path: root/sys/arch/i386/stand/boot/boot.8

.\"	$OpenBSD: boot.8,v 1.28 2001/09/03 11:34:17 deraadt Exp $
.\"
.\" Copyright (c) 1997-2001 Michael Shalayeff
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"      This product includes software developed by Michael Shalayeff.
.\" 4. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR OR HIS RELATIVES BE LIABLE FOR ANY DIRECT,
.\" INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
.\" SERVICES; LOSS OF MIND, USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
.\" THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\"
.Dd September 1, 1997
.Dt BOOT 8 i386
.Os
.Sh NAME
.Nm boot ,
.Nm boot.conf
.Nd
i386-specific second-stage bootstrap
.Sh DESCRIPTION
The main purpose of this program is to load the system kernel while dealing
with the downfalls of the PC BIOS architecture.
.Pp
As described in
.Xr boot_i386 8 ,
this program is loaded by the
.Xr biosboot 8
primary bootstrap loader and provides a convenient way to load the kernel.
This program acts as an enhanced boot monitor for PC systems, providing
common interface for the kernel to start from.
.Pp
Basic operations include:
.Pp
.Bl -bullet -compact
.It
Detecting and switching between multiple consoles.
.It
Loading kernels from any device supported by your system BIOS.
.It
Loading kernels compressed by
.Xr gzip 1 .
.It
Passing system parameters queried from the BIOS to the kernel.
.It
Providing an interactive command line.
.El
.Pp
The sequence of its operation is as follows: initialization,
parsing the configuration file, then an interactive command line.
While at the command line you have 5 seconds to type any commands, if needed.
If time expires, the kernel will be loaded according to
the current variable settings (see the
.Nm set
command).
Each time a kernel load fails, the timeout is increased by one second.
The sequence of
.Nm
operations is as follows:
.Bl -enum
.It
Set up a protected mode environment which catches and reports processor
exceptions and provides a simple protected-mode BIOS interface.
.It
Probe for console devices, which includes the (default) PC VGA+Keyboard
console
.Pq Li pc0
and up to four serial consoles
.Pf ( Li com0
through
.Li com3 )
connected to the serial ports.
Display messages to the default console about the devices found.
.It
Detect memory.
Conventional memory is detected by querying the BIOS.
Extended memory is detected by probing page-by-page through the address
space, rather than asking the BIOS; many BIOS's cannot report larger than
64M of memory.
All memory found is reported to the default console device.
.It
Probe for APM support in the BIOS.
Display a message if support is present.
.It
If the file
.Pa /etc/boot.conf
exists on the filesystem
.Nm
was loaded from, open and parse it.
This file may contain any commands
.Nm
accepts at the interactive prompt.
Though default settings usually suffice, they can be changed here.
.It
The header line
.Pp
.Dl >> OpenBSD/i386 BOOT [x.xx]
.Pp
is displayed to the active console, where
.Ar x.xx
is the version number of the
.Nm
program, followed by the
.Pp
.Dl boot>
.Pp
prompt, which means you are in the interactive mode and may enter commands.
If you do not,
.Nm
will proceed to loading the kernel with the current parameters after the
timeout period has expired.
.El
.Sh COMMANDS
The following commands are accepted at the
.Nm
prompt:
.Bl -tag -width shorten
.It boot Op Ar image Op Fl acds
Boots the kernel image specified by
.Ar image
with any options given.
Image specification consists of a pair
.Em device : filename ,
either or both can be omitted (':' is not needed if both are omitted),
in which case values from
.Nm
variables will be used.
.Bl -tag -width _a_
.It Fl a
Causes the kernel to ask for the
.Nm root
device to use.
.It Fl c
Causes the kernel to go into
.Xr boot_config 8
before performing
.Xr autoconf 4
procedures.
.It Fl d
Causes the kernel to drop into
.Xr ddb 4
at the earliest convinient point.
.It Fl s
Causes the kernel to boot single-user.
.El
.It echo Op Ar args
Displays
.Ar args
on the console device.
.It help
Prints a list of available commands and machine dependent
commands, if any.
.It machine Op Ar command
Issues machine-dependent commands.
These are defined for i386 architecture:
.Bl -tag -width diskinfo
.It Nm diskinfo
Prints a list of hard disks installed on your system including:
BIOS device number, and the BIOS geometry.
.It Nm memory
If used without any arguments this command will print out
the memory configuration as determined through BIOS routines.
Otherwise the arguments would specify the expressions to modify the
memory configuration.
The expression would have a form of:
.Pp
.Dl [+-]<size>@<address>
.Pp
Meaning to add(+) or exempt(-) the specified by the
.Ar <size>
amount of memory at the location specified by the
.Ar <address>
argument.
Both size and base address could be specified as octal,
decimal, or hexadecimal numbers, as accepted by the
.Xr strtoul 3
routine.
Memory segments are not required to be adjacent to each other,
the only requirement is that there is real physical memory under
the range added.
For example:
.Bd -unfilled -offset indent
machine mem +0x2000000@0x1000000
.Ed
.Pp
would add 32M of memory right after the first 16M.
The other useful command would be to withdraw a range
of memory from OS usage (might be wrongfully reported as
useful by the BIOS).
.Bd -unfilled -offset indent
machine mem -0x100000@0xf00000
.Ed
.Pp
which effectively excludes 15-16M range from the map of useful memory.
.It Nm regs
Prints contents of processor registers if compiled with
.Em DEBUG .
.El
.It ls Op Ar directory
Prints contents of the specified
.Ar directory
in long format including: attributes and file type, owner, group,
size, filename.
.It reboot
Reboots the machine by initiating a warm boot procedure.
.It set Op Ar varname Op Ar value
If invoked without arguments, prints a list of variables and their values.
If only
.Ar varname
is specified, displays contents of that variable.
If
.Ar varname
and
.Ar value
are both specified, sets that variable to the given value.
Variables include:
.Pp
.Bl -tag -compact -width boothow
.It Nm addr
Address at which to load the kernel.
.It Nm debug
Debug flag if
.Nm
was compiled with DEBUG defined.
.It Nm device
Boot device name (i.e.,
.Li fd0a ,
.Li sd0a ) .
.It Nm howto
Options to pass to the loaded kernel.
.It Nm image
File name containing the kernel image.
.It Nm timeout
Number of seconds boot will wait for human intervention before
booting the default kernel image.
.It Nm tty
Active console device name (i.e.,
.Li com0 ,
.Li com1 ,
.Li pc0 ) .
.El
.It stty Op Ar device Op Ar speed
Displays or sets the
.Ar speed
for a console
.Ar device .
If changing the baudrate for the currently active console,
.Nm
offers you five seconds of grace time before committing the change
to allow you to change your terminal's speed to match.
If changing speed
.Em not
for the active console, the baudrate is set for the
.Em next
time you switch to a serial console.
The baudrate value is not used for the
.Li pc0
console.
.Pp
The default baudrate is 9600bps.
.It time
Displays system time and date.
.El
.Sh EXAMPLES
.Li boot> boot
.Pp
Boot the default kernel.
.Pp
.Li # echo \&"boot\&" > /etc/boot.conf
.Pp
Remove the 5 second pause at boot-time permanently, causing
.Nm
to load the kernel immediately without prompting.
.Pp
.Li boot> set tty com0
.Pp
Use serial console.
A null modem cable should connect the specified serial port to a terminal.
Useful for debugging.
.Pp
.Li # echo \&"set tty com0\&" > /etc/boot.conf
.Pp
Invoke the serial console at every boot.
.Pp
.Li boot> boot wd1a:/bsd -c
.Pp
Boot the kernel named
.Pa /bsd
from the second IDE disk in
.Dq User Kernel Configuration
mode (see
.Xr config 8 ) .
This mechanism allows for the explicit enabling and disabling of devices
during the current boot sequence, as well as the modification
of device parameters.
Once booted, such changes can be made permanent by using
.Xr config 8 Ns 's
.Fl e
option.
.Sh FILES
.Bl -tag -width /usr/mdec/biosbootxx -compact
.It Pa /usr/mdec/biosboot
first stage bootstrap
.It Pa /boot
system bootstrap
.It Pa /etc/boot.conf
system bootstrap's startup file
.It Pa /bsd
kernel image
.El
.Sh SEE ALSO
.Xr gzip 1 ,
.Xr autoconf 4 ,
.Xr ddb 4 ,
.Xr boot_config 8 ,
.Xr boot_i386 8 ,
.Xr fdisk 8 ,
.Xr installboot 8 ,
.Xr reboot 8
.Pp
RFC 1950 describes the zlib library interface.
.Pp
The official home page for the version of zlib used in this
operating system see http://quest.jpl.nasa.gov/zlib/.
.Sh HISTORY
This program was written by Michael Shalayeff for
.Ox 2.1 .