path: root/distrib/pmax/install.md

#	$OpenBSD: install.md,v 1.10 1998/11/03 04:10:16 aaron Exp $
#	$NetBSD: install.md,v 1.3.2.5 1996/08/26 15:45:28 gwr Exp $
#
#
# Copyright (c) 1996 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Jason R. Thorpe.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#        This product includes software developed by the NetBSD
#        Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

#
# machine dependent section of installation/upgrade script.
#

TMPWRITEABLE=/tmp/writeable
KERNFSMOUNTED=/tmp/kernfsmounted

# Machine-dependent install sets
MDSETS=""
# TTT MDSETS="xbin xman xinc xcon"

md_set_term() {
	if [ ! -z "$TERM" ]; then
		return
	fi
	echo -n "Specify terminal type [vt100]: "
	getresp "vt100"
	TERM="$resp"
	export TERM
}

md_makerootwritable() {
	# Was: do_mfs_mount "/tmp" "2048"
	# /tmp is the mount point
	# 2048 is the size in DEV_BIZE blocks

# TTT	umount /tmp > /dev/null 2>&1
#	if ! mount_mfs -s 2048 swap /tmp ; then
#		cat << \__mfs_failed_1
#
#FATAL ERROR: Can't mount the memory filesystem.
#
#__mfs_failed_1
#		exit
#	fi

	# Bleh.  Give mount_mfs a chance to DTRT.
#	sleep 2
	
	md_mountkernfs
}

md_mountkernfs() {
	if [ -e ${KERNFSMOUNTED} ]
	then
		return
	fi
	if [ ! -d /kern ]; then
		mkdir /kern
	fi
# TTT use the chance to also make the /mnt2 directory - should be there
	if [ ! -d /mnt2 ]; then
		mkdir /mnt2
	fi
	if ! mount -t kernfs /kern /kern
	then
		cat << \__kernfs_failed_1
FATAL ERROR: Can't mount kernfs filesystem
__kernfs_failed_1
		exit
	fi
	> ${KERNFSMOUNTED} 
}

md_machine_arch() {
	cat /kern/machine
}

md_get_diskdevs() {
	# return available disk devices
	grep "^rz[0-6] " < /kern/msgbuf | cut -d" " -f1 | sort -u
}

md_get_cddevs() {
	# return available CDROM devices
	grep "^rz[0-6] " < /kern/msgbuf | cut -d" " -f1 | sort -u
}

md_get_partition_range() {
    # return range of valid partition letters
    echo "[a-p]"
}


md_installboot() {
	# $1 is the root disk

	echo -n "Installing boot block... "
	disklabel -W ${1}
	disklabel -B ${1}
	echo "done."

	# we also use this chance to do an ldconfig here
	echo -n "creating runtime link editor directory cache..."
	chroot /mnt ldconfig
	echo "done."
}

md_native_fstype() {
}

md_native_fsopts() {
}

md_checkfordisklabel() {
	# $1 is the disk to check
	local rval

	disklabel -r $1 > /dev/null 2> /tmp/checkfordisklabel
	if grep "no disk label" /tmp/checkfordisklabel; then
		rval=1
	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
		rval=2
	else
		rval=0
	fi

	rm -f /tmp/checkfordisklabel
	return $rval
}

md_prep_disklabel()
{
	local _disk

	_disk=$1
	md_checkfordisklabel $_disk
	case $? in
	0)
		echo -n "Do you wish to edit the disklabel on $_disk? [y]"
		;;
	1)
		echo "WARNING: Disk $_disk has no label"
		echo -n "Do you want to create one with the disklabel editor? [y]"
		;;
	2)
		echo "WARNING: Label on disk $_disk is corrupted"
		echo -n "Do you want to try and repair the damage using the disklabel editor? [y]"
		;;
	esac

	getresp "y"
	case "$resp" in
	y*|Y*) ;;
	*)	return ;;
	esac

	# display example
	cat << \__md_prep_disklabel_1

If you are unsure of how to use multiple partitions properly
(ie. separating /, /usr, /tmp, /var, /usr/local, and other things)
just split the space into a root and swap partition for now.
__md_prep_disklabel_1

	disklabel -W ${_disk}
	disklabel -E ${_disk}
}

md_copy_kernel() {
	echo -n "Copying kernel..."
	cp -p /bsd /mnt/bsd
	echo "done."
}

md_welcome_banner() {
{
	if [ "$MODE" = "install" ]; then
		echo ""
		echo "Welcome to the OpenBSD/pmax ${VERSION} installation program."
		cat << \__welcome_banner_1

This program is designed to help you put OpenBSD on your disk in a simple and
rational way.
__welcome_banner_1

	else
		echo "Welcome to the OpenBSD/pmax ${VERSION} upgrade program."
		cat << \__welcome_banner_2

This program is designed to help you upgrade your OpenBSD system in a
simple and rational way.

As a reminder, installing the `etc' binary set is NOT recommended.
Once the rest of your system has been upgraded, you should manually
merge any changes to files in the `etc' set into those files which
already exist on your system.
__welcome_banner_2
	fi

cat << \__welcome_banner_3

As with anything which modifies your disk's contents, this program can
cause SIGNIFICANT data loss, and you are advised to make sure your
data is backed up before beginning the installation process.

Default answers are displayed in brackets after the questions.  You
can hit Control-C at any time to quit, but if you do so at a prompt,
you may have to hit return.  Also, quitting in the middle of
installation may leave your system in an inconsistent state.
__welcome_banner_3
} | more
}

md_not_going_to_install() {
	cat << \__not_going_to_install_1
OK, then.  Enter `halt' at the prompt to halt the machine.  Once the
machine has halted, power-cycle the system to load new boot code.
__not_going_to_install_1
}

md_congrats() {
	local what;
	if [ "$MODE" = "install" ]; then
		what="installed";
	else
		what="upgraded";
	fi
	cat << __congratulations_1
CONGRATULATIONS!  You have successfully $what OpenBSD!  To boot the
installed system, enter halt at the command prompt. Once the system
has halted, reset the machine and boot from the disk.
__congratulations_1
}