pk Exp $
#
# Copyright (c) 1997-2002 Todd Miller, Theo de Raadt, Ken Westerback
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#	This product includes software developed by Todd Miller and
#	Theo de Raadt
# 4. The name of the author may not be used to endorse or promote products
#    derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Copyright (c) 1996 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Jason R. Thorpe.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#        This product includes software developed by the NetBSD
#        Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

# OpenBSD install/upgrade script common subroutines and initialization code

# Include machine-dependent functions and definitions.
#
# The following functions must be provided:
#	md_congrats()		  - display friendly message
#	md_installboot()	  - install boot-blocks on disk
#	md_prep_disklabel()	  - label the root disk
#	md_set_term()		  - set up terminal
#
# The following variables can be provided if required:
#	MDTERM      - 'vt220' assumed if not provided
#	MDFSTYPE    - nothing assumed if not provided
#	MDFSOPTS    - nothing assumed if not provided
#	MDDISKDEVS  - '/^[sw]d[0-9][0-9]* /s/ .*//p' assumed if not provided
#	MDCDDEVS    - '/^cd[0-9][0-9]* /s/ .*//p'    assumed if not provided
#	MDXAPERTURE - if not empty, set machdep.allowaperture=value in sysctl.conf
. install.md

set_term() {
	[ "$TERM" ] && return
	ask "Specify terminal type:" ${MDTERM:-vt220}
	TERM=$resp
	export TERM

	md_set_term
}

welcome() {
	local _query

	cat << __EOT

Welcome to the OpenBSD/${ARCH} ${VERSION_MAJOR}.${VERSION_MINOR} ${MODE} program.

This program will help you ${MODE} OpenBSD in a simple and rational way. At
any prompt except password prompts you can run a shell command by typing
'!foo', or escape to a shell by typing '!'. Default answers are shown in []'s
and are selected by pressing RETURN. At any time you can exit this program by
pressing Control-C and then RETURN, but quitting during an ${MODE} can leave
your system in an inconsistent state.

__EOT

	# Configure the terminal.
	set_term

	cat << __EOT

IS YOUR DATA BACKED UP? As with anything that modifies disk contents, this 
program can cause SIGNIFICANT data loss.
__EOT

	case $MODE in
	upgrade)
		cat << __EOT

NOTE: once your system has been upgraded, you must manually merge any changes
to files in the 'etc' set into the files already on your system.
__EOT
		_query="Proceed with upgrade?"
		;;

	install)
		cat << __EOT

It is often helpful to have the installation notes handy. For complex disk
configurations, relevant disk hardware manuals and a calculator are useful.
__EOT

		if [ -f /etc/fstab ]; then
			cat << __EOT

You seem to be trying to restart an interrupted installation! You can skip
the disk preparation steps and continue, or you can reboot and start over.
__EOT
			_query="Skip disk initialization?"
		else
			_query="Proceed with install?"
		fi
		;;
	esac

	ask "\n$_query" n
	case $resp in
	y*|Y*)	echo "Cool!  Let's get to it..."
		;;
	*)	cat << __EOT

Enter 'halt' at the prompt to gracefully exit OpenBSD. You can then
power cycle the machine and boot your original OS.
__EOT
		exit
		;;
	esac
}

get_dkdevs() {
	bsort `sed -ne "${MDDISKDEVS:-/^[sw]d[0-9][0-9]* /s/ .*//p}" /var/run/dmesg.boot`
}

get_cddevs() {
	bsort `sed -ne "${MDCDDEVS:-/^cd[0-9][0-9]* /s/ .*//p}" /var/run/dmesg.boot`
}

get_ifdevs() {
	/sbin/ifconfig -a | egrep -v '^([[:space:]]|(lo|enc|gre|ppp|sl|tun|bridge|pflog|vlan|gif)[[:digit:]])' | cutword -t: 1
}

# Ask for a password, saving the input in $resp.
#    Display $1 as the prompt.
#    *Don't* allow the '!' options that ask does.
#    *Don't* echo input.
askpass() {
	set -o noglob
	stty -echo
	read resp?"$1 "
	stty echo
	set +o noglob
	echo
}

# Ask for user input.
#
#    $1    = the question to ask the user
#    $2    = the default answer
#
# Save the user input (or the default) in $resp.
#
# Allow the user to escape to shells ('!') or execute commands
# ('!foo') before entering the input.
ask() {
	local _question=$1 _default=$2

	set -o noglob
	while : ; do
		echo -n "$_question "
		[[ -z $_default ]] || echo -n "[$_default] "
		read resp
		case $resp in
		!)	echo "Type 'exit' to return to install."
			sh
			;;
		!*)	eval ${resp#?}
			;;
		*)	: ${resp:=$_default}
			break
			;;
		esac
	done
	set +o noglob
}

# Ask for user input until a non-empty reply is entered.
#
#    $1    = the question to ask the user
#    $2    = the default answer
#
# Save the user input (or the default) in $resp.
ask_until () {
	resp=
	while [ -z "$resp" ] ; do
		ask "$1" "$2"
	done
}

# Ask for the user to select a device from a list generated by scanning
# /var/run/dmesg.boot, and make the device if it doesn't exist.
#
# $1 = device name (disk, cd, etc.)
# $2 = question to ask
# $3 = list of devices from /var/run/dmesg.boot scan
# $4 = default device
#
# $resp holds device selected at exit, or 'done'
ask_which () {
	local _name=$1 _query=$2 _devs=$3 _defdev=$4

	# If not default device is supplied, assume 'done'.
	: ${_defdev:=done}

	# A trailing space may be present if _devs list
	# was manipulated by rmel().
	_devs=${_devs% }

	resp=
	if [[ -z $_devs ]]; then
		echo "Done - no available ${_name}s found."
		resp=done
	fi

	while [ -z "$resp" ]; do
		# Put both lines in ask prompt, rather than use a
		# separate 'echo', to ensure entire question is
		# re-ask'ed after a '!' '!foo' shell escape.
		ask "Available ${_name}s are: ${_devs}.\nWhich one $_query (or done)" "$_defdev"

		if isin $resp $_devs ; then
			makedev $resp || resp=
		elif [ "$resp" != "done" ]; then
			echo "'$resp' is not a valid choice."
			resp=
		fi
	done
}

# test the first argument against the remaining ones, return success on a match
isin() {
	local	_a=$1 _b

	shift
	for _b; do
		[ "$_a" = "$_b" ] && return 0
	done
	return 1
}

# add first argument to list formed by the remaining arguments
# adds to the tail if the element does not already exist
addel() {
	local	_a=$1 _b _seen=false

	shift
	for _b; do
		echo -n "$_b "
		[ "$_a" = "$_b" ] && _seen=true
	done

	$_seen || echo -n "$_a"
}

# remove all occurrences of first argument from list formed by
# the remaining arguments
rmel() {
	local	_a=$1 _b

	shift
	for _b; do
		[ "$_a" != "$_b" ] && echo -n "$_b "
	done
}

# read lines on stdin, return Nth element of each line, like cut(1)
cutword () {
	local _a _n _oifs=$IFS

	# optional field separator
	case $1 in
	-t?*) IFS=${1#-t}; shift;;
	esac

	_n=$1
	while read _a; do
		set -- $_a
		[ "$1" ] || break
		eval echo \$$_n
	done
	IFS=$_oifs
}

# read a line of data, return last element. Equiv. of awk '{print $NF}'.
cutlast () {
	local _a

	read _a; set -- $_a
	[ $# -gt 0 ] || return
	eval echo \$\{$#\}
}

bsort() {
	local _l _a=$1 _b

	case $# in
	0) return;;
	1) echo $1; return;;
	esac

	shift
	for _b; do
		if [[ "$_a" != "$_b" ]] ; then
			if [[ "$_a" > "$_b" ]] ; then
				_l="$_a $_l"; _a=$_b
			else
				_l="$_b $_l"
			fi
		fi
	done

	echo -n $_a

	# Prevent a trailing blank on the output, and thus a bad value
	# for cutlast or cutword, by outputting blanks only when $_l
	# has values to sort.

	if [[ -n "$_l" ]] ; then
		echo -n " "
		bsort $_l
	fi
}

# log in via ftp to host $1 as user $2 with password $3
# and return a list of all files in the directory $4 on stdout
ftp_list_files() {
	ftp ${_ftp_active} -V -n "$1" << __EOT
user "$2" "$3"
cd "$4"
ls
quit
__EOT
}

# $1 is the mountpoint the local directory will be relative to.
# $2 is the default directory
get_setsdir() {
	local _mp=$1 _dir=$2 _mounted
	
	SETSDIR=

	_mounted=`mount | sed -ne "/\(.*\)\/\(${_mp#/}\)\/*\(.*\) type.*/s//\/\3/p"`

	if [ -z "$_mounted" ]; then
	    echo "No filesystems mounted at or below ${_mp}."
	    return
	fi

	while : ; do
		ask "Enter the pathname where the sets are stored (or '?')" "$_dir"
		case $resp in
		"?")	cat << __EOT
Sets could be stored on:

${_mounted}

__EOT
			continue
			;;
		"")	;;
		*)	if [ -d "${_mp}/${resp}" ]; then
				SETSDIR=${_mp}/${resp}
				return
			fi
			echo "The directory '${resp}' does not exist."
			;;
		esac

		ask "Re-enter pathname?" y
		case $resp in
		y*|Y*)	;;
		*)	break
			;;
		esac
	done
}

makedev() {
	local _d=$1

	if [ ! -c /dev/r${_d}c ]; then
		if [ -r /dev/MAKEDEV ]; then
			(cd /dev; sh MAKEDEV $_d)
		else
			echo "Device nodes for $_d are missing, and MAKEDEV"
			echo "does not exist to create them with.  Sorry."
			false
		fi
	fi
}

get_rootdisk() {
	local _defdsk

	_defdsk=`echo $DKDEVS | cutlast`
	[ "$_defdsk" = "$DKDEVS" ] || _defdsk=

if [ "$MODE" = "install" -a ! -f /etc/fstab ]; then
	cat << __EOT

You will now initialize the disk(s) that OpenBSD will use. To enable all
available security features you should configure the disk(s) to allow the
creation of separate filesystems for /, /tmp, /var, /usr, and /home.

__EOT
fi

	ROOTDISK=
	ROOTDEV=

	ask_which "disk" "is the root disk?" "$DKDEVS" "$_defdsk"
	[ "$resp" = "done" ] && exit

	ROOTDISK=$resp
	ROOTDEV=${ROOTDISK}a
}

# Create an entry in the hosts file. If an entry with the
# same symbolic name already exists, delete it.
# $1 - IP address
# $2 - symbolic name
addhostent() {
	sed "/ $2\$/d" /tmp/hosts > /tmp/hosts.new
	mv /tmp/hosts.new /tmp/hosts

	echo "$1 $2" >> /tmp/hosts
}

# Create a hostname.* file for the interface.
# $1 - interface name
# $2 - interface symbolic name
# $3 - interface IP address
# $4 - interface netmask
# $5 - (optional) interface media directives
addifconfig() {
	if [ "$3" = "dhcp" ]; then
		echo "dhcp NONE NONE NONE $5" > /tmp/hostname.$1
		addhostent 127.0.0.1 $2
	else
		echo "inet $3 $4 NONE $5" > /tmp/hostname.$1
		addhostent $3 $2
	fi
}

# Show selection list and get user response to give question
# in global _resp.
#
# $1 = full list to display
# $2 = list of already selected elements
# $3 = question to ask user
do_selection_list() {
	local _next _elem

	for _elem in $1; do
		if isin $_elem $2; then
			echo -n "	[X] "
		else
			echo -n "	[ ] "
			: ${_next:=$_elem}
		fi
		echo $_elem
	done
	: ${_next:=done}

	ask "\n$3 (or 'done')" "$_next"
}

configure_all_interfaces() {
	local _ifsdone _ifs

	while : ; do
		cat << __EOT

Available network interfaces ([X] == already configured) are:

__EOT
		do_selection_list "$IFDEVS" "$_ifsdone" "Configure which interface?"

		case $resp in
		"done")	break	
			;;
		*)	_ifs=$resp
			if isin $_ifs $IFDEVS ; then
				if configure_ifs $_ifs ; then
					_ifsdone="$_ifs $_ifsdone"
				fi
			else
				echo "Invalid response: '$resp' is not in list"
			fi
			;;
		esac
	done
}

configure_ifs() {
	local _up _if_name=$1 _if_ip _if_mask
	local _if_symname _if_extra _hostname
	local _dhcp_prompt _mediaopts

	set -- `ifconfig $_if_name | sed -n '
		1s/.*<UP,.*$/UP/p
		1s/.*<.*>*$/DOWN/p
		/media:/s/^.*$//
		/status:/s/^.*$//
		/inet/s/--> [0-9.][0-9.]*//
		/inet/s/netmask//
		/inet/s/broadcast//
		/inet/s/inet// p'`

	_up=$1
	_if_ip=$2
	_if_mask=$3

	[ $_up = "UP" ] && ifconfig $_if_name delete down

	[ -x /sbin/dhclient ] && _dhcp_prompt=" (or 'dhcp')"

	# Get IP address
	resp=
	while [ -z "$resp" ] ; do
		ask "IP address${_dhcp_prompt}?" "$_if_ip"
		if [ ! -x /sbin/dhclient -a "$resp" == "dhcp" ]; then
			echo "DHCP is not supported."
			resp=
		fi
	done
	_if_ip=$resp

	# Get symbolic name
	_hostname=`hostname`
	ask_until "Symbolic (host) name?" "$_hostname"
	_if_symname=$resp

	# Get netmask
	if [ "$_if_ip" != "dhcp" ]; then
		ask_until "Netmask?" "${_if_mask:=255.255.255.0}"
		_if_mask=$resp
	fi

        _mediaopts=`ifconfig -m $_if_name | sed -n '/media:/D;/media/p'`
	if [ "$_mediaopts" ]; then
		cat << __EOT
The default media for $_if_name is
$(ifconfig -m $_if_name | sed -n '/supported/D;/media:/p')
__EOT
		ask "Do you want to change the default media?" "n"
		case $resp in
		y*|Y*)	cat << __EOT
Supported media options for $_if_name are:
$_mediaopts
__EOT
			ask "Enter media options for $_if_name:"
			_if_extra=$resp
			;;
		*)	;;
		esac
	fi

	# Configure the interface. If it
	# succeeds, add it to the permanent
	# network configuration info.
	if [ "$_if_ip" = "dhcp" ]; then
		ifconfig ${_if_name} down ${_if_extra}
		cat > /etc/dhclient.conf << __EOT
initial-interval 1;
send host-name "$_hostname";
request subnet-mask, broadcast-address, routers,
	domain-name, domain-name-servers, host-name;
__EOT
		dhclient -1 ${_if_name}

		set -- `ifconfig $_if_name | sed -n '
			1s/.*<UP,.*$/UP/p
			1s/.*<.*>*$/DOWN/p
			/media:/s/^.*$//
			/status:/s/^.*$//
			/inet/s/--> [0-9.][0-9.]*//
			/inet/s/netmask//
			/inet/s/broadcast//
			/inet/s/inet// p'`

		if [ $1 = "UP" -a $2 = "0.0.0.0" ]; then
			echo "hostname-associated DHCP attempt for $_if_name failed..."
			ifconfig $_if_name delete down

			cat > /etc/dhclient.conf << __EOT
initial-interval 1;
request subnet-mask, broadcast-address, routers,
	domain-name, domain-name-servers, host-name;
__EOT
			dhclient -1 ${_if_name}
			set -- `ifconfig $_if_name | sed -n '
				1s/.*<UP,.*$/UP/p
				1s/.*<.*>*$/DOWN/p
				/media:/s/^.*$//
				/status:/s/^.*$//
				/inet/s/--> [0-9.][0-9.]*//
				/inet/s/netmask//
				/inet/s/broadcast//
				/inet/s/inet// p'`

			if [ $1 = "UP" -a $2 = "0.0.0.0" ]; then
				echo "free-roaming DHCP attempt for $_if_name failed."
				ifconfig $_if_name delete down
				return 1
			else
				echo "DHCP attempt for $_if_name successful."
				addifconfig ${_if_name} ${_if_symname} ${_if_ip}
				return 0
			fi
		else
			echo "DHCP configuration of $_if_name successful."
			addifconfig ${_if_name} ${_if_symname} ${_if_ip}
			return 0
		fi
	else
		ifconfig ${_if_name} down
		if ifconfig ${_if_name} inet \
			${_if_ip} \
			netmask ${_if_mask} ${_if_extra} up
			then
			addifconfig ${_if_name} ${_if_symname} ${_if_ip} ${_if_mask} "$_if_extra"
			return 0
		fi
	fi
	return 1
}

# Returns true if $1 contains only alphanumerics
isalphanumeric() {
	local _n
	_n=$1
	while [ ${#_n} != 0 ]; do
		case $_n in
		[A-Za-z0-9]*)	;;
		*)		return 1;;
		esac
		_n=${_n#?}
	done
	return 0
}

# Much of this is gratuitously stolen from /etc/netstart.
enable_network() {
	# Check for required network related files
	for _netfile in hosts myname; do
		if [ ! -f /mnt/etc/${_netfile} ]; then
			echo "ERROR: no /mnt/etc/${_netfile}!"
			return 1
		fi
	done

	# Copy any required or optional files found
	for _netfile in hosts myname dhclient.conf resolv.conf resolv.conf.tail protocols services; do
		if [ -f /mnt/etc/${_netfile} ]; then
			cp /mnt/etc/${_netfile} /etc/${_netfile}
		fi
	done

	hostname=`cat /etc/myname`
	hostname $hostname

	DIDNET=y

	# set the address for the loopback interface
	ifconfig lo0 inet localhost

	# use loopback, not the wire
	route -n add -host $hostname localhost > /dev/null
	route -n add -net 127 127.0.0.1 -reject > /dev/null

	# configure all of the non-loopback interfaces which we know about.
	# refer to hostname.if(5)
	for hn in /mnt/etc/hostname.*; do
		# Strip off /mnt/etc/hostname. prefix
		if=${hn#/mnt/etc/hostname.}

		# Interface names must be alphanumeric only. We check to avoid
		# configuring backup or temp files, and to catch the "*" case.
		if ! isalphanumeric "$if"; then
			continue
		fi
		ifconfig $if > /dev/null 2>&1
		if [ $? -ne 0 ]; then
			continue
		fi

		# Now parse the hostname.* file
		while :; do
			if [ "$cmd2" ]; then
				# we are carrying over from the 'read dt dtaddr' last time
				set -- $cmd2
				af=$1 name=$2 mask=$3 bcaddr=$4 ext1=$5 cmd2=
				# make sure and get any remaining args in ext2, like the read below
				i=1; while [ i -lt 6 -a -n "$1" ]; do shift; let i=i+1; done
				ext2="$@"
			else
				# read the next line or exit the while loop
				read af name mask bcaddr ext1 ext2 || break
			fi
			# $af can be "dhcp", "up", "rtsol", an address family, commands, or
			# a comment.
			case $af in
			"#"*|"!"*|"bridge"|""|"rtsol")
				# skip comments, user commands, bridges,
				# IPv6 rtsol and empty lines
				continue
				;;
			"dhcp")	[ "$name" = "NONE" ] && name=
				[ "$mask" = "NONE" ] && mask=
				[ "$bcaddr" = "NONE" ] && bcaddr=
				ifconfig $if $name $mask $bcaddr $ext1 $ext2 down
				cmd="dhclient $if"
				;;
			"up")
				# The only one of these guaranteed to be set is $if
				# the remaining ones exist so that media controls work
				cmd="ifconfig $if $name $mask $bcaddr $ext1 $ext2 up"
				;;
			*)	read dt dtaddr
				if [ "$name" = "alias" ]; then
					# perform a 'shift' of sorts
					alias=$name
					name=$mask
					mask=$bcaddr
					bcaddr=$ext1
					ext1=$ext2
					ext2=
				else
					alias=
				fi
				cmd="ifconfig $if $af $alias $name "
				case $dt in
				dest)	cmd="$cmd $dtaddr"
					;;
				[a-z!]*)
					cmd2="$dt $dtaddr"
					;;
				esac
				if [ ! -n "$name" ]; then
					echo "/mnt/etc/hostname.$if: invalid network configuration file"
					return
				fi
				case $af in
				inet)	[ "$mask" ] && cmd="$cmd netmask $mask"
					if [ "$bcaddr" -a "$bcaddr" != "NONE" ]; then
						cmd="$cmd broadcast $bcaddr"
					fi
					[ "$alias" ] && rtcmd="; route -n add -host $name 127.0.0.1"
					;;
				inet6)
					# Ignore IPv6 setup
					continue
					;;
				*)	cmd="$cmd $mask $bcaddr"
				esac
				cmd="$cmd $ext1 $ext2$rtcmd" rtcmd=
				;;
			esac
			eval "$cmd"
		done < /mnt/etc/hostname.$if
	done

	# /mnt/etc/mygate, if it exists, contains the name of my gateway host
	# that name must be in /etc/hosts.
	if [ -f /mnt/etc/mygate ]; then
		route delete default > /dev/null 2>&1
		route -n add -host default `cat /mnt/etc/mygate`
	fi

	# Get FQDN after any DHCP manipulation of resolv.conf is done
	get_fqdn /etc/resolv.conf

	# Display results...
	echo "Network interface configuration:"
	ifconfig -am

	# enable the resolver if resolv.conf is available
	if [ -f /etc/resolv.conf ]; then
		route show
		echo "\nResolver enabled."
	else
		route -n show
		echo "\nResolver not enabled."
	fi

	return 0
}

# Do globbing on the selection and parse +/-, sets the global
# GET_FILES appropriately.
glob_selection() {
	local _selection=$1 _src=$2
	local _action _nomatch _f

	# Change +/- into add/remove, but ignore bare '+' or '-'
	_action=addel
	case $_selection in
	""|+|-)	return
		;;
	+*)	_selection=${_selection#?}
		;;
	-*)	_selection=${_selection#?}
		_action=rmel
		;;
	esac

	[ "$_selection" = "all" ] && _selection=*

	set -o noglob
	for _f in $SETS; do
		eval "case $_f in
		$_selection)
			GET_FILES=\`$_action $_f \$GET_FILES\`
			_nomatch=false
			;;
		esac"
	done
	set +o noglob

	if $_nomatch; then
		cat << __EOT
The file

    '${_src}/${_selection}'

does not exist. Check to make sure you entered the name properly.
__EOT
	fi
}

# Set global SETS to either
#     1) a list of sets found in both $1 and $THESETS, where
#        $2 is the location that generated the list of files in $1.
# or
#     2) a list of .tgz or .tar.gz files found in $2
get_sets () {
	local _f _file_list=$1 _src=$2

	SETS=

	for _f in $THESETS ; do
		if [ "$_f" = "kernel" ]; then
			if isin bsd $_file_list; then
				SETS="$SETS bsd"
			fi
		elif isin ${_f}${VERSION}.tar.gz $_file_list; then
			SETS="$SETS ${_f}${VERSION}.tar.gz"
		elif isin ${_f}${VERSION}.tgz $_file_list; then
			SETS="$SETS ${_f}${VERSION}.tgz"
		fi
	done

	if [ -z "$SETS" ]; then
		cat << __EOT
No OpenBSD ${VERSION_MAJOR}.${VERSION_MINOR} ${MODE} sets were found in

    '${_src}'

__EOT
		ask "Search for other *.tar.gz and *.tgz files?" y
		case $resp in
		n*|N*)	return ;;
		esac
		# *.tar.gz and *.tgz are possible sets
		for _f in $_file_list ; do
			case $_f in
			*.tar.gz|*.tgz)	SETS="$SETS ${_f}"
			esac
		done
	fi

	if [ -z "$SETS" ]; then
		ask "There are no *.tar.gz or *.tgz files in ${_src}.\nSee a directory listing?" y
		case $resp in
		n*|N*)	return ;;
		esac
		echo "\n${_file_list}\n"
		return
	fi
}

# Set global GET_FILES to the list of sets requested by the user.
# $1 = list of files available in source directory or url.
# $2 = source directory or url
get_get_files () {
	local _files=$1 _src=$2

	GET_FILES=

	get_sets "$_files" "$_src"

	[ "$SETS" ] || return

	# Set the default list of files
	for _f in $SETS ; do
		# $SETS contains only .tgz and .tar.gz file names and 'bsd'.
		case $_f in
		base*|bsd|comp*|etc*|game*|man*|misc*)
			isin $_f $SETSDONE || GET_FILES=`addel $_f $GET_FILES`
			;;
		esac
	done

	# Allow the user to select/de-select additional sets
	while : ; do
		cat << __EOT

The following sets are available. Enter a filename, 'all' to select
all the sets, or 'done'. You may de-select a set by prepending a '-'
to its name.

__EOT
		do_selection_list "$SETS" "$GET_FILES" "File Name?"

		[ "$resp" = "done" ] && break

		glob_selection "$resp" "$_src"
	done
}

# Install the list of files in the global GET_FILES from the source
# named in $1. Display an error message for failed installs so the
# user will know to try again.
install_get_files () {
	local _f _src=$1

	ask "Ready to ${MODE} sets?" y
	case $resp in 
	n*|N*)	return ;;
	esac

	echo
	for _f in $GET_FILES ; do
		echo "Getting ${_f} ..."
		case $_f in
		*.tar.gz|*.tgz)
			ftp ${_ftp_active} -o - -V -m "${_src}/${_f}" | tar zxpf - -C /mnt
			;;
		*)
			ftp ${_ftp_active} -o "/mnt/${_f}" -V -m "${_src}/${_f}"
			;;
		esac
		if [ $? -ne 0 ]; then
			echo "'${_f}' did not install correctly."
		else
			SETSDONE=`addel ${_f} ${SETSDONE}`
		fi
	done
}

# Encode $1 as specified for usercodes and passwords in RFC 1738
# section 3.1, and now supported by our in-tree ftp:
#
#    ':' -> '%3a'
#    '@' -> '%40'
#    '/' -> '%2f'
#
# *NOTE* quotes around $1 are required to preserve trailing or
# embeddded blanks in usercodes and passwords!
encode_for_url() {
	echo "$1" | sed -e 's/:/%3a/g' -e 's/@/%40/g' -e 's/\//%2f/g'
}

# Get several parameters from the user, and xfer
# files from the server.
# $1 = url type (ftp or http)
# Note:	_ftp_server_ip, _ftp_server_dir, _ftp_server_login,
#	_ftp_server_password, and _ftp_active must be global.
install_url() {
	local _f _file_list _url_type=$1 _url_base _url_login _url_pass _oifs

	donetconfig

	# Proxy the connections?
	: ${_proxy_host:=none}

	ask "HTTP/FTP proxy URL? (e.g. 'http://proxy:8080', or 'none')" "$_proxy_host"
	if [ "$resp" = "none" ]; then
		unset _proxy_host ftp_proxy http_proxy
	else
		_proxy_host=$resp
		export ftp_proxy=${_proxy_host}
		export http_proxy=${_proxy_host}
	fi

	# Provide a list of possible servers
	: ${_ftp_getlist:=y}

	ask "Do you want to see a list of potential ${_url_type} servers?" "$_ftp_getlist"
	case $resp in
	n*|N*)	_ftp_getlist=n
		;;
	*)
		_ftp_getlist=y
		# ftp.openbsd.org == 129.128.5.191 and will remain at
		# that address for the forseeable future.
		ftp ${_ftp_active} -V -a -o /tmp/ftplist ftp://129.128.5.191/pub/OpenBSD/${VERSION_MAJOR}.${VERSION_MINOR}/ftplist > /dev/null
		grep "^${_url_type}:" /tmp/ftplist | cat -n | less -XE
		;;
	esac

	# Get server IP address or hostname
	resp=
	while [ -z "$resp" ] ; do
		if [ ! -f /tmp/ftplist ]; then
			eval ask \"Server IP address, or hostname?\" \"\$_${_url_type}_server_ip\"
			continue;
		fi
	
		eval ask \"Server IP address, hostname, or list#?\" \"\$_${_url_type}_server_ip\"

		case $resp in
		"?")
			grep "^${_url_type}:" /tmp/ftplist | cat -n | less -XE
			resp=
			;;
		+([0-9]))
			maxlines=`grep "^${_url_type}:" /tmp/ftplist | sed -ne '$='`

			if [ $maxlines -lt $resp -o $resp -lt 1 ]; then
				echo "There is no ${resp}th line in the list."
			else	
				tline=`grep "^${_url_type}:" /tmp/ftplist | sed -ne "${resp}p"`
				url=`echo $tline | sed -e "s/^${_url_type}:\/\///" |
					cutword -t' ' 1 | cutword -t' ' 1`
				host=`echo $url | cutword -t/ 1`
				path=`echo $url | sed -e "s/^${host}\///"`
				path=${path}/${VERSION_MAJOR}.${VERSION_MINOR}/${ARCH}
				eval _${_url_type}_server_ip=$host
				eval _${_url_type}_server_dir=$path
				echo "Using	$tline"
			fi

			# Always do it again, just to double check
			resp=
			;;
		*)
			;;
		esac
	done

	eval _${_url_type}_server_ip=$resp

	# Some older servers lie about their support for passive mode ftp, so
	# ask the user if it worth trying passive mode to the chosen server.
	# Irrelevant if using a proxy.
	if [ "$_url_type" = "ftp" -a -z "$ftp_proxy" ]; then
		case $_ftp_active in
		-A)	resp=n ;;
		*)	resp=y ;;
		esac

		ask "Does the server support passive mode ftp?" "$resp"
		case $resp in
		n*|N*)	_ftp_active=-A ;;
		*)	unset _ftp_active ;;
		esac
	fi

	# Get server directory
	if [ "$_url_type" = "ftp" -a -z "$_ftp_server_dir" ] ; then
		# Default ftp dir
		_ftp_server_dir=pub/OpenBSD/${VERSION_MAJOR}.${VERSION_MINOR}/${ARCH}
	fi

	eval ask_until \"Server directory?\" \"\$_${_url_type}_server_dir\"
	eval _${_url_type}_server_dir=$resp

	if [ "$_url_type" = "ftp" ]; then
		# Get login name, setting IFS to nothing so trailing or
		# embedded blanks are preserved!
		_oifs=$IFS
		IFS=
		ask_until "Login?" "${_ftp_server_login:=anonymous}"
		_ftp_server_login=$resp

		# Get password unless anonymous
		_ftp_server_password=root@`hostname`.$FQDN
		if [ "$_ftp_server_login" != "anonymous" ]; then
			resp=
			while [ -z "$resp" ] ; do
				askpass "Password (will not echo):"
			done
			_ftp_server_password=$resp
		fi
		IFS=$_oifs
	fi

	# Build up the base url since it is so nasty...
	if [ "$_url_type" = "ftp" -a "$_ftp_server_login" != "anonymous" ]; then
		_url_login=`encode_for_url "$_ftp_server_login"`
		_url_pass=`encode_for_url "$_ftp_server_password"`
		_url_base=ftp://${_url_login}:${_url_pass}@${_ftp_server_ip}/${_ftp_server_dir}
	else
		eval _url_base=${_url_type}://\$_${_url_type}_server_ip/\$_${_url_type}_server_dir
	fi

	# Get list of files from the server.
	# XXX - check for nil $_file_list and deal
	if [ "$_url_type" = "ftp" -a -z "$ftp_proxy" ] ; then
		_file_list=`ftp_list_files "$_ftp_server_ip" "$_ftp_server_login" "$_ftp_server_password" "$_ftp_server_dir"`
	else
		# Assumes index file is "index.txt" for http (or proxy)
		# We can't use index.html since the format is server-dependent
		_file_list=`ftp -o - -V "${_url_base}/index.txt" | sed 's/
//'`
	fi

	get_get_files "$_file_list" "`eval echo \\$_${_url_type}_server_dir`"

	# User may have selected no files
	[ "$GET_FILES" ] || return

	install_get_files "$_url_base"
}

# $1 - mount point directory is relative to
# $2 - default directory
install_mounted_fs() {
	local _f

	get_setsdir "$1" "$2"

	[ -d "$SETSDIR" ] || return

	get_get_files "`ls -l ${SETSDIR}`" "$SETSDIR"

	# User may have selected no files
	[ "$GET_FILES" ] || return

	install_get_files "file:$SETSDIR"
}

install_cdrom() {
	local _drive _part _fstype _directory _n

	ask_which "CD-ROM" "contains the ${MODE} media?" "$CDDEVS" "`echo $CDDEVS | cutword 1`"
	[ "$resp" = "done" ] && return

	_drive=$resp

	# If it is an ISO9660 CD-ROM, we don't need to ask any other questions
	_n=0
	until disklabel $_drive >/tmp/label.$_drive 2>&1; do
		# Try up to 6 times to access the CD
		if egrep -q '(Input/output error)|(sector size 0)' /tmp/label.$_drive; then
			_n=$(( $_n + 1 ))
			if [ _n -le 5 ]; then
				echo "I/O error accessing $_drive; retrying"
				sleep 10
			else
				echo "Cannot access $_drive."
				return
			fi
		else
			break
		fi
	done

	echo
	if grep -q '^ *c: .*ISO9660' /tmp/label.$_drive; then
		_fstype=cd9660
		_part=c
	else
		# Get partition from user
		resp=
		while [ -z "$resp" ] ; do
			ask "CD-ROM partition to mount? (normally 'c')" c
			case $resp in
			[a-p])
				_part=$resp
				;;
			*)	echo "Invalid response: $resp"
				# force loop to repeat
				resp=
				;;
			esac
		done

		# Ask for filesystem type
		cat << __EOT

Two CD-ROM filesystem types are currently supported by this program:
cd9660		ISO-9660
ffs		Berkeley Fast Filesystem

__EOT
		resp=
		while [ -z "$resp" ] ; do
			ask "Which filesystem type?" cd9660
			case $resp in
			cd9660|ffs)
				_fstype=$resp
				;;
			*)	echo "Invalid response: '$resp'"
				# force loop to repeat
				resp=
				;;
			esac
		done
	fi

	rm -f /tmp/label.$_drive

	# Mount the CD-ROM
	if ! mount -t ${_fstype} -o ro /dev/${_drive}${_part} /mnt2 ; then
		echo "Cannot mount CD-ROM drive."
		return
	fi

	install_mounted_fs /mnt2 "${VERSION_MAJOR}.${VERSION_MINOR}/${ARCH}"
	umount -f /mnt2 > /dev/null 2>&1
}

mount_a_disk() {
	# Mount a disk on /mnt2. The set of disk devices to choose from
	# is $DKDEVS.
	# returns 0 on success, 1 on failure

	local _drive _def_partition _partition_range _partition
	local _fstype _fsopts

	ask_which "disk" "contains the ${MODE} sets?" "$DKDEVS" "`echo $DKDEVS | cutword 1`"
	[ "$resp" = "done" ] && return 1

	_drive=$resp

	# Get partition
	cat << __EOT

The following partitions have been found on $_drive:

__EOT
	disklabel $_drive 2>/dev/null | grep '^  .:'
	echo
	_likely_partition_range=`disklabel $_drive 2>/dev/null | \
		sed -n	-e '/swap/s/.*//' -e '/unused/s/.*//' \
			-e '/^  .:/{s/^  \(.\).*/\1/;H;}' \
			-e '${g;s/\n//g;s/^/[/;s/$/]/p;}'`
	_partition_range=`disklabel $_drive 2>/dev/null | \
		sed -n	-e '/^  .:/{s/^  \(.\).*/\1/;H;}' \
			-e '${g;s/\n//g;s/^/[/;s/$/]/p;}'`
	_def_partition=`echo $_likely_partition_range | \
		sed -n 's/^\[\(.\).*\]/\1/p'`
	if [ -z "$_def_partition" ]; then
		_def_partition=`echo $_partition_range | \
			sed -n 's/^\[\(.\).*\]/\1/p'`
		if [ -z "$_def_partition" ]; then
			echo "There are no usable partitions on that disk"
			return 1
		fi
	fi

	resp=
	while [ -z "$resp" ]; do
		ask "Partition?" "$_def_partition"
		case $resp in
		$_partition_range)
			_partition=$resp
			;;
		*)	echo "Invalid response: $resp"
			# force loop to repeat
			resp=
			;;
		esac
	done

	# Ask for filesystem type
	cat << __EOT

The following filesystem types are supported:
default		(deduced from the disklabel)
ffs
$MDFSTYPE
__EOT

	resp=
	while [ -z "$resp" ]; do
		ask "Which filesystem type?" default
		case $resp in
		default)
			;;
		ffs)	_fstype="-t ffs"
			_fsopts=async
			;;
		$MDFSTYPE)
			_fstype="-t $resp"
			_fsopts=$MDFSOPTS
			;;
		*)	echo "Invalid response: $resp"
			# force loop to repeat
			resp=
			;;
		esac
	done

	# Mount the disk read-only
	if ! mount $_fstype -o ro,$_fsopts /dev/${_drive}${_partition} /mnt2; then
		echo "Cannot mount disk."
		return 1
	fi

	return 0
}

install_disk() {
	if mount_a_disk; then
		install_mounted_fs /mnt2
		umount -f /mnt2 > /dev/null 2>&1
	fi
}

install_nfs() {
	# Can we actually mount NFS filesystems?
	if [ ! -f /sbin/mount_nfs ]; then
		echo "/sbin/mount_nfs not found. Cannot mount NFS filesystems."
		return
	fi

	donetconfig

	# Get the IP address of the server
	ask_until "Server IP address or hostname?" "$_nfs_server_ip"
	_nfs_server_ip=$resp

	# Get server path to mount
	ask_until "Filesystem on server to mount?" "$_nfs_server_path"
	_nfs_server_path=$resp

	# Determine use of TCP
	ask "Use TCP transport? (only works with capable NFS server)" n
	case $resp in
	y*|Y*)	_nfs_tcp=-T
		;;
	*)	_nfs_tcp=
		;;
	esac

	# Mount the server
	if ! mount_nfs $_nfs_tcp -o ro ${_nfs_server_ip}:${_nfs_server_path} /mnt2 ; then
		echo "Cannot mount NFS server."
		return
	fi

	install_mounted_fs /mnt2
	umount -f /mnt2 > /dev/null 2>&1
}

install_tape() {
	local _xcmd

	# Get the name of the tape from the user.
	cat << __EOT

The installation program needs to know which tape device to use. Make
sure you use a "no rewind on close" device.

__EOT
	ask_until "Name of tape device?" "${TAPE##*/}"
	TAPE=/dev/${resp##*/}
	if [ ! -c $TAPE ]; then
		echo "$TAPE does not exist or is not a character special file."
		return
	fi
	export TAPE

	# Rewind the tape device
	echo -n "Rewinding ${TAPE} (mt rewind)..."
	if ! mt rewind ; then
		echo "FAILED."
		return
	fi
	echo "done."

	# Get the file number
	resp=
	while [ -z "$resp" ]; do
		ask "File number?"
		case $resp in
		[1-9]*)	_nskip=$(( $resp - 1 ))
			;;
		*)	echo "Invalid file number ${resp}."
			# force loop to repeat
			resp=
			;;
		esac
	done

	# Skip to correct file.
	if [ $_nskip -ne 0 ]; then
		echo -n "Skipping to source file (mt fsf ${_nskip})..."
		if ! mt fsf $_nskip ; then
			echo "FAILED. Could not skip $_nskip files."
			return
		fi
		echo "done."
	fi

cat << __EOT

There are 2 different ways the file can be stored on tape:

1) an image of a gzipped tar file
2) a standard tar image

__EOT

	resp=
	while [ -z "$resp" ]; do
		ask "Which way is it?" 1
		case $resp in
		1)	_xcmd="tar -zxvpf -"
			;;
		2)	_xcmd="tar -xvpf -"
			;;
		*)	echo "Invalid response: $resp."
			# force loop to repeat
			resp=
			;;
		esac
		( cd /mnt; dd if=$TAPE | $_xcmd )
	done
	echo "Extraction complete."
}

set_timezone() {
	local _zoneroot=/mnt/usr/share/zoneinfo/ _zonepath

	# If the timezone directory structure is not
	# available, return immediately.

	[ ! -d $_zoneroot ] && return

	if [ -L /mnt/etc/localtime ]; then
		TZ=`ls -l /mnt/etc/localtime 2>/dev/null | cutlast`
		TZ=${TZ#${_zoneroot#/mnt}}
	fi

	: ${TZ:=GMT}

	while : ; do
		_zonepath=$_zoneroot

		ask "What timezone are you in? ('?' for list)" "$TZ"

		if [ "$resp" = "?" ]; then
			ls -F ${_zonepath}
			continue;
		fi

		_zonepath=${_zonepath}${resp}

		while [ -d "$_zonepath" ]; do
			echo -n "Select a sub-timezone of "
			ask "'${_zonepath#$_zoneroot}' ('?' for list):"
			if [ "$resp" = "?" ]; then
				ls -F ${_zonepath}
			else
				_zonepath=${_zonepath}/${resp}
			fi
		done

		if [ -f "$_zonepath" ]; then
			TZ=${_zonepath#$_zoneroot}
			echo "You have selected timezone '$TZ'".
			ln -sf /usr/share/zoneinfo/$TZ /mnt/etc/localtime
			return
		fi

		echo -n "'${_zonepath#$_zoneroot}'"
		echo " is not a valid timezone on this system."
	done
}

sane_install() {
	if [ ! -s /mnt/bsd ]; then
		cat << __EOT

Warning, no kernel (/mnt/bsd) installed! You did not unpack a file set
containing a kernel -- this is needed to boot. Please note that the install
kernel is *not* suitable for general use.
__EOT
	elif [ ! -f /mnt/bin/cat ]; then
		cat << __EOT

You still do not have a /bin/cat in your filesystem (i.e. a sample random file
which you probably want). This seems to indicate that you are still missing
important distribution files.
__EOT
	elif [ ! -x /mnt/dev/MAKEDEV ]; then
		cat << __EOT

No /dev/MAKEDEV has been installed yet.
__EOT

	elif [ ! -d /mnt/etc -o ! -d /mnt/usr/share/zoneinfo -o ! -d /mnt/dev ]; then
		cat << __EOT

One or more of /etc, /usr/share/zoneinfo or /dev is missing. Did you
forget to extract a required set?
__EOT
	else
		return 0
	fi

	cat << __EOT

You can now try to install the missing set(s), or you can enter '!' at the
prompt to escape to a shell and fix things by hand.
__EOT

	return 1
}

# Ask the user for locations of sets, and then install whatever sets the
# user selects from that location. Repeat as many times as the user
# needs to get all desired sets.
install_sets() {
 	cat << __EOT

You will now specify the location and names of the ${MODE} sets you want to
load. You will be able to repeat this step until all of your sets have been
successfully loaded. If you are not sure what sets to ${MODE}, refer to the
installation notes for details on the contents of each.
__EOT

	while : ; do
		cat << __EOT

Sets can be located on a (m)ounted filesystem; a (c)drom, (d)isk or (t)ape
device; or a (f)tp, (n)fs or (h)ttp server.
__EOT
		ask "Where are the ${MODE} sets you want to use? (m, c, f, etc.)"

		case $resp in
		c*|C*)	install_cdrom
			;;
		d*|D*)	install_disk
			;;
		f*|F*)	install_url ftp
			;;
		h*|H*)	install_url http
			;;
		m*|M*)	install_mounted_fs /mnt
			;;
		n*|N*)	install_nfs
			;;
		t*|T*)	install_tape
			;;
		*)	echo "Invalid response: $resp"
			;;
		esac

		# Give the user the opportunity to extract more sets.

		ask "Extract more sets?" n
		case $resp in
		n*|N*)	# Perform sanity checks...
			sane_install && break
			ask "\nDo you want to extract more sets?" y
			case $resp in 
			n*|N*)	break
				;;
			esac
			;;
		esac
	done
}

# Create a /etc/fstab from /tmp/fstab. Ensure /etc/fstab
#	1) contains only ffs filesystems
#	2) contains only filesystems without the 'noauto' option
#	3) contains no 'softdep' options
#	4) mounts all filesystems relative to /mnt
#
# If no /etc/fstab is created, do not proceed with install/upgrade.
munge_fstab() {
	local _dev _mp _fstype _opt _rest

	while read _dev _mp _fstype _opt _rest; do
		# Skip comment lines.
		case $_dev in
		\#*)	continue ;;
		esac

		# Skip noauto filesystems.
		case $_opt in
		*noauto*) continue ;;
		esac

		# Skip filesystems we can't mount.
		[ -f "/sbin/mount_${_fstype}" ] || continue

		# Skip nfs filesystems because all name
		# resolutions (e.g. yp) are not available
		# and success is not guaranteed. The user
		# will have to mount nfs filesystems manually.
		[ "$_fstype" != "nfs" ] || continue
		
		# Remove any softdep options, as soft updates are not
		# available in the ramdisk kernels.
		_opt="$(echo ${_opt} | \
			sed -e 's/^softdep$//; s/^softdep,//; s/,softdep,/,/; s/,softdep$//;')"

		# Mount non-ffs filesystems read-only
		[ "$_fstype" = "ffs" ] || \
			_opt="$(echo ${_opt} | \
				sed -e 's/^rw$/ro/; s/^rw,/ro,/; s/,rw,/,ro,/; s/,rw$/,ro/')"

		# Avoid '/mnt/' in root fs entry in munged fstab
		[ "$_mp" = "/" ] && _mp=

		# Write fs entry in fstab.
		echo $_dev /mnt$_mp $_fstype $_opt $_rest

	done < /tmp/fstab > /etc/fstab
	
	# If no /etc/fstab was created, we have nowhere to ${MODE} to.
	if [ ! -s /etc/fstab ]; then
		echo "Unable to create valid /etc/fstab."
		exit
	fi
}

# Must mount filesystems manually, one at a time, so we can make
# sure the mount points exist.
mount_fs() {
	local _async=$1 _dev _mp _fstype _opt _rest

	while read _dev _mp _fstype _opt _rest; do
		# If not the root filesystem, make sure the mount
		# point is present.
		[ "$_mp" = "/mnt" ] || mkdir -p $_mp

		# Mount the filesystem. If the mount fails, exit.
		if ! mount -v -t $_fstype $_async -o $_opt $_dev $_mp ; then
			# In addition to the error message displayed by mount ...
			cat << __EOT

FATAL ERROR:	Cannot mount filesystems. Double-check your configuration
		and restart the ${MODE}.

__EOT
			exit
		fi
	done < /etc/fstab
}

# Script is exiting. Clean up as much as possible.
cleanup_on_exit() {
	echo "\nCleaning up..."

	# Kill any running dhclient, so a restart will not
	# find /dev/bpf0 busy.

	if [ -f /var/run/dhclient.pid ]; then
		echo "Stopping dhclient"
		kill -HUP `sed -ne "1p" /var/run/dhclient.pid` > /dev/null 2>&1
		rm -f /var/run/dhclient.pid
	fi

	if [ -f /etc/fstab ]; then
		umount -av
	elif [ ! "`df /`" = "`df /mnt`" ]; then
		umount -v /mnt
	fi

	echo "Done."
}

# Remount all filesystems in /etc/fstab with the options from
# /etc/fstab, i.e. without any options such as async which
# may have been used in the first mount.
remount_fs() {
	local _dev _mp _fstype _opt _rest

	while read _dev _mp _fstype _opt _rest; do
		mount -u -o $_opt $_dev $_mp ||	exit
	done < /etc/fstab
}

# Preen all filesystems in /etc/fstab that have a /sbin/fsck_XXX,
# showing individual results, but skipping $ROOTDEV. This was already
# fsck'ed successfully.
#
# Exit if any fsck's fail (but do them all before exiting!).
check_fs() {
	local _dev _mp _fstype _rest _fail

	echo "Checking non-root filesystems..."

	while read _dev _mp _fstype _rest; do
		[ "$_dev" != /dev/"$ROOTDEV" ] || continue
		[ -f "/sbin/fsck_$_fstype" ] || continue
		# Make sure device exists before fsck'ing it.
		_rest=${_dev#/dev/}
		makedev ${_rest%[a-p]} || continue
		echo -n "fsck -p ${_dev}..."
		if ! fsck -fp ${_dev} > /dev/null 2>&1; then
			echo "FAILED. You must fsck $_dev manually."
			_fail=y
		else
			echo "OK."
		fi
	done < /etc/fstab

	echo "...Done."

	[ "$_fail" ] && exit
}

# Find LAST instance of DOMAIN or SEARCH and extract first domain name
# on that line as FQDN. Then ask user, just to be sure.
# $1 = resolv.conf file to search for FQDN
# $2 = hosts file to add FQDN information to
get_fqdn() {
	if [ -f "$1" ]; then
		FQDN=`sed -n \
			-e '/^domain[[:space:]][[:space:]]*/{s///;s/\([^[:space:]]*\).*$/\1/;h;}' \
			-e '/^search[[:space:]][[:space:]]*/{s///;s/\([^[:space:]]*\).*$/\1/;h;}' \
			-e '${g;p;}' $1`
	fi

	if [ -f "$2" -a -n "$FQDN" ]; then
		# Add FQDN to hosts file entries created by addhostent, changing
		# lines like
		#    1.2.3.4 hostname
		# to
		#    1.2.3.4 hostname.$FQDN hostname
		sed "s/\\(.*\\)[[:space:]]\\(.*\\)\$/\\1 \\2.$FQDN \\2/" $2 > $2.new
		mv $2.new $2
	else
		ask "Enter DNS domain name (e.g. 'bar.com'):" "$FQDN"
		FQDN=$resp
	fi
}

donetconfig() {
	local _nam

	[ "$DIDNET" ] && return

	DIDNET=y

	[ -f /tmp/myname ] && _nam=`cat /tmp/myname`

	# chop off any fqdn that may be present in /tmp/myname.
	_nam=${_nam%%.*}

	ask_until "Enter system hostname (short form, e.g. 'foo'):" "$_nam"
	hostname $resp
	echo $resp > /tmp/myname

	# Always create new hosts file. If install.sh has been
	# restarted, an existing one may contain information which
	# will conflict with the information about to be entered.
	# Also ensures logic to put FQDN in hosts file will create
	# hosts file lines in correct format.
	echo "::1 localhost\n127.0.0.1 localhost" > /tmp/hosts

	# Remove any existing hostname.* files. If install.sh has
	# been restarted, this ensures a correct list of configured
	# interfaces is displayed, and gives the user a chance to
	# change which interfaces are to be configured.
	rm -f /tmp/hostname.*

	# Revoke any previous decision on whether or not to use
	# a nameserver during installation.
	rm -f /tmp/resolv.conf.shadow

	cat << __EOT

If any interface will be configured by DHCP, you should not enter
information that will be supplied via DHCP, e.g. the DNS domain name.

__EOT

	FQDN=
	get_fqdn /tmp/resolv.conf

	configure_all_interfaces

	# As dhclient will populate /etc/resolv.conf, a symbolic link to
	# /tmp/resolv.conf.shadow, mv any such file to /tmp/resolv.conf
	# so it will eventually be copied to /mnt/etc/resolv.conf and will
	# not in the meantime remove the user's ability to choose to use it
	# or not, during the rest of the install.
	if [ -f /tmp/resolv.conf.shadow ]; then
		mv /tmp/resolv.conf.shadow /tmp/resolv.conf
	fi

	# Get any DHCP supplied FQDN, and in any case apply FQDN to
	# the host names in /tmp/hosts, all without asking for any more
	# user confirmation. This means DHCP supplied information will
	# override a user supplied (or previous DHCP supplied) FQDN.
	get_fqdn /tmp/resolv.conf /tmp/hosts

	# Also add FQDN to myname
	if [ "$FQDN" ]; then
		sed "s/\\(.*\\)\$/\\1.${FQDN}/" /tmp/myname > /tmp/myname.new
		mv /tmp/myname.new /tmp/myname
	fi

	resp=`route -n show | sed -ne '/^default */{
		s///
		s/ .*//
		p
	}'`
	if [ -z "$resp" ] ; then
		resp=none
		if [ -f /tmp/mygate ]; then
			resp=`cat /etc/mygate`
			: ${_resp:=none}
		fi
	fi
	ask "Enter IP address of default route:" "$resp"
	if [ "$resp" != "none" ]; then
		route delete default > /dev/null 2>&1
		if route add default $resp > /dev/null ; then
			echo $resp > /tmp/mygate
		fi
	fi

	resp=none
	if [ -f /tmp/resolv.conf ]; then
		resp=
		for n in `sed -ne '/^nameserver /s///p' /tmp/resolv.conf`
			do
			if [ -z "$resp" ] ; then
				resp=$n
			else
				resp="$resp $n"
			fi
		done
	fi
	ask "Enter IP address of primary nameserver:" "$resp"
	if [ "$resp" != "none" ]; then
		echo "search $FQDN" > /tmp/resolv.conf
		for n in `echo ${resp}`; do
			echo "nameserver $n" >> /tmp/resolv.conf
		done
		echo "lookup file bind" >> /tmp/resolv.conf

		ask "Would you like to use the nameserver now?" y
		case $resp in
		y*|Y*)	cp /tmp/resolv.conf /tmp/resolv.conf.shadow
			;;
		esac
	fi

	if [ ! -f /tmp/resolv.conf.shadow ]; then
		echo "\nThe host table contains:\n"
		cat /tmp/hosts
		ask "\nWould you like to edit the host table with ${EDITOR}?" n
		case $resp in
		y*|Y*)	${EDITOR} /tmp/hosts
			;;
		esac
	fi

	ask "Do you want to do more, manual, network configuration?" n
	case $resp in
	y*|Y*)	echo "Type 'exit' to return to install."
		sh
		;;
	esac
}

populateusrlocal() {
	if [ -f /mnt/etc/mtree/BSD.local.dist ]; then
		/mnt/usr/sbin/chroot /mnt /usr/sbin/mtree -Uedqn -p /usr/local -f /etc/mtree/BSD.local.dist >/dev/null
	fi
}

set_machdep_apertureallowed() {
	[ "$MDXAPERTURE" ] || return

	ask "Do you expect to run the X Window System?" y
	case $resp in
	y*|Y*)
		sed -e "/^#\(machdep\.allowaperture=${MDXAPERTURE}\)/s//\1	/" \
			/mnt/etc/sysctl.conf > /tmp/sysctl.conf
		;;
	esac
}

finish_up() {
	set_timezone

	echo -n "Making all device nodes (by running /dev/MAKEDEV all) ..."
	cd /mnt/dev
	sh MAKEDEV all
	echo "... done."
	cd /

	md_installboot $ROOTDISK

	populateusrlocal

	[ -x /mnt/${MODE}.site ] && /mnt/usr/sbin/chroot /mnt /${MODE}.site

	# Disable trap(s) that do cleanup on exit. With success comes a 
	# reboot which washes away all sins.
	trap - HUP INT QUIT TERM EXIT

	# Pat on the back.
	cat << __EOT

CONGRATULATIONS! Your OpenBSD ${MODE} has been successfully completed!
To boot the new system, enter halt at the command prompt. Once the
system has halted, reset the machine and boot from the disk.
__EOT

	md_congrats
}

# #######################################################################
#
# Initial actions common to both installs and upgrades.
#
# Some may require machine dependent routines, which may
# call functions defined above, so it's safest to put this
# code here rather than at the top of the file.
#
# #######################################################################

ROOTDISK=
ROOTDEV=
VERSION=32
VERSION_MAJOR=$(( $VERSION / 10 ))
VERSION_MINOR=$(( $VERSION % 10 ))
export VERSION VERSION_MAJOR VERSION_MINOR

# Extract and save one boot's worth of dmesg
dmesg | sed -ne '/^OpenBSD /h;/^OpenBSD /!H;${g;p;}' > /var/run/dmesg.boot

# Scan /var/run/dmesg.boot for disks and cds
DKDEVS=`get_dkdevs`
CDDEVS=`get_cddevs`
IFDEVS=`get_ifdevs`

# extra "site" set can be provided by person doing install or upgrade.
THESETS="base etc misc comp man game xbase xshare xfont xserv site $MDSETS"

# Global variable using during sets installation
SETS=
SETSDIR=
SETSDONE=
GET_FILES=

# decide upon an editor
if [ -z "$EDITOR" ] ; then
	EDITOR=ed
	[ -x /usr/bin/vi ] && EDITOR=vi
	export EDITOR
fi

# Cleanup if the script exit prematurely.
trap 'cleanup_on_exit' EXIT
trap 'exit 2' HUP INT QUIT TERM

# Introduce ourselves.
welcome

# Get ROOTDISK and default ROOTDEV 
get_rootdisk