path: root/share/doc/psd/21.ipc/4.t

.\" Copyright (c) 1986, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	@(#)4.t	8.1 (Berkeley) 6/8/93
.\"
.\".ds RH "Client/Server Model
.bp
.nr H1 4
.nr H2 0
.sp 8i
.bp
.LG
.B
.ce
4. CLIENT/SERVER MODEL
.sp 2
.R
.NL
.PP
The most commonly used paradigm in constructing distributed applications
is the client/server model.  In this scheme client applications request
services from a server process.  This implies an asymmetry in establishing
communication between the client and server which has been examined
in section 2.  In this section we will look more closely at the interactions
between client and server, and consider some of the problems in developing
client and server applications.
.PP
The client and server require a well known set of conventions before
service may be rendered (and accepted).  This set of conventions
comprises a protocol which must be implemented at both ends of a
connection.  Depending on the situation, the protocol may be symmetric
or asymmetric.  In a symmetric protocol, either side may play the 
master or slave roles.  In an asymmetric protocol, one side is
immutably recognized as the master, with the other as the slave.  
An example of a symmetric protocol is the TELNET protocol used in
the Internet for remote terminal emulation.  An example
of an asymmetric protocol is the Internet file transfer protocol,
FTP.  No matter whether the specific protocol used in obtaining
a service is symmetric or asymmetric, when accessing a service there
is a \*(lqclient process\*(rq and a \*(lqserver process\*(rq.  We
will first consider the properties of server processes, then
client processes.
.PP
A server process normally listens at a well known address for
service requests.  That is, the server process remains dormant
until a connection is requested by a client's connection
to the server's address.  At such a time
the server process ``wakes up'' and services the client,
performing whatever appropriate actions the client requests of it.
.PP
Alternative schemes which use a service server
may be used to eliminate a flock of server processes clogging the
system while remaining dormant most of the time.  For Internet
servers in 4.4BSD,
this scheme has been implemented via \fIinetd\fP, the so called
``internet super-server.''  \fIInetd\fP listens at a variety
of ports, determined at start-up by reading a configuration file.
When a connection is requested to a port on which \fIinetd\fP is
listening, \fIinetd\fP executes the appropriate server program to handle the
client.  With this method, clients are unaware that an
intermediary such as \fIinetd\fP has played any part in the
connection.  \fIInetd\fP will be described in more detail in
section 5.
.PP
A similar alternative scheme is used by most Xerox services.  In general,
the Courier dispatch process (if used) accepts connections from
processes requesting services of some sort or another.  The client
processes request a particular <program number, version number, procedure
number> triple.  If the dispatcher knows of such a program, it is
started to handle the request; if not, an error is reported to the
client.  In this way, only one port is required to service a large
variety of different requests.  Again, the Courier facilities are
not available without the use and installation of the Courier
compiler.  The information presented in this section applies only
to NS clients and services that do not use Courier.
.NH 2
Servers
.PP
In 4.4BSD most servers are accessed at well known Internet addresses
or UNIX domain names.  For
example, the remote login server's main loop is of the form shown
in Figure 2.
.KF
.if t .ta .5i 1.0i 1.5i 2.0i 2.5i 3.0i 3.5i
.if n .ta .7i 1.4i 2.1i 2.8i 3.5i 4.2i 4.9i
.sp 0.5i
.DS
main(argc, argv)
	int argc;
	char *argv[];
{
	int f;
	struct sockaddr_in from;
	struct servent *sp;

	sp = getservbyname("login", "tcp");
	if (sp == NULL) {
		fprintf(stderr, "rlogind: tcp/login: unknown service\en");
		exit(1);
	}
	...
#ifndef DEBUG
	/* Disassociate server from controlling terminal */
	...
#endif

	sin.sin_port = sp->s_port;	/* Restricted port -- see section 5 */
	...
	f = socket(AF_INET, SOCK_STREAM, 0);
	...
	if (bind(f, (struct sockaddr *) &sin, sizeof (sin)) < 0) {
		...
	}
	...
	listen(f, 5);
	for (;;) {
		int g, len = sizeof (from);

		g = accept(f, (struct sockaddr *) &from, &len);
		if (g < 0) {
			if (errno != EINTR)
				syslog(LOG_ERR, "rlogind: accept: %m");
			continue;
		}
		if (fork() == 0) {
			close(f);
			doit(g, &from);
		}
		close(g);
	}
}
.DE
.ce
Figure 2.  Remote login server.
.sp 0.5i
.KE
.PP
The first step taken by the server is look up its service
definition:
.sp 1
.nf
.in +5
.if t .ta .5i 1.0i 1.5i 2.0i
.if n .ta .7i 1.4i 2.1i 2.8i
sp = getservbyname("login", "tcp");
if (sp == NULL) {
	fprintf(stderr, "rlogind: tcp/login: unknown service\en");
	exit(1);
}
.sp 1
.in -5
.fi
The result of the \fIgetservbyname\fP call
is used in later portions of the code to
define the Internet port at which it listens for service
requests (indicated by a connection).
.KS
.PP
Step two is to disassociate the server from the controlling
terminal of its invoker:
.DS
	for (i = 0; i < 3; ++i)
		close(i);

	open("/", O_RDONLY);
	dup2(0, 1);
	dup2(0, 2);

	i = open("/dev/tty", O_RDWR);
	if (i >= 0) {
		ioctl(i, TIOCNOTTY, 0);
		close(i);
	}
.DE
.KE
This step is important as the server will
likely not want to receive signals delivered to the process
group of the controlling terminal.  Note, however, that
once a server has disassociated itself it can no longer
send reports of errors to a terminal, and must log errors
via \fIsyslog\fP.
.PP
Once a server has established a pristine environment, it
creates a socket and begins accepting service requests.
The \fIbind\fP call is required to insure the server listens
at its expected location.  It should be noted that the
remote login server listens at a restricted port number, and must
therefore be run
with a user-id of root.
This concept of a ``restricted port number'' is 4BSD
specific, and is covered in section 5.
.PP
The main body of the loop is fairly simple:
.DS
.if t .ta .5i 1.0i 1.5i 2.0i
.if n .ta .7i 1.4i 2.1i 2.8i
for (;;) {
	int g, len = sizeof (from);

	g = accept(f, (struct sockaddr *)&from, &len);
	if (g < 0) {
		if (errno != EINTR)
			syslog(LOG_ERR, "rlogind: accept: %m");
		continue;
	}
	if (fork() == 0) {	/* Child */
		close(f);
		doit(g, &from);
	}
	close(g);		/* Parent */
}
.DE
An \fIaccept\fP call blocks the server until
a client requests service.  This call could return a
failure status if the call is interrupted by a signal
such as SIGCHLD (to be discussed in section 5).  Therefore,
the return value from \fIaccept\fP is checked to insure
a connection has actually been established, and
an error report is logged via \fIsyslog\fP if an error
has occurred.
.PP
With a connection
in hand, the server then forks a child process and invokes
the main body of the remote login protocol processing.  Note
how the socket used by the parent for queuing connection
requests is closed in the child, while the socket created as
a result of the \fIaccept\fP is closed in the parent.  The
address of the client is also handed the \fIdoit\fP routine
because it requires it in authenticating clients.
.NH 2
Clients
.PP
The client side of the remote login service was shown
earlier in Figure 1.
One can see the separate, asymmetric roles of the client
and server clearly in the code.  The server is a passive entity,
listening for client connections, while the client process is
an active entity, initiating a connection when invoked.  
.PP
Let us consider more closely the steps taken
by the client remote login process.  As in the server process,
the first step is to locate the service definition for a remote
login:
.DS
sp = getservbyname("login", "tcp");
if (sp == NULL) {
	fprintf(stderr, "rlogin: tcp/login: unknown service\en");
	exit(1);
}
.DE
Next the destination host is looked up with a
\fIgethostbyname\fP call:
.DS
hp = gethostbyname(argv[1]);
if (hp == NULL) {
	fprintf(stderr, "rlogin: %s: unknown host\en", argv[1]);
	exit(2);
}
.DE
With this accomplished, all that is required is to establish a
connection to the server at the requested host and start up the
remote login protocol.  The address buffer is cleared, then filled
in with the Internet address of the foreign host and the port
number at which the login process resides on the foreign host:
.DS
bzero((char *)&server, sizeof (server));
bcopy(hp->h_addr, (char *) &server.sin_addr, hp->h_length);
server.sin_family = hp->h_addrtype;
server.sin_port = sp->s_port;
.DE
A socket is created, and a connection initiated.  Note
that \fIconnect\fP implicitly performs a \fIbind\fP
call, since \fIs\fP is unbound.
.DS
s = socket(hp->h_addrtype, SOCK_STREAM, 0);
if (s < 0) {
	perror("rlogin: socket");
	exit(3);
}
 ...
if (connect(s, (struct sockaddr *) &server, sizeof (server)) < 0) {
	perror("rlogin: connect");
	exit(4);
}
.DE
The details of the remote login protocol will not be considered here.
.NH 2
Connectionless servers
.PP
While connection-based services are the norm, some services
are based on the use of datagram sockets.  One, in particular,
is the \*(lqrwho\*(rq service which provides users with status
information for hosts connected to a local area
network.  This service, while predicated on the ability to
\fIbroadcast\fP information to all hosts connected to a particular
network, is of interest as an example usage of datagram sockets.
.PP
A user on any machine running the rwho server may find out
the current status of a machine with the \fIruptime\fP(1) program.
The output generated is illustrated in Figure 3.
.KF
.DS B
.TS
l r l l l l l.
arpa	up	9:45,	5 users, load	1.15,	1.39,	1.31
cad	up	2+12:04,	8 users, load	4.67,	5.13,	4.59
calder	up	10:10,	0 users, load	0.27,	0.15,	0.14
dali	up	2+06:28,	9 users, load	1.04,	1.20,	1.65
degas	up	25+09:48,	0 users, load	1.49,	1.43,	1.41
ear	up	5+00:05,	0 users, load	1.51,	1.54,	1.56
ernie	down	0:24
esvax	down	17:04
ingres	down	0:26
kim	up	3+09:16,	8 users, load	2.03,	2.46,	3.11
matisse	up	3+06:18,	0 users, load	0.03,	0.03,	0.05
medea	up	3+09:39,	2 users, load	0.35,	0.37,	0.50
merlin	down	19+15:37
miro	up	1+07:20,	7 users, load	4.59,	3.28,	2.12
monet	up	1+00:43,	2 users, load	0.22,	0.09,	0.07
oz	down	16:09
statvax	up	2+15:57,	3 users, load	1.52,	1.81,	1.86
ucbvax	up	9:34,	2 users, load	6.08,	5.16,	3.28
.TE
.DE
.ce
Figure 3. ruptime output.
.sp
.KE
.PP
Status information for each host is periodically broadcast
by rwho server processes on each machine.  The same server
process also receives the status information and uses it
to update a database.  This database is then interpreted
to generate the status information for each host.  Servers
operate autonomously, coupled only by the local network and
its broadcast capabilities.
.PP
Note that the use of broadcast for such a task is fairly inefficient,
as all hosts must process each message, whether or not using an rwho server.
Unless such a service is sufficiently universal and is frequently used,
the expense of periodic broadcasts outweighs the simplicity.
.PP
Multicasting is an alternative to broadcasting.
Setting up multicast sockets is described in Section 5.10.
.PP
The rwho server, in a simplified form, is pictured in Figure
4.  There are two separate tasks performed by the server.  The
first task is to act as a receiver of status information broadcast
by other hosts on the network.  This job is carried out in the
main loop of the program.  Packets received at the rwho port
are interrogated to insure they've been sent by another rwho
server process, then are time stamped with their arrival time
and used to update a file indicating the status of the host.
When a host has not been heard from for an extended period of
time, the database interpretation routines assume the host is
down and indicate such on the status reports.  This algorithm
is prone to error as a server may be down while a host is actually
up, but serves our current needs.
.KF
.DS
.if t .ta .5i 1.0i 1.5i 2.0i
.if n .ta .7i 1.4i 2.1i 2.8i
main()
{
	...
	sp = getservbyname("who", "udp");
	net = getnetbyname("localnet");
	sin.sin_addr = inet_makeaddr(INADDR_ANY, net);
	sin.sin_port = sp->s_port;
	...
	s = socket(AF_INET, SOCK_DGRAM, 0);
	...
	on = 1;
	if (setsockopt(s, SOL_SOCKET, SO_BROADCAST, &on, sizeof(on)) < 0) {
		syslog(LOG_ERR, "setsockopt SO_BROADCAST: %m");
		exit(1);
	}
	bind(s, (struct sockaddr *) &sin, sizeof (sin));
	...
	signal(SIGALRM, onalrm);
	onalrm();
	for (;;) {
		struct whod wd;
		int cc, whod, len = sizeof (from);

		cc = recvfrom(s, (char *)&wd, sizeof (struct whod), 0,
		    (struct sockaddr *)&from, &len);
		if (cc <= 0) {
			if (cc < 0 && errno != EINTR)
				syslog(LOG_ERR, "rwhod: recv: %m");
			continue;
		}
		if (from.sin_port != sp->s_port) {
			syslog(LOG_ERR, "rwhod: %d: bad from port",
				ntohs(from.sin_port));
			continue;
		}
		...
		if (!verify(wd.wd_hostname)) {
			syslog(LOG_ERR, "rwhod: malformed host name from %x",
				ntohl(from.sin_addr.s_addr));
			continue;
		}
		(void) sprintf(path, "%s/whod.%s", RWHODIR, wd.wd_hostname);
		whod = open(path, O_WRONLY | O_CREAT | O_TRUNC, 0666);
		...
		(void) time(&wd.wd_recvtime);
		(void) write(whod, (char *)&wd, cc);
		(void) close(whod);
	}
}
.DE
.ce
Figure 4.  rwho server.
.sp
.KE
.PP
The second task performed by the server is to supply information
regarding the status of its host.  This involves periodically
acquiring system status information, packaging it up in a message
and broadcasting it on the local network for other rwho servers
to hear.  The supply function is triggered by a timer and 
runs off a signal.  Locating the system status
information is somewhat involved, but uninteresting.  Deciding
where to transmit the resultant packet
is somewhat problematical, however.
.PP
Status information must be broadcast on the local network.
For networks which do not support the notion of broadcast another
scheme must be used to simulate or
replace broadcasting.  One possibility is to enumerate the
known neighbors (based on the status messages received
from other rwho servers).  This, unfortunately,
requires some bootstrapping information,
for a server will have no idea what machines are its
neighbors until it receives status messages from them.
Therefore, if all machines on a net are freshly booted,
no machine will have any
known neighbors and thus never receive, or send, any status information.
This is the identical problem faced by the routing table management
process in propagating routing status information.  The standard
solution, unsatisfactory as it may be, is to inform one or more servers
of known neighbors and request that they always communicate with
these neighbors.  If each server has at least one neighbor supplied
to it, status information may then propagate through
a neighbor to hosts which
are not (possibly) directly neighbors.  If the server is able to
support networks which provide a broadcast capability, as well as
those which do not, then networks with an
arbitrary topology may share status information*.
.FS
* One must, however, be concerned about \*(lqloops\*(rq.
That is, if a host is connected to multiple networks, it
will receive status information from itself.  This can lead
to an endless, wasteful, exchange of information.
.FE
.PP
It is important that software operating in a distributed
environment not have any site-dependent information compiled into it.
This would require a separate copy of the server at each host and
make maintenance a severe headache.  4.4BSD attempts to isolate
host-specific information from applications by providing system
calls which return the necessary information*.
.FS
* An example of such a system call is the \fIgethostname\fP(2)
call which returns the host's \*(lqofficial\*(rq name.
.FE
A mechanism exists, in the form of an \fIioctl\fP call,
for finding the collection
of networks to which a host is directly connected.
Further, a local network broadcasting mechanism
has been implemented at the socket level.
Combining these two features allows a process
to broadcast on any directly connected local
network which supports the notion of broadcasting
in a site independent manner.  This allows 4.4BSD
to solve the problem of deciding how to propagate
status information in the case of \fIrwho\fP, or
more generally in broadcasting:
Such status information is broadcast to connected
networks at the socket level, where the connected networks
have been obtained via the appropriate \fIioctl\fP
calls.
The specifics of
such broadcastings are complex, however, and will
be covered in section 5.