path: root/share/man/man9/style.9

.\" Copyright (c) 1995 FreeBSD Inc.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL [your name] OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	$OpenBSD: style.9,v 1.11 2000/12/21 15:41:26 aaron Exp $
.\"
.Dd August 19, 1999
.Dt STYLE 9
.Os
.Sh NAME
.Nm style
.Nd "Kernel source file style guide"
.Sh DESCRIPTION
This file specifies the preferred style for kernel source files in the
.Ox
source tree.
It is also a guide for preferred user land code style.
These guidelines should be followed for all new code.
In general, code can be considered
.Dq new code
when it makes up about 50% or more of the file(s) involved.
This is enough to break precedents in the existing code and use the
current style guidelines.
.Bd -literal -offset 0i
/*
 * Style guide for the OpenBSD KNF (Kernel Normal Form).
 */

/*
 * VERY important single-line comments look like this.
 */

/* Most single-line comments look like this. */

/*
 * Multi-line comments look like this.  Make them real sentences.  Fill
 * them so they look like real paragraphs.
 */
.Ed
.Pp
Kernel include files (i.e.,
.Pa Aq sys/*.h )
come first; normally, you'll need
.Pa Aq sys/types.h
OR
.Pa Aq sys/param.h ,
but not both!
.Pa Aq sys/types.h
includes
.Pa Aq sys/cdefs.h ,
and it's okay to depend on that.
.Bd -literal -offset 0i
#include <sys/types.h>		/* Non-local includes in brackets. */
.Ed
.Pp
If it's a network program, put the network include files next.
.Bd -literal -offset 0i
#include <net/if.h>
#include <net/if_dl.h>
#include <net/route.h>
#include <netinet/in.h>
#include <protocols/rwhod.h>
.Ed
.Pp
Then there's a blank line, followed by the
.Pa /usr
include files.
The
.Pa /usr
include files should be sorted!
.Bd -literal -offset 0i
#include <stdio.h>
.Ed
.Pp
Global pathnames are defined in
.Pa /usr/include/paths.h .
Pathnames local to the program go in
.Pa pathnames.h
in the local directory.
.Bd -literal -offset 0i
#include <paths.h>
.Ed
.Pp
Then, there's a blank line, and the user include files.
.Bd -literal -offset 0i
#include "pathnames.h"		/* Local includes in double quotes. */
.Ed
.Pp
All functions are prototyped somewhere.
.Pp
Function prototypes for private functions (i.e., functions not used
elsewhere) go at the top of the first source module.
In user land, functions local to one source module should be declared
.Ql static .
This should not be done in kernel land since it makes it impossible
to use the kernel debugger.
.Pp
Functions used from other parts of the kernel are prototyped in the
relevant include file.
.Pp
Functions that are used locally in more than one module go into a
separate header file, e.g.,
.Pa extern.h .
.Pp
When declaring a prototype, use the
.Li __P
macro from the include file
.Pa Aq sys/cdefs.h .
Only the kernel has a name associated with the types; i.e., in the kernel use:
.Bd -literal -offset 0i
void	function __P((int a));
.Ed
and in user land use:
.Bd -literal -offset 0i
void	function __P((int));
.Ed
.Pp
Prototypes may have an extra space after a tab to enable function names
to line up:
.Bd -literal -offset 0i
static char	*function __P((int, const char *));
static void	 usage __P((void));
.Ed
.Pp
Use
.Li __dead
from
.Pa Aq sys/cdefs.h
for functions that don't return, e.g.,
.Bd -literal -offset 0i
__dead void	abort __P((void));
.Ed
.Pp
In header files, put function prototypes within
.Dv __BEGIN_DECLS / __END_DECLS
matching pairs.
This makes the header file usable from C++.
.Pp
Macros are capitalized and parenthesized, and should avoid side-effects.
If they are an inline expansion of a function, the function is defined
all in lowercase; the macro has the same name all in uppercase.
If the macro needs more than a single line, use braces.
Right-justify the backslashes, as the resulting definition is easier to read.
If the macro encapsulates a compound statement, enclose it in a
.Dq Li do
loop,
so that it can safely be used in
.Dq Li if
statements.
Any final statement-terminating semicolon should be
supplied by the macro invocation rather than the macro, to make parsing easier
for pretty-printers and editors.
.Bd -literal -offset 0i
#define	MACRO(x, y) do {						\e
	variable = (x) + (y);						\e
	(y) += 2;							\e
} while (0)
.Ed
.Pp
Enumeration values are all uppercase.
.Bd -literal -offset 0i
enum enumtype { ONE, TWO } et;
.Ed
.Pp
When declaring variables in structures, declare them sorted by use, then
by size, and then by alphabetical order.
The first category normally doesn't apply, but there are exceptions.
Each one gets its own line.
Put a tab after the first word, i.e., use
.Ql int^Ix;
and
.Ql struct^Ifoo *x; .
.Pp
Major structures should be declared at the top of the file in which they
are used, or in separate header files if they are used in multiple
source files.
Use of the structures should be by separate declarations and should be
.Dq Li extern
if they are declared in a header file.
.Bd -literal -offset 0i
struct foo {
	struct	foo *next;	/* List of active foo */
	struct	mumble amumble;	/* Comment for mumble */
	int	bar;
};
struct foo *foohead;		/* Head of global foo list */
.Ed
.Pp
Use
.Xr queue 3
macros rather than rolling your own lists, whenever possible.
Thus, the previous example would be better written:
.Bd -literal -offset 0i
#include <sys/queue.h>
struct	foo {
	LIST_ENTRY(foo)	link;	/* Queue macro glue for foo lists */
	struct	mumble amumble;	/* Comment for mumble */
	int	bar;
};
LIST_HEAD(, foo) foohead;	/* Head of global foo list */
.Ed
.Pp
Avoid using typedefs for structure types.
This makes it impossible
for applications to use pointers to such a structure opaquely, which
is both possible and beneficial when using an ordinary struct tag.
When convention requires a typedef, make its name match the struct tag.
Avoid typedefs ending in
.Dq Li \&_t ,
except as specified in Standard C or by
.Tn POSIX .
Don't use the same name for a struct tag and a typedef, as this makes
the code unusable from C++.
.Bd -literal -offset 0i
/* Make the structure name match the typedef. */
typedef struct _bar {
	int	level;
} BAR;
.Ed
.Pp
.Bd -literal -offset 0i
/*
 * All major routines should have a comment briefly describing what
 * they do.  The comment before the "main" routine should describe
 * what the program does.
 */
int
main(int argc, char *argv[])
{
	long num;
	int ch;
	char *ep;

.Ed
.Pp
For consistency,
.Xr getopt 3
should be used to parse options.
Options should be sorted in the
.Xr getopt 3
call and the switch statement, unless
parts of the switch cascade.
Elements in a switch statement that cascade should have a FALLTHROUGH comment.
Numerical arguments should be checked for accuracy.
Code that cannot be reached should have a NOTREACHED comment,
.Bd -literal -offset 0i
	while ((ch = getopt(argc, argv, "abn")) != -1)
		switch (ch) {		/* Indent the switch. */
		case 'a':		/* Don't indent the case. */
			aflag = 1;
			/* FALLTHROUGH */
		case 'b':
			bflag = 1;
			break;
		case 'n':
			num = strtol(optarg, &ep, 10);
			if (num <= 0 || *ep != '\e0') {
				warnx("illegal number, -n argument -- %s",
				    optarg);
				usage();
			}
			break;
		case '?':
		default:
			usage();
			/* NOTREACHED */
		}
	argc -= optind;
	argv += optind;

.Ed
.Pp
Use space after keywords
.Pf ( Li if ,
.Li while ,
.Li for ,
.Li return ,
.Li switch ) .
No braces are
used for control statements with zero or only a single statement unless that
statement is more than a single line, in which case they are permitted.
Forever loops are done with
.Li for ,
not
.Li while .
.Bd -literal -offset 0i
	for (p = buf; *p != '\e0'; ++p)
		;	/* nothing */
	for (;;)
		stmt;
	for (;;) {
		z = a + really + long + statement + that + needs +
		    two + lines + gets + indented + four + spaces +
		    on + the + second + and + subsequent + lines;
	}
	for (;;) {
		if (cond)
			stmt;
	}
.Ed
.Pp
Parts of a for loop may be left empty.
Don't put declarations inside blocks unless the routine is
unusually complicated.
.Bd -literal -offset 0i
	for (; cnt < 15; cnt++) {
		stmt1;
		stmt2;
	}
.Ed
.Pp
Indentation is an 8 character tab.
Second level indents are four spaces.
.Bd -literal -offset 0i
	while (cnt < 20)
		z = a + really + long + statement + that + needs +
		    two lines + gets + indented + four + spaces +
		    on + the + second + and + subsequent + lines;
.Ed
.Pp
Do not add whitespace at the end of a line, and only use tabs
followed by spaces to form the indentation.
Do not use more spaces than a tab will produce
and do not use spaces in front of tabs.
.Pp
Closing and opening braces go on the same line as the else.
Braces that aren't necessary may be left out, unless they cause
a compiler warning.
.Bd -literal -offset 0i
	if (test)
		stmt;
	else if (bar) {
		stmt;
		stmt;
	} else
		stmt;
.Ed
.Pp
Do not use spaces after function names.
Commas have a space after them.
Do not use spaces after
.Sq \&(
or
.Sq \&[
or preceding
.Sq \&]
or
.Sq \&)
characters.
.Bd -literal -offset 0i
	if (error = function(a1, a2))
		exit(error);
.Ed
.Pp
Unary operators don't require spaces, binary operators do.
Don't use parentheses unless they're required for precedence, the statement
is confusing without them, or the compiler generates a warning without them.
Remember that other people may be confused more easily than you.
Do YOU understand the following?
.Bd -literal -offset 0i
	a = b->c[0] + ~d == (e || f) || g && h ? i : j >> 1;
	k = !(l & FLAGS);
.Ed
.Pp
Exits should be 0 on success, or according to the predefined
values in
.Xr sysexits 3 .
.Bd -literal -offset 0i
	exit(EX_OK);	/*
			 * Avoid obvious comments such as
			 * "Exit 0 on success."
			 */
}
.Ed
.Pp
The function type should be on a line by itself
preceding the function.
.Bd -literal -offset 0i
static char *
function(a1, a2, fl, a4)
	int a1, a2, a4;	/* Declare ints too, don't default them. */
	float fl;	/* List in order declared, as much as possible. */
{
.Ed
.Pp
When declaring variables in functions declare them sorted by size,
then in alphabetical order; multiple ones per line are okay.
Old style function declarations can go on the same line.
ANSI style function declarations should go in the include file
.Dq Pa extern.h .
If a line overflows reuse the type keyword.
.Pp
Be careful to not obfuscate the code by initializing variables in
the declarations.
Use this feature only thoughtfully.
DO NOT use function calls in initializers!
.Bd -literal -offset 0i
	struct foo one, *two;
	double three;
	int *four, five;
	char *six, seven, eight, nine, ten, eleven, twelve;

	four = myfunction();
.Ed
.Pp
Do not declare functions inside other functions; ANSI C says that
such declarations have file scope regardless of the nesting of the
declaration.
Hiding file declarations in what appears to be a local scope is
undesirable and will elicit complaints from a good compiler, such as
.Dq Li gcc -Wtraditional .
.Pp
Casts and sizeof's are not followed by a space.
Note that
.Xr indent 1
does not understand this rule.
.Pp
.Dv NULL
is the preferred null pointer constant.
Use
.Dv NULL
instead of
(type\ *)0 or (type\ *)NULL in contexts where the compiler knows the
type, e.g., in assignments.
Use (type\ *)NULL in other contexts, in particular for all function args.
(Casting is essential for variadic args and is necessary for other args
if the function prototype might not be in scope.)
Test pointers
against
.Dv NULL ,
e.g., use:
.Bd -literal -offset 0i
(p = f()) == NULL
.Ed
.Pp
not:
.Bd -literal -offset 0i
!(p = f())
.Ed
.Pp
Don't use
.Ql \&!
for tests unless it's a boolean, e.g., use
.Bd -literal -offset 0i
if (*p == '\e0')
.Ed
.Pp
not
.Bd -literal -offset 0i
if (!*p)
.Ed
.Pp
Routines returning
.Li void *
should not have their return values cast to any pointer type.
.Pp
Use
.Xr err 3
or
.Xr warn 3 ,
don't roll your own!
.Bd -literal -offset 0i
	if ((four = malloc(sizeof(struct foo))) == NULL)
		err(1, (char *)NULL);
	if ((six = (int *)overflow()) == NULL)
		errx(1, "Number overflowed.");
	return (eight);
}
.Ed
.Pp
Don't use ANSI function declarations unless you absolutely have to,
i.e., you're declaring functions with variable numbers of arguments.
.Pp
ANSI function declarations look like this:
.Bd -literal -offset 0i
void
function(int a1, int a2)
{
	...
}
.Ed
.Pp
Variable numbers of arguments should look like this:
.Bd -literal -offset 0i
#if __STDC__
#include <stdarg.h>
#else
#include <varargs.h>
#endif

void
#if __STDC__
vaf(const char *fmt, ...)
#else
vaf(fmt, va_alist)
	char *fmt;
	va_dcl
#endif
{
	va_list ap;
#if __STDC__
	va_start(ap, fmt);
#else
	va_start(ap);
#endif

	STUFF;

	va_end(ap);

	/* No return needed for void functions. */
}

static void
usage()
{
	extern char *__progname;	/* from crt0.o */
.Ed
.Pp
Use
.Xr printf 3 ,
not fputs/puts/putchar/whatever; it's faster and usually cleaner, not
to mention helpful in avoiding stupid bugs.
.Pp
Usage statements should look like the manual pages.
Options without
operands come first, in alphabetical order inside a single set of
braces, followed by options with operands, in alphabetical order,
each in braces, followed by required arguments in the order they
are specified, followed by optional arguments in the order they
are specified.
A bar
.Pq Sq \&|
separates either-or options/arguments,
and multiple options/arguments which are specified together are
placed in a single set of braces.
.Pp
.Bd -ragged -offset 0.3i
"usage: f [-ade] [-b b_arg] [-m m_arg] req1 req2 [opt1 [opt2]]\en"
"usage: f [-a | -b] [-c [-de] [-n number]]\en"
.Ed
.Pp
The
.Li __progname
string, should be used instead of hard-coding the program name.
.Bd -literal -offset 0i
	(void)fprintf(stderr, "usage: %s [-ab]\en", __progname);
	exit(1);
}
.Ed
.Pp
New core kernel code should be reasonably compliant with the style guides.
The guidelines for third-party maintained modules and device drivers are more
relaxed but at a minimum should be internally consistent with their style.
.Pp
Stylistic changes (including whitespace changes) are hard on the source
repository and are to be avoided without good reason.
Code that is approximately KNF compliant in the repository must not diverge
from compliance.
.Pp
Whenever possible, code should be run through a code checker
(e.g.,
.Dq Li gcc -Wall -W -Wtraditional -Wpointer-arith -Wbad-function-cast ... ,
.Xr lint 1
or lclint from the ports tree) and produce minimal warnings.
.Sh SEE ALSO
.Xr indent 1 ,
.Xr err 3 ,
.Xr queue 3 ,
.Xr sysexits 3 ,
.Xr warn 3
.Sh HISTORY
This man page is largely based on the src/admin/style/style file from
the
.Tn BSD
4.4-Lite2 release, with updates to reflect the current practice and
desire of the
.Tn OpenBSD
project.