1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
|
.\" $OpenBSD: nmea.4,v 1.26 2018/09/02 08:14:25 landry Exp $
.\"
.\" Copyright (c) 2006, 2007 Marc Balmer <mbalmer@openbsd.org>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd $Mdocdate: September 2 2018 $
.Dt NMEA 4
.Os
.Sh NAME
.Nm nmea
.Nd NMEA 0183 timedelta sensor
.Sh SYNOPSIS
.Cd "pseudo-device nmea" Op Ar count
.Sh DESCRIPTION
This line discipline interfaces NMEA devices,
such as GPS receivers attached to a serial or USB port.
.Pp
The line discipline is enabled by the following sequence:
.Bd -literal -offset indent
#include <sys/ioctl.h>
int ldisc = NMEADISC, fildes; ...
ioctl(fildes, TIOCSETD, &ldisc);
.Ed
.Pp
The byte stream is unaltered by the line discipline which
maintains timedelta and position sensors using the NMEA data.
The sensors will appear as nmea* in the list.
The timedelta (nanoseconds difference between the received time
information and the local time), and position (calculated
latitude and longitude in degrees) can be accessed through the
.Xr sysctl 8
interface.
.Pp
The
.Nm
line discipline decodes NMEA 0183
Recommended Minimum Specific GPS/TRANSIT Data sentences.
The time and date information and position are extracted.
The warning indication is used to provide the sensor status (see below).
If the attached device sends the RMC message in the 13-field format,
the operation mode of the GPS device is reported in the sensor description.
The sensor timestamp is copied from the tty timestamp if a device with PPS
is being used and tty timestamping has been turned on.
Otherwise the sensor timestamp is taken when the initial `$' character of
a message block is received from the NMEA device.
.Pp
RMC messages source are recognised by the first two characters of the
sentence according to the following prefixes:
.Pp
.Bl -tag -width "XXXXX" -offset indent -compact
.It GP
GPS
.It GA
Galileo
.It BD
BeiDou
.It GL
Glonass
.It GN
Generic GNSS
.El
.Sh SENSOR STATES
The quality of the timedelta is reported as the sensor status:
.Bl -tag -width "CRITICALXX" -offset indent
.It OK
The time information and position are valid.
The timedelta is safe to use for applications like
.Xr ntpd 8 .
.It WARN
The attached GPS receiver has been indicating a warning condition
for at least the last ten minutes.
The timedelta should be used with care.
.It CRITICAL
tty timestamping has been turned on but there is no PPS signal present or the
GPS receiver indicated a warning condition for at least the last twenty
minutes.
Check your hardware.
Some GPS units need PPS to be manually turned on.
.El
.Pp
The status of a second sensor is used to report the status of the
device itself:
.Bl -tag -width "CRITICALXX" -offset indent
.It OK
The clock is synchronized, e.g. a GPS receiver has a fix.
.It WARN
The device issued a warning condition, e.g. a GPS receiver has no fix.
.El
.Sh SEE ALSO
.Xr tty 4 ,
.Xr ldattach 8 ,
.Xr ntpd 8 ,
.Xr sysctl 8
.Sh HISTORY
The
.Nm
interface first appeared in
.Ox 4.0 .
.Sh AUTHORS
The
.Nm
line discipline was written by
.An Marc Balmer Aq Mt mbalmer@openbsd.org .
|
