path: root/lib/libc/sys/ptrace.2

.\"	$OpenBSD: ptrace.2,v 1.26 2008/09/16 19:41:06 kettenis Exp $
.\"	$NetBSD: ptrace.2,v 1.3 1996/02/23 01:39:41 jtc Exp $
.\"
.\" This file is in the public domain.
.Dd $Mdocdate: September 16 2008 $
.Dt PTRACE 2
.Os
.Sh NAME
.Nm ptrace
.Nd process tracing and debugging
.Sh SYNOPSIS
.Fd #include <sys/types.h>
.Fd #include <sys/ptrace.h>
.Ft int
.Fn ptrace "int request" "pid_t pid" "caddr_t addr" "int data"
.Sh DESCRIPTION
.Fn ptrace
provides tracing and debugging facilities.
It allows one process (the
.Em tracing
process) to control another (the
.Em traced
process).
Most of the time, the traced process runs normally, but when
it receives a signal
.Po
see
.Xr sigaction 2
.Pc ,
it stops.
The tracing process is expected to notice this via
.Xr wait 2
or the delivery of a
.Dv SIGCHLD
signal, examine the state of the stopped process, and cause it to
terminate or continue as appropriate.
.Fn ptrace
is the mechanism by which all this happens.
.Fn ptrace
is only available on kernels compiled with the
.Cm PTRACE
option.
.Pp
The
.Fa request
argument specifies what operation is being performed; the meaning of
the rest of the arguments depends on the operation, but except for one
special case noted below, all
.Fn ptrace
calls are made by the tracing process, and the
.Fa pid
argument specifies the process ID of the traced process.
.Fa request
can be:
.Bl -tag -width 12n
.It Dv PT_TRACE_ME
This request is the only one used by the traced process; it declares
that the process expects to be traced by its parent.
All the other arguments are ignored.
(If the parent process does not expect to trace the child, it will
probably be rather confused by the results; once the traced process stops,
it cannot be made to continue except via
.Eo \&
.Fn ptrace
.Ec \&.)
When a process has used this request and calls
.Xr execve 2
or any of the routines built on it
.Po
such as
.Xr execv 3
.Pc ,
it will stop before executing the first instruction of the new image.
Also, any setuid or setgid bits on the executable being executed will
be ignored.
.It Dv PT_READ_I , Dv PT_READ_D
These requests read a single
.Li int
of data from the traced process' address space.
Traditionally,
.Fn ptrace
has allowed for machines with distinct address spaces for instruction
and data, which is why there are two requests: conceptually,
.Dv PT_READ_I
reads from the instruction space and
.Dv PT_READ_D
reads from the data space.
In the current
.Ox
implementation, these
two requests are completely identical.
The
.Fa addr
argument specifies the address (in the traced process' virtual address
space) at which the read is to be done.
This address does not have to meet any alignment constraints.
The value read is returned as the return value from
.Eo \&
.Fn ptrace
.Ec .
.It Dv PT_WRITE_I , Dv PT_WRITE_D
These requests parallel
.Dv PT_READ_I
and
.Dv PT_READ_D ,
except that they write rather than read.
The
.Fa data
argument supplies the value to be written.
.\" .It Dv PT_READ_U
.\" This request reads an
.\" .Li int
.\" from the traced process' user structure.  The
.\" .Fa addr
.\" argument specifies the location of the int relative to the base of the
.\" user structure; it will usually be an integer value cast to
.\" .Li caddr_t
.\" either explicitly or via the presence of a prototype for
.\" .Eo \&
.\" .Fn ptrace
.\" .Ec .
.\" Unlike
.\" .Dv PT_READ_I
.\" and
.\" .Dv PT_READ_D ,
.\" .Fa addr
.\" must be aligned on an
.\" .Li int
.\" boundary.  The value read is returned as the return value from
.\" .Eo \&
.\" .Fn ptrace
.\" .Ec .
.\" .It Dv PT_WRITE_U
.\" This request writes an
.\" .Li int
.\" into the traced process' user structure.
.\" .Fa addr
.\" specifies the offset, just as for
.\" .Dv PT_READ_U ,
.\" and
.\" .Fa data
.\" specifies the value to be written, just as for
.\" .Dv PT_WRITE_I
.\" and
.\" .Dv PT_WRITE_D .
.It Dv PT_CONTINUE
The traced process continues execution.
.Fa addr
is an address specifying the place where execution is to be resumed (a
new value for the program counter), or
.Li (caddr_t)1
to indicate that execution is to pick up where it left off.
.Fa data
provides a signal number to be delivered to the traced process as it
resumes execution, or 0 if no signal is to be sent.
.It Dv PT_KILL
The traced process terminates, as if
.Dv PT_CONTINUE
had been used with
.Dv SIGKILL
given as the signal to be delivered.
.It Dv PT_ATTACH
This request allows a process to gain control of an otherwise unrelated
process and begin tracing it.
It does not need any cooperation from the to-be-traced process.
In this case,
.Fa pid
specifies the process ID of the to-be-traced process, and the other two
arguments are ignored.
This request requires that the target process must have the same real UID
as the tracing process, and that it must not be executing a set-user-ID
or set-group-ID executable.
(If the tracing process is running as root, these restrictions do not apply.)
The tracing process will see the newly traced process stop and may then
control it as if it had been traced all along.
.It Dv PT_DETACH
This request is like
.Dv PT_CONTINUE ,
except that it does not allow
specifying an alternate place to continue execution, and after it
succeeds, the traced process is no longer traced and continues
execution normally.
.It Dv PT_IO
This request is a more general interface that can be used instead of
.Dv PT_READ_D ,
.Dv PT_WRITE_D ,
.Dv PT_READ_I
and
.Dv PT_WRITE_I .
The I/O request is encoded in a
.Dq Li "struct ptrace_io_desc"
defined as:
.Bd -literal -offset indent
struct ptrace_io_desc {
	int     piod_op;
	void    *piod_offs;
	void    *piod_addr;
	size_t  piod_len;
};
.Ed
.Pp
Where
.Fa piod_offs
is the offset within the traced process where the I/O operation should be
made,
.Fa piod_addr
is the buffer in the parent and
.Fa piod_len
is the length of the I/O request.
The
.Fa piod_op
member specifies what operation needs to be done.
Possible values are:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It PIOD_READ_D
.It PIOD_WRITE_D
.It PIOD_READ_I
.It PIOD_WRITE_I
.It PIOD_READ_AUXV
.El
.Pp
See also the description of
.Dv PT_READ_I
for the difference between D and I spaces.
The
.Dv PIOD_READ_AUXV
operation can be used to read from the ELF auxiliary vector.
A pointer to the descriptor is passed in
.Fa addr .
On return the
.Fa piod_len
field in the descriptor will be updated with the actual number of bytes
transferred.
If the requested I/O couldn't be successfully performed
.Fn ptrace
will return
.Li -1
and set
.Va errno .
.It Dv PT_SET_EVENT_MASK
This request can be used to specify which events in the traced process
should be reported to the tracing process.
These events are specified in a
.Dq Li "struct ptrace_event"
defined as:
.Bd -literal -offset indent
typedef struct ptrace_event {
	int	pe_set_event;
} ptrace_event_t;
.Ed
.Pp
Where
.Fa pe_set_event
is the set of events to be reported.
This set is formed by OR'ing together the following values:
.Bl -tag -width 18n
.It PTRACE_FORK
Report
.Xr fork 2 .
.El
.Pp
A pointer to this structure is passed in
.Fa addr .
The
.Fa data
argument should be set to
.Li sizeof(struct ptrace_event) .
.It Dv PT_GET_EVENT_MASK
This request can be used to determine which events in the traced
process will be reported.
The information is read into the
.Dq Li struct ptrace_event
pointed to by
.Fa addr .
The
.Fa data
argument should be set to
.Li sizeof(struct ptrace_event) .
.It Dv PT_GET_PROCESS_STATE
This request reads the state information associated with the event
that stopped the traced process.
The information is reported in a
.Dq Li "struct ptrace_state"
defined as:
.Bd -literal -offset indent
typedef struct ptrace_state {
	int	pe_report_event;
	pid_t	pe_other_pid;
} ptrace_state_t;
.Ed
.Pp
Where
.Fa pe_report_event
is the event being reported.
If the event being reported is
.Dv PTRACE_FORK ,
.Fa pe_other_pid
will be set to the process ID of the other end of the fork.
A pointer to this structure is passed in
.Fa addr .
The
.Fa data
argument should be set to
.Li sizeof(struct ptrace_state) .
.El
.Pp
Additionally, machine-specific requests can exist.
Depending on the architecture, the following requests may be available
under
.Ox :
.Bl -tag -width 12n
.It Dv PT_GETREGS Pq all platforms
This request reads the traced process' machine registers into the
.Dq Li struct reg
(defined in
.Aq Pa machine/reg.h )
pointed to by
.Fa addr .
.It Dv PT_SETREGS Pq all platforms
This request is the converse of
.Dv PT_GETREGS ;
it loads the traced process' machine registers from the
.Dq Li struct reg
(defined in
.Aq Pa machine/reg.h )
pointed to by
.Fa addr .
.\" .It Dv PT_SYSCALL
.\" This request is like
.\" .Dv PT_CONTINUE
.\" except that the process will stop next time it executes any system
.\" call.  Information about the system call can be examined with
.\" .Dv PT_READ_U
.\" and potentially modified with
.\" .Dv PT_WRITE_U
.\" through the
.\" .Li u_kproc.kp_proc.p_md
.\" element of the user structure (see below).  If the process is continued
.\" with another
.\" .Dv PT_SYSCALL
.\" request, it will stop again on exit from the syscall, at which point
.\" the return values can be examined and potentially changed.  The
.\" .Li u_kproc.kp_proc.p_md
.\" element is of type
.\" .Dq Li struct mdproc ,
.\" which should be declared by including
.\" .Aq Pa sys/param.h ,
.\" .Aq Pa sys/user.h ,
.\" and
.\" .Aq Pa machine/proc.h ,
.\" and contains the following fields (among others):
.\" .Bl -item -compact -offset indent
.\" .It
.\" .Li syscall_num
.\" .It
.\" .Li syscall_nargs
.\" .It
.\" .Li syscall_args[8]
.\" .It
.\" .Li syscall_err
.\" .It
.\" .Li syscall_rv[2]
.\" .El
.\" When a process stops on entry to a syscall,
.\" .Li syscall_num
.\" holds the number of the syscall,
.\" .Li syscall_nargs
.\" holds the number of arguments it expects, and
.\" .Li syscall_args
.\" holds the arguments themselves.  (Only the first
.\" .Li syscall_nargs
.\" elements of
.\" .Li syscall_args
.\" are guaranteed to be useful.)  When a process stops on exit from a
.\" syscall,
.\" .Li syscall_num
.\" is
.\" .Eo \&
.\" .Li -1
.\" .Ec ,
.\" .Li syscall_err
.\" holds the error number
.\" .Po
.\" see
.\" .Xr errno 2
.\" .Pc ,
.\" or 0 if no error occurred, and
.\" .Li syscall_rv
.\" holds the return values.  (If the syscall returns only one value, only
.\" .Li syscall_rv[0]
.\" is useful.)  The tracing process can modify any of these with
.\" .Dv PT_WRITE_U ;
.\" only some modifications are useful.
.\" .Pp
.\" On entry to a syscall,
.\" .Li syscall_num
.\" can be changed, and the syscall actually performed will correspond to
.\" the new number (it is the responsibility of the tracing process to fill
.\" in
.\" .Li syscall_args
.\" appropriately for the new call, but there is no need to modify
.\" .Eo \&
.\" .Li syscall_nargs
.\" .Ec ).
.\" If the new syscall number is 0, no syscall is actually performed;
.\" instead,
.\" .Li syscall_err
.\" and
.\" .Li syscall_rv
.\" are passed back to the traced process directly (and therefore should be
.\" filled in).  If the syscall number is otherwise out of range, a dummy
.\" syscall which simply produces an
.\" .Er ENOSYS
.\" error is effectively performed.
.\" .Pp
.\" On exit from a syscall, only
.\" .Li syscall_err
.\" and
.\" .Li syscall_rv
.\" can usefully be changed; they are set to the values returned by the
.\" syscall and will be passed back to the traced process by the normal
.\" syscall return mechanism.
.It Xo Dv PT_STEP
.No (not available on sparc and sparc64)
.Xc
The traced process continues execution, as in request
.Dv PT_CONTINUE ;
however, execution stops as soon as possible after execution of at least
one instruction
.Pq single-step .
.\" m88k - vax (no general fp registers)
.\" mips64 (fp registers in the main reg structure)
.It Xo Dv PT_GETFPREGS
.No (not available on aviion, luna88k, mvme88k, sgi and vax)
.Xc
This request reads the traced process' floating-point registers into
the
.Dq Li struct fpreg
(defined in
.Aq Pa machine/reg.h )
pointed to by
.Fa addr .
.It Xo Dv PT_SETFPREGS
.No (not available on aviion, luna88k, mvme88k, sgi and vax)
.Xc
This request is the converse of
.Dv PT_GETFPREGS ;
it loads the traced process' floating-point registers from the
.Dq Li struct fpreg
(defined in
.Aq Pa machine/reg.h )
pointed to by
.Fa addr .
.It Dv PT_GETXMMREGS Pq i386 only
This request reads the traced process' XMM registers into the
.Dq Li struct xmmregs
(defined in
.Aq Pa machine/reg.h )
pointed to by
.Fa addr .
.It Dv PT_SETXMMREGS Pq i386 only
This request is the converse of
.Dv PT_GETXMMREGS ;
it loads the traced process' XMM registers from the
.Dq Li struct xmmregs
(defined in
.Aq Pa machine/reg.h )
pointed to by
.Fa addr .
.It Dv PT_WCOOKIE Pq sparc and sparc64 only
This request reads the traced process'
.Sq window cookie
into the
.Li int
pointed to by
.Fa addr .
The window cookie needs to be
.Sq XOR'ed
to stack-saved program counters.
.El
.Sh ERRORS
Some requests can cause
.Fn ptrace
to return
.Li -1
as a non-error value; to disambiguate,
.Va errno
is set to zero and this should be checked.
The possible errors are:
.Bl -tag -width 4n
.It Bq Er ESRCH
No process having the specified process ID exists.
.It Bq Er EINVAL
.Bl -bullet -compact
.It
A process attempted to use
.Dv PT_ATTACH
on itself.
.It
The
.Fa request
was not one of the legal requests.
.\" .It
.\" The
.\" .Fa addr
.\" to
.\" .Dv PT_READ_U
.\" or
.\" .Dv PT_WRITE_U
.\" was not
.\" .Li int Ns \&-aligned.
.It
The signal number (in
.Fa data )
to
.Dv PT_CONTINUE
.\" or
.\" .Dv PT_SYSCALL
was neither 0 nor a legal signal number.
.It
.Dv PT_GETREGS ,
.Dv PT_SETREGS ,
.Dv PT_GETFPREGS ,
or
.Dv PT_SETFPREGS
was attempted on a process with no valid register set.
(This is normally true only of system processes.)
.El
.It Bq Er EBUSY
.Bl -bullet -compact
.It
.Dv PT_ATTACH
was attempted on a process that was already being traced.
.It
A request attempted to manipulate a process that was being traced by
some process other than the one making the request.
.It
A request (other than
.Dv PT_ATTACH )
specified a process that wasn't stopped.
.El
.It Bq Er EPERM
.Bl -bullet -compact
.It
A request (other than
.Dv PT_ATTACH )
attempted to manipulate a process that wasn't being traced at all.
.It
An attempt was made to use
.Dv PT_ATTACH
on a process in violation of the requirements listed under
.Dv PT_ATTACH
above.
.It
An attempt was made to use
.Dv PT_ATTACH
on a system process.
.El
.El
.Sh BUGS
On several RISC architectures (such as aviion, luna88k, mvme88k, sparc
and sparc64),
the PC is set to the provided PC value for
.Dv PT_CONTINUE
and similar calls, and the remainder of the execution pipeline registers
are set to the following instructions, even if the instruction at PC
is a branch instruction.
Using
.Dv PT_GETREGS
and
.Dv PT_SETREGS
to modify the PC, passing
.Li (caddr_t)1
to
.Eo \&
.Fn ptrace
.Ec ,
should be able to sidestep this.
.\" .Pp
.\" When using
.\" .Dv PT_SYSCALL ,
.\" there is no easy way to tell whether the traced process stopped because
.\" it made a syscall or because a signal was sent at a moment that it just
.\" happened to have valid-looking garbage in its
.\" .Dq Li struct mdproc .