summaryrefslogtreecommitdiff
path: root/sys/arch/alpha/tc/tcdsreg.h
blob: c8839b8cf7cb3efb662a867c9b4bdb6c29e0e86a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
/*	$OpenBSD: tcdsreg.h,v 1.3 1996/10/30 22:41:29 niklas Exp $	*/
/*	$NetBSD: tcdsreg.h,v 1.2 1996/07/09 00:55:42 cgd Exp $	*/

/*
 * Copyright (c) 1994, 1995 Carnegie-Mellon University.
 * All rights reserved.
 *
 * Authors: Keith Bostic, Chris G. Demetriou
 * 
 * Permission to use, copy, modify and distribute this software and
 * its documentation is hereby granted, provided that both the copyright
 * notice and this permission notice appear in all copies of the
 * software, derivative works or modified versions, and any portions
 * thereof, and that both notices appear in supporting documentation.
 * 
 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" 
 * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND 
 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
 * 
 * Carnegie Mellon requests users of this software to return to
 *
 *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
 *  School of Computer Science
 *  Carnegie Mellon University
 *  Pittsburgh PA 15213-3890
 *
 * any improvements or extensions that they make and grant Carnegie the
 * rights to redistribute these changes.
 */

/*
 * Offsets to the SCSI chips
 */
#define	TCDS_SCSI0_OFFSET	0x080000
#define	TCDS_SCSI1_OFFSET	0x080100

/*
 * TCDS register offsets, bit masks.
 */
#define	TCDS_CIR		  0x040000	/* CIR offset */

/*
 * TCDS CIR control bits.
 */
#define	TCDS_CIR_GPO_0		0x00000001	/* Not used */
#define	TCDS_CIR_GPO_1		0x00000002	/* Not used */
#define	TCDS_CIR_GPO_2		0x00000004	/* Not used */
#define	TCDS_CIR_STD		0x00000008	/* Serial transmit disable */
#define	TCDS_CIR_GPI_0		0x00000010	/* Not used */
#define	TCDS_CIR_GPI_1		0x00000020	/* Not used */
#define	TCDS_CIR_GPI_2		0x00000040	/* Not used */
#define	TCDS_CIR_GPI_3		0x00000080	/* Not used */
#define TCDS_CIR_SCSI0_DMAENA	0x00000100	/* SCSI 0 DMA enable */
#define TCDS_CIR_SCSI1_DMAENA	0x00000200	/* SCSI 1 DMA enable */
#define	TCDS_CIR_SCSI0_RESET	0x00000400	/* SCSI 0 reset */
#define	TCDS_CIR_SCSI1_RESET	0x00000800	/* SCSI 1 reset */
#define	TCDS_CIR_SCSI0_DMA_TEST	0x00001000	/* SCSI 0 DMA buf parity test */
#define	TCDS_CIR_SCSI1_DMA_TEST	0x00002000	/* SCSI 1 DMA buf parity test */
#define	TCDS_CIR_DB_PAR		0x00004000	/* DB parity test mode */
#define	TCDS_CIR_TC_PAR		0x00008000	/* TC parity test mode */
#define	TCDS_CIR_ALLCONTROL	0x0000ffff	/* all control bits */

/* TCDS CIR interrupt bits. */
#define	TCDS_CIR_SCSI0_DREQ	0x00010000	/* SCSI 0 DREQ */
#define	TCDS_CIR_SCSI1_DREQ	0x00020000	/* SCSI 1 DREQ */
#define	TCDS_CIR_SCSI0_INT	0x00040000	/* SCSI 0 interrupt */
#define	TCDS_CIR_SCSI1_INT	0x00080000	/* SCSI 1 interrupt */
#define	TCDS_CIR_SCSI0_PREFETCH	0x00100000	/* SCSI 0 prefetch */
#define	TCDS_CIR_SCSI1_PREFETCH	0x00200000	/* SCSI 1 prefetch */
#define	TCDS_CIR_SCSI0_DMA	0x00400000	/* SCSI 0 DMA error */
#define	TCDS_CIR_SCSI1_DMA	0x00800000	/* SCSI 1 DMA error */
#define	TCDS_CIR_SCSI0_DB	0x01000000	/* SCSI 0 DB parity */
#define	TCDS_CIR_SCSI1_DB	0x02000000	/* SCSI 1 DB parity */
#define	TCDS_CIR_SCSI0_DMAB_PAR	0x04000000	/* SCSI 0 DMA buffer parity */
#define	TCDS_CIR_SCSI1_DMAB_PAR	0x08000000	/* SCSI 1 DMA buffer parity */
#define	TCDS_CIR_SCSI0_DMAR_PAR	0x10000000	/* SCSI 0 DMA read parity */
#define	TCDS_CIR_SCSI1_DMAR_PAR	0x20000000	/* SCSI 1 DMA read parity */
#define	TCDS_CIR_TCIOW_PAR	0x40000000	/* TC I/O write parity */
#define	TCDS_CIR_TCIOA_PAR	0x80000000	/* TC I/O address parity */
#define	TCDS_CIR_ALLINTR	0xffff0000	/* all interrupt bits */

#define TCDS_CIR_CLR(c, b)	c = ((c | TCDS_CIR_ALLINTR) & ~b)
#define TCDS_CIR_SET(c, b)	c = ((c | TCDS_CIR_ALLINTR) | b)

/* TCDS IMER masks and enables, for interrupts in the CIR. */
#define	TCDS_IMER_SCSI0_MASK	      0x04	/* SCSI 0 intr/enable mask */
#define	TCDS_IMER_SCSI1_MASK	      0x08	/* SCSI 1 intr/enable mask */
#define	TCDS_IMER_SCSI0_ENB	(TCDS_IMER_SCSI0_MASK << 16)
#define	TCDS_IMER_SCSI1_ENB	(TCDS_IMER_SCSI1_MASK << 16)
#define	TCDS_IMER		  0x040004	/* IMER offset */

#define	TCDS_SCSI0_DMA_ADDR	  0x041000	/* DMA address */
#define	TCDS_SCSI0_DMA_INTR	  0x041004	/* DMA interrupt control */
#define	TCDS_SCSI0_DMA_DUD0	  0x041008	/* DMA unaligned data[0] */
#define	TCDS_SCSI0_DMA_DUD1	  0x04100c	/* DMA unaligned data[1] */

#define	TCDS_SCSI1_DMA_ADDR	  0x041100	/* DMA address */
#define	TCDS_SCSI1_DMA_INTR	  0x041104	/* DMA interrupt control */
#define	TCDS_SCSI1_DMA_DUD0	  0x041108	/* DMA unaligned data[0] */
#define	TCDS_SCSI1_DMA_DUD1	  0x04110c	/* DMA unaligned data[1] */

#define	TCDS_DIC_ADDRMASK	      0x03	/* DMA address bits <1:0> */
#define	TCDS_DIC_READ_PREFETCH	      0x40	/* DMA read prefetch enable */
#define	TCDS_DIC_WRITE		      0x80	/* DMA write */

#define	TCDS_DUD0_VALID00	0x00000001	/* byte 00 valid mask (zero) */
#define	TCDS_DUD0_VALID01	0x00000002	/* byte 01 valid mask */
#define	TCDS_DUD0_VALID10	0x00000004	/* byte 10 valid mask */
#define	TCDS_DUD0_VALID11	0x00000008	/* byte 11 valid mask */
#define	TCDS_DUD0_VALIDBITS	0x0000000f	/* bits that show valid bytes */

#define	TCDS_DUD1_VALID00	0x01000000	/* byte 00 valid mask */
#define	TCDS_DUD1_VALID01	0x02000000	/* byte 01 valid mask */
#define	TCDS_DUD1_VALID10	0x04000000	/* byte 10 valid mask */
#define	TCDS_DUD1_VALID11	0x08000000	/* byte 11 valid mask (zero) */
#define	TCDS_DUD1_VALIDBITS	0x0f000000	/* bits that show valid bytes */

#define	TCDS_DUD_BYTE00		0x000000ff	/* byte 00 mask */
#define	TCDS_DUD_BYTE01		0x0000ff00	/* byte 01 mask */
#define	TCDS_DUD_BYTE10		0x00ff0000	/* byte 10 mask */
#define	TCDS_DUD_BYTE11		0xff000000	/* byte 11 mask */

#if 0
int  tcds_scsi_iserr __P((struct dma_softc *));
int  tcds_scsi_isintr __P((int, int));
void tcds_dma_disable __P((int));
void tcds_dma_enable __P((int));
void tcds_dma_init __P((struct dma_softc *, int));
void tcds_scsi_disable __P((int));
void tcds_scsi_enable __P((int));
void tcds_scsi_reset __P((int));

/*
 * XXX
 * Start of MACH #defines, minimal changes to port to {Net/Open}BSD.
 * 
 * The following register is the SCSI control interrupt register.  It
 * starts, stops and resets scsi DMA.  It takes over the SCSI funtions
 * that were handled by the ASIC on the 3min.
 */
#define KN15AA_SYS_SCSI		0x1d0000000
#define KN15AA_REG_SCSI_CIR	(KN15AA_SYS_SCSI + 0x80000)
#define SCSI_CIR_AIOPAR		0x80000000 /* TC IO Address parity error */
#define SCSI_CIR_WDIOPAR	0x40000000 /* TC IO  write data parity error */
#define SCSI_CIR_DMARPAR1	0x20000000 /* SCSI[1] TC DMA read data parity */
#define SCSI_CIR_DMARPAR0	0x10000000 /* SCSI[0] TC DMA read data parity */
#define SCSI_CIR_DMABUFPAR1	0x08000000 /* SCSI[1] DMA buffer parity error */
#define SCSI_CIR_DMABUFPAR0	0x04000000 /* SCSI[0] DMA buffer parity error */
#define SCSI_CIR_DBPAR1		0x02000000 /* SCSI[1] DB parity error */
#define SCSI_CIR_DBPAR0		0x01000000 /* SCSI[0] DB parity error */
#define SCSI_CIR_DMAERR1	0x00800000 /* SCSI[1] DMA error */
#define SCSI_CIR_DMAERR0	0x00400000 /* SCSI[0] DMA error */
#if fmm50
#define SCSI_CIR_xxx0		0x00200000 /* RESERVED */
#define SCSI_CIR_xxx1		0x00100000 /* RESERVED */
#else
#define SCSI_CIR_PREF1		0x00200000 /* 53C94 prefetch interupt */
#define SCSI_CIR_PREF0		0x00100000 /* 53C94 prefetch interupt */
#endif
#define SCSI_CIR_53C94_INT1	0x00080000 /* SCSI[1] 53C94 Interupt */
#define SCSI_CIR_53C94_INT0	0x00040000 /* SCSI[0] 53C94 Interupt */
#define SCSI_CIR_53C94_DREQ1	0x00020000 /* SCSI[1] 53C94 DREQ */
#define SCSI_CIR_53C94_DREQ0	0x00010000 /* SCSI[0] 53C94 DREQ */
#define SCSI_CIR_TC_PAR_TEST	0x00008000 /* TC parity test mode */
#define SCSI_CIR_DB_PAR_TEST	0x00004000 /* DB parity test mode */
#define SCSI_CIR_DBUF_PAR_TEST1	0x00002000 /* SCSI[1] DMA buffer parity test */
#define SCSI_CIR_DBUF_PAR_TEST0	0x00001000 /* SCSI[0] DMA buffer parity test */
#define SCSI_CIR_RESET1		0x00000800 /* SCSI[1] ~Reset,enable(0)/disable(1) */
#define SCSI_CIR_RESET0		0x00000400 /* SCSI[0] ~Reset,enable(0)/disable(1) */
#define SCSI_CIR_DMAENA1	0x00000200 /* SCSI[1] DMA enable */
#define SCSI_CIR_DMAENA0	0x00000100 /* SCSI[1] DMA enable */
#define SCSI_CIR_GPI3		0x00000080 /* General purpose input <3> */
#define SCSI_CIR_GPI2		0x00000040 /* General purpose input <2> */
#define SCSI_CIR_GPI1		0x00000020 /* General purpose input <1> */
#define SCSI_CIR_GPI0		0x00000010 /* General purpose input <0> */
#define SCSI_CIR_TXDIS		0x00000008 /* TXDIS- serial transmit disable */
#define SCSI_CIR_GPO2		0x00000004 /* General purpose output <2> */
#define SCSI_CIR_GPO1		0x00000002 /* General purpose output <1> */
#define SCSI_CIR_GPO0		0x00000001 /* General purpose output <0> */
#define SCSI_CIR_ERROR (SCSI_CIR_AIOPAR | SCSI_CIR_WDIOPAR | SCSI_CIR_DMARPAR1 | SCSI_CIR_DMARPAR0 | SCSI_CIR_DMABUFPAR1 | SCSI_CIR_DMABUFPAR0 | SCSI_CIR_DBPAR1 |SCSI_CIR_DBPAR0 | SCSI_CIR_DMAERR1 | SCSI_CIR_DMAERR0 )

#define KN15AA_REG_SCSI_DMAPTR0 (KN15AA_SYS_SCSI + 0x82000)
#define KN15AA_REG_SCSI_DMAPTR1 (KN15AA_SYS_SCSI + 0x82200)

#define KN15AA_REG_SCSI_DIC0 (KN15AA_SYS_SCSI + 0x82008)
#define KN15AA_REG_SCSI_DIC1 (KN15AA_SYS_SCSI + 0x82208)
#define SCSI_DIC_DMADIR		0x00000080 /* DMA direction read(0)/write(1) */
#define SCSI_DIC_PREFENA	0x00000040 /* DMA read prefetch dis(0)/ena(1) */
#define SCSI_DIC_DMAADDR1	0x00000002 /* DMA address <1> */
#define SCSI_DIC_DMAADDR0	0x00000001 /* DMA address <0> */
#define SCSI_DIC_ADDR_MASK	(SCSI_DIC_DMAADDR0 |SCSI_DIC_DMAADDR1)

#define KN15AA_REG_SCSI_94REG0	(KN15AA_SYS_SCSI + 0x100000)
#define KN15AA_REG_SCSI_94REG1	(KN15AA_SYS_SCSI + 0x100200)

#define KN15AA_REG_SCSI_IMER	(KN15AA_SYS_SCSI + 0x80008)

/* these are the bits that were unalligned at the beginning of the dma */
#define KN15AA_REG_SCSI_DUDB0	(KN15AA_SYS_SCSI + 0x82010)
#define KN15AA_REG_SCSI_DUDB1	(KN15AA_SYS_SCSI + 0x82210)
#	define SCSI_DUDB_MASK01	0x00000001 /* Mask bit for byte[01] */
#	define SCSI_DUDB_MASK10	0x00000002 /* Mask bit for byte[10] */
#	define SCSI_DUDB_MASK11	0x00000004 /* Mask bit for byte[11] */

/* these are the bits that were unalligned at the end of the dma */
#define KN15AA_REG_SCSI_DUDE0	(KN15AA_SYS_SCSI + 0x82018)
#define KN15AA_REG_SCSI_DUDE1	(KN15AA_SYS_SCSI + 0x82218)
#	define SCSI_DUDE_MASK00	0x1000000 /* Mask bit for byte[00] */
#	define SCSI_DUDE_MASK01	0x2000000 /* Mask bit for byte[01] */
#	define SCSI_DUDE_MASK10	0x4000000 /* Mask bit for byte[10] */

#define	SCSI_CIR	ALPHA_PHYS_TO_K0SEG(KN15AA_REG_SCSI_CIR)
#define	SCSI_IMER	ALPHA_PHYS_TO_K0SEG(KN15AA_REG_SCSI_IMER)

#endif