blob: ceeb225abc79b6a19e8d00a00985ade968e2b1d6 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
|
# $OpenBSD: sysctl.conf,v 1.55 2014/04/19 16:49:13 henning Exp $
#
# This file contains a list of sysctl options the user wants set at
# boot time. See sysctl(3) and sysctl(8) for more information on
# the many available variables.
#
#net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of IPv4 packets
#net.inet.ip.mforwarding=1 # 1=Permit forwarding (routing) of IPv4 multicast packets
#net.inet.ip.multipath=1 # 1=Enable IP multipath routing
#net.inet.icmp.rediraccept=1 # 1=Accept ICMP redirects
#net.inet6.icmp6.rediraccept=1 # 1=Accept IPv6 ICMP redirects (for hosts)
#net.inet6.ip6.forwarding=1 # 1=Permit forwarding (routing) of IPv6 packets
#net.inet6.ip6.mforwarding=1 # 1=Permit forwarding (routing) of IPv6 multicast packets
#net.inet6.ip6.multipath=1 # 1=Enable IPv6 multipath routing
#net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must be 0)
#net.inet.tcp.always_keepalive=1 # 1=Keepalives for all connections (e.g. hotel/airport NAT)
#net.inet.tcp.keepidle=100 # 100=send TCP keepalives every 50 seconds
#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol
#net.inet.ah.enable=0 # 0=Disable the AH IPsec protocol
#net.inet.esp.udpencap=0 # 0=Disable ESP-in-UDP encapsulation
#net.inet.ipcomp.enable=1 # 1=Enable the IPCOMP protocol
#net.inet.etherip.allow=1 # 1=Enable the Ethernet-over-IP protocol
#net.inet.tcp.ecn=1 # 1=Enable the TCP ECN extension
#net.inet.carp.preempt=1 # 1=Enable carp(4) preemption
#net.inet.carp.log=3 # log level of carp(4) info, default 2
#net.pipex.enable=1 # 1=Enable pipex(4) for npppd(8)
#ddb.panic=0 # 0=Do not drop into ddb on a kernel panic
#ddb.console=1 # 1=Permit entry of ddb from the console
#fs.posix.setuid=0 # 0=Traditional BSD chown() semantics
#vm.swapencrypt.enable=0 # 0=Do not encrypt pages that go to swap
#vfs.nfs.iothreads=4 # Number of nfsio kernel threads
#net.inet.ip.mtudisc=0 # 0=Disable tcp mtu discovery
#kern.usercrypto=1 # 1=Enable userland use of /dev/crypto
#kern.userasymcrypto=1 # 1=Permit userland to do asymmetric crypto
#kern.splassert=2 # 2=Enable with verbose error messages
#kern.nosuidcoredump=2 # 2=Put suid coredumps in /var/crash
#kern.watchdog.period=32 # >0=Enable hardware watchdog(4) timer if available
#kern.watchdog.auto=0 # 0=Disable automatic watchdog(4) retriggering
#kern.pool_debug=0 # 0=Disable pool corruption checks (faster)
#hw.allowpowerdown=0 # 0=Disable power button shutdown
|
