1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
|
/* $OpenBSD: if_qnreg.h,v 1.3 1997/01/16 09:24:48 niklas Exp $ */
/* $NetBSD: if_qnreg.h,v 1.2 1995/11/30 00:57:04 jtc Exp $ */
/*
* Copyright (c) 1995 Mika Kortelainen
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mika Kortelainen
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Thanks for Aspecs Oy (Finland) for the data book for the NIC used
* in this card and also many thanks for the Resource Management Force
* (QuickNet card manufacturer) and especially Daniel Koch for providing
* me with the necessary 'inside' information to write the driver.
*
*/
/*
* The QuickNet card uses the Fujitsu's MB86950B NIC (Network Interface
* Controller) chip, located at card base address + 0xff00. NIC registers
* are accessible only at even byte addresses, so the register offsets must
* be multiplied by two. Actually, these registers are read/written as words.
*
* As the card doesn't use DMA, data is input/output at FIFO register
* (base address + 0xff20). The card has 64K buffer memory and is pretty
* fast despite the lack of DMA.
*
* The FIFO register MUST be accessed as a word (16 bits).
*
*/
#define QUICKNET_NIC_BASE 0xff00
#define NIC_DLCR0 ( 0 ) /* Transmit status */
#define NIC_DLCR1 ( 1 * 2) /* Transmit masks */
#define NIC_DLCR2 ( 2 * 2) /* Receive status */
#define NIC_DLCR3 ( 3 * 2) /* Receive masks */
#define NIC_DLCR4 ( 4 * 2) /* Transmit mode */
#define NIC_DLCR5 ( 5 * 2) /* Receive mode */
#define NIC_DLCR6 ( 6 * 2) /* Software reset */
#define NIC_DLCR7 ( 7 * 2) /* TDR (LSB) */
#define NIC_DLCR8 ( 8 * 2) /* Node ID0 */
#define NIC_DLCR9 ( 9 * 2) /* Node ID1 */
#define NIC_DLCR10 (10 * 2) /* Node ID2 */
#define NIC_DLCR11 (11 * 2) /* Node ID3 */
#define NIC_DLCR12 (12 * 2) /* Node ID4 */
#define NIC_DLCR13 (13 * 2) /* Node ID5 */
#define NIC_DLCR15 (15 * 2) /* TDR (MSB) */
#define NIC_BMPR0 (16 * 2) /* Buffer memory port (FIFO) */
#define NIC_BMPR2 (18 * 2) /* Packet length */
#define NIC_BMPR4 (20 * 2) /* DMA enable */
#define QNET_MAGIC 0x30 /* GAL magic */
/* DLCR0 - Transmit Status */
#define BUS_WRITE_ERROR 0x0101 /* Bus write error */
#define T_SIXTEEN_COL 0x0202 /* 16 collision */
#define T_COL 0x0404 /* Collision */
#define T_UNDERFLOW 0x0808 /* Underflow */
#define T_TMT_OK 0x8080 /* Transmit okay */
#define CLEAR_T_ERR 0x0f0f /* Clear transmit errors */
/* DLCR1 - Transmit Interrupt Masks */
#define INT_SIXTEEN_COL 0x0202 /* 16 Collision */
#define INT_TMT_OK 0x8080 /* Transmit okay */
#define CLEAR_T_MASK 0x0000 /* Clear transmit interrupt masks */
/* DLCR2 - Receive Status */
#define R_BUS_RD_ERR 0x4040 /* Bus read error */
#define R_PKT_RDY 0x8080 /* Packet ready */
#define CLEAR_R_ERR 0xcfcf /* Clear receive errors */
/* DLCR3 - Receive Interrupt Masks */
#define R_INT_OVR_FLO 0x0101 /* Receive buf overflow */
#define R_INT_CRC_ERR 0x0202 /* CRC error */
#define R_INT_ALG_ERR 0x0404 /* Alignment error */
#define R_INT_SRT_PKT 0x0808 /* Short packet */
#define R_INT_PKT_RDY 0x8080 /* Packet ready */
#define CLEAR_R_MASK 0x0000 /* Clear receive intr masks */
/* DLCR4 - Transmit Mode */
#define NO_LOOPBACK 0x0202 /* Loopback control */
/* DLCR5 - Receive Mode */
/* Normal mode: accept physical address, multicast group addresses
* which match the 1st three bytes and broadcast address.
*/
#define NORMAL_MODE 0x0101
#define PROMISCUOUS_MODE 0x0303 /* Accept all packets */
#define RM_BUF_EMP 0x4040 /* Buffer empty */
/* DLCR6 - Enable Data Link Controller */
#define DISABLE_DLC 0x8080 /* Disable data link controller */
#define ENABLE_DLC 0x0000 /* Enable data link controller */
/* DLCR8:DLCR13 - Node ID Registers */
#define QNET_HARDWARE_ADDRESS NIC_DLCR8
/* BMPR3:BMPR2 - Packet Length Registers (Write-only) */
#define TRANSMIT_START 0x0080
|
