1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
|
dnl $OpenBSD: install,v 1.14 2014/03/19 01:59:48 tedu Exp $
OpenBSDInstallPrelude
Booting the installation media:
The easiest way to boot into the OpenBSD installer is to copy the miniroot
image to a USB stick using dd(1) and boot bsd.rd from the PMON prompt:
PMON> boot -k /dev/fs/ext2@usb0/bsd.rd
on Lemote systems, and
PMON> load /dev/fs/ext2@usb0/bsd.rd
PMON> g
on Gdium systems.
Another way to boot into the OpenBSD installer is to copy the bsd.rd
installation kernel to the main Linux partition, and boot from it.
Assuming the installation kernel has been copied to /boot/bsd.rd on the
Linux system, at the PMON prompt, enter
PMON> boot -k /dev/fs/ext2@wd0/boot/bsd.rd
on Lemote systems, and
PMON> load /dev/fs/ext2@usbg0/boot/bsd.rd
PMON> g
on Gdium systems.
dnl
dnl Alternatively, if your particular PMON flavour supports `fat' filesystems,
dnl you can boot the kernel from an usb key with:
dnl
dnl PMON> boot /dev/fs/fat@usb0:/bsd.rd
Netbooting the installation kernel can be done as well:
PMON> ifaddr rtl0 <your ip>
PMON> boot -k tftp://<server ip>/bsd.rd
OpenBSDInstallPart2
OpenBSDInstallPart3(,"sd0 for USB storage, or wd0 for internal storage
(either a disk drive or an SSD)")
OpenBSDInstallPart4
OpenBSDInstallMBRPart1
dnl OpenBSDInstallMBRPart2
The fdisk(8) utility will be invoked to let you edit your MBR
partitioning. The current MBR partitions defined will be
displayed and you will be allowed to modify them, and add new
partitions.
The setup will need one 'Linux files' partition and an 'OpenBSD'
partition. If you use the whole disk option, the install script
will create a small 'Linux files' partition and use the rest of
the disk for the OpenBSD installation.
After your OpenBSD MBR partition has been setup, the real
partition setup can follow.
OpenBSDInstallPart5({:-
Linux partitions defined on the disk will usually show up as
partition 'i', 'j' and so on.-:})
OpenBSDInstallPart6({:-CD-ROM, -:})
OpenBSDURLInstall
OpenBSDCDROMInstall
OpenBSDNFSInstall
OpenBSDDISKInstall({:-"wdN" or -:},,{:-, Linux (ext2) or MS-DOS-:})
OpenBSDCommonInstall
OpenBSDInstallWrapup
Lemote systems final steps:
Lemote systems ship with a boot menu. After an installation
preserving the Linux partitions is complete, you can add an OpenBSD
entry to the boot menu to be able to boot OpenBSD more easily.
The boot menu contents are found in /boot/boot.cfg on the Linux
partition. To add an OpenBSD entry, simply add a new entry in the
file, such as:
title OpenBSD
kernel /dev/fs/ext2@wd0/boot/boot
args ""
In the example above, /dev/fs/ext2@wd0/boot/boot is the PMON path
to the OpenBSD bootloader, which is copied to that location by the
install script.
You may make OpenBSD the default option by changing the ``default''
line near the top of the file. The value on this line is the index
of the default entry, starting at zero. So if you added the OpenBSD
entry as the fourth entry in the file, it would become the default
choice with:
default 3
The timeout until the default choice is selected, in seconds, can
be modified on the ``timeout'' line.
However, due to side effects of PMON operation, automatic loading
of OpenBSD binaries (bootloader or kernel) causes a register dump
to be silently displayed by PMON; while it won't be visible on
screen, PMON will gladly wait for user input to continue if it
believes it has written too much output.
To overcome this annoyance, simply change the `moresz' environment
variable to a large value (30 or larger will do):
PMON> set moresz 30
The bootloader will attempt to load the kernel file set in the `bsd'
environment variable. Should this fail, it will wait for user
commands. The value of `bsd' should be a path within the OpenBSD
root filesystem on the disk, such as:
PMON> set bsd /bsd
If you have removed the Linux installation or if you do not want to
use the boot menu, you may simply disable it in the environment, and
set the `al' variable to point to the bootloader path:
PMON> set ShowBootMenu no
PMON> set al /dev/fs/ext2@wd0/boot/boot
Alternatively, you might want to create a /boot/boot.cfg file in the
small Linux partition created by the installation.
On the Fuloong 2F, getting PMON to use the serial console is tricky,
due to PMON bugs and design decisions made by Lemote. PMON's default
serial speed is 115200, and OpenBSD will also use that speed. By
default, it is only possible to use serial input if no USB keyboard is
attached. PMON will nevertheless display its output on the VGA display.
To get full serial access, the first step is to boot into PMON> with
both serial console and VGA display but no USB keyboard attached.
You can type on the serial console, but output will be shown on the
VGA display. Next enter the following commands:
PMON> set novga 1
PMON> set nokbd 1
PMON> set al ""
PMON> set ShowBootMenu no
If you have a dual boot setup, mount the Linux boot partition and
rename /boot/boot.cfg so that it does not get found by PMON. This
will enable full serial access to PMON on the Fuloong 2F.
Gdium systems final steps:
Gdium systems do not have a boot menu, and directly boot the system
(Linux, by default). Unfortunately, the OpenBSD bootloader operation
is very limited on this machine, as it can not access USB devices
(which means no keyboard input as well).
To overcome this and be able to boot OpenBSD nevertheless, the
bootloader relies upon PMON's ability to load a Linux so-called
``initrd'' image. By making PMON load the kernel as the ``initrd''i
image, and then run the bootloader, the bootloader will be able to
``load'' the OpenBSD kernel correctly.
The path to the file booted by default is set in the `al' environment
variable, and the path to the initrd image is set in the `rd'
environment variable.
To boot the bsd kernel on the G-Key by default, assuming it has been
copied to /boot/bsd on the first ext3 partition, and the bootloader
has been copied to /boot/boot on the same filesystem, the settings
are:
PMON> set al /dev/fs/ext2@usbg0/boot/boot
PMON> set rd /dev/fs/ext2@usbg0/boot/bsd
Alternatively, you can disable autoboot by removing this variable:
PMON> unset al
OpenBSDCongratulations
OpenBSDUnattendedInstallation
|
