path: root/distrib/notes/i386/hardware

dnl	$OpenBSD: hardware,v 1.91 2002/10/14 21:00:25 gluk Exp $
OpenBSD/MACHINE OSREV works across a broad range of standard PC's and
clones, with a wide variety of processors and I/O bus architectures.  It
can be expected to install and run with minimal difficulties on most
current products.  The cases where problems may be encountered are
typically older proprietary PC's, laptops or specialized server boxes
that rely on a custom BIOS to paper over implementation differences.

OpenBSD does not currently support multiple processors (SMP), but will
run using one processor on a multi-processor system board.

The minimal configuration to install the system is 12M or 16M of RAM and
perhaps 100M of disk space.  A custom kernel might be able to run with only
8MB.  To install the entire system requires much more disk space, and to run
X or compile the system, more RAM is recommended.  (16M of RAM will actually
allow you to run X and/or compile but it won't be speedy. Note that until
you have around 32M of RAM, getting more RAM is more important than getting
a faster CPU.)

Supported hardware {:-include-:}:
	Processors
		All CPU chips compatible with the Intel 80386 (MACHINE)
		architecture:
			386/486 (SX/DX/DX2/DX4)
			Intel Pentium/Pentium-MMX
			Intel Pentium Pro/II/III/Celeron/Xeon
			Intel Pentium IV
			AMD 6x86
			AMD K5/K6/K6-2/K6-3
			AMD Athlon/Duron
			Cyrix MediaGX/M1/M2
			VIA Cyrix III
			Rise mP6
			IDT WinChip
			NexGen 586
			NS Geode GX1
			Transmeta TMS3200, TMS5400, TMS5600
		Everything that is a clone of the 386 or up should work
		fine. The only CPU that is known to work poorly (due to
		flawed motherboards designs) is the Cyrix 386DLC.
	Buses
		All standard ISA, EISA, VLB, and PCI bus based machines,
		including:
			Intel 450GX/KX based machines
			Intel 450NX based machines
			ServerWorks chipset-based machines
			(We just had to mention those last three, since
			 they are the hardest to support)
		Both 16-bit PCMCIA Cards and newer 32-bit CardBus
		support
		Universal Serial Bus (USB)
		The MCA bus found in various IBM PS/2 machines is not
		supported.
	Bus Interfaces
		Standard PCI-PCI bridges, including PCI expansion
		backplanes
		YENTA-compatible PCI-CardBus bridges
	Entropy Sources
		Interrupt latency collection from many devices
		Intel 82802 random number generator found on i810, i815,
		i820, i840, i850 and i860 based systems.
	Disk Controllers
		Floppy controllers.
		ISA MFM, ESDI, IDE, and RLL hard disk controllers.
	PCI IDE Controllers
		Acard ATP850, ATP860
		Acer Labs M5229
		Advanced Micro Devices 756, 766
		CMD Tech PCI0640, PCI0643, PCI0646, PCI0648, PCI0649 and PCI0680
		Contaq Microsytems/Cypress CY82C693
		HighPoint HPT366, HPT370, HPT372, HPT374 (as IDE interfaces,
		    not RAID controllers)
		Intel PIIX, PIIX3, and PIIX4
		Intel 82801 (ICH/ICH0/ICH2/ICH3/ICH4)
		National Semiconductor PC87415
		Promise PDC20246, PDC20262, PDC20265/7/8/8R/9, 20271/6
		    (but the Promise RAID mode is not supported)
		Silicon Integrated Systems 5513 (5597/5598)
		VIA Technologies VT82C586A/B, VT82C596A/B, VT82C686A/B
		(Other PCI IDE-compliant controllers should work, but
		 those not listed above may not be capable of DMA modes)
	SCSI Host Adapters
		Adaptec AHA-1540, AHA-154xA, AHA-154xB, AHA-1542C,
		    AHA-1542CF, AHA-1542CP, AHA-1640 [B] [C]
		Adaptec AHA-174x [B] [C]
		Adaptec AIC-6260 and AIC-6360 based boards, including: [B]
		    the Adaptec AHA-152x and the SoundBlaster SCSI host adapter.
		    (Note that you cannot boot from these boards if they do not
		    have a boot ROM; only the AHA-152x and motherboards using
		    this chip are likely to be bootable, consequently.)
		Adaptec AIC-7770-based boards, including the Adaptec
		    AHA-274x and AHA-284x families) [C]
		Adaptec AHA-[23]94x[W] cards and some on-board PCI designs
		    using the AIC7870 and AIC7880 chips. [C]
		Adaptec AHA-[23]94xU[2W] cards and some on-board PCI designs
		    using the AIC789[01], AIC7895, AIC789[67] chips [C]
		Adaptec AIC-789[29] chips and products like the
		    AHA-29160 based upon it which do 160MB/sec SCSI. [C]
		    (However, the 7899G card is currently not supported with
		     more than one device attached)
		AdvanSys 'U', 'UW', 'U2W' and 'U160' PCI SCSI
		    controllers including the ABP940U[AW],
		    ASB3940U[AW]-00, ASB3940U2W-00 and ASB3950U160 [A] [B] [C]
		AMD Am53c974 PCscsi-PCI SCSI controllers, including: [A] [C]
		    Tekram DC-390
		Buslogic BT-54x (Adaptec AHA-154x clones) [B] [C]
		BusLogic 445, 74x, 9xx  (but not the new "FlashPoint" series
		    of BusLogic SCSI adapters) [B] [C]
		Initio INIC-940 and INIC-950 based PCI SCSI host
		  adapters, including: [A] [C]
		    Initio INI-9090U
		    Initio INI-9100U/UW
		    Iwill 2935UW
		    DTC Domex 3194U Plus
		QLogic PCI SCSI controllers [A]
		Seagate/Future Domain ISA SCSI adapter cards, including: [B] [C]
		    ST01/02
		    Future Domain TMC-885
		    Future Domain TMC-950
		Symbios Logic (NCR) 53C8xx, 53C1010, and 53C1510D-based
		  PCI SCSI host adapters (including generic/no name cards, old
		  ASUS cards, the DTC-3130 series, Diamond Fireport series,
		  etc.) [B] [C]
		Tekram DC-300B and DC-320E (Adaptec AHA-154x clones) [B] [C]
		Tekram DC-3x5U (DC-315U, DC-395U/UW/F) TRM-S1040 based
		  PCI SCSI host adapters [A] [C]
		Ultrastor 14f, 24f, and 34f [A] [C]
		WD-7000 SCSI host adapters [A] [B] [C]
	RAID and Cache Controllers
		3ware Escalade 3W-5x00, 3W-6x00 [A] [C]
		Adaptec FSA-based RAID controllers, including: [A] [C]
		    Adaptec AAC-2622, AAC-364, AAC-3642
		    Dell PERC 2/Si, PERC 2/QC, PERC 3/Si, PERC 3/Di,
		      PERC 3/QC
		    HP NetRAID-4M
		American Megatrends Inc. MegaRAID controllers in "Mass
		  Storage" mode [A] [C]
		Compaq Smart ARRAY PCI/EISA adapters, including: [A] [C]
		    Compaq Integrated Array
		    Compaq IAES
		    Compaq IDA, IDA-2
		    Compaq RAID LC2
		    Compaq Smart Array 221, 3100ES, 3200, 4200,
		      4250ES, 431
		    Compaq SMART, SMART-2/E, SMART-2/P, SMART-2DH,
		      SMART-2SL
		DPT SmartCache and SmartRaid III/IV PCI/EISA adapters [A] [C]
		Intel (and formerly ICP-Vortex) GDT series [A]
		I2O (intelligent I/O) RAID controllers, including: [A] [C]
		    Adaptec SCSI RAID (ASR-2100S, ASR-2110S, ASR-3200S,
		      etc)
		    American Megatrends Inc. MegaRAID controllers
		    (in I2O mode)
		    and probably other vendors' controllers supporting
		    I2O, including Intel and Mylex (untested)
	CD-ROM and DVD-ROM Drives
		Mitsumi CD-ROM drives [*]
		    [Note: The Mitsumi driver device probe is known
		    to cause trouble with several devices!]
		Most SCSI CD-ROM, CD-R, CD-RW, and DVD drives
		Most ATAPI CD-ROM, CD-R, CD-RW, and DVD drives
	Tape Drives
		Most SCSI tape drives
		Most SCSI tape changers [G]
		QIC-02 and QIC-36 format (Archive- and Wangtek-
		   compatible) tape drives [*]
	MDA, CGA, VGA, SVGA, and HGC Display Adapters.  (Note that not
		all of the display adapters OpenBSD/MACHINE
		are supported by X.  See the XFree86 FAQ for more
		information.)
	Serial Ports
		8250/16450-based ports
		16550-based ports
		ST16660-base ports
		XR16850-based ports (only in the pccom driver)
		AST-style 4-port serial boards [G]
		BOCA 8-port serial cards [*]
		Cyclades Cyclom-{4, 8, 16}Y serial boards [G]
		Cyclades-Z series multiport serial boards [G]
		IBM PC-RT 4-port serial boards [*]
		Addonics FlexPort 8S [*]
	Parallel Ports
		Any standard parallel port [G]
	Communication Controllers
		Universal Serial Bus host controllers, including:
		    USB Universal Host Controller [A] [B] [C]
		    USB Open Host Controller [A] [B] [C]
		PCI `universal' communication cards, providing serial
		  and parallel ports, including: [G]
		    Dolphin Peripherals 4014 (dual parallel) and
			4035 (dual serial)
		    SIIG Cyber 2P1S (dual parallel, single serial)
			and 2S1P (dual serial, single parallel)
		    SIIG Cyber 4S (quad serial)
		    SIIG Cyber I/O (single parallel, single serial)
		    SIIG Cyber Parallel, Parallel Dual, Serial,
			Serial Dual
		    VScom PCI 800  (8 port serial)
		    VScom PCI 011H (1 port parallel)
		    VScom PCI 100H (1 port serial)
		    VScom PCI 110H (1 port serial and 1 port parallel)
		    VScom PCI 200H (2 port serial)
		    VScom PCI 210H (2 port serial and 1 port parallel)
		    VScom PCI 400H (4 port serial)
		    VScom PCI 410H (4 port serial and 1 port parallel)
		    VScom PCI 800H (8 port serial)
		    VScom PCI 100L (1 port serial)
		    VScom PCI 200L (2 port serial)
		    VScom PCI 210L (2 port serial and 1 port parallel)
		    VScom PCI 400L (4 port serial)
		    VScom PCI 800L (8 port serial)
		    AT&T/Lucent Venus Modem (found on IBM 33L4618
			card, Actiontec 56K, and others)
		    US Robotics 3CP5609 PCI (modem)
		    Lava Computers 2SP-PCI (parallel port)
		    Lava Computers 2SP-PCI and Quattro-PCI (dual
			serial)
		    NEC PK-UG-X008 (serial)
		    NEC PK-UG-X001 K56flex PCI (modem)
		    Koutech IOFLEX-2S (dual serial)
		    Syba Tech Ltd. PCI-4S2P-550-ECP (4 port serial, 2
			port parallel)
		    Moxa Technologies Co., Ltd. PCI I/O Card 4S (4 port
			serial)
		    NetMos 2S1P (2 port serial and 1 port parallel)
		    Boca Research Turbo Serial 654 PCI (4 port serial)
		    Boca Research Turbo Serial 658 PCI (8 port serial)
	Ethernet Adapters
		3Com 3c501 [A] [B] [C]
		3Com 3c503 [B]
		3Com 3c505 [A] [B] [C]
		3Com 3c507 [A] [B] [C]
		3Com 3c509, 3c579, and 3c59x (disabling PnP on 3c509B is
		    recommended)
		3Com 3c515 [B]
		3Com 3c9xx Etherlink XL adapters, including:
		    3Com 3c900/3c900B PCI adapters
		    3Com 3c905/3c905B/3c905C PCI adapters
		    3Com 3c980/3c980C server adapters
		    3Com 3cSOHO apapter
		    3Com 3c900B-FL and 3c900B-FL/FX fiber optic
			adapters
		    3Com 3c555/3c556/3c556B MiniPCI adapters
		    Dell on-board 3c920
		    Dell Precision on-board 3c905B
		    Dell OptiPlex GX1 on-board 3c918
		    Dell Latitude laptop docking station embedded
			3c905
		3Com 3c990 3XP Typhoon/Sidewinder PCI adapters, including: [A]
		  [B] [C]
		    3C990-TX-95
		    3C990-TX-97
		    3C990-TX-SVR95
		    3C990-TX-SVR97
		Adaptec "Starfire" AIC-6915 based PCI adapters, including: [G]
		    Adaptec Single32 ANA-69011
		    Adaptec Single64 ANA-62011 and ANA-62020
		    Adaptec Duo64 ANA-62022
		    Adaptec Quartet64 ANA-62044
		ADMtek AL981 ("Comet") and AN983 ("Centaur-P") based PCI
		adapters, including:
		    Accton EN2242 MiniPCI
		    Linksys LNE100TX v4.x
		    Mototech ME316
		ADMtek AN986-based USB adapters, including: [A] [B] [C]
		    Abocom UFE1000
		    Abocom DSB650TX
		    Accton USB320-EC
		    Accton SpeedStream Ethernet
		    Admtek Pegasus, Pegasus II
		    Billionton Systems USB100
		    Corega FEther USB-TX
		    D-Link DSB-650, 650TX, 650TX-PNA
		    Elecom LD-USB
		    Elsa Microlink USB2Ethernet
		    I/O Data USB ETTX
		    Kingston KNU101TX
		    LinkSys USB100TX, USB100H1 and USB10TA
		    Melco Inc. LUA-TX
		    Siemens SpeedStream USB
		    Smartbridces smartNIC 2
		    SMC 2202USB
		    SMC EZ Connect USB
		    SOHOware NUB100
		AMD LANCE and PCnet-based ISA Ethernet adapters, including: [B]
		    Novell NE1500T
		    Novell NE2100
		    Kingston 21xx
		AMD PCnet-based PCI Ethernet adapters, including: [B] [C]
		    BOCALANcard/PCI
		    AT&T StarLAN 10, EN100, and StarLAN Fiber
		ASIX 88140A/88141 PCI Ethernet adapters, including:
		    CNet Pro110B
		    Alfa Inc. GFC2204
		CATC USB-EL1210A-based USB adapters, including: [G]
		    CATC Netmate and Netmate II
		    Belkin F5U011/F5U111
		Davicom DM9100, DM9102, and DM9102A based PCI adapters,
		including:
		    Jaton XpressNet
		DEC EtherWORKS III adapters, including: [G]
		    DEC DE203, DE204, DE205
		Digital DC21x4x-based PCI Ethernet adapters, including:
		    Older SMC PCI EtherPower 10, 10/100 (models
		      8432, 9332, and 9334)
		    Older LinkSys 10, 10/100 (newer models are
		      supported by other drivers)
		    Znyx ZX3xx
		    Cogent EM100FX and EM440TX
		    Digital PCI DE435, EISA DE425, DE450, DE500
		    Asante 21140A
		    D-Link DFE-570TX Quad port
		Digital DC2114x-based four port cards, including:
		    Adaptec ANA-6944A
		    Cogent EM400
		    Compex 400TX
		    Znyx ZX346
		Intel EtherExpress 16 [A] [B] [C]
		Intel EtherExpross PRO/10 ISA [A] [B] [C]
		Intel i8255x-based (except the i82556) PCI adapters,
		including:
		    Intel EtherExpress PRO/10+
		    Intel EtherExpress PRO/100, PRO/100B, and PRO/100+
		    Intel EtherExpress PRO/100+ "Management Adapter"
		    Intel EtherExpress PRO/100 Dual Port
		    Intel PRO/100 VE, PRO/100 VM, and PRO/100 S
		Kawasaki LSI KL5KUSB101B-based USB adapters, including: [A]
		  [B] [C]
		    3Com 3c19250
		    3Com 3c460 HomeConnect
		    ADS Technologies USB-10T
		    Aox USB101
		    ATen UC10T
		    Corega USB-T
		    D-Link DSB-650
		    Entegra NET-USB-E45
		    Kawasaki USB101
		    LinkSys USB10T
		    Netgear EA101
		    Peracom USB
		    SMC 2102/2104USB
		    I/O Data USB-ET/T
		Lite-On PNIC/PNIC-II-based adapters, including:
		    Kingston KNE110TX
		    LinkSys LNE100TX
		    Matrox Networks FastNIC 10/100
		    Netgear FA310TX
		Macronix 98713/713A/715/715A/725/727/732-based adapters,
		including:
		    Accton EN1217
		    Addtron AEF-320TX/AEF-330TX
		    CNet PRO120A/B
		    Complex RL-100TX
		    NDC Communications SOHOware SFA110A
		    SVEC PN102-TX Fast Ethernet card
		National Semiconductor DP83815-based PCI adapters,
		  including: [B] [C]
		    Netgear FA311/FA312
		Novell NE1000, NE2000 [B]
		RealTek 8129, RealTek 8139 Ethernet adapters, including:
		    Accton MPX 5030/5038
		    Allied Telesyn AT2550
		    D-Link DFE530TX+, DFE538TX
		    Encore ENL832-TX 10/100 M PCI
		    Genius GF100TXR
		    KTX-9130TX 10/100 Fast Ethernet
		    Longshine LCS-8038TX-R
		    NDC NE100TX-E
		    Netronix EA-1210 Net Ether 10/100
		    Nortel BayStack 21
		    OvisLink LEF-8129TX, LEF-8139TX
		    SMC EZ Card 10/100 PCI 1211-TX
		RealTek RTL8150L based USB adapters, including: [G]
		    Melco Inc. LUA-KTX
		    GreenHouse GH-USB100B
		    Linksys USB100M
		SiS 900 and SiS 7016-based PCI adapters, including: [B] [C]
		    Mototech ME313
		    NetSurf NS-KFE30D
		SMC/WD 8003, 8013, and the SMC "Elite16" ISA boards [B]
		SMC/WD 8216 (the SMC "Elite16 Ultra" ISA boards) [B]
		  (See special notice later in this document)
		SMC 8416 EtherEZ PnP (with PnP mode off) [B]
		SMC 9432 (EtherPower II) EPIC 10/100 [C]
		Sundance ST201-based PCI adapters, including: [G]
		    D-Link DFE-550TX
		Texas Instruments ThunderLAN PCI adapters, including: [C]
		    Compaq Netelligent PCI Adapters
		    Compaq NetFlex 3/P
		    Compaq Deskpro integrated adapter
		    Compaq Prosignia integrated adapter
		    Olicom OC2135, OC2183, OC2325, OC2326
		    Racore 8165 and 8148
		    TI ThunderLAN adapters
		VIA Rhine/RhineII Ethernet adapters, including: [C]
		    Addtron AEF-360TX
		    Hawking PN102TX
		    D-Link DFE530TX
		Winbond W89C840F Ethernet adapters, including:
		    Trendware TE100-PCIE
		    Compex RL100-ATX 10/100baseTX
	Wireless Ethernet Adapters
		Aironet 4500/4800 802.11DS PCMCIA and PCI [A] [B]
		Cisco 340/350 802.11DS PCMCIA and PCI [A] [B]
		RayLink Aviator2.4/Pro 802.11FH PCMCIA [A] [B]
		3Com AirConnect 3CRWE737A PCMCIA [A] [B] [C]
		Addtron AWP-100 PCMCIA [A] [B] [C]
		ACTIONTEC HWC01170 PCMCIA [A] [B] [C]
		Agere Orinoco PCMCIA [A] [B] [C]
		BUFFALO AirStation PCMCIA [A] [B] [C]
		BUFFALO AirStation PCMCIA [A] [B] [C]
		Cabletron RoamAbout PCMCIA [A] [B] [C]
		Compaq Agency NC5004 PCMCIA [A] [B] [C]
		Contec FLEXLAN/FX-DS110-PCC PCMCIA [A] [B] [C]
		Corega PCC-11 PCMCIA [A] [B] [C]
		Corega PCCA-11 PCMCIA [A] [B] [C]
		Corega PCCB-11 PCMCIA [A] [B] [C]
		Corega CGWLPCIA11 PCMCIA [A] [B] [C]
		ELSA XI300 PCMCIA [A] [B] [C]
		ELSA XI800 PCMCIA [A] [B] [C]
		EMTAC A2424i PCMCIA [A] [B] [C]
		Ericsson Wireless LAN CARD C11 PCMCIA [A] [B] [C]
		Gemtek WL-311 PCMCIA [A] [B] [C]
		Hawking Technology WE110P PCMCIA [A] [B] [C]
		I-O DATA WN-B11/PCM PCMCIA [A] [B] [C]
		Intel PRO/Wireless 2011 PCMCIA [A] [B] [C]
		Intersil Prism II PCMCIA [A] [B] [C]
		Intersil Mini-PCI
		Linksys Instant Wireless WPC11 PCMCIA [A] [B] [C]
		Linksys Instant Wireless WPC11 2.5 PCMCIA [A] [B] [C]
		Lucent WaveLAN PCMCIA [A] [B] [C]
		NANOSPEED ROOT-RZ2000 PCMCIA [A] [B] [C]
		NDC/Sohoware NCP130 PCMCIA [A] [B] [C]
		NEC CMZ-RT-WP PCMCIA [A] [B] [C]
		Netgear MA401 Wireless LAN PCMCIA [A] [B] [C]
		NTT-ME 11Mbps Wireless LAN PCMCIA [A] [B] [C]
		Proxim RangeLAN-DS PCMCIA [A] [B] [C]
		Samsung MagicLAN SWL-2000N PCMCIA [A] [B] [C]
		Symbol Spectrum24 PCMCIA [A] [B] [C]
		SMC 2632 EZ Connect PCMCIA [A] [B] [C]
		TDK LAK-CD011WL PCMCIA [A] [B] [C]
		3Com AirConnect 3CRWE777A PCI
		Belkin F5D6000 PCI (a rebadged WL11000P)
		Eumitcom WL11000P PCI
		Global Sun Technology GL24110P PCI (untested)
		Global Sun Technology GL24110P02 PCI
		LinkSys WDT11 PCI (a rebadged GL24110P02)
		Netgear MA301 PCI
		US Robotics 2415 PCI (rebadged WL11000P)
	Gigabit Ethernet Adapters
		Alteon Tigon I/II PCI Gigabit Ethernet boards, including: [A]
		  [B] [C]
		    3Com 3c985 and 3c985B
		    Alteon ACEnic V (fiber and copper)
		    Digital EtherWORKS 1000SX
		    Farallon PN9000SX
		    Netgear GA620 and GA620T
		    SGI Tigon
		Intel i82540, i82542, i82543, i82544, i82545, and i82546
	       	based adapters, including: [A] [B] [C]
		    Intel PRO/1000 Gigabit Server Adapter (SX Fiber)
		      (PWLA8490)
		    Intel PRO/1000F Gigabit Server Adapter (SX Fiber)
		      (PWLA8490SX)
		    Intel PRO/1000T Server Adapter (PWLA8490T)
		    Intel PRO/1000XT Server Adapter (PWLA8490XT)
		    Intel PRO/1000XS Server Adapter (SX Fiber) (PWLA8490XF)
		    Intel PRO/1000T Desktop Adapter (PWLA8390T)
		    Intel PRO/1000XTL Lo Profile PCI Server (PWLA8490XTL)
		    Intel PRO/1000MT Desktop Adapter (PWLA8390MT)
		    Intel PRO/1000MT Server Adapter (PWLA8490MT)
		    Intel PRO/1000MT Dual Port Server Adapter (PWLA8492MT)
		    Intel PRO/1000MF Server Adapter (SX Fiber) (PWLA8490MF)
		    Intel PRO/1000MF Dual Port Server Adapter (SX Fiber)
		      (PWLA8492MF)
		    Intel PRO/1000MF Server Adapter (LX Fiber) (PWLA8490LX)
		National Semiconductor DP83280 and DP83281 based PCI
		adapters, including: [A] [B] [C]
		    Addtron AEG320T
		    Asante FriendlyNet GigaNIX 1000TA and 1000TPC
		    D-Link DGE-500T
		    LinkSys EG1032 and EG1064
		    Netgear GA622T
		    SMC EZ Card 1000
		    Surecom Technology EP-320G-TX
		Level1 LXT1001 based adapters (untested), including: [*]
		    SMC TigerCard 1000
		    D-Link DGE-500SX
		Broadcom BCM570x (Tigon3) based PCI adapters, including: [A]
		  [B] [C]
		    3Com 3c996-T (10/100/1000baseTX)
		    3Com 3c996-SX (1000baseSX)
		    3Com 3c996B-T (10/100/1000baseTX)
		    Dell PowerEdge 2550 integrated BCM5700 NIC
		      (10/100/1000baseTX)
		    SysKonnect SK-9D21 (10/100/1000baseTX)
		    SysKonnect SK-9D41 (1000baseSX)
		Sundance/Tamarack TC9021 based PCI adapters, including: [G]
		    D-Link DGE-550T (10/100/1000baseTX)
		    Antares Microsystems Gigabit Ethernet board
		SysKonnect SK-9841/9842/9843/9844 Gigabit Ethernet
		  adapters [A] [B] [C]
	ATM Adapters
		Efficient Networks EN-155 and Adaptec ANA-590X ATM
		interfaces [*]
	FDDI Adapters
		Digital DEFEA EISA and PCI FDDI adapters [G]
	Wan Adapters
		Lan Media Corporation SSI (T1)/HSSI/DS1/DS3 WAN
		interfaces [G]
	Cryptography Accelerators
		Broadcom Bluesteelnet uBsec 5501, 5601, 5801, 5802, 5805,
		  5820, 5821, 5822 [G]
		Hifn 7751-based boards, including: [G]
		    Soekris Engineering vpn1201 and vpn1211
		    GTGI PowerCrypt Encryption Accelerator
		    NetSec 7751
		    Hifn reference board
		    Invertex AEON
	PC Cards (PCMCIA [B] and Carbus [B] [C])
		ATA cards, including:
		    ATA/IDE card drives
		    ATA/IDE CD-ROM adapters
		    CF/ATA flash cards and disk drives
		Ethernet adapters, including:
		    3Com EtherLink and EtherLink XL-based LAN PC
		    cards, including:
			3Com 3c556, 3c562
			3Com 3c574TX, 3c[CX]FE574BT
			3Com 3c589, 3c589[BCDE]
			3Com 3c575TX, 3c[CX]FE575[BC]T CardBus
			3Com 3c[CX]FEM656, 3c[CX]FEM656[BC] CardBus
		    Intel/DEC 21443 "Tulip" clones, including:
			ADMtex AN985 Centaur-C CardBus
			IBM EtherJet 10/100 CardBus
			SMC EZ CardBus 10/100
			Xircom X3201 CardBus adapters, including
			  RealPort models
		    Intel i8255x-based, including:
			Intel PRO/100 CardBus II
		    NE2000-based, including:
			Accton EN2216
			AmbiCom AMB8002T
			D-Link DE-650, DE-660
			Genius ME 3000II SE
			Hawking PN650TX
			IC-Card
			Kingston KNE-PC2
			Linksys PCMPC100, EC2T Combo
			NDC Instant-Link
			Netgear FA410TX
			Network Everywhere NP10T
			New Media LiveWire 10/100
		    RealTek 81[23]9-based, including:
			Accton MPX5030 CardBus
			Corega FEther CB-TXD 10/100 Ethernet
		    SMC 91Cxx-based, including:
			Megahertz XJEM1144, CC10BT
			SMC EtherEZ 8020BT
		    Xircom, including:
			Xircom CreditCard CE2
		PCMCIA controllers, including:
		    Intel i82365 and compatibles
		SCSI host adapters, including:
		    Adaptec SlimSCSI APA-14[56]0
		Serial ports, including:
		    Most modems, digital cellular modems, and serial
		    cards should work
		Wireless Ethernet adapters:
		    See above
	Universal Serial Bus (USB) Devices [A] [B] [C]
		USB Audio [G]
		USB Diamond Multimedia Rio MP3 players [G]
		USB Ethernet adapters, see above [G]
		USB Generic Human Interface Devices (catch-all) [G]
		USB Handspring Visor [G]
		USB Hubs
		USB Keyboards
		USB Mass Storage devices, i.e., USB floppy drives and
		  USB memory stick controllers
		USB Mice [G]
		USB Modems [G]
		USB Printers [G]
		USB Scanners [G]
		USB-USB cables [G]
		USB Y@p phone [*]
	Pointing Devices [G]
		"Logitech"-style bus mice
		"Microsoft"-style bus mice
		"PS/2"-style mice
		Serial mice (uses serial port driver)
	Sound Devices [G]
		C-Media CMI8[37]38
		Cirrus Logic CrystalClear CS4280, CS4281
		Ensoniq AudioPCI
		ESS Tech ES188[78], ES888
		ESS Solo-1 PCI AudioDrive
		ESS Maestro 1, 2 and 2E and clones
		ESS Maestro 3 and Allegro 1
		Forte Media FM801 audio
		Gravis Ultrasound and Ultrasound Max
		Intel i810/i820 and 440MX AC'97
		NeoMagic 256AV/ZX
		SoundBlaster ISA cards and 100% compatibles
		SoundBlaster PCI128
		SoundBlaster Live! and PCI512 (EMU10k1)
		Trident 4DWAVE-DX/NX and clones (SiS 7018, ALi M5451)
		VIA VT82C686A SouthBridge integrated AC'97 audio
		Yamaha OPL3-SA3
		Yamaha DS-XG
		[The following drivers are not extensively tested:]
		Personal Sound System
		ProAudio Spectrum
		S3 SonicVibes
		Windows Sound System
	Radio Receiver Devices
		AIMS Lab Radiotrack FM radio
		AIMS Lab Radiotrack II FM radio
		Aztech/PackardBell FM radio
		Brooktree 848/849/878/879-based TV tuner
		D-Link DSB-R100 USB radio
		Forte Media FM801 audio
		SoundForte RadioLink SF16-FMR FM radio
		SoundForte RadioLink SF16-FMR2 FM radio
	Miscellaneous Devices
		APM power management,
		Brooktree 8[47][89] based frame grabber and TV tuner cards,
		including: [G]
		    Hauppage Wincast TV
		    STB TV PCI Television Tuner
		    Miro PC TV
		    Intel Smart Video Recorder III
		    IMS TV Turbo
		    AVer Media TV/FM
	Many kinds of ISA Plug-and-Play cards
		Nearly all SB-style audio cards
		Nearly all joystick ports
		Nearly all Yamaha-style audio cards
		Many NE2000-style Ethernet cards
		Most serial port or modem cards
		NE2100 Ethernet cards

Drivers for hardware marked with [G] are only included in the GENERIC
kernels, but are NOT included on the various distribution floppies
(including the cd-rom boot image).
Drivers for hardware marked with [A] are not included in floppy A.
Drivers for hardware marked with [B] are not included in floppy B.
Drivers for hardware marked with [C] are not included in floppy C.
Support for devices marked with [*] is not included in the GENERIC kernel,
and will require you to compile a custom kernel to enable it.


Hardware the we do NOT currently support, but get many questions
about:
	The "Micro Channel" MCA bus used in many IBM PS/2 models
	NCR 5380-based and 53400-based SCSI host adapters
	QIC-40 and QIC-80 tape drives (these are the tape drives
		that connect to the floppy disk controller)
	Multiprocessor motherboards (though they will run fine using
		one processor only)
	Sony and Panasonic proprietary CD-ROM interfaces
	Parallel-port ZIP drives (SCSI and ATAPI ZIP drives work fine)
	Intel i82556 (EtherExpress PRO/100A) and i82596 (EtherExpress
		PRO/10 PCI) Ethernet adapters
	Hewlett-Packard PC-LAN+ (HP27xxx) Ethernet adapters
	Aureal Vortex sound cards
	Winmodems
	Infrared devices, such as commonly found on laptops
	Firewire
	Mylex and Intel RAID controllers
	PCMCIA:
		Memory cards
		Most multifunction cards

We are planning future support for many of these devices.

To be detected by the distributed kernels, some devices must
be configured with specific settings.  Here's their list:

Device		Name	Port	IRQ	DRQ	Misc
------		----	----	---	---	----
Serial ports	pccom0	0x3f8	4		[8250/16450/16550/clones]
		pccom1	0x2f8	3		[8250/16450/16550/clones]
		pccom2	0x3e8	5		[8250/16450/16550/clones]
		ast0	0x1a0	5		[AST 4-port serial card]
		cy0		12		iomem 0xd4000 [Cyclom
						serial card]

Parallel ports	lpt0	0x378	7		[interrupt-driven or polling]
		lpt1	0x278			[polling only]
		lpt2	0x3bc			[polling only]

MFM/ESDI/IDE/RLL hard disk controllers
		wdc0	0x1f0	14		[supports two disks or atapi]
		wdc1	0x170	15		[supports two disks or atapi]

Floppy controller
		fdc0	0x3f0	6	2	[supports two disks]

AHA-154x, AHA-174x (in compatibility mode), or BT-54x SCSI host adapters
		aha0	0x330	any	any
		aha1	0x334	any	any

BT445, BT74x, or BT9xx SCSI host adapters
		bha0	0x330	any	any
		bha1	0x334	any	any

Ultrastor 14f, 24f (if it works), or 34f SCSI host adapters
		uha0	0x330	any	any
		uha1	0x334	any	any

AHA-152x, AIC-6260- or AIC-6360-based SCSI host adapters
		aic0	0x340	11	any

Seagate ST0[12], Future Domain TMC-8xx based SCSI controllers
		sea0		5		iomem 0xc8000

WD7000 and TMC-7000 SCSI host adapters
		wds0	0x350	15	6
		wds1	0x358	11	5

SCSI disks	sd0	first SCSI disk (by SCSI id)
		sd1	second SCSI disk (by SCSI id)
		sd2	third SCSI disk (by SCSI id)
		sd3	fourth SCSI disk (by SCSI id)

SCSI tapes	st0	first SCSI tape (by SCSI id)
		st1	second SCSI tape (by SCSI id)

SCSI CD-ROMs	cd0	first SCSI CD-ROM (by SCSI id)
		cd1	second SCSI CD-ROM (by SCSI id)

SMC/WD 8003, 8013, Elite16, and Elite16 Ultra Ethernet boards
		we0	0x280	9		iomem 0xd0000
		we1	0x300	10		iomem 0xcc000

Novell NE1000, or NE2000 Ethernet boards
		ne0	0x240	9		iomem 0xd8000
		ne1	0x300	10
		ne2	0x280	9

3COM 3c501 Ethernet boards
		el0	0x300	9

3COM 3c503 Ethernet boards
		ec0	0x250	9		iomem 0xd8000

3COM 3c505/Etherlink+ Ethernet boards
		eg0	0x310	5

AT&T StarLAN 10, EN100, or StarLAN Fiber, or 3COM 3c507 Ethernet boards
		ie0	0x360	7		iomem 0xd0000

EtherExpress boards
		ie1	0x300	10

IsoLan, NE2100, and DEPCA
		le0	0x360	15	6

Intel EtherExpress PRO/10
		ex0	0x320	5

PCI ethernet boards need to have an interrupt, either assigned in your
PCI BIOS, or autoconfigured.

Hardware not listed in the above table doesn't need any specific
configuration.


Special care for SMC Elite Ultra:

	The Elite Ultra is very sensitive to how its I/O port is treated.
	Mistreating it can cause a number of effects -- everything from
	the card not responding when the kernel probes, or the soft
	configuration being corrupted or wiped completely.

	By default, the kernel ships with device we1 configured for the
	'default' Elite Ultra locations, comprising of port 0x300, irq 10,
	and memory location 0xcc000.  This matches a hard coded jumper on
	the board as well a common soft config setting.

	Unfortunately, the kernel's autoconfiguration process (specifically,
	some of the devices it probes for) cause conflicts with the SMC
	Elite Ultra, and very often cause it to lose its configuration and
	fail its own probe.  If this happens, you must boot the computer
	into DOS, and run the EzSetup program from SMC (if you do not have
	a copy on the floppy accompanying your board, you can download it
	from ftp://ftp.darmstadt.gmd.de/pub/pc/hardware/nic/smc/gez122.exe -
	it is not available from SMC anymore).  This program will allow you
	to reconfigure and recover a card that has lost its configuration
	with a minimum of hassle.

	In order to avoid blowing away the card, one *must* use the
	run-time kernel configuration system when booting the Install
	kernel.  This is done by giving the -c flag to the initial boot
	request.  Following the loading of the kernel, the user is
	presented with a

	UKC>

	prompt.  At this prompt, a variety of commands may be issued, but
	the relevant one to getting the SMC Elite Ultra running is
	'disable'.  The wt0, el0, and ie1 devices all need to be disabled.
	This is done by typing 'disable' followed by the name of the
	device, i.e., 'disable wt0', and pressing return.

	If, for some reason, your Elite Ultra is not configured at the
	'default' location the kernel is expecting it, you may also use
	the 'change' command in the UKC system to modify where the kernel
	will look for it.  Typing 'change we1' will allow you to modify
	those settings.  Note that running the card at an i/o port of
	anything other then 0x300 at this point is not recommended, and is
	beyond the scope of this document-- by doing so you risk other
	device probes wreaking the havoc we are trying to avoid.

	When all three extra devices are disabled and any changes made,
	the 'quit' command will exit the UKC.  The kernel should then
	boot, and find your Elite Ultra on device we1.


Special care for PCI BIOS:

	As all BIOS implementations and subsystems this one has bugs too.
	Sometimes specifications are unclear about interfaces and/or data
	validation.
	These all cause our driver for PCI BIOS to misbehave in more or
	less fatal ways, such as panics on pcibios0 configuration or pci
	device attachments, or unconfigured pci devices due to irq and/or
	I/O address misconfiguration.

	Fast workaround

	Boot by giving the -c flag to the initial boot request.
	Following the loading of the kernel, the user is presented with a

	UKC>

	Then type the following commands:

	UKC> change bios0
	165 bios0 at mainbus0 bus -1 flags 0x0
	change [n] y
	bus [-1] ? <enter>
	flags [0] ? 3
	165 bios0 changed
	165 bios0 at mainbus0 bus -1 flags 0x3
	UKC> quit

	This will disable the pcibios0 attachment.
	Sometimes, especially when hangs occur on particular pci device
	attachments, moving pci cards into a different slot helps.

	Fixing for good

	Try to gather dmesg output from the failing configuration, for
	example by using serial console (see boot(8)) and send it to
	<mickey@openbsd.org> along with descriptions of your hardware setup.
	Alternatively, dig in the code and fix problems.