path: root/sys/arch/hp300/dev/dnkbd.c

/*	$OpenBSD: dnkbd.c,v 1.9 2005/11/06 16:45:20 miod Exp $	*/

/*
 * Copyright (c) 2005, Miodrag Vallat
 * Copyright (c) 1997 Michael Smith.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*
 * Driver for the Apollo Domain keyboard and mouse.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/ioctl.h>
#include <sys/kernel.h>
#include <sys/timeout.h>

#include <machine/autoconf.h>
#include <machine/cpu.h>

#include <dev/wscons/wsconsio.h>
#include <dev/wscons/wskbdvar.h>
#include <dev/wscons/wsksymdef.h>
#include <dev/wscons/wsksymvar.h>
#ifdef WSDISPLAY_COMPAT_RAWKBD
#include <dev/wscons/wskbdraw.h>
#endif
#include "wsmouse.h"
#if NWSMOUSE > 0
#include <dev/wscons/wsmousevar.h>
#endif

#include <hp300/dev/apcireg.h>
#include <hp300/dev/apcivar.h>
#include <hp300/dev/dcareg.h>
#include <hp300/dev/dnkbdmap.h>
#include <hp300/dev/frodoreg.h>
#include <hp300/dev/frodovar.h>

#include "hilkbd.h"

/*
 * Keyboard key codes
 */

#define	DNKEY_REPEAT	0x7f
#define	DNKEY_RELEASE	0x80
#define	DNKEY_CHANNEL	0xff

/*
 * Channels
 */

#define	DNCHANNEL_RESET	0x00
#define	DNCHANNEL_KBD	0x01
#define	DNCHANNEL_MOUSE	0x02

/*
 * Keyboard modes
 */

#define	DNMODE_COOKED	0x00
#define	DNMODE_RAW	0x01

/*
 * Keyboard commands
 */

#define	DNCMD_PREFIX	0xff
#define	DNCMD_COOKED	DNMODE_COOKED
#define	DNCMD_RAW	DNMODE_RAW
#define	DNCMD_IDENT_1	0x12
#define	DNCMD_IDENT_2	0x21

/*
 * Bell commands
 */

#define	DNCMD_BELL	0x21
#define	DNCMD_BELL_ON	0x81
#define	DNCMD_BELL_OFF	0x82

/*
 * Mouse status
 */

#define	DNBUTTON_L	0x10
#define	DNBUTTON_R	0x20
#define	DNBUTTON_M	0x40

struct dnkbd_softc {
	struct device	sc_dev;
	struct isr	sc_isr;
	struct apciregs	*sc_regs;

	int		sc_flags;
#define	SF_ENABLED	0x01		/* keyboard enabled */
#define	SF_CONSOLE	0x02		/* keyboard is console */
#define	SF_POLLING	0x04		/* polling mode */
#define	SF_PLUGGED	0x08		/* keyboard has been seen plugged */
#define	SF_ATTACHED	0x10		/* subdevices have been attached */
#define	SF_MOUSE	0x20		/* mouse enabled */
#define	SF_BELL		0x40		/* bell is active */
#define	SF_BELL_TMO	0x80		/* bell stop timeout is scheduled */

	u_int		sc_identlen;
#define	MAX_IDENTLEN	32
	char		sc_ident[MAX_IDENTLEN];

	enum { STATE_KEYBOARD, STATE_MOUSE, STATE_CHANNEL, STATE_ECHO }
			sc_state, sc_prevstate;
	u_int		sc_echolen;

	u_int8_t	sc_mousepkt[3];	/* mouse packet being constructed */
	u_int		sc_mousepos;	/* index in above */

	struct timeout	sc_bellstop_tmo;

	struct device	*sc_wskbddev;
#if NWSMOUSE > 0
	struct device	*sc_wsmousedev;
#endif

#ifdef WSDISPLAY_COMPAT_RAWKBD
	int		sc_rawkbd;
	int		sc_nrep;
	char		sc_rep[2];	/* at most, one key */
	struct timeout	sc_rawrepeat_ch;
#define	REP_DELAY1	400
#define	REP_DELAYN	100
#endif
};

int	dnkbd_match(struct device *, void *, void *);
void	dnkbd_attach(struct device *, struct device *, void *);

struct cfdriver dnkbd_cd = {
	NULL, "dnkbd", DV_DULL
};

struct cfattach dnkbd_ca = {
	sizeof(struct dnkbd_softc), dnkbd_match, dnkbd_attach
};

int	dnkbd_enable(void *, int);
void	dnkbd_set_leds(void *, int);
int	dnkbd_ioctl(void *, u_long, caddr_t, int, struct proc *);

const struct wskbd_accessops dnkbd_accessops = {
	dnkbd_enable,
	dnkbd_set_leds,
	dnkbd_ioctl
};

#if NWSMOUSE > 0
int	dnmouse_enable(void *);
int	dnmouse_ioctl(void *, u_long, caddr_t, int, struct proc *);
void	dnmouse_disable(void *);

const struct wsmouse_accessops dnmouse_accessops = {
	dnmouse_enable,
	dnmouse_ioctl,
	dnmouse_disable
};
#endif

void	dnkbd_bell(void *, u_int, u_int, u_int);
void	dnkbd_cngetc(void *, u_int *, int *);
void	dnkbd_cnpollc(void *, int);

const struct wskbd_consops dnkbd_consops = {
	dnkbd_cngetc,
	dnkbd_cnpollc,
	dnkbd_bell
};

struct wskbd_mapdata dnkbd_keymapdata = {
	dnkbd_keydesctab,
	KB_US
};

typedef enum { EVENT_NONE, EVENT_KEYBOARD, EVENT_MOUSE } dnevent;

void	dnevent_kbd(struct dnkbd_softc *, int);
void	dnevent_mouse(struct dnkbd_softc *, u_int8_t *);
void	dnkbd_attach_subdevices(struct dnkbd_softc *);
void	dnkbd_bellstop(void *);
void	dnkbd_decode(int, u_int *, int *);
int	dnkbd_init(struct apciregs *);
dnevent	dnkbd_input(struct dnkbd_softc *, int);
int	dnkbd_intr(void *);
int	dnkbd_pollin(struct apciregs *, u_int);
int	dnkbd_pollout(struct apciregs *, int);
int	dnkbd_probe(struct dnkbd_softc *);
void	dnkbd_rawrepeat(void *);
int	dnkbd_send(struct apciregs *, const u_int8_t *, size_t);
int	dnsubmatch_kbd(struct device *, void *, void *);
int	dnsubmatch_mouse(struct device *, void *, void *);

int
dnkbd_match(struct device *parent, void *match, void *aux)
{
	struct frodo_attach_args *fa = aux;

	if (strcmp(fa->fa_name, dnkbd_cd.cd_name) != 0)
		return (0);

	/* only attach to the first frodo port */
	return (fa->fa_offset == FRODO_APCI_OFFSET(0));
}

void
dnkbd_attach(struct device *parent, struct device *self, void *aux)
{
	struct dnkbd_softc *sc = (struct dnkbd_softc *)self;
	struct frodo_attach_args *fa = aux;

	printf(": ");

	sc->sc_regs = (struct apciregs *)IIOV(FRODO_BASE + fa->fa_offset);

	timeout_set(&sc->sc_bellstop_tmo, dnkbd_bellstop, sc);
#ifdef WSDISPLAY_COMPAT_RAWKBD
	timeout_set(&sc->sc_rawrepeat_ch, dnkbd_rawrepeat, sc);
#endif

	/* reset the port */
	apciinit(sc->sc_regs, 1200, CFCR_8BITS | CFCR_PEVEN | CFCR_PENAB);

	sc->sc_isr.isr_func = dnkbd_intr;
	sc->sc_isr.isr_arg = sc;
	sc->sc_isr.isr_priority = IPL_TTY;
	frodo_intr_establish(parent, fa->fa_line, &sc->sc_isr, self->dv_xname);

	/* probe for keyboard */
	if (dnkbd_probe(sc) != 0) {
		printf("no keyboard\n");
		return;
	}

	dnkbd_attach_subdevices(sc);
}

void
dnkbd_attach_subdevices(struct dnkbd_softc *sc)
{
	struct wskbddev_attach_args ka;
#if NWSMOUSE > 0
	struct wsmousedev_attach_args ma;
#endif
#if NHILKBD > 0
	extern int hil_is_console;
#endif

	/*
	 * If both hilkbd and dnkbd are configured, prefer the Domain
	 * keyboard as console (if we are here, we know the keyboard is
	 * plugged). But if it's a late hotplug, the hil code will have
	 * claimed the console keyboard, so don't claim it now.
	 * Unfortunately, the hil code will claim the console keyboard
	 * even if no HIL keyboard is connected...
	 */
#if NHILKBD > 0
	if (hil_is_console == -1) {
		ka.console = 1;
		hil_is_console = 0;
	} else
		ka.console = 0;
#else
	ka.console = 1;
#endif
	ka.keymap = &dnkbd_keymapdata;
	ka.accessops = &dnkbd_accessops;
	ka.accesscookie = sc;

	if (ka.console) {
		sc->sc_flags = SF_PLUGGED | SF_CONSOLE | SF_ENABLED;
		wskbd_cnattach(&dnkbd_consops, sc, &dnkbd_keymapdata);
	} else {
		sc->sc_flags = SF_PLUGGED;
	}

	sc->sc_wskbddev = config_found_sm(&sc->sc_dev, &ka, wskbddevprint,
	    dnsubmatch_kbd);

#if NWSMOUSE > 0
	ma.accessops = &dnmouse_accessops;
	ma.accesscookie = sc;

	sc->sc_wsmousedev = config_found_sm(&sc->sc_dev, &ma, wsmousedevprint,
	    dnsubmatch_mouse);
#endif

	SET(sc->sc_flags, SF_ATTACHED);
}

int
dnsubmatch_kbd(struct device *parent, void *match, void *aux)
{
	struct cfdata *cf = match;
	extern struct cfdriver wskbd_cd;

	if (strcmp(cf->cf_driver->cd_name, wskbd_cd.cd_name) != 0)
		return (0);

	return ((*cf->cf_attach->ca_match)(parent, cf, aux));
}

#if NWSMOUSE > 0
int
dnsubmatch_mouse(struct device *parent, void *match, void *aux)
{
	struct cfdata *cf = match;
	extern struct cfdriver wsmouse_cd;

	if (strcmp(cf->cf_driver->cd_name, wsmouse_cd.cd_name) != 0)
		return (0);

	return ((*cf->cf_attach->ca_match)(parent, cf, aux));
}
#endif

int
dnkbd_probe(struct dnkbd_softc *sc)
{
	int dat, rc, flags;
	u_int8_t cmdbuf[2];
	char rspbuf[MAX_IDENTLEN], *word, *end;
	u_int i;
	int s;

	s = spltty();
	flags = sc->sc_flags;
	SET(sc->sc_flags, SF_POLLING);
	sc->sc_state = STATE_CHANNEL;
	splx(s);

	/*
	 * Switch keyboard to raw mode.
	 */
	cmdbuf[0] = DNCMD_RAW;
	rc = dnkbd_send(sc->sc_regs, cmdbuf, 1);
	if (rc != 0)
		goto out;

	/*
	 * Send the identify command.
	 */
	cmdbuf[0] = DNCMD_IDENT_1;
	cmdbuf[1] = DNCMD_IDENT_2;
	rc = dnkbd_send(sc->sc_regs, cmdbuf, 2);
	if (rc != 0)
		goto out;

	for (i = 0; ; i++) {
		dat = dnkbd_pollin(sc->sc_regs, 10000);
		if (dat == -1)
			break;

		if (i < sizeof(rspbuf))
			rspbuf[i] = dat;
	}

	if (i > sizeof(rspbuf) || i == 0) {
		printf("%s: unexpected identify string length %d\n",
		    sc->sc_dev.dv_xname, i);
		rc = ENXIO;
		goto out;
	}

	/*
	 * Make sure the identification string is NULL terminated
	 * (overwriting the keyboard mode byte if necessary).
	 */
	i--;
	if (rspbuf[i] != 0)
		rspbuf[i] = 0;

	/*
	 * Now display the identification strings, if it changed.
	 */
	if (i != sc->sc_identlen || bcmp(rspbuf, sc->sc_ident, i) != 0) {
		sc->sc_identlen = i;
		bcopy(rspbuf, sc->sc_ident, i);

		if (cold == 0)
			printf("%s: ", sc->sc_dev.dv_xname);
		printf("model ");
		word = rspbuf;
		for (i = 0; i < 3; i++) {
			end = strchr(word, '\r');
			if (end == NULL)
				break;
			*end++ = '\0';
			printf("<%s> ", word);
			word = end;
		}
		printf("\n");
	}

	/*
	 * Ready to work, the default channel is the keyboard.
	 */
	sc->sc_state = STATE_KEYBOARD;

out:
	s = spltty();
	sc->sc_flags = flags;
	splx(s);

	return (rc);
}

/*
 * State machine.
 *
 * In raw mode, the keyboard may feed us the following sequences:
 * - on the keyboard channel:
 *   + a raw key code, in the range 0x01-0x7e, or'ed with 0x80 if key release.
 *   + the key repeat sequence 0x7f.
 * - on the mouse channel:
 *   + a 3 byte mouse sequence (buttons state, dx move, dy move).
 * - at any time:
 *   + a 2 byte channel sequence (0xff followed by the channel number) telling
 *     us which device the following input will come from.
 *   + if we get 0xff but an invalid channel number, this is a command echo.
 *     Currently we only handle this for bell commands, which size are known.
 *     Other commands are issued through dnkbd_send() which ``eats'' the echo.
 *
 * Older keyboards reset the channel to the keyboard (by sending ff 01) after
 * every mouse packet.
 */

dnevent
dnkbd_input(struct dnkbd_softc *sc, int dat)
{
	dnevent event = EVENT_NONE;

	switch (sc->sc_state) {
	case STATE_KEYBOARD:
		switch (dat) {
		case DNKEY_REPEAT:
			/*
			 * We ignore event repeats, as wskbd does its own
			 * soft repeat processing.
			 */
			break;
		case DNKEY_CHANNEL:
			sc->sc_prevstate = sc->sc_state;
			sc->sc_state = STATE_CHANNEL;
			break;
		default:
			event = EVENT_KEYBOARD;
			break;
		}
		break;

	case STATE_MOUSE:
		if (dat == DNKEY_CHANNEL && sc->sc_mousepos == 0) {
			sc->sc_prevstate = sc->sc_state;
			sc->sc_state = STATE_CHANNEL;
		} else {
			sc->sc_mousepkt[sc->sc_mousepos++] = dat;
			if (sc->sc_mousepos == sizeof(sc->sc_mousepkt)) {
				sc->sc_mousepos = 0;
				event = EVENT_MOUSE;
			}
		}
		break;

	case STATE_CHANNEL:
		switch (dat) {
		case DNKEY_CHANNEL:
			/*
			 * During hotplug, we might get spurious 0xff bytes.
			 * Ignore them.
			 */
			break;
		case DNCHANNEL_RESET:
			/*
			 * Identify the keyboard again. This will switch it to
			 * raw mode again. If this fails, we'll consider the
			 * keyboard as unplugged (to ignore further events until
			 * a successfull reset).
			 */
			if (dnkbd_probe(sc) == 0) {
				/*
				 * We need to attach wskbd and wsmouse children
				 * if this is a live first plug.
				 */
				if (!ISSET(sc->sc_flags, SF_ATTACHED))
					dnkbd_attach_subdevices(sc);
				SET(sc->sc_flags, SF_PLUGGED);
			} else {
				CLR(sc->sc_flags, SF_PLUGGED);
			}

			sc->sc_state = STATE_KEYBOARD;
			break;
		case DNCHANNEL_KBD:
			sc->sc_state = STATE_KEYBOARD;
			break;
		case DNCHANNEL_MOUSE:
			sc->sc_state = STATE_MOUSE;
			sc->sc_mousepos = 0;	/* just in case */
			break;
		case DNCMD_BELL:
			/*
			 * We are getting a bell command echoed to us.
			 * Ignore it.
			 */
			sc->sc_state = STATE_ECHO;
			sc->sc_echolen = 1;	/* one byte to follow */
			break;
		default:
			printf("%s: unexpected channel byte %02x\n",
			    sc->sc_dev.dv_xname, dat);
			break;
		}
		break;

	case STATE_ECHO:
		if (--sc->sc_echolen == 0) {
			/* get back to the state we were in before the echo */
			sc->sc_state = sc->sc_prevstate;
		}
		break;
	}

	return (event);
}

/*
 * Event breakers.
 */

void
dnkbd_decode(int keycode, u_int *type, int *key)
{
	*type = (keycode & DNKEY_RELEASE) ?
	    WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN;
	*key = (keycode & ~DNKEY_RELEASE);
}

void
dnevent_kbd(struct dnkbd_softc *sc, int dat)
{
	u_int type;
	int key;
	int s;

	if (!ISSET(sc->sc_flags, SF_PLUGGED))
		return;

	if (sc->sc_wskbddev == NULL)
		return;

	if (!ISSET(sc->sc_flags, SF_ENABLED))
		return;

	dnkbd_decode(dat, &type, &key);

#ifdef WSDISPLAY_COMPAT_RAWKBD
	if (sc->sc_rawkbd) {
		u_char cbuf[2];
		int c, j = 0;

		c = dnkbd_raw[key];
		if (c != RAWKEY_Null) {
			/* fake extended scancode if necessary */
			if (c & 0x80)
				cbuf[j++] = 0xe0;
			cbuf[j] = c & 0x7f;
			if (type == WSCONS_EVENT_KEY_UP)
				cbuf[j] |= 0x80;
			else {
				/* remember pressed key for autorepeat */
				bcopy(cbuf, sc->sc_rep, sizeof(sc->sc_rep));
			}
			j++;
		}

		if (j != 0) {
			s = spltty();
			wskbd_rawinput(sc->sc_wskbddev, cbuf, j);
			splx(s);
			timeout_del(&sc->sc_rawrepeat_ch);
			sc->sc_nrep = j;
			timeout_add(&sc->sc_rawrepeat_ch,
			    (hz * REP_DELAY1) / 1000);
		}
	} else
#endif
	{
		s = spltty();
		wskbd_input(sc->sc_wskbddev, type, key);
		splx(s);
	}
}

#ifdef WSDISPLAY_COMPAT_RAWKBD
void
dnkbd_rawrepeat(void *v)
{
	struct dnkbd_softc *sc = v;
	int s;

	s = spltty();
	wskbd_rawinput(sc->sc_wskbddev, sc->sc_rep, sc->sc_nrep);
	splx(s);

	timeout_add(&sc->sc_rawrepeat_ch, (hz * REP_DELAYN) / 1000);
}
#endif

#if NWSMOUSE > 0
void
dnevent_mouse(struct dnkbd_softc *sc, u_int8_t *dat)
{
	if (!ISSET(sc->sc_flags, SF_PLUGGED))
		return;

	if (sc->sc_wsmousedev == NULL)
		return;

	if (!ISSET(sc->sc_flags, SF_MOUSE))
		return;

	/*
	 * First byte is button status. It has the 0x80 bit always set, and
	 * the next 3 bits are *cleared* when the mouse buttons are pressed.
	 */
#ifdef DEBUG
	if (!ISSET(*dat, 0x80)) {
		printf("%s: incorrect mouse packet %02x %02x %02x\n",
		    sc->sc_dev.dv_xname, dat[0], dat[1], dat[2]);
		return;
	}
#endif
	
	wsmouse_input(sc->sc_wsmousedev,
	    (~dat[0] & (DNBUTTON_L | DNBUTTON_M | DNBUTTON_R)) >> 4,
	    (int8_t)dat[1], (int8_t)dat[2], 0, WSMOUSE_INPUT_DELTA);
}
#endif

/*
 * Low-level communication routines.
 */

int
dnkbd_pollin(struct apciregs *apci, u_int tries)
{
	u_int cnt;

	for (cnt = tries; cnt != 0; cnt--) {
		if (apci->ap_lsr & LSR_RXRDY)
			break;
		DELAY(10);
	}

	if (cnt == 0)
		return (-1);
	else
		return ((int)apci->ap_data);
}

int
dnkbd_pollout(struct apciregs *apci, int dat)
{
	u_int cnt;

	for (cnt = 10000; cnt != 0; cnt--) {
		if (apci->ap_lsr & LSR_TXRDY)
			break;
		DELAY(10);
	}
	if (cnt == 0)
		return (EBUSY);
	else {
		apci->ap_data = dat;
		return (0);
	}
}

int
dnkbd_send(struct apciregs *apci, const u_int8_t *cmdbuf, size_t cmdlen)
{
	int cnt, rc, dat;
	u_int cmdpos;

	/* drain rxfifo */
	for (cnt = 10; cnt != 0; cnt--) {
		if (dnkbd_pollin(apci, 10) == -1)
			break;
	}
	if (cnt == 0)
		return (EBUSY);

	/* send command escape */
	if ((rc = dnkbd_pollout(apci, DNCMD_PREFIX)) != 0)
		return (rc);

	/* send command buffer */
	for (cmdpos = 0; cmdpos < cmdlen; cmdpos++) {
		if ((rc = dnkbd_pollout(apci, cmdbuf[cmdpos])) != 0)
			return (rc);
	}

	/* wait for command echo */
	do {
		dat = dnkbd_pollin(apci, 10000);
		if (dat == -1)
			return (EIO);
	} while (dat != DNCMD_PREFIX);

	for (cmdpos = 0; cmdpos < cmdlen; cmdpos++) {
		dat = dnkbd_pollin(apci, 10000);
		if (dat != cmdbuf[cmdpos])
			return (EIO);
	}

	return (0);
}

int
dnkbd_intr(void *v)
{
	struct dnkbd_softc *sc = v;
	struct apciregs *apci = sc->sc_regs;
	u_int8_t iir, lsr, c;
	int claimed = 0;

	for (;;) {
		iir = apci->ap_iir;

		switch (iir & IIR_IMASK) {
		case IIR_RLS:
			/*
			 * Line status change. This should never happen,
			 * so silently ack the interrupt.
			 */
			c = apci->ap_lsr;
			break;

		case IIR_RXRDY:
		case IIR_RXTOUT:
			/*
			 * Data available. We process it byte by byte,
			 * unless we are doing polling work...
			 */
			if (ISSET(sc->sc_flags, SF_POLLING)) {
				return (1);
			}

			for (;;) {
				c = apci->ap_data;
				switch (dnkbd_input(sc, c)) {
				case EVENT_KEYBOARD:
					dnevent_kbd(sc, c);
					break;
#if NWSMOUSE > 0
				case EVENT_MOUSE:
					dnevent_mouse(sc, sc->sc_mousepkt);
					break;
#endif
				default:	/* appease gcc */
					break;
				}
				lsr = apci->ap_lsr & LSR_RCV_MASK;
				if (lsr == 0)
					break;
				else if (lsr != LSR_RXRDY) {
					/* ignore error */
					break;
				}
			}
			break;

		case IIR_TXRDY:
			/*
			 * Transmit available. Since we do all our commands
			 * in polling mode, we do not need to do anything here.
			 */
			break;

		default:
			if (iir & IIR_NOPEND)
				return (claimed);
			/* FALLTHROUGH */

		case IIR_MLSC:
			/*
			 * Modem status change. This should never happen,
			 * so silently ack the interrupt.
			 */
			c = apci->ap_msr;
			break;
		}

		claimed = 1;
	}
}

/*
 * Wskbd callbacks
 */

int
dnkbd_enable(void *v, int on)
{
	struct dnkbd_softc *sc = v;

	if (on) {
		if (ISSET(sc->sc_flags, SF_ENABLED))
			return (EBUSY);
		SET(sc->sc_flags, SF_ENABLED);
	} else {
		if (ISSET(sc->sc_flags, SF_CONSOLE))
			return (EBUSY);
		CLR(sc->sc_flags, SF_ENABLED);
	}

	return (0);
}

void
dnkbd_set_leds(void *v, int leds)
{
	/*
	 * Not supported. There is only one LED on this keyboard, and
	 * is hardware tied to the caps lock key.
	 */
}

int
dnkbd_ioctl(void *v, u_long cmd, caddr_t data, int flag, struct proc *p)
{
#ifdef WSDISPLAY_COMPAT_RAWKBD
	struct dnkbd_softc *sc = v;
#endif

	switch (cmd) {
	case WSKBDIO_GTYPE:
		*(int *)data = WSKBD_TYPE_DOMAIN;
		return (0);
	case WSKBDIO_SETLEDS:
		return (ENXIO);
	case WSKBDIO_GETLEDS:
		*(int *)data = 0;
		return (0);
	case WSKBDIO_COMPLEXBELL:
#define	d	((struct wskbd_bell_data *)data)
		dnkbd_bell(v, d->period, d->pitch, d->volume);
#undef d
		return (0);
#ifdef WSDISPLAY_COMPAT_RAWKBD
	case WSKBDIO_SETMODE:
		sc->sc_rawkbd = *(int *)data == WSKBD_RAW;
		timeout_del(&sc->sc_rawrepeat_ch);
		return (0);
#endif
	}

	return (-1);
}

#if NWSMOUSE > 0
/*
 * Wsmouse callbacks
 */

int
dnmouse_enable(void *v)
{
	struct dnkbd_softc *sc = v;

	if (ISSET(sc->sc_flags, SF_MOUSE))
		return (EBUSY);
	SET(sc->sc_flags, SF_MOUSE);

	return (0);
}

int
dnmouse_ioctl(void *v, u_long cmd, caddr_t data, int flag, struct proc *p)
{
#if 0
	struct dnkbd_softc *sc = v;
#endif

	switch (cmd) {
	case WSMOUSEIO_GTYPE:
		*(int *)data = WSMOUSE_TYPE_DOMAIN;
		return (0);
	}

	return (-1);
}

void
dnmouse_disable(void *v)
{
	struct dnkbd_softc *sc = v;

	CLR(sc->sc_flags, SF_MOUSE);
}
#endif

/*
 * Console support
 */

void
dnkbd_cngetc(void *v, u_int *type, int *data)
{
	struct dnkbd_softc *sc = v;
	int s;
	int dat;

	for (;;) {
		s = splhigh();
		dat = dnkbd_pollin(sc->sc_regs, 10000);
		if (dat != -1) {
			if (dnkbd_input(sc, dat) == EVENT_KEYBOARD) {
				splx(s);
				break;
			}
		}
		splx(s);
	}

	dnkbd_decode(dat, type, data);
}

void
dnkbd_cnpollc(void *v, int on)
{
	struct dnkbd_softc *sc = v;

	if (on)
		SET(sc->sc_flags, SF_POLLING);
	else
		CLR(sc->sc_flags, SF_POLLING);
}

/*
 * Bell routines.
 */
void
dnkbd_bell(void *v, u_int period, u_int pitch, u_int volume)
{
	struct dnkbd_softc *sc = v;
	int ticks, s;

	s = spltty();

	if (pitch == 0 || period == 0 || volume == 0) {
		if (ISSET(sc->sc_flags, SF_BELL_TMO)) {
			timeout_del(&sc->sc_bellstop_tmo);
			dnkbd_bellstop(v);
		}
	} else {
		ticks = (period * hz) / 1000;
		if (ticks <= 0)
			ticks = 1;

		if (!ISSET(sc->sc_flags, SF_BELL)) {
			dnkbd_pollout(sc->sc_regs, DNCMD_PREFIX);
			dnkbd_pollout(sc->sc_regs, DNCMD_BELL);
			dnkbd_pollout(sc->sc_regs, DNCMD_BELL_ON);
			SET(sc->sc_flags, SF_BELL);
		}

		if (ISSET(sc->sc_flags, SF_BELL_TMO))
			timeout_del(&sc->sc_bellstop_tmo);
		timeout_add(&sc->sc_bellstop_tmo, ticks);
		SET(sc->sc_flags, SF_BELL_TMO);
	}

	splx(s);
}

void
dnkbd_bellstop(void *v)
{
	struct dnkbd_softc *sc = v;
	int s;

	s = spltty();

	dnkbd_pollout(sc->sc_regs, DNCMD_PREFIX);
	dnkbd_pollout(sc->sc_regs, DNCMD_BELL);
	dnkbd_pollout(sc->sc_regs, DNCMD_BELL_OFF);
	CLR(sc->sc_flags, SF_BELL);
	CLR(sc->sc_flags, SF_BELL_TMO);

	splx(s);
}