1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
dnl $OpenBSD: prep,v 1.15 2009/10/10 19:20:29 miod Exp $
Before you install your system, you should identify your system family and
familiarize yourself with the ARCBios setup and how to run programs from
the Command monitor prompt.
Identifying your system:
Due to significant design differences in SGI systems, OpenBSD
needs to use different kernels, depending on the system family.
There are currently four system families supported by OpenBSD:
IP27 family:
Origin 200, Onyx 2
Origin 2000
IP30 family:
Octane, Octane 2
IP32 family:
O2, O2+
IP35 family:
Origin 300, Origin 3000, Onyx 300
Origin 350, Onyx 350, Onyx 4
Fuel
Tezro
You should use the kernels (bsd and bsd.rd) with the IP suffix
matching your family number, except for IP35 systems which use
IP27 kernels.
Accessing the Maintenance Console:
When the system starts up, press the ESC key or use the mouse and
click the ``stop for maintenance'' button. Once in the System
Maintenance Menu, select '5' (or click the appropriate icon if you
are using the graphics console) to go into the Command Monitor.
If the internal disk with the lowest SCSI ID does not contain a
valid Volume Header, but is bootable, the Maintenance Console will
be entered by default.
The first time the Maintenance Console is entered, it may be
necessary to force a reset of the environment to its default
settings by entering the ``resetenv'' command at the chevron
prompt. If some variables have been set explicitly, this may
disturb the normal OpenBSD boot process.
Switching from serial to graphics console and vice versa:
To change to serial console, go into the ARCBios Maintenance Console
and change the ``console'' environment variable, and power-cycle
the machine.
>> setenv console d
will select 9600 8N1, no flow control, serial console on the first
serial port (labeled ``(1)''), while
>> setenv console g
will select the graphics console.
Only IP32 family systems are supported with a graphis console
under OpenBSD at the moment. On all other non-headless systems,
you need to change the console to serial.
Switching from L1 console to serial console and vice versa:
IP35 systems without a graphics console can have the PROM console output
either on the L1 console serial port, or the regular serial port.
The `console' command at the PROM prompt, can select between them:
>> console sc
will switch to the L1 serial port, while
>> console ioc3
or
>> console ioc4
will select the regular serial port, depending on the I/O board type.
On Fuel systems, there is no external L1 serial port, so `console sc'
should never be used on these machines.
Origin 300 and 3000 families can switch between `sc' and `ioc3', while
Origin 350 and 3500 families can switch between `sc' and `ioc4'.
The OpenBSD kernel only supports serial console on the regular serial
ports; if your PROM console is on the L1 port, the kernel console will
nevertheless pick the first IOC3 or IOC4 serial port.
Setting the environment:
When setting up the system to boot from disk, the ``OSLoader''
environment variable will need to be changed.
Its default value is ``sash'', which is IRIX' standalone
shell and loader. Set it to ``boot'', the OpenBSD boot loader.
Also, by default it tries to boot a kernel named ``/unix''. To
make it boot OpenBSD, set ``OSLoadFilename'' to ``/bsd''.
To enable automatic booting of OpenBSD once the machine has passed its
diagnostic tests, change the value of ``AutoLoad'' to ``Yes''.
|
