path: root/sys/arch/m68k/060sp/isp.s

#
# $OpenBSD: isp.s,v 1.5 2004/01/09 21:16:06 deraadt Exp $
# $NetBSD: isp.s,v 1.2 1996/05/15 19:48:48 is Exp $
#

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
# M68000 Hi-Performance Microprocessor Division
# M68060 Software Package Production Release 
# 
# M68060 Software Package Copyright (C) 1993, 1994, 1995, 1996 Motorola Inc.
# All rights reserved.
# 
# THE SOFTWARE is provided on an "AS IS" basis and without warranty.
# To the maximum extent permitted by applicable law,
# MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
# INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
# FOR A PARTICULAR PURPOSE and any warranty against infringement with
# regard to the SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF)
# and any accompanying written materials. 
# 
# To the maximum extent permitted by applicable law,
# IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
# BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
# ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
# 
# Motorola assumes no responsibility for the maintenance and support
# of the SOFTWARE.  
# 
# You are hereby granted a copyright license to use, modify, and distribute the
# SOFTWARE so long as this entire notice is retained without alteration
# in any modified and/or redistributed versions, and that such modified
# versions are clearly identified as such.
# No licenses are granted by implication, estoppel or otherwise under any
# patents or trademarks of Motorola, Inc.
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

#
# ireal.s:
#	This file is appended to the top of the 060ISP package
# and contains the entry points into the package. The user, in
# effect, branches to one of the branch table entries located
# after _060ISP_TABLE.
#	Also, subroutine stubs exist in this file (_isp_done for
# example) that are referenced by the ISP package itself in order
# to call a given routine. The stub routine actually performs the
# callout. The ISP code does a "bsr" to the stub routine. This
# extra layer of hierarchy adds a slight performance penalty but
# it makes the ISP code easier to read and more mainatinable.
#

set	_off_chk,	0x00
set	_off_divbyzero,	0x04
set	_off_trace,	0x08
set	_off_access,	0x0c
set	_off_done,	0x10

set	_off_cas,	0x14
set	_off_cas2,	0x18
set	_off_lock,	0x1c
set	_off_unlock,	0x20

set	_off_imr,	0x40
set	_off_dmr,	0x44
set	_off_dmw,	0x48
set	_off_irw,	0x4c
set	_off_irl,	0x50
set	_off_drb,	0x54
set	_off_drw,	0x58
set	_off_drl,	0x5c
set	_off_dwb,	0x60
set	_off_dww,	0x64
set	_off_dwl,	0x68

_060ISP_TABLE:

# Here's the table of ENTRY POINTS for those linking the package.
	bra.l		_isp_unimp
	short		0x0000

	bra.l		_isp_cas
	short		0x0000

	bra.l		_isp_cas2
	short		0x0000

	bra.l		_isp_cas_finish
	short		0x0000

	bra.l		_isp_cas2_finish
	short		0x0000

	bra.l		_isp_cas_inrange
	short		0x0000

	bra.l		_isp_cas_terminate
	short		0x0000

	bra.l		_isp_cas_restart
	short		0x0000

	space		64

#############################################################

	global		_real_chk
_real_chk:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_chk,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_real_divbyzero
_real_divbyzero:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_divbyzero,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_real_trace
_real_trace:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_trace,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_real_access
_real_access:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_access,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_isp_done
_isp_done:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_done,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

#######################################

	global		_real_cas
_real_cas:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_cas,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_real_cas2
_real_cas2:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_cas2,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_real_lock_page
_real_lock_page:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_lock,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_real_unlock_page
_real_unlock_page:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_unlock,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

#######################################

	global		_imem_read
_imem_read:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_imr,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_read
_dmem_read:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_dmr,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_write
_dmem_write:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_dmw,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_imem_read_word
_imem_read_word:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_irw,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_imem_read_long
_imem_read_long:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_irl,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_read_byte
_dmem_read_byte:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_drb,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_read_word
_dmem_read_word:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_drw,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_read_long
_dmem_read_long:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_drl,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_write_byte
_dmem_write_byte:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_dwb,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_write_word
_dmem_write_word:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_dww,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

	global		_dmem_write_long
_dmem_write_long:
	mov.l		%d0,-(%sp)
	mov.l		(_060ISP_TABLE-0x80+_off_dwl,%pc),%d0
	pea.l		(_060ISP_TABLE-0x80,%pc,%d0)
	mov.l		0x4(%sp),%d0
	rtd		&0x4

#
# This file contains a set of define statements for constants
# in oreder to promote readability within the core code itself.
#

set LOCAL_SIZE,		96			# stack frame size(bytes)
set LV,			-LOCAL_SIZE		# stack offset

set EXC_ISR,		0x4			# stack status register
set EXC_IPC,		0x6			# stack pc
set EXC_IVOFF,		0xa			# stacked vector offset

set EXC_AREGS,		LV+64			# offset of all address regs
set EXC_DREGS,		LV+32			# offset of all data regs

set EXC_A7,		EXC_AREGS+(7*4)		# offset of a7
set EXC_A6,		EXC_AREGS+(6*4)		# offset of a6
set EXC_A5,		EXC_AREGS+(5*4)		# offset of a5
set EXC_A4,		EXC_AREGS+(4*4)		# offset of a4
set EXC_A3,		EXC_AREGS+(3*4)		# offset of a3
set EXC_A2,		EXC_AREGS+(2*4)		# offset of a2
set EXC_A1,		EXC_AREGS+(1*4)		# offset of a1
set EXC_A0,		EXC_AREGS+(0*4)		# offset of a0
set EXC_D7,		EXC_DREGS+(7*4)		# offset of d7
set EXC_D6,		EXC_DREGS+(6*4)		# offset of d6
set EXC_D5,		EXC_DREGS+(5*4)		# offset of d5
set EXC_D4,		EXC_DREGS+(4*4)		# offset of d4
set EXC_D3,		EXC_DREGS+(3*4)		# offset of d3
set EXC_D2,		EXC_DREGS+(2*4)		# offset of d2
set EXC_D1,		EXC_DREGS+(1*4)		# offset of d1
set EXC_D0,		EXC_DREGS+(0*4)		# offset of d0

set EXC_TEMP,		LV+16			# offset of temp stack space

set EXC_SAVVAL,		LV+12			# offset of old areg value
set EXC_SAVREG,		LV+11			# offset of old areg index

set SPCOND_FLG,		LV+10			# offset of spc condition flg

set EXC_CC,		LV+8			# offset of cc register
set EXC_EXTWPTR,	LV+4			# offset of current PC
set EXC_EXTWORD,	LV+2			# offset of current ext opword
set EXC_OPWORD,		LV+0			# offset of current opword

###########################
# SPecial CONDition FLaGs #
###########################
set mia7_flg,		0x04			# (a7)+ flag
set mda7_flg,		0x08			# -(a7) flag
set ichk_flg,		0x10			# chk exception flag
set idbyz_flg,		0x20			# divbyzero flag
set restore_flg,	0x40			# restore -(an)+ flag
set immed_flg,		0x80			# immediate data flag

set mia7_bit,		0x2			# (a7)+ bit
set mda7_bit,		0x3			# -(a7) bit
set ichk_bit,		0x4			# chk exception bit
set idbyz_bit,		0x5			# divbyzero bit
set restore_bit,	0x6			# restore -(a7)+ bit
set immed_bit,		0x7			# immediate data bit

#########
# Misc. #
#########
set BYTE,		1			# len(byte) == 1 byte
set WORD, 		2			# len(word) == 2 bytes
set LONG, 		4			# len(longword) == 4 bytes

#########################################################################
# XDEF ****************************************************************	#
#	_isp_unimp(): 060ISP entry point for Unimplemented Instruction	#
#									#
#	This handler should be the first code executed upon taking the 	#
# 	"Unimplemented Integer Instruction" exception in an operating	#
#	system.								#
#									#
# XREF ****************************************************************	#
#	_imem_read_{word,long}() - read instruction word/longword	#
#	_mul64() - emulate 64-bit multiply				#
# 	_div64() - emulate 64-bit divide				#
#	_moveperipheral() - emulate "movep"				#
#	_compandset() - emulate misaligned "cas"			#
#	_compandset2() - emulate "cas2"					#
#	_chk2_cmp2() - emulate "cmp2" and "chk2"			#
#	_isp_done() - "callout" for normal final exit			#
#	_real_trace() - "callout" for Trace exception			#
#	_real_chk() - "callout" for Chk exception			#
#	_real_divbyzero() - "callout" for DZ exception			#
#	_real_access() - "callout" for access error exception		#
#									#
# INPUT ***************************************************************	#
#	- The system stack contains the Unimp Int Instr stack frame	#
# 									#
# OUTPUT **************************************************************	#
#	If Trace exception:						#
#	- The system stack changed to contain Trace exc stack frame	#
#	If Chk exception:						#
#	- The system stack changed to contain Chk exc stack frame	#
#	If DZ exception:						#
#	- The system stack changed to contain DZ exc stack frame	#
#	If access error exception:					#
#	- The system stack changed to contain access err exc stk frame	#
#	Else:								#
#	- Results saved as appropriate					#
#									#
# ALGORITHM ***********************************************************	#
#	This handler fetches the first instruction longword from	#
# memory and decodes it to determine which of the unimplemented		#
# integer instructions caused this exception. This handler then calls	#
# one of _mul64(), _div64(), _moveperipheral(), _compandset(), 		#
# _compandset2(), or _chk2_cmp2() as appropriate. 			#
#	Some of these instructions, by their nature, may produce other	#
# types of exceptions. "div" can produce a divide-by-zero exception,	#
# and "chk2" can cause a "Chk" exception. In both cases, the current	#
# exception stack frame must be converted to an exception stack frame	#
# of the correct exception type and an exit must be made through	#
# _real_divbyzero() or _real_chk() as appropriate. In addition, all	#
# instructions may be executing while Trace is enabled. If so, then	#
# a Trace exception stack frame must be created and an exit made 	#
# through _real_trace().						#
#	Meanwhile, if any read or write to memory using the		#
# _mem_{read,write}() "callout"s returns a failing value, then an	#
# access error frame must be created and an exit made through		#
# _real_access().							#
#	If none of these occur, then a normal exit is made through	#
# _isp_done().								#
#									#
#	This handler, upon entry, saves almost all user-visible 	#
# address and data registers to the stack. Although this may seem to	#
# cause excess memory traffic, it was found that due to having to	#
# access these register files for things like data retrieval and <ea>	#
# calculations, it was more efficient to have them on the stack where	#
# they could be accessed by indexing rather than to make subroutine 	#
# calls to retrieve a register of a particular index. 			#
#									#
#########################################################################

	global		_isp_unimp
_isp_unimp:
	link.w 		%a6,&-LOCAL_SIZE	# create room for stack frame

	movm.l		&0x3fff,EXC_DREGS(%a6)	# store d0-d7/a0-a5
	mov.l		(%a6),EXC_A6(%a6)	# store a6

	btst		&0x5,EXC_ISR(%a6)	# from s or u mode?
	bne.b		uieh_s			# supervisor mode
uieh_u:
	mov.l		%usp,%a0		# fetch user stack pointer
	mov.l		%a0,EXC_A7(%a6)		# store a7
	bra.b		uieh_cont
uieh_s:
	lea		0xc(%a6),%a0
	mov.l		%a0,EXC_A7(%a6)		# store corrected sp

###############################################################################

uieh_cont:
	clr.b		SPCOND_FLG(%a6)		# clear "special case" flag

	mov.w		EXC_ISR(%a6),EXC_CC(%a6) # store cc copy on stack
	mov.l		EXC_IPC(%a6),EXC_EXTWPTR(%a6) # store extwptr on stack

#
# fetch the opword and first extension word pointed to by the stacked pc
# and store them to the stack for now
#
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_long		# fetch opword & extword
	mov.l		%d0,EXC_OPWORD(%a6)	# store extword on stack

	
#########################################################################
# muls.l	0100 1100 00 |<ea>|	0*** 1100 0000 0*** 		#
# mulu.l	0100 1100 00 |<ea>|	0*** 0100 0000 0***		#
#									#
# divs.l	0100 1100 01 |<ea>|	0*** 1100 0000 0***		#
# divu.l	0100 1100 01 |<ea>|	0*** 0100 0000 0***		#
#									#
# movep.w m2r	0000 ***1 00 001***	| <displacement>  |		#
# movep.l m2r	0000 ***1 01 001***	| <displacement>  |		#
# movep.w r2m	0000 ***1 10 001***	| <displacement>  |		#
# movep.l r2m	0000 ***1 11 001***	| <displacement>  |		#
#									#
# cas.w		0000 1100 11 |<ea>|	0000 000* **00 0***		#
# cas.l		0000 1110 11 |<ea>|	0000 000* **00 0***		#
#									#
# cas2.w	0000 1100 11 111100	**** 000* **00 0***		#
#					**** 000* **00 0***		#
# cas2.l	0000 1110 11 111100	**** 000* **00 0***		#
#					**** 000* **00 0***		#
#									#
# chk2.b	0000 0000 11 |<ea>|	**** 1000 0000 0000		#
# chk2.w	0000 0010 11 |<ea>|	**** 1000 0000 0000		#
# chk2.l	0000 0100 11 |<ea>|	**** 1000 0000 0000		#
#									#
# cmp2.b	0000 0000 11 |<ea>|	**** 0000 0000 0000		#
# cmp2.w	0000 0010 11 |<ea>|	**** 0000 0000 0000		#
# cmp2.l	0000 0100 11 |<ea>|	**** 0000 0000 0000		#
#########################################################################

#
# using bit 14 of the operation word, separate into 2 groups:
# (group1) mul64, div64
# (group2) movep, chk2, cmp2, cas2, cas
#
	btst		&0x1e,%d0		# group1 or group2
	beq.b		uieh_group2		# go handle group2

#
# now, w/ group1, make mul64's decode the fastest since it will
# most likely be used the most.
#
uieh_group1:
	btst		&0x16,%d0		# test for div64
	bne.b		uieh_div64		# go handle div64

uieh_mul64:
# mul64() may use ()+ addressing and may, therefore, alter a7

	bsr.l		_mul64			# _mul64()

	btst		&0x5,EXC_ISR(%a6)	# supervisor mode?
	beq.w		uieh_done
	btst		&mia7_bit,SPCOND_FLG(%a6) # was a7 changed?
	beq.w		uieh_done		# no
	btst		&0x7,EXC_ISR(%a6)	# is trace enabled?
	bne.w		uieh_trace_a7		# yes
	bra.w		uieh_a7			# no

uieh_div64:
# div64() may use ()+ addressing and may, therefore, alter a7.
# div64() may take a divide by zero exception.

	bsr.l		_div64			# _div64()

# here, we sort out all of the special cases that may have happened.
	btst		&mia7_bit,SPCOND_FLG(%a6) # was a7 changed?
	bne.b		uieh_div64_a7		# yes
uieh_div64_dbyz:
	btst		&idbyz_bit,SPCOND_FLG(%a6) # did divide-by-zero occur?
	bne.w		uieh_divbyzero		# yes
	bra.w		uieh_done		# no
uieh_div64_a7:
	btst		&0x5,EXC_ISR(%a6)	# supervisor mode?
	beq.b		uieh_div64_dbyz		# no
# here, a7 has been incremented by 4 bytes in supervisor mode. we still
# may have the following 3 cases:
#	(i)	(a7)+
#	(ii)	(a7)+; trace
#	(iii)	(a7)+; divide-by-zero
#
	btst		&idbyz_bit,SPCOND_FLG(%a6) # did divide-by-zero occur?
	bne.w		uieh_divbyzero_a7	# yes
	tst.b		EXC_ISR(%a6)		# no; is trace enabled?
	bmi.w		uieh_trace_a7		# yes
	bra.w		uieh_a7			# no
	
#
# now, w/ group2, make movep's decode the fastest since it will
# most likely be used the most.
#
uieh_group2:
	btst		&0x18,%d0		# test for not movep
	beq.b		uieh_not_movep


	bsr.l		_moveperipheral		# _movep()
	bra.w		uieh_done

uieh_not_movep:
	btst		&0x1b,%d0		# test for chk2,cmp2
	beq.b		uieh_chk2cmp2		# go handle chk2,cmp2

	swap		%d0			# put opword in lo word
	cmpi.b	 	%d0,&0xfc		# test for cas2
	beq.b		uieh_cas2		# go handle cas2

uieh_cas:

	bsr.l		_compandset		# _cas()

# the cases of "cas Dc,Du,(a7)+" and "cas Dc,Du,-(a7)" used from supervisor
# mode are simply not considered valid and therefore are not handled.

	bra.w		uieh_done

uieh_cas2:

	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word		# read extension word

	tst.l		%d1			# ifetch error?
	bne.w		isp_iacc		# yes

	bsr.l		_compandset2		# _cas2()
	bra.w		uieh_done

uieh_chk2cmp2:
# chk2 may take a chk exception

	bsr.l		_chk2_cmp2		# _chk2_cmp2()

# here we check to see if a chk trap should be taken
	cmpi.b		SPCOND_FLG(%a6),&ichk_flg
	bne.w		uieh_done
	bra.b		uieh_chk_trap

###########################################################################

#
# the required emulation has been completed. now, clean up the necessary stack
# info and prepare for rte
#
uieh_done:
	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes

# if exception occurred in user mode, then we have to restore a7 in case it
# changed. we don't have to update a7  for supervisor mose because that case
# doesn't flow through here
	btst		&0x5,EXC_ISR(%a6)	# user or supervisor?
	bne.b		uieh_finish		# supervisor

	mov.l		EXC_A7(%a6),%a0		# fetch user stack pointer
	mov.l		%a0,%usp		# restore it

uieh_finish:
	movm.l		EXC_DREGS(%a6),&0x3fff 	# restore d0-d7/a0-a5

	btst		&0x7,EXC_ISR(%a6)	# is trace mode on?
	bne.b		uieh_trace		# yes;go handle trace mode

	mov.l		EXC_EXTWPTR(%a6),EXC_IPC(%a6) # new pc on stack frame
	mov.l		EXC_A6(%a6),(%a6)	# prepare new a6 for unlink
	unlk		%a6			# unlink stack frame
	bra.l		_isp_done

#
# The instruction that was just emulated was also being traced. The trace 
# trap for this instruction will be lost unless we jump to the trace handler.
# So, here we create a Trace Exception format number two exception stack
# frame from the Unimplemented Integer Intruction Exception stack frame
# format number zero and jump to the user supplied hook "_real_trace()".
#
#		   UIEH FRAME		   TRACE FRAME
#		*****************	*****************
#		* 0x0 *  0x0f4	*	*    Current	*
#		*****************	*      PC	*
#		*    Current	*	*****************
#		*      PC 	*	* 0x2 *  0x024	*
#		*****************	*****************
#		*      SR	*	*     Next	*
#		*****************	*      PC	*
#	      ->*     Old   	*	*****************
#  from link -->*      A6	*	*      SR	*
#	        *****************	*****************
#	       /*      A7	*	*      New	* <-- for final unlink
#	      / *		*	*      A6	*
# link frame <  *****************	*****************
#	      \ ~		~	~		~
#	       \*****************	*****************
#
uieh_trace:
	mov.l		EXC_A6(%a6),-0x4(%a6)
	mov.w		EXC_ISR(%a6),0x0(%a6)
	mov.l		EXC_IPC(%a6),0x8(%a6)
	mov.l		EXC_EXTWPTR(%a6),0x2(%a6)
	mov.w		&0x2024,0x6(%a6)
	sub.l		&0x4,%a6
	unlk		%a6
	bra.l		_real_trace

#
#	   UIEH FRAME		    CHK FRAME
#	*****************	*****************
#	* 0x0 *  0x0f4	*	*    Current	*
#	*****************	*      PC	*
#	*    Current	*	*****************
#	*      PC	*	* 0x2 *  0x018	*
#	*****************	*****************
#	*      SR	*	*     Next	*
#	*****************	*      PC	*
#	    (4 words)		*****************
#				*      SR	*
#				*****************
#				    (6 words)
#
# the chk2 instruction should take a chk trap. so, here we must create a
# chk stack frame from an unimplemented integer instruction exception frame
# and jump to the user supplied entry point "_real_chk()".
#
uieh_chk_trap:
	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
	movm.l		EXC_DREGS(%a6),&0x3fff 	# restore d0-d7/a0-a5

	mov.w		EXC_ISR(%a6),(%a6)	# put new SR on stack
	mov.l		EXC_IPC(%a6),0x8(%a6)	# put "Current PC" on stack
	mov.l		EXC_EXTWPTR(%a6),0x2(%a6) # put "Next PC" on stack
	mov.w		&0x2018,0x6(%a6)	# put Vector Offset on stack

	mov.l		EXC_A6(%a6),%a6		# restore a6
	add.l		&LOCAL_SIZE,%sp		# clear stack frame

	bra.l		_real_chk

#
#	   UIEH FRAME		 DIVBYZERO FRAME
#	*****************	*****************
#	* 0x0 *  0x0f4	*	*    Current	*
#	*****************	*      PC	*
#	*    Current	*	*****************
#	*      PC	*	* 0x2 *  0x014	*
#	*****************	*****************
#	*      SR	*	*     Next	*
#	*****************	*      PC	*
#	    (4 words)		*****************
#				*      SR	*
#				*****************
#				    (6 words)
#
# the divide instruction should take an integer divide by zero trap. so, here 
# we must create a divbyzero stack frame from an unimplemented integer 
# instruction exception frame and jump to the user supplied entry point 
# "_real_divbyzero()".
#
uieh_divbyzero:
	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
	movm.l		EXC_DREGS(%a6),&0x3fff 	# restore d0-d7/a0-a5

	mov.w		EXC_ISR(%a6),(%a6)	# put new SR on stack
	mov.l		EXC_IPC(%a6),0x8(%a6)	# put "Current PC" on stack
	mov.l		EXC_EXTWPTR(%a6),0x2(%a6) # put "Next PC" on stack
	mov.w		&0x2014,0x6(%a6)	# put Vector Offset on stack

	mov.l		EXC_A6(%a6),%a6		# restore a6
	add.l		&LOCAL_SIZE,%sp		# clear stack frame

	bra.l		_real_divbyzero

#
#				 DIVBYZERO FRAME
#				*****************
#				*    Current	*
#	   UIEH FRAME		*      PC	*
#	*****************	*****************
#	* 0x0 *  0x0f4	*	* 0x2 * 0x014	*
#	*****************	*****************
#	*    Current	*	*     Next	*
#	*      PC	*	*      PC	*
#	*****************	*****************
#	*      SR	*	*      SR	*
#	*****************	*****************
#	    (4 words)		    (6 words)
#
# the divide instruction should take an integer divide by zero trap. so, here 
# we must create a divbyzero stack frame from an unimplemented integer 
# instruction exception frame and jump to the user supplied entry point 
# "_real_divbyzero()".
#
# However, we must also deal with the fact that (a7)+ was used from supervisor
# mode, thereby shifting the stack frame up 4 bytes.
#
uieh_divbyzero_a7:
	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
	movm.l		EXC_DREGS(%a6),&0x3fff 	# restore d0-d7/a0-a5

	mov.l		EXC_IPC(%a6),0xc(%a6)	# put "Current PC" on stack
	mov.w		&0x2014,0xa(%a6)	# put Vector Offset on stack
	mov.l		EXC_EXTWPTR(%a6),0x6(%a6) # put "Next PC" on stack

	mov.l		EXC_A6(%a6),%a6		# restore a6
	add.l		&4+LOCAL_SIZE,%sp	# clear stack frame

	bra.l		_real_divbyzero

#
#				   TRACE FRAME
#				*****************
#				*    Current	*
#	   UIEH FRAME		*      PC	*
#	*****************	*****************
#	* 0x0 *  0x0f4	*	* 0x2 * 0x024	*
#	*****************	*****************
#	*    Current	*	*     Next	*
#	*      PC	*	*      PC	*
#	*****************	*****************
#	*      SR	*	*      SR	*
#	*****************	*****************
#	    (4 words)		    (6 words)
#
# 
# The instruction that was just emulated was also being traced. The trace 
# trap for this instruction will be lost unless we jump to the trace handler.
# So, here we create a Trace Exception format number two exception stack
# frame from the Unimplemented Integer Intruction Exception stack frame
# format number zero and jump to the user supplied hook "_real_trace()".
#
# However, we must also deal with the fact that (a7)+ was used from supervisor
# mode, thereby shifting the stack frame up 4 bytes.
#
uieh_trace_a7:
	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
	movm.l		EXC_DREGS(%a6),&0x3fff 	# restore d0-d7/a0-a5

	mov.l		EXC_IPC(%a6),0xc(%a6)	# put "Current PC" on stack
	mov.w		&0x2024,0xa(%a6)	# put Vector Offset on stack
	mov.l		EXC_EXTWPTR(%a6),0x6(%a6) # put "Next PC" on stack

	mov.l		EXC_A6(%a6),%a6		# restore a6
	add.l		&4+LOCAL_SIZE,%sp	# clear stack frame

	bra.l		_real_trace

#
#				   UIEH FRAME	
#				*****************
#				* 0x0 * 0x0f4	*
#	   UIEH FRAME		*****************
#	*****************	*     Next	*
#	* 0x0 *  0x0f4	*	*      PC	*	
#	*****************	*****************
#	*    Current	*	*      SR	*
#	*      PC	*	*****************
#	*****************	    (4 words)
#	*      SR	*
#	*****************
#	    (4 words)
uieh_a7:
	mov.b		EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes
	movm.l		EXC_DREGS(%a6),&0x3fff 	# restore d0-d7/a0-a5

	mov.w		&0x00f4,0xe(%a6)	# put Vector Offset on stack
	mov.l		EXC_EXTWPTR(%a6),0xa(%a6) # put "Next PC" on stack
	mov.w		EXC_ISR(%a6),0x8(%a6)	# put SR on stack

	mov.l		EXC_A6(%a6),%a6		# restore a6
	add.l		&8+LOCAL_SIZE,%sp	# clear stack frame
	bra.l		_isp_done

##########

# this is the exit point if a data read or write fails.
# a0 = failing address
# d0 = fslw
isp_dacc:
	mov.l		%a0,(%a6)		# save address	
	mov.l		%d0,-0x4(%a6)		# save partial fslw

	lea		-64(%a6),%sp
	movm.l		(%sp)+,&0x7fff 		# restore d0-d7/a0-a6

	mov.l		0xc(%sp),-(%sp)		# move voff,hi(pc)
	mov.l		0x4(%sp),0x10(%sp)	# store fslw
	mov.l		0xc(%sp),0x4(%sp)	# store sr,lo(pc)
	mov.l		0x8(%sp),0xc(%sp)	# store address
	mov.l		(%sp)+,0x4(%sp)		# store voff,hi(pc)
	mov.w		&0x4008,0x6(%sp)	# store new voff

	bra.b		isp_acc_exit

# this is the exit point if an instruction word read fails.
# FSLW:
#	misaligned = true
#	read = true
# 	size = word
# 	instruction = true
# 	software emulation error = true
isp_iacc:
	movm.l		EXC_DREGS(%a6),&0x3fff 	# restore d0-d7/a0-a5
	unlk		%a6			# unlink frame
	sub.w		&0x8,%sp		# make room for acc frame
	mov.l		0x8(%sp),(%sp)		# store sr,lo(pc)
	mov.w		0xc(%sp),0x4(%sp)	# store hi(pc)
	mov.w		&0x4008,0x6(%sp)	# store new voff
	mov.l		0x2(%sp),0x8(%sp)	# store address (=pc)
	mov.l		&0x09428001,0xc(%sp)	# store fslw

isp_acc_exit:
	btst		&0x5,(%sp)		# user or supervisor?
	beq.b		isp_acc_exit2		# user
	bset		&0x2,0xd(%sp)		# set supervisor TM bit
isp_acc_exit2:
	bra.l		_real_access		

# if the addressing mode was (an)+ or -(an), the address register must
# be restored to it's pre-exception value before entering _real_access.
isp_restore:
	cmpi.b		SPCOND_FLG(%a6),&restore_flg # do we need a restore?
	bne.b		isp_restore_done	# no
	clr.l		%d0
	mov.b		EXC_SAVREG(%a6),%d0	# regno to restore
	mov.l		EXC_SAVVAL(%a6),(EXC_AREGS,%a6,%d0.l*4) # restore value
isp_restore_done:
	rts

#########################################################################
# XDEF ****************************************************************	#
#	_calc_ea(): routine to calculate effective address		#
#									#
# XREF ****************************************************************	#
# 	_imem_read_word() - read instruction word			#
# 	_imem_read_long() - read instruction longword			#
# 	_dmem_read_long() - read data longword (for memory indirect)	#
# 	isp_iacc() - handle instruction access error exception		#
#	isp_dacc() - handle data access error exception			#
#									#
# INPUT ***************************************************************	#
# 	d0 = number of bytes related to effective address (w,l)		#
#									#
# OUTPUT **************************************************************	#
#	If exiting through isp_dacc...					#
#		a0 = failing address					#
#		d0 = FSLW						#
#	elsif exiting though isp_iacc...				#
#		none							#
#	else								#
#		a0 = effective address					#
#									#
# ALGORITHM ***********************************************************	#
# 	The effective address type is decoded from the opword residing	#
# on the stack. A jump table is used to vector to a routine for the 	#
# appropriate mode. Since none of the emulated integer instructions	#
# uses byte-sized operands, only handle word and long operations.	#
#									#
# 	Dn,An	- shouldn't enter here					#
#	(An)	- fetch An value from stack				#
# 	-(An)	- fetch An value from stack; return decr value;		#
#		  place decr value on stack; store old value in case of	#
#		  future access error; if -(a7), set mda7_flg in 	#
#		  SPCOND_FLG						#
#	(An)+	- fetch An value from stack; return value;		#
#		  place incr value on stack; store old value in case of	#
#		  future access error; if (a7)+, set mia7_flg in	#
#		  SPCOND_FLG						#
#	(d16,An) - fetch An value from stack; read d16 using 		#
#		  _imem_read_word(); fetch may fail -> branch to	#
#		  isp_iacc()						#
#	(xxx).w,(xxx).l - use _imem_read_{word,long}() to fetch		#
#		  address; fetch may fail				#
#	#<data> - return address of immediate value; set immed_flg	#
#		  in SPCOND_FLG						#
#	(d16,PC) - fetch stacked PC value; read d16 using		#
#		  _imem_read_word(); fetch may fail -> branch to	#
#		  isp_iacc()						#
#	everything else - read needed displacements as appropriate w/	#
#		  _imem_read_{word,long}(); read may fail; if memory	#
# 		  indirect, read indirect address using			#
#		  _dmem_read_long() which may also fail			#
#									#
#########################################################################

	global		_calc_ea
_calc_ea:
	mov.l		%d0,%a0			# move # bytes to a0

# MODE and REG are taken from the EXC_OPWORD.
	mov.w		EXC_OPWORD(%a6),%d0	# fetch opcode word
	mov.w		%d0,%d1			# make a copy

	andi.w		&0x3f,%d0		# extract mode field
	andi.l		&0x7,%d1		# extract reg  field

# jump to the corresponding function for each {MODE,REG} pair.
	mov.w		(tbl_ea_mode.b,%pc,%d0.w*2), %d0 # fetch jmp distance
	jmp		(tbl_ea_mode.b,%pc,%d0.w*1) # jmp to correct ea mode

	swbeg		&64
tbl_ea_mode:
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode

	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode
	short		tbl_ea_mode	-	tbl_ea_mode

	short		addr_ind_a0	- 	tbl_ea_mode
	short		addr_ind_a1	- 	tbl_ea_mode
	short		addr_ind_a2	- 	tbl_ea_mode
	short		addr_ind_a3 	- 	tbl_ea_mode
	short		addr_ind_a4 	- 	tbl_ea_mode
	short		addr_ind_a5 	- 	tbl_ea_mode
	short		addr_ind_a6 	- 	tbl_ea_mode
	short		addr_ind_a7 	- 	tbl_ea_mode

	short		addr_ind_p_a0	- 	tbl_ea_mode
	short		addr_ind_p_a1 	- 	tbl_ea_mode
	short		addr_ind_p_a2 	- 	tbl_ea_mode
	short		addr_ind_p_a3 	- 	tbl_ea_mode
	short		addr_ind_p_a4 	- 	tbl_ea_mode
	short		addr_ind_p_a5 	- 	tbl_ea_mode
	short		addr_ind_p_a6 	- 	tbl_ea_mode
	short		addr_ind_p_a7 	- 	tbl_ea_mode

	short		addr_ind_m_a0 		- 	tbl_ea_mode
	short		addr_ind_m_a1 		- 	tbl_ea_mode
	short		addr_ind_m_a2 		- 	tbl_ea_mode
	short		addr_ind_m_a3 		- 	tbl_ea_mode
	short		addr_ind_m_a4 		- 	tbl_ea_mode
	short		addr_ind_m_a5 		- 	tbl_ea_mode
	short		addr_ind_m_a6 		- 	tbl_ea_mode
	short		addr_ind_m_a7 		- 	tbl_ea_mode

	short		addr_ind_disp_a0	- 	tbl_ea_mode
	short		addr_ind_disp_a1 	- 	tbl_ea_mode
	short		addr_ind_disp_a2 	- 	tbl_ea_mode
	short		addr_ind_disp_a3 	- 	tbl_ea_mode
	short		addr_ind_disp_a4 	- 	tbl_ea_mode
	short		addr_ind_disp_a5 	- 	tbl_ea_mode
	short		addr_ind_disp_a6 	- 	tbl_ea_mode
	short		addr_ind_disp_a7	-	tbl_ea_mode

	short		_addr_ind_ext 		- 	tbl_ea_mode
	short		_addr_ind_ext 		- 	tbl_ea_mode
	short		_addr_ind_ext 		- 	tbl_ea_mode
	short		_addr_ind_ext 		- 	tbl_ea_mode
	short		_addr_ind_ext 		- 	tbl_ea_mode
	short		_addr_ind_ext 		- 	tbl_ea_mode
	short		_addr_ind_ext 		- 	tbl_ea_mode
	short		_addr_ind_ext 		- 	tbl_ea_mode

	short		abs_short		- 	tbl_ea_mode
	short		abs_long		- 	tbl_ea_mode
	short		pc_ind			- 	tbl_ea_mode
	short		pc_ind_ext		- 	tbl_ea_mode
	short		immediate		- 	tbl_ea_mode
	short		tbl_ea_mode		- 	tbl_ea_mode
	short		tbl_ea_mode		- 	tbl_ea_mode
	short		tbl_ea_mode		- 	tbl_ea_mode

###################################
# Address register indirect: (An) #
###################################
addr_ind_a0:
	mov.l		EXC_A0(%a6),%a0		# Get current a0
	rts

addr_ind_a1:
	mov.l		EXC_A1(%a6),%a0		# Get current a1
	rts

addr_ind_a2:
	mov.l		EXC_A2(%a6),%a0		# Get current a2
	rts

addr_ind_a3:
	mov.l		EXC_A3(%a6),%a0		# Get current a3
	rts

addr_ind_a4:
	mov.l		EXC_A4(%a6),%a0		# Get current a4
	rts

addr_ind_a5:
	mov.l		EXC_A5(%a6),%a0		# Get current a5
	rts

addr_ind_a6:
	mov.l		EXC_A6(%a6),%a0		# Get current a6
	rts

addr_ind_a7:
	mov.l		EXC_A7(%a6),%a0		# Get current a7
	rts

#####################################################
# Address register indirect w/ postincrement: (An)+ #
#####################################################
addr_ind_p_a0:
	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A0(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A0(%a6)		# save incremented value
	
	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
	mov.b		&0x0,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_p_a1:
	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A1(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A1(%a6)		# save incremented value

	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
	mov.b		&0x1,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_p_a2:
	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A2(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A2(%a6)		# save incremented value

	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
	mov.b		&0x2,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_p_a3:
	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A3(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A3(%a6)		# save incremented value

	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
	mov.b		&0x3,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_p_a4:
	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A4(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A4(%a6)		# save incremented value

	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
	mov.b		&0x4,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_p_a5:
	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A5(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A5(%a6)		# save incremented value

	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
	mov.b		&0x5,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_p_a6:
	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A6(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A6(%a6)		# save incremented value

	mov.l		%a0,EXC_SAVVAL(%a6)	# save in case of access error
	mov.b		&0x6,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_p_a7:
	mov.b		&mia7_flg,SPCOND_FLG(%a6) # set "special case" flag

	mov.l		%a0,%d0			# copy no. bytes
	mov.l		EXC_A7(%a6),%a0		# load current value
	add.l		%a0,%d0			# increment
	mov.l		%d0,EXC_A7(%a6)		# save incremented value
	rts

####################################################
# Address register indirect w/ predecrement: -(An) #
####################################################
addr_ind_m_a0:
	mov.l		EXC_A0(%a6),%d0		# Get current a0
	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A0(%a6)		# Save decr value
	mov.l		%d0,%a0

	mov.b		&0x0,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_m_a1:
	mov.l		EXC_A1(%a6),%d0		# Get current a1
	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A1(%a6)		# Save decr value
	mov.l		%d0,%a0

	mov.b		&0x1,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_m_a2:
	mov.l		EXC_A2(%a6),%d0		# Get current a2
	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A2(%a6)		# Save decr value
	mov.l		%d0,%a0

	mov.b		&0x2,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_m_a3:
	mov.l		EXC_A3(%a6),%d0		# Get current a3
	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A3(%a6)		# Save decr value
	mov.l		%d0,%a0

	mov.b		&0x3,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_m_a4:
	mov.l		EXC_A4(%a6),%d0		# Get current a4
	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A4(%a6)		# Save decr value
	mov.l		%d0,%a0

	mov.b		&0x4,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_m_a5:
	mov.l		EXC_A5(%a6),%d0		# Get current a5
	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A5(%a6)		# Save decr value
	mov.l		%d0,%a0

	mov.b		&0x5,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_m_a6:
	mov.l		EXC_A6(%a6),%d0		# Get current a6
	mov.l		%d0,EXC_SAVVAL(%a6)	# save in case of access error
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A6(%a6)		# Save decr value
	mov.l		%d0,%a0

	mov.b		&0x6,EXC_SAVREG(%a6)	# save regno, too
	mov.b		&restore_flg,SPCOND_FLG(%a6) # set flag
	rts

addr_ind_m_a7:
	mov.b		&mda7_flg,SPCOND_FLG(%a6) # set "special case" flag

	mov.l		EXC_A7(%a6),%d0		# Get current a7
	sub.l		%a0,%d0			# Decrement
	mov.l		%d0,EXC_A7(%a6)		# Save decr value
	mov.l		%d0,%a0
	rts

########################################################
# Address register indirect w/ displacement: (d16, An) #
########################################################
addr_ind_disp_a0:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A0(%a6),%a0		# a0 + d16
	rts

addr_ind_disp_a1:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A1(%a6),%a0		# a1 + d16
	rts

addr_ind_disp_a2:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A2(%a6),%a0		# a2 + d16
	rts

addr_ind_disp_a3:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A3(%a6),%a0		# a3 + d16
	rts

addr_ind_disp_a4:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A4(%a6),%a0		# a4 + d16
	rts

addr_ind_disp_a5:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A5(%a6),%a0		# a5 + d16
	rts

addr_ind_disp_a6:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A6(%a6),%a0		# a6 + d16
	rts

addr_ind_disp_a7:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement
	add.l		EXC_A7(%a6),%a0		# a7 + d16
	rts

########################################################################
# Address register indirect w/ index(8-bit displacement): (dn, An, Xn) #
#    "       "         "    w/   "  (base displacement): (bd, An, Xn)  #
# Memory indirect postindexed: ([bd, An], Xn, od)		       #
# Memory indirect preindexed: ([bd, An, Xn], od)		       #
########################################################################
_addr_ind_ext:
	mov.l		%d1,-(%sp)

	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word		# fetch extword in d0

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.l		(%sp)+,%d1

	mov.l		(EXC_AREGS,%a6,%d1.w*4),%a0 # put base in a0

	btst		&0x8,%d0
	beq.b		addr_ind_index_8bit	# for ext word or not?

	movm.l		&0x3c00,-(%sp)		# save d2-d5

	mov.l		%d0,%d5			# put extword in d5
	mov.l		%a0,%d3			# put base in d3

	bra.l		calc_mem_ind		# calc memory indirect
	
addr_ind_index_8bit:
	mov.l		%d2,-(%sp)		# save old d2

	mov.l		%d0,%d1
	rol.w		&0x4,%d1
	andi.w		&0xf,%d1		# extract index regno

	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d1 # fetch index reg value

	btst		&0xb,%d0		# is it word or long?
	bne.b		aii8_long
	ext.l		%d1			# sign extend word index
aii8_long:
	mov.l		%d0,%d2
	rol.w		&0x7,%d2
	andi.l		&0x3,%d2		# extract scale value

	lsl.l		%d2,%d1			# shift index by scale

	extb.l		%d0			# sign extend displacement
	add.l		%d1,%d0			# index + disp
	add.l		%d0,%a0			# An + (index + disp)

	mov.l		(%sp)+,%d2		# restore old d2
	rts

######################
# Immediate: #<data> #
#########################################################################
# word, long: <ea> of the data is the current extension word		#
# 	pointer value. new extension word pointer is simply the old	#
# 	plus the number of bytes in the data type(2 or 4).		#
#########################################################################
immediate:
	mov.b		&immed_flg,SPCOND_FLG(%a6) # set immediate flag

	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch extension word ptr
	rts

###########################
# Absolute short: (XXX).W #
###########################
abs_short:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word		# fetch short address

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# return <ea> in a0
	rts

##########################
# Absolute long: (XXX).L #
##########################
abs_long:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_long		# fetch long address

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.l		%d0,%a0			# return <ea> in a0
	rts

#######################################################
# Program counter indirect w/ displacement: (d16, PC) #
#######################################################
pc_ind:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word		# fetch word displacement

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.w		%d0,%a0			# sign extend displacement

	add.l		EXC_EXTWPTR(%a6),%a0	# pc + d16

# _imem_read_word() increased the extwptr by 2. need to adjust here.
	subq.l		&0x2,%a0		# adjust <ea>

	rts

##########################################################
# PC indirect w/ index(8-bit displacement): (d8, PC, An) #
# "     "     w/   "  (base displacement): (bd, PC, An)  #
# PC memory indirect postindexed: ([bd, PC], Xn, od)     #
# PC memory indirect preindexed: ([bd, PC, Xn], od)      #
##########################################################
pc_ind_ext:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word		# fetch ext word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.l		EXC_EXTWPTR(%a6),%a0	# put base in a0
	subq.l		&0x2,%a0		# adjust base

	btst		&0x8,%d0		# is disp only 8 bits?
	beq.b		pc_ind_index_8bit	# yes

# the indexed addressing mode uses a base displacement of size
# word or long
	movm.l		&0x3c00,-(%sp)		# save d2-d5

	mov.l		%d0,%d5			# put extword in d5
	mov.l		%a0,%d3			# put base in d3

	bra.l		calc_mem_ind		# calc memory indirect
	
pc_ind_index_8bit:
 	mov.l		%d2,-(%sp)		# create a temp register

	mov.l		%d0,%d1			# make extword copy
	rol.w		&0x4,%d1		# rotate reg num into place
	andi.w		&0xf,%d1		# extract register number

	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d1 # fetch index reg value

	btst		&0xb,%d0		# is index word or long?
	bne.b		pii8_long		# long
	ext.l		%d1			# sign extend word index
pii8_long:
	mov.l		%d0,%d2			# make extword copy
	rol.w		&0x7,%d2		# rotate scale value into place
	andi.l		&0x3,%d2		# extract scale value

	lsl.l		%d2,%d1			# shift index by scale

	extb.l		%d0			# sign extend displacement
	add.l		%d1,%d0			# index + disp
	add.l		%d0,%a0			# An + (index + disp)

	mov.l		(%sp)+,%d2		# restore temp register

	rts

# a5 = exc_extwptr	(global to uaeh)
# a4 = exc_opword	(global to uaeh)
# a3 = exc_dregs	(global to uaeh)

# d2 = index		(internal "     "    )
# d3 = base		(internal "     "    )
# d4 = od		(internal "     "    )
# d5 = extword		(internal "     "    )
calc_mem_ind:
	btst		&0x6,%d5		# is the index suppressed?
	beq.b		calc_index
	clr.l		%d2			# yes, so index = 0
	bra.b		base_supp_ck
calc_index:
	bfextu		%d5{&16:&4},%d2
	mov.l		(EXC_DREGS,%a6,%d2.w*4),%d2
	btst		&0xb,%d5		# is index word or long?
	bne.b		no_ext
	ext.l		%d2
no_ext:
	bfextu		%d5{&21:&2},%d0
	lsl.l		%d0,%d2
base_supp_ck:
	btst		&0x7,%d5		# is the bd suppressed?
	beq.b		no_base_sup
	clr.l		%d3
no_base_sup:
	bfextu		%d5{&26:&2},%d0	# get bd size
#	beq.l		_error			# if (size == 0) it's reserved
	cmpi.b	 	%d0,&2
	blt.b		no_bd
	beq.b		get_word_bd

	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_long
	
	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	bra.b		chk_ind
get_word_bd:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	ext.l		%d0			# sign extend bd
	
chk_ind:
	add.l		%d0,%d3			# base += bd
no_bd:
	bfextu		%d5{&30:&2},%d0		# is od suppressed?
	beq.w		aii_bd
	cmpi.b	 	%d0,&0x2
	blt.b		null_od
	beq.b		word_od
	
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x4,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_long

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	bra.b 		add_them

word_od:
	mov.l		EXC_EXTWPTR(%a6),%a0	# fetch instruction addr
	addq.l		&0x2,EXC_EXTWPTR(%a6)	# incr instruction ptr
	bsr.l		_imem_read_word

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	ext.l		%d0			# sign extend od
	bra.b		add_them

null_od:
	clr.l		%d0
add_them:
	mov.l		%d0,%d4
	btst		&0x2,%d5		# pre or post indexing?
	beq.b		pre_indexed

	mov.l		%d3,%a0
	bsr.l		_dmem_read_long

	tst.l		%d1			# dfetch error?
	bne.b		calc_ea_err		# yes

	add.l		%d2,%d0			# <ea> += index
	add.l		%d4,%d0			# <ea> += od
	bra.b		done_ea

pre_indexed:
	add.l		%d2,%d3			# preindexing
	mov.l		%d3,%a0
	bsr.l		_dmem_read_long

	tst.l		%d1			# ifetch error?
	bne.b		calc_ea_err		# yes

	add.l		%d4,%d0			# ea += od
	bra.b		done_ea

aii_bd:
	add.l		%d2,%d3			# ea = (base + bd) + index
	mov.l		%d3,%d0
done_ea:
	mov.l		%d0,%a0

	movm.l		(%sp)+,&0x003c		# restore d2-d5
	rts

# if dmem_read_long() returns a fail message in d1, the package
# must create an access error frame. here, we pass a skeleton fslw
# and the failing address to the routine that creates the new frame.
# FSLW:
# 	read = true
# 	size = longword
#	TM = data
# 	software emulation error = true
calc_ea_err:
	mov.l		%d3,%a0			# pass failing address
	mov.l		&0x01010001,%d0		# pass fslw
	bra.l		isp_dacc

#########################################################################
# XDEF **************************************************************** #
# 	_moveperipheral(): routine to emulate movep instruction		#
#									#
# XREF **************************************************************** #
#	_dmem_read_byte() - read byte from memory			#
#	_dmem_write_byte() - write byte to memory			#
#	isp_dacc() - handle data access error exception			#
#									#
# INPUT *************************************************************** #
#	none								#
#									#
# OUTPUT ************************************************************** #
#	If exiting through isp_dacc...					#
#		a0 = failing address					#
#		d0 = FSLW						#
#	else								#
#		none							#
#									#
# ALGORITHM ***********************************************************	#
#	Decode the movep instruction words stored at EXC_OPWORD and	#
# either read or write the required bytes from/to memory. Use the	#
# _dmem_{read,write}_byte() routines. If one of the memory routines	#
# returns a failing value, we must pass the failing address and	a FSLW	#
# to the _isp_dacc() routine.						#
#	Since this instruction is used to access peripherals, make sure	#
# to only access the required bytes.					#
#									#
#########################################################################

###########################
# movep.(w,l)	Dx,(d,Ay) #
# movep.(w,l)	(d,Ay),Dx #
###########################
	global 		_moveperipheral
_moveperipheral:
	mov.w		EXC_OPWORD(%a6),%d1	# fetch the opcode word

	mov.b		%d1,%d0
	and.w		&0x7,%d0		# extract Ay from opcode word

	mov.l		(EXC_AREGS,%a6,%d0.w*4),%a0 # fetch ay

	add.w		EXC_EXTWORD(%a6),%a0	# add: an + sgn_ext(disp)

	btst		&0x7,%d1		# (reg 2 mem) or (mem 2 reg)
	beq.w		mem2reg

# reg2mem: fetch dx, then write it to memory
reg2mem:
	mov.w		%d1,%d0
	rol.w		&0x7,%d0
	and.w		&0x7,%d0		# extract Dx from opcode word

	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d0 # fetch dx

	btst		&0x6,%d1		# word or long operation?
	beq.b		r2mwtrans

# a0 = dst addr
# d0 = Dx
r2mltrans:
	mov.l		%d0,%d2			# store data
	mov.l		%a0,%a2			# store addr
	rol.l		&0x8,%d2
	mov.l		%d2,%d0

	bsr.l		_dmem_write_byte	# os  : write hi

	tst.l		%d1			# dfetch error?
	bne.w		movp_write_err		# yes

	add.w		&0x2,%a2		# incr addr
	mov.l		%a2,%a0
	rol.l		&0x8,%d2
	mov.l		%d2,%d0

	bsr.l		_dmem_write_byte	# os  : write lo

	tst.l		%d1			# dfetch error?
	bne.w		movp_write_err		# yes

	add.w		&0x2,%a2		# incr addr
	mov.l		%a2,%a0
	rol.l		&0x8,%d2
	mov.l		%d2,%d0

	bsr.l		_dmem_write_byte	# os  : write lo

	tst.l		%d1			# dfetch error?
	bne.w		movp_write_err		# yes

	add.w		&0x2,%a2		# incr addr
	mov.l		%a2,%a0
	rol.l		&0x8,%d2
	mov.l		%d2,%d0

	bsr.l		_dmem_write_byte	# os  : write lo

	tst.l		%d1			# dfetch error?
	bne.w		movp_write_err		# yes

	rts

# a0 = dst addr
# d0 = Dx
r2mwtrans:
	mov.l		%d0,%d2			# store data
	mov.l		%a0,%a2			# store addr
	lsr.w		&0x8,%d0

	bsr.l		_dmem_write_byte	# os  : write hi

	tst.l		%d1			# dfetch error?
	bne.w		movp_write_err		# yes

	add.w		&0x2,%a2
	mov.l		%a2,%a0
	mov.l		%d2,%d0

	bsr.l		_dmem_write_byte	# os  : write lo

	tst.l		%d1			# dfetch error?
	bne.w		movp_write_err		# yes

	rts

# mem2reg: read bytes from memory.
# determines the dest register, and then writes the bytes into it.
mem2reg:
	btst		&0x6,%d1		# word or long operation?
	beq.b		m2rwtrans

# a0 = dst addr
m2rltrans:
	mov.l		%a0,%a2			# store addr

	bsr.l		_dmem_read_byte		# read first byte

	tst.l		%d1			# dfetch error?
	bne.w		movp_read_err		# yes

	mov.l		%d0,%d2

	add.w		&0x2,%a2		# incr addr by 2 bytes
	mov.l		%a2,%a0

	bsr.l		_dmem_read_byte		# read second byte

	tst.l		%d1			# dfetch error?
	bne.w		movp_read_err		# yes

	lsl.w		&0x8,%d2
	mov.b		%d0,%d2			# append bytes

	add.w		&0x2,%a2		# incr addr by 2 bytes
	mov.l		%a2,%a0

	bsr.l		_dmem_read_byte		# read second byte

	tst.l		%d1			# dfetch error?
	bne.w		movp_read_err		# yes

	lsl.l		&0x8,%d2
	mov.b		%d0,%d2			# append bytes

	add.w		&0x2,%a2		# incr addr by 2 bytes
	mov.l		%a2,%a0

	bsr.l		_dmem_read_byte		# read second byte

	tst.l		%d1			# dfetch error?
	bne.w		movp_read_err		# yes

	lsl.l		&0x8,%d2
	mov.b		%d0,%d2			# append bytes

	mov.b		EXC_OPWORD(%a6),%d1
	lsr.b		&0x1,%d1
	and.w		&0x7,%d1		# extract Dx from opcode word
	
	mov.l		%d2,(EXC_DREGS,%a6,%d1.w*4) # store dx

	rts
	
# a0 = dst addr
m2rwtrans:
	mov.l		%a0,%a2			# store addr

	bsr.l		_dmem_read_byte		# read first byte

	tst.l		%d1			# dfetch error?
	bne.w		movp_read_err		# yes

	mov.l		%d0,%d2

	add.w		&0x2,%a2		# incr addr by 2 bytes
	mov.l		%a2,%a0

	bsr.l		_dmem_read_byte		# read second byte

	tst.l		%d1			# dfetch error?
	bne.w		movp_read_err		# yes

	lsl.w		&0x8,%d2
	mov.b		%d0,%d2			# append bytes

	mov.b		EXC_OPWORD(%a6),%d1
	lsr.b		&0x1,%d1
	and.w		&0x7,%d1		# extract Dx from opcode word
	
	mov.w		%d2,(EXC_DREGS+2,%a6,%d1.w*4) # store dx

	rts

# if dmem_{read,write}_byte() returns a fail message in d1, the package
# must create an access error frame. here, we pass a skeleton fslw
# and the failing address to the routine that creates the new frame.
# FSLW:
# 	write = true
#	size = byte
#	TM = data
#	software emulation error = true
movp_write_err:
	mov.l		%a2,%a0			# pass failing address
	mov.l		&0x00a10001,%d0		# pass fslw
	bra.l		isp_dacc

# FSLW:
# 	read = true
#	size = byte
#	TM = data
#	software emulation error = true
movp_read_err:
	mov.l		%a2,%a0			# pass failing address
	mov.l		&0x01210001,%d0		# pass fslw
	bra.l		isp_dacc

#########################################################################
# XDEF ****************************************************************	#
# 	_chk2_cmp2(): routine to emulate chk2/cmp2 instructions		#
#									#
# XREF ****************************************************************	#
#	_calc_ea(): calculate effective address				#
#	_dmem_read_long(): read operands				#
# 	_dmem_read_word(): read operands				#
#	isp_dacc(): handle data access error exception			#
#									#
# INPUT ***************************************************************	#
#	none								#
#									#
# OUTPUT **************************************************************	#
#	If exiting through isp_dacc...					#
#		a0 = failing address					#
#		d0 = FSLW						#
#	else								#
# 		none							#
#									#
# ALGORITHM ***********************************************************	#
#	First, calculate the effective address, then fetch the byte,	#
# word, or longword sized operands. Then, in the interest of 		#
# simplicity, all operands are converted to longword size whether the 	#
# operation is byte, word, or long. The bounds are sign extended 	#
# accordingly. If Rn is a data regsiter, Rn is also sign extended. If 	#
# Rn is an address register, it need not be sign extended since the 	#
# full register is always used.						#
#	The comparisons are made and the condition codes calculated.	#
# If the instruction is chk2 and the Rn value is out-of-bounds, set	#
# the ichk_flg in SPCOND_FLG.						#
#	If the memory fetch returns a failing value, pass the failing 	#
# address and FSLW to the isp_dacc() routine.				#
#									#
#########################################################################

	global 		_chk2_cmp2
_chk2_cmp2:

# passing size parameter doesn't matter since chk2 & cmp2 can't do
# either predecrement, postincrement, or immediate.
	bsr.l		_calc_ea		# calculate <ea>

	mov.b		EXC_EXTWORD(%a6), %d0	# fetch hi extension word
	rol.b		&0x4, %d0		# rotate reg bits into lo
	and.w		&0xf, %d0		# extract reg bits

	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d2 # get regval

	cmpi.b		EXC_OPWORD(%a6), &0x2	# what size is operation?
	blt.b		chk2_cmp2_byte		# size == byte
	beq.b		chk2_cmp2_word		# size == word

# the bounds are longword size. call routine to read the lower
# bound into d0 and the higher bound into d1.
chk2_cmp2_long:
	mov.l		%a0,%a2			# save copy of <ea>
	bsr.l		_dmem_read_long		# fetch long lower bound

	tst.l		%d1			# dfetch error?
	bne.w		chk2_cmp2_err_l		# yes

	mov.l		%d0,%d3			# save long lower bound
	addq.l		&0x4,%a2
	mov.l		%a2,%a0			# pass <ea> of long upper bound
	bsr.l		_dmem_read_long		# fetch long upper bound

	tst.l		%d1			# dfetch error?
	bne.w		chk2_cmp2_err_l		# yes

	mov.l		%d0,%d1			# long upper bound in d1
	mov.l		%d3,%d0			# long lower bound in d0
	bra.w		chk2_cmp2_compare	# go do the compare emulation

# the bounds are word size. fetch them in one subroutine call by
# reading a longword. sign extend both. if it's a data operation,
# sign extend Rn to long, also.
chk2_cmp2_word:
	mov.l		%a0,%a2
	bsr.l		_dmem_read_long		# fetch 2 word bounds

	tst.l		%d1			# dfetch error?
	bne.w		chk2_cmp2_err_l		# yes

	mov.w		%d0, %d1		# place hi in %d1
	swap		%d0			# place lo in %d0

	ext.l		%d0			# sign extend lo bnd
	ext.l		%d1			# sign extend hi bnd

	btst		&0x7, EXC_EXTWORD(%a6)	# address compare?
	bne.w		chk2_cmp2_compare	# yes; don't sign extend

# operation is a data register compare.
# sign extend word to long so we can do simple longword compares.
	ext.l		%d2			# sign extend data word
	bra.w		chk2_cmp2_compare	# go emulate compare

# the bounds are byte size. fetch them in one subroutine call by
# reading a word. sign extend both. if it's a data operation,
# sign extend Rn to long, also.
chk2_cmp2_byte:
	mov.l		%a0,%a2
	bsr.l		_dmem_read_word		# fetch 2 byte bounds

	tst.l		%d1			# dfetch error?
	bne.w		chk2_cmp2_err_w		# yes

	mov.b		%d0, %d1		# place hi in %d1
	lsr.w		&0x8, %d0		# place lo in %d0

	extb.l		%d0			# sign extend lo bnd
	extb.l		%d1			# sign extend hi bnd

	btst		&0x7, EXC_EXTWORD(%a6)	# address compare?
	bne.b		chk2_cmp2_compare	# yes; don't sign extend

# operation is a data register compare.
# sign extend byte to long so we can do simple longword compares.
	extb.l		%d2			# sign extend data byte

#
# To set the ccodes correctly:
# 	(1) save 'Z' bit from (Rn - lo)
#	(2) save 'Z' and 'N' bits from ((hi - lo) - (Rn - hi))
#	(3) keep 'X', 'N', and 'V' from before instruction
#	(4) combine ccodes
#
chk2_cmp2_compare:
	sub.l		%d0, %d2		# (Rn - lo)
	mov.w		%cc, %d3		# fetch resulting ccodes
	andi.b		&0x4, %d3		# keep 'Z' bit
	sub.l		%d0, %d1		# (hi - lo)
	cmp.l	 	%d1,%d2			# ((hi - lo) - (Rn - hi))

	mov.w		%cc, %d4		# fetch resulting ccodes
	or.b		%d4, %d3		# combine w/ earlier ccodes
	andi.b		&0x5, %d3		# keep 'Z' and 'N'

	mov.w		EXC_CC(%a6), %d4	# fetch old ccodes
	andi.b		&0x1a, %d4		# keep 'X','N','V' bits
	or.b		%d3, %d4		# insert new ccodes
	mov.w		%d4, EXC_CC(%a6)	# save new ccodes

	btst		&0x3, EXC_EXTWORD(%a6)	# separate chk2,cmp2
	bne.b		chk2_finish		# it's a chk2

	rts

# this code handles the only difference between chk2 and cmp2. chk2 would
# have trapped out if the value was out of bounds. we check this by seeing
# if the 'N' bit was set by the operation.
chk2_finish:	
	btst		&0x0, %d4		# is 'N' bit set?
	bne.b		chk2_trap		# yes;chk2 should trap
	rts
chk2_trap:
	mov.b		&ichk_flg,SPCOND_FLG(%a6) # set "special case" flag
	rts

# if dmem_read_{long,word}() returns a fail message in d1, the package
# must create an access error frame. here, we pass a skeleton fslw
# and the failing address to the routine that creates the new frame.
# FSLW:
#	read = true
#	size = longword
#	TM = data
# 	software emulation error = true
chk2_cmp2_err_l:
	mov.l		%a2,%a0			# pass failing address
	mov.l		&0x01010001,%d0		# pass fslw
	bra.l		isp_dacc

# FSLW:
#	read = true
#	size = word
#	TM = data
# 	software emulation error = true
chk2_cmp2_err_w:
	mov.l		%a2,%a0			# pass failing address
	mov.l		&0x01410001,%d0		# pass fslw
	bra.l		isp_dacc

#########################################################################
# XDEF ****************************************************************	#
# 	_div64(): routine to emulate div{u,s}.l <ea>,Dr:Dq		#
#							64/32->32r:32q	#
#									#
# XREF ****************************************************************	#
#	_calc_ea() - calculate effective address			#
# 	isp_iacc() - handle instruction access error exception		#
#	isp_dacc() - handle data access error exception			#
#	isp_restore() - restore An on access error w/ -() or ()+	#
#									#
# INPUT ***************************************************************	#
#	none								#
#									#
# OUTPUT **************************************************************	#
# 	If exiting through isp_dacc...					#
#		a0 = failing address					#
# 		d0 = FSLW						#
#	else								#
#		none							#
#									#
# ALGORITHM ***********************************************************	#
# 	First, decode the operand location. If it's in Dn, fetch from	#
# the stack. If it's in memory, use _calc_ea() to calculate the 	#
# effective address. Use _dmem_read_long() to fetch at that address.	#
# Unless the operand is immediate data. Then use _imem_read_long().	#
# Send failures to isp_dacc() or isp_iacc() as appropriate.		#
#	If the operands are signed, make them unsigned and save	the 	#
# sign info for later. Separate out special cases like divide-by-zero	#
# or 32-bit divides if possible. Else, use a special math algorithm	#
# to calculate the result. 						#
#	Restore sign info if signed instruction. Set the condition 	#
# codes. Set idbyz_flg in SPCOND_FLG if divisor was zero. Store the 	#
# quotient and remainder in the appropriate data registers on the stack.#
#									#
#########################################################################

set	NDIVISOR,	EXC_TEMP+0x0
set	NDIVIDEND,	EXC_TEMP+0x1
set	NDRSAVE,	EXC_TEMP+0x2
set	NDQSAVE,	EXC_TEMP+0x4
set	DDSECOND,	EXC_TEMP+0x6
set	DDQUOTIENT,	EXC_TEMP+0x8
set	DDNORMAL,	EXC_TEMP+0xc

	global		_div64
#############
# div(u,s)l #
#############
_div64:
	mov.b		EXC_OPWORD+1(%a6), %d0
	andi.b		&0x38, %d0		# extract src mode

	bne.w		dcontrolmodel_s		# %dn dest or control mode?

	mov.b		EXC_OPWORD+1(%a6), %d0	# extract Dn from opcode
	andi.w		&0x7, %d0
	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d7 # fetch divisor from register

dgotsrcl:
	beq.w		div64eq0		# divisor is = 0!!!

	mov.b		EXC_EXTWORD+1(%a6), %d0	# extract Dr from extword
	mov.b		EXC_EXTWORD(%a6), %d1	# extract Dq from extword
	and.w		&0x7, %d0
	lsr.b		&0x4, %d1
	and.w		&0x7, %d1
	mov.w		%d0, NDRSAVE(%a6)	# save Dr for later
	mov.w		%d1, NDQSAVE(%a6)	# save Dq for later

# fetch %dr and %dq directly off stack since all regs are saved there
	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d5 # get dividend hi
	mov.l		(EXC_DREGS,%a6,%d1.w*4), %d6 # get dividend lo

# separate signed and unsigned divide
	btst		&0x3, EXC_EXTWORD(%a6)	# signed or unsigned?
	beq.b		dspecialcases		# use positive divide

# save the sign of the divisor
# make divisor unsigned if it's negative
	tst.l		%d7			# chk sign of divisor
	slt		NDIVISOR(%a6)		# save sign of divisor
	bpl.b		dsgndividend
	neg.l		%d7			# complement negative divisor

# save the sign of the dividend
# make dividend unsigned if it's negative
dsgndividend:
	tst.l		%d5			# chk sign of hi(dividend)
	slt		NDIVIDEND(%a6)		# save sign of dividend
	bpl.b		dspecialcases

	mov.w		&0x0, %cc		# clear 'X' cc bit
	negx.l		%d6			# complement signed dividend
	negx.l		%d5

# extract some special cases:
# 	- is (dividend == 0) ?
#	- is (hi(dividend) == 0 && (divisor <= lo(dividend))) ? (32-bit div)
dspecialcases:
	tst.l		%d5			# is (hi(dividend) == 0)
	bne.b		dnormaldivide		# no, so try it the long way

	tst.l		%d6			# is (lo(dividend) == 0), too
	beq.w		ddone			# yes, so (dividend == 0)

	cmp.l	 	%d7,%d6			# is (divisor <= lo(dividend))
	bls.b		d32bitdivide		# yes, so use 32 bit divide

	exg		%d5,%d6			# q = 0, r = dividend
	bra.w		divfinish		# can't divide, we're done.

d32bitdivide:
	tdivu.l		%d7, %d5:%d6		# it's only a 32/32 bit div!

	bra.b		divfinish

dnormaldivide:
# last special case:
# 	- is hi(dividend) >= divisor ? if yes, then overflow
	cmp.l		%d7,%d5
	bls.b		ddovf			# answer won't fit in 32 bits

# perform the divide algorithm:
	bsr.l		dclassical		# do int divide

# separate into signed and unsigned finishes.
divfinish:
	btst		&0x3, EXC_EXTWORD(%a6)	# do divs, divu separately
	beq.b		ddone			# divu has no processing!!!

# it was a divs.l, so ccode setting is a little more complicated...
	tst.b		NDIVIDEND(%a6)		# remainder has same sign 
	beq.b		dcc			# as dividend.
	neg.l		%d5			# sgn(rem) = sgn(dividend)
dcc:
	mov.b		NDIVISOR(%a6), %d0
	eor.b		%d0, NDIVIDEND(%a6)	# chk if quotient is negative
	beq.b		dqpos			# branch to quot positive

# 0x80000000 is the largest number representable as a 32-bit negative
# number. the negative of 0x80000000 is 0x80000000.
	cmpi.l		%d6, &0x80000000	# will (-quot) fit in 32 bits?
	bhi.b		ddovf

	neg.l		%d6			# make (-quot) 2's comp

	bra.b		ddone

dqpos:
	btst		&0x1f, %d6		# will (+quot) fit in 32 bits?
	bne.b		ddovf

ddone:
# at this point, result is normal so ccodes are set based on result.
	mov.w		EXC_CC(%a6), %cc
	tst.l		%d6			# set %ccode bits
	mov.w		%cc, EXC_CC(%a6)

	mov.w		NDRSAVE(%a6), %d0	# get Dr off stack
	mov.w		NDQSAVE(%a6), %d1	# get Dq off stack	

# if the register numbers are the same, only the quotient gets saved.
# so, if we always save the quotient second, we save ourselves a cmp&beq
	mov.l		%d5, (EXC_DREGS,%a6,%d0.w*4) # save remainder
	mov.l		%d6, (EXC_DREGS,%a6,%d1.w*4) # save quotient

	rts

ddovf:
	bset		&0x1, EXC_CC+1(%a6)	# 'V' set on overflow
	bclr		&0x0, EXC_CC+1(%a6)	# 'C' cleared on overflow

	rts

div64eq0:
	andi.b		&0x1e, EXC_CC+1(%a6)	# clear 'C' bit on divbyzero
	ori.b		&idbyz_flg,SPCOND_FLG(%a6) # set "special case" flag
	rts

###########################################################################
#########################################################################
# This routine uses the 'classical' Algorithm D from Donald Knuth's	#
# Art of Computer Programming, vol II, Seminumerical Algorithms.	#
# For this implementation b=2**16, and the target is U1U2U3U4/V1V2,	#
# where U,V are words of the quadword dividend and longword divisor,	#
# and U1, V1 are the most significant words.				#
# 									#
# The most sig. longword of the 64 bit dividend must be in %d5, least 	#
# in %d6. The divisor must be in the variable ddivisor, and the		#
# signed/unsigned flag ddusign must be set (0=unsigned,1=signed).	#
# The quotient is returned in %d6, remainder in %d5, unless the		#
# v (overflow) bit is set in the saved %ccr. If overflow, the dividend	#
# is unchanged.								#
#########################################################################
dclassical:
# if the divisor msw is 0, use simpler algorithm then the full blown
# one at ddknuth:

	cmpi.l		%d7, &0xffff
	bhi.b		ddknuth			# go use D. Knuth algorithm

# Since the divisor is only a word (and larger than the mslw of the dividend),
# a simpler algorithm may be used :
# In the general case, four quotient words would be created by
# dividing the divisor word into each dividend word. In this case,
# the first two quotient words must be zero, or overflow would occur.
# Since we already checked this case above, we can treat the most significant
# longword of the dividend as (0) remainder (see Knuth) and merely complete 
# the last two divisions to get a quotient longword and word remainder:

	clr.l		%d1
	swap		%d5			# same as r*b if previous step rqd
	swap		%d6			# get u3 to lsw position
	mov.w		%d6, %d5		# rb + u3

	divu.w		%d7, %d5

	mov.w		%d5, %d1		# first quotient word
	swap		%d6			# get u4
	mov.w		%d6, %d5		# rb + u4

	divu.w		%d7, %d5

	swap		%d1
	mov.w		%d5, %d1		# 2nd quotient 'digit'
	clr.w		%d5
	swap		%d5			# now remainder
	mov.l		%d1, %d6		# and quotient

	rts

ddknuth:
# In this algorithm, the divisor is treated as a 2 digit (word) number
# which is divided into a 3 digit (word) dividend to get one quotient
# digit (word). After subtraction, the dividend is shifted and the
# process repeated. Before beginning, the divisor and quotient are
# 'normalized' so that the process of estimating the quotient digit
# will yield verifiably correct results..

	clr.l		DDNORMAL(%a6)		# count of shifts for normalization
	clr.b		DDSECOND(%a6)		# clear flag for quotient digits
	clr.l		%d1			# %d1 will hold trial quotient
ddnchk:
	btst		&31, %d7		# must we normalize? first word of 
	bne.b		ddnormalized		# divisor (V1) must be >= 65536/2
	addq.l		&0x1, DDNORMAL(%a6)	# count normalization shifts
	lsl.l		&0x1, %d7		# shift the divisor
	lsl.l		&0x1, %d6		# shift u4,u3 with overflow to u2
	roxl.l		&0x1, %d5		# shift u1,u2 
	bra.w		ddnchk
ddnormalized:

# Now calculate an estimate of the quotient words (msw first, then lsw).
# The comments use subscripts for the first quotient digit determination.
	mov.l		%d7, %d3		# divisor
	mov.l		%d5, %d2		# dividend mslw
	swap		%d2
	swap		%d3
	cmp.w	 	%d2, %d3		# V1 = U1 ?
	bne.b		ddqcalc1
	mov.w		&0xffff, %d1		# use max trial quotient word
	bra.b		ddadj0
ddqcalc1:
	mov.l		%d5, %d1		

	divu.w		%d3, %d1		# use quotient of mslw/msw

	andi.l		&0x0000ffff, %d1	# zero any remainder
ddadj0:

# now test the trial quotient and adjust. This step plus the
# normalization assures (according to Knuth) that the trial
# quotient will be at worst 1 too large.
	mov.l		%d6, -(%sp)
	clr.w		%d6			# word u3 left
	swap		%d6			# in lsw position
ddadj1: mov.l		%d7, %d3
	mov.l		%d1, %d2
	mulu.w		%d7, %d2		# V2q
	swap		%d3
	mulu.w		%d1, %d3		# V1q
	mov.l		%d5, %d4		# U1U2
	sub.l		%d3, %d4		# U1U2 - V1q

	swap		%d4

	mov.w		%d4,%d0
	mov.w		%d6,%d4			# insert lower word (U3)

	tst.w		%d0			# is upper word set?
	bne.w		ddadjd1

#	add.l		%d6, %d4		# (U1U2 - V1q) + U3

	cmp.l	 	%d2, %d4
	bls.b		ddadjd1			# is V2q > (U1U2-V1q) + U3 ?
	subq.l		&0x1, %d1		# yes, decrement and recheck
	bra.b		ddadj1
ddadjd1:
# now test the word by multiplying it by the divisor (V1V2) and comparing
# the 3 digit (word) result with the current dividend words
	mov.l		%d5, -(%sp)		# save %d5 (%d6 already saved)
	mov.l		%d1, %d6
	swap		%d6			# shift answer to ms 3 words
	mov.l		%d7, %d5
	bsr.l		dmm2
	mov.l		%d5, %d2		# now %d2,%d3 are trial*divisor
	mov.l		%d6, %d3
	mov.l		(%sp)+, %d5		# restore dividend
	mov.l		(%sp)+, %d6
	sub.l		%d3, %d6
	subx.l		%d2, %d5		# subtract double precision
	bcc		dd2nd			# no carry, do next quotient digit
	subq.l		&0x1, %d1		# q is one too large
# need to add back divisor longword to current ms 3 digits of dividend
# - according to Knuth, this is done only 2 out of 65536 times for random
# divisor, dividend selection.
	clr.l		%d2
	mov.l		%d7, %d3
	swap		%d3
	clr.w		%d3			# %d3 now ls word of divisor
	add.l		%d3, %d6		# aligned with 3rd word of dividend
	addx.l		%d2, %d5
	mov.l		%d7, %d3
	clr.w		%d3			# %d3 now ms word of divisor
	swap		%d3			# aligned with 2nd word of dividend
	add.l		%d3, %d5
dd2nd:
	tst.b		DDSECOND(%a6)		# both q words done?
	bne.b		ddremain
# first quotient digit now correct. store digit and shift the
# (subtracted) dividend 
	mov.w		%d1, DDQUOTIENT(%a6)
	clr.l		%d1
	swap		%d5
	swap		%d6
	mov.w		%d6, %d5
	clr.w		%d6
	st		DDSECOND(%a6)		# second digit
	bra.w		ddnormalized
ddremain:
# add 2nd word to quotient, get the remainder.
	mov.w 		%d1, DDQUOTIENT+2(%a6)
# shift down one word/digit to renormalize remainder.
	mov.w		%d5, %d6
	swap		%d6
	swap		%d5
	mov.l		DDNORMAL(%a6), %d7	# get norm shift count
	beq.b		ddrn
	subq.l		&0x1, %d7		# set for loop count
ddnlp:
	lsr.l		&0x1, %d5		# shift into %d6
	roxr.l		&0x1, %d6
	dbf		%d7, ddnlp
ddrn:
	mov.l		%d6, %d5		# remainder
	mov.l		DDQUOTIENT(%a6), %d6 	# quotient

	rts
dmm2:
# factors for the 32X32->64 multiplication are in %d5 and %d6.
# returns 64 bit result in %d5 (hi) %d6(lo).
# destroys %d2,%d3,%d4.

# multiply hi,lo words of each factor to get 4 intermediate products
	mov.l		%d6, %d2
	mov.l		%d6, %d3
	mov.l		%d5, %d4
	swap		%d3
	swap		%d4
	mulu.w		%d5, %d6		# %d6 <- lsw*lsw
	mulu.w		%d3, %d5		# %d5 <- msw-dest*lsw-source
	mulu.w		%d4, %d2		# %d2 <- msw-source*lsw-dest
	mulu.w		%d4, %d3		# %d3 <- msw*msw
# now use swap and addx to consolidate to two longwords
	clr.l		%d4
	swap		%d6
	add.w		%d5, %d6		# add msw of l*l to lsw of m*l product
	addx.w		%d4, %d3		# add any carry to m*m product
	add.w		%d2, %d6		# add in lsw of other m*l product
	addx.w		%d4, %d3		# add any carry to m*m product
	swap		%d6			# %d6 is low 32 bits of final product
	clr.w		%d5
	clr.w		%d2			# lsw of two mixed products used,
	swap		%d5			# now use msws of longwords
	swap		%d2
	add.l		%d2, %d5				
	add.l		%d3, %d5		# %d5 now ms 32 bits of final product
	rts

##########
dcontrolmodel_s:
	movq.l		&LONG,%d0
	bsr.l		_calc_ea		# calc <ea>

	cmpi.b		SPCOND_FLG(%a6),&immed_flg # immediate addressing mode?
	beq.b		dimmed			# yes

	mov.l		%a0,%a2
	bsr.l		_dmem_read_long		# fetch divisor from <ea>

	tst.l		%d1			# dfetch error?
	bne.b		div64_err		# yes

	mov.l		%d0, %d7
	bra.w		dgotsrcl

# we have to split out immediate data here because it must be read using
# imem_read() instead of dmem_read(). this becomes especially important
# if the fetch runs into some deadly fault.
dimmed:
	addq.l		&0x4,EXC_EXTWPTR(%a6)
	bsr.l		_imem_read_long		# read immediate value

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.l		%d0,%d7
	bra.w		dgotsrcl

##########

# if dmem_read_long() returns a fail message in d1, the package
# must create an access error frame. here, we pass a skeleton fslw
# and the failing address to the routine that creates the new frame.
# also, we call isp_restore in case the effective addressing mode was
# (an)+ or -(an) in which case the previous "an" value must be restored.
# FSLW:
# 	read = true
# 	size = longword
#	TM = data
# 	software emulation error = true
div64_err:
	bsr.l		isp_restore		# restore addr reg
	mov.l		%a2,%a0			# pass failing address
	mov.l		&0x01010001,%d0		# pass fslw
	bra.l		isp_dacc

#########################################################################
# XDEF ****************************************************************	#
#	_mul64(): routine to emulate mul{u,s}.l <ea>,Dh:Dl 32x32->64	#
#									#
# XREF ****************************************************************	#
#	_calc_ea() - calculate effective address			#
#	isp_iacc() - handle instruction access error exception		#
# 	isp_dacc() - handle data access error exception			#
#	isp_restore() - restore An on access error w/ -() or ()+	#
#									#
# INPUT ***************************************************************	#
#	none								#
#									#
# OUTPUT **************************************************************	#
# 	If exiting through isp_dacc...					#
#		a0 = failing address					#
#		d0 = FSLW						#
# 	else								#
#		none							#
#									#
# ALGORITHM ***********************************************************	#
#	First, decode the operand location. If it's in Dn, fetch from	#
# the stack. If it's in memory, use _calc_ea() to calculate the		#
# effective address. Use _dmem_read_long() to fetch at that address.	#
# Unless the operand is immediate data. Then use _imem_read_long().	#
# Send failures to isp_dacc() or isp_iacc() as appropriate.		#
#	If the operands are signed, make them unsigned and save the 	#
# sign info for later. Perform the multiplication using 16x16->32	#
# unsigned multiplies and "add" instructions. Store the high and low 	#
# portions of the result in the appropriate data registers on the	#
# stack. Calculate the condition codes, also.				#
#									#
#########################################################################

#############
# mul(u,s)l #
#############
	global		_mul64
_mul64:
	mov.b		EXC_OPWORD+1(%a6), %d0	# extract src {mode,reg}
	cmpi.b		%d0, &0x7		# is src mode Dn or other?
	bgt.w		mul64_memop		# src is in memory

# multiplier operand in the data register file.
# must extract the register number and fetch the operand from the stack.
mul64_regop:
	andi.w		&0x7, %d0		# extract Dn
	mov.l		(EXC_DREGS,%a6,%d0.w*4), %d3 # fetch multiplier

# multiplier is in %d3. now, extract Dl and Dh fields and fetch the
# multiplicand from the data register specified by Dl.
mul64_multiplicand:
	mov.w		EXC_EXTWORD(%a6), %d2	# fetch ext word
	clr.w		%d1			# clear Dh reg
	mov.b		%d2, %d1		# grab Dh
	rol.w		&0x4, %d2		# align Dl byte
	andi.w		&0x7, %d2		# extract Dl

	mov.l		(EXC_DREGS,%a6,%d2.w*4), %d4 # get multiplicand

# check for the case of "zero" result early
	tst.l		%d4			# test multiplicand
	beq.w		mul64_zero		# handle zero separately
	tst.l		%d3			# test multiplier
	beq.w		mul64_zero		# handle zero separately

# multiplier is in %d3 and multiplicand is in %d4.
# if the operation is to be signed, then the operands are converted
# to unsigned and the result sign is saved for the end.
	clr.b		EXC_TEMP(%a6)		# clear temp space
	btst		&0x3, EXC_EXTWORD(%a6)	# signed or unsigned?
	beq.b		mul64_alg		# unsigned; skip sgn calc

	tst.l		%d3			# is multiplier negative?
	bge.b		mul64_chk_md_sgn	# no
	neg.l		%d3			# make multiplier positive
	ori.b		&0x1, EXC_TEMP(%a6)	# save multiplier sgn

# the result sign is the exclusive or of the operand sign bits.
mul64_chk_md_sgn:
	tst.l		%d4			# is multiplicand negative?
	bge.b		mul64_alg		# no	
	neg.l		%d4			# make multiplicand positive
	eori.b		&0x1, EXC_TEMP(%a6)	# calculate correct sign

#########################################################################
#	63			   32				0	#
# 	----------------------------					#
# 	| hi(mplier) * hi(mplicand)|					#
# 	----------------------------					#
#		     -----------------------------			#
#		     | hi(mplier) * lo(mplicand) |			#
#		     -----------------------------			#
#		     -----------------------------			#
#		     | lo(mplier) * hi(mplicand) |			#
#		     -----------------------------			#
#	  |			   -----------------------------	#
#	--|--			   | lo(mplier) * lo(mplicand) |	#
#	  |			   -----------------------------	#
#	========================================================	#
#	--------------------------------------------------------	#
#	|	hi(result)	   |	    lo(result)         |	#
#	--------------------------------------------------------	#
#########################################################################
mul64_alg:
# load temp registers with operands
	mov.l		%d3, %d5		# mr in %d5
	mov.l		%d3, %d6		# mr in %d6
	mov.l		%d4, %d7		# md in %d7
	swap		%d6			# hi(mr) in lo %d6
	swap		%d7			# hi(md) in lo %d7

# complete necessary multiplies:
	mulu.w		%d4, %d3		# [1] lo(mr) * lo(md)
	mulu.w		%d6, %d4		# [2] hi(mr) * lo(md)
	mulu.w		%d7, %d5		# [3] lo(mr) * hi(md)
	mulu.w		%d7, %d6		# [4] hi(mr) * hi(md)

# add lo portions of [2],[3] to hi portion of [1].
# add carries produced from these adds to [4].
# lo([1]) is the final lo 16 bits of the result.
	clr.l		%d7			# load %d7 w/ zero value
	swap		%d3			# hi([1]) <==> lo([1])
	add.w		%d4, %d3		# hi([1]) + lo([2])
	addx.l		%d7, %d6		#    [4]  + carry
	add.w		%d5, %d3		# hi([1]) + lo([3])
	addx.l		%d7, %d6		#    [4]  + carry
	swap		%d3			# lo([1]) <==> hi([1])

# lo portions of [2],[3] have been added in to final result.
# now, clear lo, put hi in lo reg, and add to [4]
	clr.w		%d4			# clear lo([2])
	clr.w		%d5			# clear hi([3])
	swap		%d4			# hi([2]) in lo %d4
	swap		%d5			# hi([3]) in lo %d5
	add.l		%d5, %d4		#    [4]  + hi([2])
	add.l		%d6, %d4		#    [4]  + hi([3])

# unsigned result is now in {%d4,%d3}
	tst.b		EXC_TEMP(%a6)		# should result be signed?
	beq.b		mul64_done		# no

# result should be a signed negative number.
# compute 2's complement of the unsigned number:
#   -negate all bits and add 1
mul64_neg:
	not.l		%d3			# negate lo(result) bits
	not.l		%d4			# negate hi(result) bits
	addq.l		&1, %d3			# add 1 to lo(result)
	addx.l		%d7, %d4		# add carry to hi(result)

# the result is saved to the register file.
# for '040 compatibility, if Dl == Dh then only the hi(result) is
# saved. so, saving hi after lo accomplishes this without need to
# check Dl,Dh equality.
mul64_done:
	mov.l		%d3, (EXC_DREGS,%a6,%d2.w*4) # save lo(result)
	mov.w		&0x0, %cc
	mov.l		%d4, (EXC_DREGS,%a6,%d1.w*4) # save hi(result)

# now, grab the condition codes. only one that can be set is 'N'.
# 'N' CAN be set if the operation is unsigned if bit 63 is set.
	mov.w		%cc, %d7		# fetch %ccr to see if 'N' set
	andi.b		&0x8, %d7		# extract 'N' bit

mul64_ccode_set:
	mov.b		EXC_CC+1(%a6), %d6 	# fetch previous %ccr
	andi.b		&0x10, %d6		# all but 'X' bit changes

	or.b		%d7, %d6		# group 'X' and 'N'
	mov.b		%d6, EXC_CC+1(%a6)	# save new %ccr

	rts

# one or both of the operands is zero so the result is also zero.
# save the zero result to the register file and set the 'Z' ccode bit.
mul64_zero:
	clr.l		(EXC_DREGS,%a6,%d2.w*4) # save lo(result)
	clr.l		(EXC_DREGS,%a6,%d1.w*4) # save hi(result)

	movq.l		&0x4, %d7		# set 'Z' ccode bit
	bra.b		mul64_ccode_set		# finish ccode set

##########

# multiplier operand is in memory at the effective address.
# must calculate the <ea> and go fetch the 32-bit operand.
mul64_memop:
	movq.l		&LONG, %d0		# pass # of bytes
	bsr.l		_calc_ea		# calculate <ea>

	cmpi.b		SPCOND_FLG(%a6),&immed_flg # immediate addressing mode?
	beq.b		mul64_immed		# yes

	mov.l		%a0,%a2
	bsr.l		_dmem_read_long		# fetch src from addr (%a0)

	tst.l		%d1			# dfetch error?
	bne.w		mul64_err		# yes

	mov.l		%d0, %d3		# store multiplier in %d3

	bra.w		mul64_multiplicand

# we have to split out immediate data here because it must be read using
# imem_read() instead of dmem_read(). this becomes especially important
# if the fetch runs into some deadly fault.
mul64_immed:
	addq.l		&0x4,EXC_EXTWPTR(%a6)
	bsr.l		_imem_read_long		# read immediate value

	tst.l		%d1			# ifetch error?
	bne.l		isp_iacc		# yes

	mov.l		%d0,%d3
	bra.w		mul64_multiplicand

##########

# if dmem_read_long() returns a fail message in d1, the package
# must create an access error frame. here, we pass a skeleton fslw
# and the failing address to the routine that creates the new frame.
# also, we call isp_restore in case the effective addressing mode was
# (an)+ or -(an) in which case the previous "an" value must be restored.
# FSLW:
# 	read = true
# 	size = longword
#	TM = data
# 	software emulation error = true
mul64_err:
	bsr.l		isp_restore		# restore addr reg
	mov.l		%a2,%a0			# pass failing address
	mov.l		&0x01010001,%d0		# pass fslw
	bra.l		isp_dacc

#########################################################################
# XDEF ****************************************************************	#
#	_compandset2(): routine to emulate cas2()			#
#			(internal to package)				#
#									#
#	_isp_cas2_finish(): store ccodes, store compare regs		#
#			    (external to package)			#
#									#
# XREF ****************************************************************	#
#	_real_lock_page() - "callout" to lock op's page from page-outs	#
#	_cas_terminate2() - access error exit				#
#	_real_cas2() - "callout" to core cas2 emulation code		#
#	_real_unlock_page() - "callout" to unlock page			#
#									#
# INPUT ***************************************************************	#
# _compandset2():							#
#	d0 = instruction extension word					#
#									#
# _isp_cas2_finish():							#
#	see cas2 core emulation code					#
# 									#
# OUTPUT **************************************************************	#
# _compandset2():							#
#	see cas2 core emulation code					#
#									#
# _isp_cas_finish():							#
#	None (register file or memroy changed as appropriate)		#
#									#
# ALGORITHM ***********************************************************	#
# compandset2():							#
#	Decode the instruction and fetch the appropriate Update and	#
# Compare operands. Then call the "callout" _real_lock_page() for each	#
# memory operand address so that the operating system can keep these	#
# pages from being paged out. If either _real_lock_page() fails, exit	#
# through _cas_terminate2(). Don't forget to unlock the 1st locked page	#
# using _real_unlock_paged() if the 2nd lock-page fails.		#
# Finally, branch to the core cas2 emulation code by calling the 	#
# "callout" _real_cas2().						#
#									#
# _isp_cas2_finish():							#
#	Re-perform the comparison so we can determine the condition	#
# codes which were too much trouble to keep around during the locked	#
# emulation. Then unlock each operands page by calling the "callout"	#
# _real_unlock_page().							#
#									#
#########################################################################

set ADDR1,	EXC_TEMP+0xc
set ADDR2,	EXC_TEMP+0x0
set DC2,	EXC_TEMP+0xa
set DC1,	EXC_TEMP+0x8

	global		_compandset2
_compandset2:
	mov.l		%d0,EXC_TEMP+0x4(%a6)		# store for possible restart
	mov.l		%d0,%d1			# extension word in d0

	rol.w		&0x4,%d0
	andi.w		&0xf,%d0		# extract Rn2
	mov.l		(EXC_DREGS,%a6,%d0.w*4),%a1 # fetch ADDR2
	mov.l		%a1,ADDR2(%a6)

	mov.l		%d1,%d0

	lsr.w		&0x6,%d1
	andi.w		&0x7,%d1		# extract Du2
	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d5 # fetch Update2 Op

	andi.w		&0x7,%d0		# extract Dc2
	mov.l		(EXC_DREGS,%a6,%d0.w*4),%d3 # fetch Compare2 Op
	mov.w		%d0,DC2(%a6)

	mov.w		EXC_EXTWORD(%a6),%d0
	mov.l		%d0,%d1

	rol.w		&0x4,%d0
	andi.w		&0xf,%d0		# extract Rn1
	mov.l		(EXC_DREGS,%a6,%d0.w*4),%a0 # fetch ADDR1
	mov.l		%a0,ADDR1(%a6)

	mov.l		%d1,%d0

	lsr.w		&0x6,%d1
	andi.w		&0x7,%d1		# extract Du1
	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d4 # fetch Update1 Op
	
	andi.w		&0x7,%d0		# extract Dc1
	mov.l		(EXC_DREGS,%a6,%d0.w*4),%d2 # fetch Compare1 Op
	mov.w		%d0,DC1(%a6)

	btst		&0x1,EXC_OPWORD(%a6)	# word or long?
	sne		%d7

	btst		&0x5,EXC_ISR(%a6)	# user or supervisor?
	sne		%d6

	mov.l		%a0,%a2
	mov.l		%a1,%a3

	mov.l		%d7,%d1			# pass size
	mov.l		%d6,%d0			# pass mode
	bsr.l		_real_lock_page		# lock page
	mov.l		%a2,%a0
	tst.l		%d0			# error?
	bne.l		_cas_terminate2		# yes

	mov.l		%d7,%d1			# pass size
	mov.l		%d6,%d0			# pass mode
	mov.l		%a3,%a0			# pass addr
	bsr.l		_real_lock_page		# lock page
	mov.l		%a3,%a0
	tst.l		%d0			# error?
	bne.b		cas_preterm		# yes

	mov.l		%a2,%a0
	mov.l		%a3,%a1

	bra.l		_real_cas2

# if the 2nd lock attempt fails, then we must still unlock the 
# first page(s).
cas_preterm:
	mov.l		%d0,-(%sp)		# save FSLW
	mov.l		%d7,%d1			# pass size
	mov.l		%d6,%d0			# pass mode
	mov.l		%a2,%a0			# pass ADDR1
	bsr.l		_real_unlock_page	# unlock first page(s)
	mov.l		(%sp)+,%d0		# restore FSLW
	mov.l		%a3,%a0			# pass failing addr
	bra.l		_cas_terminate2

#############################################################

	global		_isp_cas2_finish
_isp_cas2_finish:
	btst		&0x1,EXC_OPWORD(%a6)
	bne.b		cas2_finish_l

	mov.w		EXC_CC(%a6),%cc		# load old ccodes
	cmp.w		%d0,%d2
	bne.b		cas2_finish_w_save
	cmp.w		%d1,%d3
cas2_finish_w_save:
	mov.w		%cc,EXC_CC(%a6)		# save new ccodes

	tst.b		%d4			# update compare reg?
	bne.b		cas2_finish_w_done	# no

	mov.w		DC2(%a6),%d3		# fetch Dc2
	mov.w		%d1,(2+EXC_DREGS,%a6,%d3.w*4) # store new Compare2 Op

	mov.w		DC1(%a6),%d2		# fetch Dc1
	mov.w		%d0,(2+EXC_DREGS,%a6,%d2.w*4) # store new Compare1 Op

cas2_finish_w_done:
	btst		&0x5,EXC_ISR(%a6)
	sne		%d2
	mov.l		%d2,%d0			# pass mode
	sf		%d1			# pass size
	mov.l		ADDR1(%a6),%a0		# pass ADDR1
	bsr.l		_real_unlock_page	# unlock page
	
	mov.l		%d2,%d0			# pass mode
	sf		%d1			# pass size
	mov.l		ADDR2(%a6),%a0		# pass ADDR2
	bsr.l		_real_unlock_page	# unlock page
	rts

cas2_finish_l:
	mov.w		EXC_CC(%a6),%cc		# load old ccodes
	cmp.l		%d0,%d2
	bne.b		cas2_finish_l_save
	cmp.l		%d1,%d3
cas2_finish_l_save:
	mov.w		%cc,EXC_CC(%a6)		# save new ccodes

	tst.b		%d4			# update compare reg?
	bne.b		cas2_finish_l_done	# no

	mov.w		DC2(%a6),%d3		# fetch Dc2
	mov.l		%d1,(EXC_DREGS,%a6,%d3.w*4) # store new Compare2 Op

	mov.w		DC1(%a6),%d2		# fetch Dc1
	mov.l		%d0,(EXC_DREGS,%a6,%d2.w*4) # store new Compare1 Op

cas2_finish_l_done:
	btst		&0x5,EXC_ISR(%a6)
	sne		%d2
	mov.l		%d2,%d0			# pass mode
	st		%d1			# pass size
	mov.l		ADDR1(%a6),%a0		# pass ADDR1
	bsr.l		_real_unlock_page	# unlock page
	
	mov.l		%d2,%d0			# pass mode
	st		%d1			# pass size
	mov.l		ADDR2(%a6),%a0		# pass ADDR2
	bsr.l		_real_unlock_page	# unlock page
	rts

########
	global		cr_cas2
cr_cas2:
	mov.l		EXC_TEMP+0x4(%a6),%d0
	bra.w		_compandset2

#########################################################################
# XDEF ****************************************************************	#
#	_compandset(): routine to emulate cas w/ misaligned <ea>	#
#		       (internal to package)				#
#	_isp_cas_finish(): routine called when cas emulation completes	#
#			   (external and internal to package)		#
#	_isp_cas_restart(): restart cas emulation after a fault		#
#			    (external to package)			#
#	_isp_cas_terminate(): create access error stack frame on fault	#
#			      (external and internal to package)	#
#	_isp_cas_inrange(): checks whether instr addr is within range	#
#			    of core cas/cas2emulation code		#
#			    (external to package)			#
#									#
# XREF ****************************************************************	#
# 	_calc_ea(): calculate effective address				#
#									#
# INPUT ***************************************************************	#
# compandset():								#
# 	none								#
# _isp_cas_restart():							#
#	d6 = previous sfc/dfc						#
# _isp_cas_finish():							#
# _isp_cas_terminate():							#
#	a0 = failing address						#
#	d0 = FSLW							#
#	d6 = previous sfc/dfc						#
# _isp_cas_inrange():							#
#	a0 = instruction address to be checked				#
#									#
# OUTPUT **************************************************************	#
# compandset():								#
#		none							#
# _isp_cas_restart():							#
#	a0 = effective address						#
#	d7 = word or longword flag					#
# _isp_cas_finish():							#
#	a0 = effective address						#
# _isp_cas_terminate():							#
#	initial register set before emulation exception			#
# _isp_cas_inrange():							#
#	d0 = 0 => in range; -1 => out of range				#
#									#
# ALGORITHM ***********************************************************	#
#									#
# compandset():								#
#	First, calculate the effective address. Then, decode the 	#
# instruction word and fetch the "compare" (DC) and "update" (Du)	#
# operands.								#
# 	Next, call the external routine _real_lock_page() so that the	#
# operating system can keep this page from being paged out while we're	#
# in this routine. If this call fails, jump to _cas_terminate2().	#
#	The routine then branches to _real_cas(). This external routine	#
# that actually emulates cas can be supplied by the external os or	#
# made to point directly back into the 060ISP which has a routine for	#
# this purpose.								#
#									#
# _isp_cas_finish():							#
# 	Either way, after emulation, the package is re-entered at	#
# _isp_cas_finish(). This routine re-compares the operands in order to	#
# set the condition codes. Finally, these routines will call		#
# _real_unlock_page() in order to unlock the pages that were previously	#
# locked.								#
#									#
# _isp_cas_restart():							#
#	This routine can be entered from an access error handler where	#
# the emulation sequence should be re-started from the beginning.	#
#									#
# _isp_cas_terminate():							#
#	This routine can be entered from an access error handler where	#
# an emulation operand access failed and the operating system would	#
# like an access error stack frame created instead of the current 	#
# unimplemented integer instruction frame.				#
# 	Also, the package enters here if a call to _real_lock_page()	#
# fails.								#
#									#
# _isp_cas_inrange():							#
# 	Checks to see whether the instruction address passed to it in	#
# a0 is within the software package cas/cas2 emulation routines. This	#
# can be helpful for an operating system to determine whether an access	#
# error during emulation was due to a cas/cas2 emulation access.	#
#									#
#########################################################################

set DC,		EXC_TEMP+0x8
set ADDR,	EXC_TEMP+0x4

	global		_compandset
_compandset:
	btst		&0x1,EXC_OPWORD(%a6)	# word or long operation?
	bne.b		compandsetl		# long	

compandsetw:
	movq.l		&0x2,%d0		# size = 2 bytes
	bsr.l		_calc_ea		# a0 = calculated <ea>	
	mov.l		%a0,ADDR(%a6)		# save <ea> for possible restart
	sf		%d7			# clear d7 for word size
	bra.b		compandsetfetch

compandsetl:
	movq.l		&0x4,%d0		# size = 4 bytes
	bsr.l		_calc_ea		# a0 = calculated <ea>	
	mov.l		%a0,ADDR(%a6)		# save <ea> for possible restart
	st		%d7			# set d7 for longword size

compandsetfetch:
	mov.w		EXC_EXTWORD(%a6),%d0	# fetch cas extension word
	mov.l		%d0,%d1			# make a copy

	lsr.w		&0x6,%d0
	andi.w		&0x7,%d0		# extract Du
	mov.l		(EXC_DREGS,%a6,%d0.w*4),%d2 # get update operand

	andi.w		&0x7,%d1		# extract Dc
	mov.l		(EXC_DREGS,%a6,%d1.w*4),%d4 # get compare operand
	mov.w		%d1,DC(%a6)		# save Dc

	btst		&0x5,EXC_ISR(%a6)	# which mode for exception?
	sne		%d6			# set on supervisor mode

	mov.l		%a0,%a2			# save temporarily
	mov.l		%d7,%d1			# pass size
	mov.l		%d6,%d0			# pass mode
	bsr.l		_real_lock_page		# lock page
	tst.l		%d0			# did error occur?
	bne.w		_cas_terminate2		# yes, clean up the mess
	mov.l		%a2,%a0			# pass addr in a0
	
	bra.l		_real_cas

########
	global		_isp_cas_finish
_isp_cas_finish:
	btst		&0x1,EXC_OPWORD(%a6)
	bne.b		cas_finish_l

# just do the compare again since it's faster than saving the ccodes
# from the locked routine...
cas_finish_w:
	mov.w		EXC_CC(%a6),%cc		# restore cc
	cmp.w	 	%d0,%d4			# do word compare
	mov.w		%cc,EXC_CC(%a6)		# save cc

	tst.b		%d1			# update compare reg?
	bne.b		cas_finish_w_done	# no

	mov.w		DC(%a6),%d3
	mov.w		%d0,(EXC_DREGS+2,%a6,%d3.w*4) # Dc = destination

cas_finish_w_done:
	mov.l		ADDR(%a6),%a0		# pass addr
	sf		%d1			# pass size
	btst		&0x5,EXC_ISR(%a6)
	sne		%d0			# pass mode
	bsr.l		_real_unlock_page	# unlock page
	rts

# just do the compare again since it's faster than saving the ccodes
# from the locked routine...
cas_finish_l:
	mov.w		EXC_CC(%a6),%cc		# restore cc
	cmp.l	 	%d0,%d4			# do longword compare
	mov.w		%cc,EXC_CC(%a6)		# save cc

	tst.b		%d1			# update compare reg?
	bne.b		cas_finish_l_done	# no

	mov.w		DC(%a6),%d3
	mov.l		%d0,(EXC_DREGS,%a6,%d3.w*4) # Dc = destination

cas_finish_l_done:
	mov.l		ADDR(%a6),%a0		# pass addr
	st		%d1			# pass size
	btst		&0x5,EXC_ISR(%a6)
	sne		%d0			# pass mode
	bsr.l		_real_unlock_page	# unlock page
	rts

########
	
	global		_isp_cas_restart
_isp_cas_restart:
	mov.l		%d6,%sfc		# restore previous sfc
	mov.l		%d6,%dfc		# restore previous dfc

	cmpi.b		EXC_OPWORD+1(%a6),&0xfc	# cas or cas2?
	beq.l		cr_cas2			# cas2
cr_cas:
	mov.l		ADDR(%a6),%a0		# load <ea>
	btst		&0x1,EXC_OPWORD(%a6)	# word or long operation?
	sne		%d7			# set d7 accordingly
	bra.w		compandsetfetch	

########

# At this stage, it would be nice if d0 held the FSLW.
	global		_isp_cas_terminate
_isp_cas_terminate:
	mov.l		%d6,%sfc		# restore previous sfc
	mov.l		%d6,%dfc		# restore previous dfc

	global		_cas_terminate2
_cas_terminate2:
	mov.l		%a0,%a2			# copy failing addr to a2

	mov.l		%d0,-(%sp)
	bsr.l		isp_restore		# restore An (if ()+ or -())
	mov.l		(%sp)+,%d0

	addq.l		&0x4,%sp		# remove sub return addr
	subq.l		&0x8,%sp		# make room for bigger stack
	subq.l		&0x8,%a6		# shift frame ptr down, too
	mov.l		&26,%d1			# want to move 51 longwords
	lea		0x8(%sp),%a0		# get address of old stack
	lea		0x0(%sp),%a1		# get address of new stack
cas_term_cont:
	mov.l		(%a0)+,(%a1)+		# move a longword
	dbra.w		%d1,cas_term_cont	# keep going

	mov.w		&0x4008,EXC_IVOFF(%a6)	# put new stk fmt, voff
	mov.l		%a2,EXC_IVOFF+0x2(%a6)	# put faulting addr on stack
	mov.l		%d0,EXC_IVOFF+0x6(%a6)	# put FSLW on stack
	movm.l		EXC_DREGS(%a6),&0x3fff	# restore user regs
	unlk		%a6			# unlink stack frame
	bra.l		_real_access

########

	global		_isp_cas_inrange
_isp_cas_inrange:
	clr.l		%d0			# clear return result
	lea		_CASHI(%pc),%a1		# load end of CAS core code
	cmp.l		%a1,%a0			# is PC in range?
	blt.b		cin_no			# no
	lea		_CASLO(%pc),%a1		# load begin of CAS core code
	cmp.l		%a0,%a1			# is PC in range?
	blt.b		cin_no			# no
	rts					# yes; return d0 = 0
cin_no:	
	mov.l		&-0x1,%d0		# out of range; return d0 = -1
	rts

#################################################################
#################################################################
#################################################################
# This is the start of the cas and cas2 "core" emulation code.	#
# This is the section that may need to be replaced by the host	#
# OS if it is too operating system-specific.			#
# Please refer to the package documentation to see how to	#
# "replace" this section, if necessary.				#
#################################################################
#################################################################
#################################################################

#       ######      ##      ######     ####
#       #	   #  #     #         #    #
#	#	  ######    ######        #
#	#	  #    #         #      #
#       ######    #    #    ######    ######

#########################################################################
# XDEF ****************************************************************	#
#	_isp_cas2(): "core" emulation code for the cas2 instruction	#
#									#
# XREF ****************************************************************	#
#	_isp_cas2_finish() - only exit point for this emulation code;	#
#			     do clean-up; calculate ccodes; store 	#
#			     Compare Ops if appropriate.		#
#									#
# INPUT ***************************************************************	#
#	*see chart below*						#
# 									#
# OUTPUT **************************************************************	#
#	*see chart below*						#
#									#
# ALGORITHM ***********************************************************	#
#	(1) Make several copies of the effective address.		#
#	(2) Save current SR; Then mask off all maskable interrupts.	#
#	(3) Save current SFC/DFC (ASSUMED TO BE EQUAL!!!); Then set 	#
#	    according to whether exception occurred in user or 		#
#	    supervisor mode.						#
#	(4) Use "plpaw" instruction to pre-load ATC with effective	#
#	    address pages(s). THIS SHOULD NOT FAULT!!! The relevant	#
#	    page(s) should have already been made resident prior to	#
# 	    entering this routine.					#
#	(5) Push the operand lines from the cache w/ "cpushl". 		#
#	    In the 68040, this was done within the locked region. In	#
# 	    the 68060, it is done outside of the locked region.		#
#	(6) Use "plpar" instruction to do a re-load of ATC entries for	#
#	    ADDR1 since ADDR2 entries may have pushed ADDR1 out of the	#
#	    ATC.							#
#	(7) Pre-fetch the core emulation instructions by executing	#
#	    one branch within each physical line (16 bytes) of the code	#
#	    before actually executing the code.				#
#	(8) Load the BUSCR w/ the bus lock value.			#
#	(9) Fetch the source operands using "moves".			#
#	(10)Do the compares. If both equal, go to step (13).		#
#	(11)Unequal. No update occurs. But, we do write the DST1 op	#
#	    back to itself (as w/ the '040) so we can gracefully unlock	#
#	    the bus (and assert LOCKE*) using BUSCR and the final move.	#
#	(12)Exit.							#
#	(13)Write update operand to the DST locations. Use BUSCR to 	#
#	    assert LOCKE* for the final write operation.		#
#	(14)Exit.							#
#									#
# 	The algorithm is actually implemented slightly differently	#
# depending on the size of the operation and the misalignment of the 	#
# operands. A misaligned operand must be written in aligned chunks or	#
# else the BUSCR register control gets confused.			#
#									#
#########################################################################

#################################################################
# THIS IS THE STATE OF THE INTEGER REGISTER FILE UPON		# 
# ENTERING _isp_cas2().						#
#								#
# D0 = xxxxxxxx							#
# D1 = xxxxxxxx							#
# D2 = cmp operand 1						#
# D3 = cmp operand 2						#
# D4 = update oper 1						#
# D5 = update oper 2						#
# D6 = 'xxxxxxff if supervisor mode; 'xxxxxx00 if user mode	#
# D7 = 'xxxxxxff if longword operation; 'xxxxxx00 if word 	#
# A0 = ADDR1							#
# A1 = ADDR2							#
# A2 = xxxxxxxx							#
# A3 = xxxxxxxx							#
# A4 = xxxxxxxx							#
# A5 = xxxxxxxx							#
# A6 = frame pointer						#
# A7 = stack pointer						#
#################################################################

#	align		0x1000
# beginning label used by _isp_cas_inrange()
	global		_CASLO
_CASLO:

	global		_isp_cas2
_isp_cas2:
	tst.b		%d6			# user or supervisor mode?
	bne.b		cas2_supervisor		# supervisor
cas2_user:
	movq.l		&0x1,%d0		# load user data fc
	bra.b		cas2_cont
cas2_supervisor:
	movq.l		&0x5,%d0		# load supervisor data fc
cas2_cont:
	tst.b		%d7			# word or longword?
	beq.w		cas2w			# word

####
cas2l:
	mov.l		%a0,%a2			# copy ADDR1
	mov.l		%a1,%a3			# copy ADDR2
	mov.l		%a0,%a4			# copy ADDR1
	mov.l		%a1,%a5			# copy ADDR2

	addq.l		&0x3,%a4		# ADDR1+3
	addq.l		&0x3,%a5		# ADDR2+3
	mov.l		%a2,%d1			# ADDR1

# mask interrupts levels 0-6. save old mask value.
	mov.w		%sr,%d7			# save current SR
	ori.w		&0x0700,%sr		# inhibit interrupts

# load the SFC and DFC with the appropriate mode.
	movc		%sfc,%d6		# save old SFC/DFC
	movc		%d0,%sfc		# store new SFC
	movc		%d0,%dfc		# store new DFC

# pre-load the operand ATC. no page faults should occur here because
# _real_lock_page() should have taken care of this.
	plpaw		(%a2)			# load atc for ADDR1
	plpaw		(%a4)			# load atc for ADDR1+3
	plpaw		(%a3)			# load atc for ADDR2
	plpaw		(%a5)			# load atc for ADDR2+3

# push the operand lines from the cache if they exist.
	cpushl		%dc,(%a2)		# push line for ADDR1
	cpushl		%dc,(%a4)		# push line for ADDR1+3
	cpushl		%dc,(%a3)		# push line for ADDR2
	cpushl		%dc,(%a5)		# push line for ADDR2+2

	mov.l		%d1,%a2			# ADDR1
	addq.l		&0x3,%d1
	mov.l		%d1,%a4			# ADDR1+3
# if ADDR1 was ATC resident before the above "plpaw" and was executed
# and it was the next entry scheduled for replacement and ADDR2
# shares the same set, then the "plpaw" for ADDR2 can push the ADDR1
# entries from the ATC. so, we do a second set of "plpa"s.
	plpar		(%a2)			# load atc for ADDR1
	plpar		(%a4)			# load atc for ADDR1+3

# load the BUSCR values.
	mov.l		&0x80000000,%a2		# assert LOCK* buscr value
	mov.l		&0xa0000000,%a3		# assert LOCKE* buscr value
	mov.l		&0x00000000,%a4		# buscr unlock value

# there are three possible mis-aligned cases for longword cas. they
# are separated because the final write which asserts LOCKE* must
# be aligned.
	mov.l		%a0,%d0			# is ADDR1 misaligned?
	andi.b		&0x3,%d0
	beq.b		CAS2L_ENTER		# no
	cmpi.b		%d0,&0x2
	beq.w		CAS2L2_ENTER		# yes; word misaligned
	bra.w		CAS2L3_ENTER		# yes; byte misaligned

#
# D0 = dst operand 1 <-
# D1 = dst operand 2 <-
# D2 = cmp operand 1
# D3 = cmp operand 2
# D4 = update oper 1
# D5 = update oper 2
# D6 = old SFC/DFC
# D7 = old SR
# A0 = ADDR1
# A1 = ADDR2
# A2 = bus LOCK*  value
# A3 = bus LOCKE* value
# A4 = bus unlock value
# A5 = xxxxxxxx
#
	align 		0x10
CAS2L_START:
	movc		%a2,%buscr		# assert LOCK*
	movs.l		(%a1),%d1		# fetch Dest2[31:0]
	movs.l		(%a0),%d0		# fetch Dest1[31:0]
	bra.b 		CAS2L_CONT
CAS2L_ENTER:
	bra.b		~+16

CAS2L_CONT:
	cmp.l	 	%d0,%d2			# Dest1 - Compare1
	bne.b		CAS2L_NOUPDATE
	cmp.l	 	%d1,%d3			# Dest2 - Compare2
	bne.b		CAS2L_NOUPDATE
	movs.l		%d5,(%a1)		# Update2[31:0] -> DEST2
	bra.b 		CAS2L_UPDATE
	bra.b		~+16

CAS2L_UPDATE:
	movc		%a3,%buscr		# assert LOCKE*
	movs.l		%d4,(%a0)		# Update1[31:0] -> DEST1
	movc		%a4,%buscr		# unlock the bus
	bra.b		cas2l_update_done
	bra.b		~+16

CAS2L_NOUPDATE:
	movc		%a3,%buscr		# assert LOCKE*
	movs.l		%d0,(%a0)		# Dest1[31:0] -> DEST1
	movc		%a4,%buscr		# unlock the bus
	bra.b		cas2l_noupdate_done
	bra.b		~+16

CAS2L_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	bra.b		CAS2L_START

####

#################################################################
# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	# 
# ENTERING _isp_cas2().						#
#								#
# D0 = destination[31:0] operand 1				#
# D1 = destination[31:0] operand 2				#
# D2 = cmp[31:0] operand 1					#
# D3 = cmp[31:0] operand 2					#
# D4 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
# D5 = xxxxxxxx							#
# D6 = xxxxxxxx							#
# D7 = xxxxxxxx							#
# A0 = xxxxxxxx							#
# A1 = xxxxxxxx							#
# A2 = xxxxxxxx							#
# A3 = xxxxxxxx							#
# A4 = xxxxxxxx							#
# A5 = xxxxxxxx							#
# A6 = frame pointer						#
# A7 = stack pointer						#
#################################################################

cas2l_noupdate_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupt mask level.
	mov.w		%d7,%sr			# restore old SR

	sf		%d4			# indicate no update was done
	bra.l		_isp_cas2_finish

cas2l_update_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupt mask level.
	mov.w		%d7,%sr			# restore old SR

	st		%d4			# indicate update was done
	bra.l		_isp_cas2_finish
####

	align 		0x10
CAS2L2_START:
	movc		%a2,%buscr		# assert LOCK*
	movs.l		(%a1),%d1		# fetch Dest2[31:0]
	movs.l		(%a0),%d0		# fetch Dest1[31:0]
	bra.b 		CAS2L2_CONT
CAS2L2_ENTER:
	bra.b		~+16

CAS2L2_CONT:
	cmp.l	 	%d0,%d2			# Dest1 - Compare1
	bne.b		CAS2L2_NOUPDATE
	cmp.l	 	%d1,%d3			# Dest2 - Compare2
	bne.b		CAS2L2_NOUPDATE
	movs.l		%d5,(%a1)		# Update2[31:0] -> Dest2
	bra.b 		CAS2L2_UPDATE
	bra.b		~+16

CAS2L2_UPDATE:
	swap		%d4			# get Update1[31:16]
	movs.w		%d4,(%a0)+		# Update1[31:16] -> DEST1
	movc		%a3,%buscr		# assert LOCKE*
	swap		%d4			# get Update1[15:0]
	bra.b		CAS2L2_UPDATE2
	bra.b		~+16

CAS2L2_UPDATE2:
	movs.w		%d4,(%a0)		# Update1[15:0] -> DEST1+0x2
	movc		%a4,%buscr		# unlock the bus
	bra.w		cas2l_update_done
	nop
	bra.b		~+16

CAS2L2_NOUPDATE:
	swap		%d0			# get Dest1[31:16]
	movs.w		%d0,(%a0)+		# Dest1[31:16] -> DEST1
	movc		%a3,%buscr		# assert LOCKE*
	swap		%d0			# get Dest1[15:0]
	bra.b		CAS2L2_NOUPDATE2
	bra.b		~+16

CAS2L2_NOUPDATE2:
	movs.w		%d0,(%a0)		# Dest1[15:0] -> DEST1+0x2
	movc		%a4,%buscr		# unlock the bus
	bra.w		cas2l_noupdate_done
	nop
	bra.b		~+16

CAS2L2_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	bra.b		CAS2L2_START

#################################

	align 		0x10
CAS2L3_START:
	movc		%a2,%buscr		# assert LOCK*
	movs.l		(%a1),%d1		# fetch Dest2[31:0]
	movs.l		(%a0),%d0		# fetch Dest1[31:0]
	bra.b 		CAS2L3_CONT
CAS2L3_ENTER:
	bra.b		~+16

CAS2L3_CONT:
	cmp.l	 	%d0,%d2			# Dest1 - Compare1
	bne.b		CAS2L3_NOUPDATE
	cmp.l	 	%d1,%d3			# Dest2 - Compare2
	bne.b		CAS2L3_NOUPDATE
	movs.l		%d5,(%a1)		# Update2[31:0] -> DEST2
	bra.b 		CAS2L3_UPDATE
	bra.b		~+16

CAS2L3_UPDATE:
	rol.l		&0x8,%d4		# get Update1[31:24]
	movs.b		%d4,(%a0)+		# Update1[31:24] -> DEST1
	swap		%d4			# get Update1[23:8]
	movs.w		%d4,(%a0)+		# Update1[23:8] -> DEST1+0x1
	bra.b		CAS2L3_UPDATE2
	bra.b		~+16

CAS2L3_UPDATE2:
	rol.l		&0x8,%d4		# get Update1[7:0]
	movc		%a3,%buscr		# assert LOCKE*
	movs.b		%d4,(%a0)		# Update1[7:0] -> DEST1+0x3
	bra.b		CAS2L3_UPDATE3
	nop
	bra.b		~+16

CAS2L3_UPDATE3:
	movc		%a4,%buscr		# unlock the bus
	bra.w		cas2l_update_done
	nop
	nop
	nop
	bra.b		~+16
	
CAS2L3_NOUPDATE:
	rol.l		&0x8,%d0		# get Dest1[31:24]
	movs.b		%d0,(%a0)+		# Dest1[31:24] -> DEST1
	swap		%d0			# get Dest1[23:8]
	movs.w		%d0,(%a0)+		# Dest1[23:8] -> DEST1+0x1
	bra.b		CAS2L3_NOUPDATE2
	bra.b		~+16

CAS2L3_NOUPDATE2:
	rol.l		&0x8,%d0		# get Dest1[7:0]
	movc		%a3,%buscr		# assert LOCKE*
	movs.b		%d0,(%a0)		# Update1[7:0] -> DEST1+0x3
	bra.b		CAS2L3_NOUPDATE3
	nop
	bra.b		~+16

CAS2L3_NOUPDATE3:
	movc		%a4,%buscr		# unlock the bus
	bra.w		cas2l_noupdate_done
	nop
	nop
	nop
	bra.b		~+14

CAS2L3_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	bra.w		CAS2L3_START

#############################################################
#############################################################

cas2w:
	mov.l		%a0,%a2			# copy ADDR1
	mov.l		%a1,%a3			# copy ADDR2
	mov.l		%a0,%a4			# copy ADDR1
	mov.l		%a1,%a5			# copy ADDR2

	addq.l		&0x1,%a4		# ADDR1+1
	addq.l		&0x1,%a5		# ADDR2+1
	mov.l		%a2,%d1			# ADDR1

# mask interrupt levels 0-6. save old mask value.
	mov.w		%sr,%d7			# save current SR
	ori.w		&0x0700,%sr		# inhibit interrupts

# load the SFC and DFC with the appropriate mode.
	movc		%sfc,%d6		# save old SFC/DFC
	movc		%d0,%sfc		# store new SFC
	movc		%d0,%dfc		# store new DFC

# pre-load the operand ATC. no page faults should occur because
# _real_lock_page() should have taken care of this.
	plpaw		(%a2)			# load atc for ADDR1
	plpaw		(%a4)			# load atc for ADDR1+1
	plpaw		(%a3)			# load atc for ADDR2
	plpaw		(%a5)			# load atc for ADDR2+1

# push the operand cache lines from the cache if they exist.
	cpushl		%dc,(%a2)		# push line for ADDR1
	cpushl		%dc,(%a4)		# push line for ADDR1+1
	cpushl		%dc,(%a3)		# push line for ADDR2
	cpushl		%dc,(%a5)		# push line for ADDR2+1

	mov.l		%d1,%a2			# ADDR1
	addq.l		&0x3,%d1
	mov.l		%d1,%a4			# ADDR1+3
# if ADDR1 was ATC resident before the above "plpaw" and was executed
# and it was the next entry scheduled for replacement and ADDR2
# shares the same set, then the "plpaw" for ADDR2 can push the ADDR1
# entries from the ATC. so, we do a second set of "plpa"s.
	plpar		(%a2)			# load atc for ADDR1
	plpar		(%a4)			# load atc for ADDR1+3

# load the BUSCR values.
	mov.l		&0x80000000,%a2		# assert LOCK* buscr value
	mov.l		&0xa0000000,%a3		# assert LOCKE* buscr value
	mov.l		&0x00000000,%a4		# buscr unlock value

# there are two possible mis-aligned cases for word cas. they
# are separated because the final write which asserts LOCKE* must
# be aligned.
	mov.l		%a0,%d0			# is ADDR1 misaligned?
	btst		&0x0,%d0
	bne.w		CAS2W2_ENTER		# yes
	bra.b		CAS2W_ENTER		# no

#
# D0 = dst operand 1 <-
# D1 = dst operand 2 <-
# D2 = cmp operand 1
# D3 = cmp operand 2
# D4 = update oper 1
# D5 = update oper 2
# D6 = old SFC/DFC
# D7 = old SR
# A0 = ADDR1
# A1 = ADDR2
# A2 = bus LOCK*  value
# A3 = bus LOCKE* value
# A4 = bus unlock value
# A5 = xxxxxxxx
#
	align 		0x10
CAS2W_START:
	movc		%a2,%buscr		# assert LOCK*
	movs.w		(%a1),%d1		# fetch Dest2[15:0]
	movs.w		(%a0),%d0		# fetch Dest1[15:0]
	bra.b 		CAS2W_CONT2
CAS2W_ENTER:
	bra.b		~+16

CAS2W_CONT2:
	cmp.w	 	%d0,%d2			# Dest1 - Compare1
	bne.b		CAS2W_NOUPDATE
	cmp.w	 	%d1,%d3			# Dest2 - Compare2
	bne.b		CAS2W_NOUPDATE
	movs.w		%d5,(%a1)		# Update2[15:0] -> DEST2
	bra.b 		CAS2W_UPDATE
	bra.b		~+16

CAS2W_UPDATE:
	movc		%a3,%buscr		# assert LOCKE*
	movs.w		%d4,(%a0)		# Update1[15:0] -> DEST1
	movc		%a4,%buscr		# unlock the bus
	bra.b		cas2w_update_done
	bra.b		~+16

CAS2W_NOUPDATE:
	movc		%a3,%buscr		# assert LOCKE*
	movs.w		%d0,(%a0)		# Dest1[15:0] -> DEST1
	movc		%a4,%buscr		# unlock the bus
	bra.b		cas2w_noupdate_done
	bra.b		~+16

CAS2W_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	bra.b		CAS2W_START

####

#################################################################
# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	# 
# ENTERING _isp_cas2().						#
#								#
# D0 = destination[15:0] operand 1				#
# D1 = destination[15:0] operand 2				#
# D2 = cmp[15:0] operand 1					#
# D3 = cmp[15:0] operand 2					#
# D4 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
# D5 = xxxxxxxx							#
# D6 = xxxxxxxx							#
# D7 = xxxxxxxx							#
# A0 = xxxxxxxx							#
# A1 = xxxxxxxx							#
# A2 = xxxxxxxx							#
# A3 = xxxxxxxx							#
# A4 = xxxxxxxx							#
# A5 = xxxxxxxx							#
# A6 = frame pointer						#
# A7 = stack pointer						#
#################################################################

cas2w_noupdate_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupt mask level.
	mov.w		%d7,%sr			# restore old SR

	sf		%d4			# indicate no update was done
	bra.l		_isp_cas2_finish

cas2w_update_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupt mask level.
	mov.w		%d7,%sr			# restore old SR

	st		%d4			# indicate update was done
	bra.l		_isp_cas2_finish
####

	align 		0x10
CAS2W2_START:
	movc		%a2,%buscr		# assert LOCK*
	movs.w		(%a1),%d1		# fetch Dest2[15:0]
	movs.w		(%a0),%d0		# fetch Dest1[15:0]
	bra.b 		CAS2W2_CONT2
CAS2W2_ENTER:
	bra.b		~+16

CAS2W2_CONT2:
	cmp.w	 	%d0,%d2			# Dest1 - Compare1
	bne.b		CAS2W2_NOUPDATE
	cmp.w	 	%d1,%d3			# Dest2 - Compare2
	bne.b		CAS2W2_NOUPDATE
	movs.w		%d5,(%a1)		# Update2[15:0] -> DEST2
	bra.b 		CAS2W2_UPDATE
	bra.b		~+16

CAS2W2_UPDATE:
	ror.l		&0x8,%d4		# get Update1[15:8]
	movs.b		%d4,(%a0)+		# Update1[15:8] -> DEST1
	movc		%a3,%buscr		# assert LOCKE*
	rol.l		&0x8,%d4		# get Update1[7:0]
	bra.b		CAS2W2_UPDATE2
	bra.b		~+16

CAS2W2_UPDATE2:
	movs.b		%d4,(%a0)		# Update1[7:0] -> DEST1+0x1
	movc		%a4,%buscr		# unlock the bus
	bra.w		cas2w_update_done
	nop
	bra.b		~+16

CAS2W2_NOUPDATE:
	ror.l		&0x8,%d0		# get Dest1[15:8]
	movs.b		%d0,(%a0)+		# Dest1[15:8] -> DEST1
	movc		%a3,%buscr		# assert LOCKE*
	rol.l		&0x8,%d0		# get Dest1[7:0]
	bra.b		CAS2W2_NOUPDATE2
	bra.b		~+16

CAS2W2_NOUPDATE2:
	movs.b		%d0,(%a0)		# Dest1[7:0] -> DEST1+0x1
	movc		%a4,%buscr		# unlock the bus
	bra.w		cas2w_noupdate_done
	nop
	bra.b		~+16

CAS2W2_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	bra.b		CAS2W2_START

#       ######      ##      ######
#       #	   #  #     #     
#	#	  ######    ######
#	#	  #    #         #
#       ######    #    #    ######

#########################################################################
# XDEF ****************************************************************	#
# 	_isp_cas(): "core" emulation code for the cas instruction	#
#									#
# XREF ****************************************************************	#
#	_isp_cas_finish() - only exit point for this emulation code;	#
#			    do clean-up					#
#									#
# INPUT ***************************************************************	#
# 	*see entry chart below*						#
#									#
# OUTPUT **************************************************************	#
#	*see exit chart below*						#
#									#
# ALGORITHM ***********************************************************	#
# 	(1) Make several copies of the effective address. 		#
# 	(2) Save current SR; Then mask off all maskable interrupts.	#
#	(3) Save current DFC/SFC (ASSUMED TO BE EQUAL!!!); Then set	#
#	    SFC/DFC according to whether exception occurred in user or	#
#	    supervisor mode.						#
#	(4) Use "plpaw" instruction to pre-load ATC with effective	#
#	    address page(s). THIS SHOULD NOT FAULT!!! The relevant	#
# 	    page(s) should have been made resident prior to entering 	#
#	    this routine.						#
#	(5) Push the operand lines from the cache w/ "cpushl".		#
#	    In the 68040, this was done within the locked region. In	#
#	    the 68060, it is done outside of the locked region.		#
#	(6) Pre-fetch the core emulation instructions by executing one	#
#	    branch within each physical line (16 bytes) of the code	#
#	    before actually executing the code.				#
#	(7) Load the BUSCR with the bus lock value.			#
#	(8) Fetch the source operand.					#
#	(9) Do the compare. If equal, go to step (12).			#
#	(10)Unequal. No update occurs. But, we do write the DST op back	#
#	    to itself (as w/ the '040) so we can gracefully unlock	#
#	    the bus (and assert LOCKE*) using BUSCR and the final move.	#
#	(11)Exit.							#
#	(12)Write update operand to the DST location. Use BUSCR to	#
#	    assert LOCKE* for the final write operation.		#
#	(13)Exit.							#
# 									#
# 	The algorithm is actually implemented slightly differently	#
# depending on the size of the operation and the misalignment of the	#
# operand. A misaligned operand must be written in aligned chunks or	#
# else the BUSCR register control gets confused.			#
#									#
#########################################################################

#########################################################
# THIS IS THE STATE OF THE INTEGER REGISTER FILE UPON	#
# ENTERING _isp_cas().					#
#							#
# D0 = xxxxxxxx						#
# D1 = xxxxxxxx						#
# D2 = update operand					#
# D3 = xxxxxxxx						#
# D4 = compare operand					#
# D5 = xxxxxxxx						#
# D6 = supervisor ('xxxxxxff) or user mode ('xxxxxx00)	#
# D7 = longword ('xxxxxxff) or word size ('xxxxxx00)	#
# A0 = ADDR						#
# A1 = xxxxxxxx						#
# A2 = xxxxxxxx						#
# A3 = xxxxxxxx						#
# A4 = xxxxxxxx						#
# A5 = xxxxxxxx						#
# A6 = frame pointer					#
# A7 = stack pointer					#
#########################################################

	global		_isp_cas
_isp_cas:
	tst.b		%d6			# user or supervisor mode?
	bne.b		cas_super		# supervisor
cas_user:
	movq.l		&0x1,%d0		# load user data fc
	bra.b		cas_cont
cas_super:
	movq.l		&0x5,%d0		# load supervisor data fc

cas_cont:
	tst.b		%d7			# word or longword?
	bne.w		casl			# longword

####
casw:
	mov.l		%a0,%a1			# make copy for plpaw1
	mov.l		%a0,%a2			# make copy for plpaw2
	addq.l		&0x1,%a2		# plpaw2 points to end of word

	mov.l		%d2,%d3			# d3 = update[7:0]
	lsr.w		&0x8,%d2		# d2 = update[15:8]

# mask interrupt levels 0-6. save old mask value.
	mov.w		%sr,%d7			# save current SR
	ori.w		&0x0700,%sr		# inhibit interrupts

# load the SFC and DFC with the appropriate mode.
	movc		%sfc,%d6		# save old SFC/DFC
	movc		%d0,%sfc		# load new sfc
	movc		%d0,%dfc		# load new dfc

# pre-load the operand ATC. no page faults should occur here because
# _real_lock_page() should have taken care of this.
	plpaw		(%a1)			# load atc for ADDR
	plpaw		(%a2)			# load atc for ADDR+1

# push the operand lines from the cache if they exist.
	cpushl		%dc,(%a1)		# push dirty data
	cpushl		%dc,(%a2)		# push dirty data

# load the BUSCR values.
	mov.l		&0x80000000,%a1		# assert LOCK* buscr value
	mov.l		&0xa0000000,%a2		# assert LOCKE* buscr value
	mov.l		&0x00000000,%a3		# buscr unlock value

# pre-load the instruction cache for the following algorithm.
# this will minimize the number of cycles that LOCK* will be asserted.
	bra.b		CASW_ENTER		# start pre-loading icache

#
# D0 = dst operand <-
# D1 = update[15:8] operand
# D2 = update[7:0]  operand
# D3 = xxxxxxxx
# D4 = compare[15:0] operand
# D5 = xxxxxxxx
# D6 = old SFC/DFC
# D7 = old SR
# A0 = ADDR
# A1 = bus LOCK*  value
# A2 = bus LOCKE* value
# A3 = bus unlock value
# A4 = xxxxxxxx
# A5 = xxxxxxxx
#
	align		0x10
CASW_START:
	movc		%a1,%buscr		# assert LOCK*
	movs.w		(%a0),%d0		# fetch Dest[15:0]
	cmp.w	 	%d0,%d4			# Dest - Compare
	bne.b		CASW_NOUPDATE
	bra.b 		CASW_UPDATE
CASW_ENTER:
	bra.b		~+16

CASW_UPDATE:
	movs.b		%d2,(%a0)+		# Update[15:8] -> DEST
	movc		%a2,%buscr		# assert LOCKE*
	movs.b		%d3,(%a0)		# Update[7:0] -> DEST+0x1
	bra.b		CASW_UPDATE2
	bra.b		~+16

CASW_UPDATE2:
	movc		%a3,%buscr		# unlock the bus
	bra.b		casw_update_done
	nop
	nop
	nop
	nop
	bra.b		~+16

CASW_NOUPDATE:
	ror.l		&0x8,%d0		# get Dest[15:8]
	movs.b		%d0,(%a0)+		# Dest[15:8] -> DEST
	movc		%a2,%buscr		# assert LOCKE*
	rol.l		&0x8,%d0		# get Dest[7:0]
	bra.b 		CASW_NOUPDATE2
	bra.b		~+16

CASW_NOUPDATE2:
	movs.b		%d0,(%a0)		# Dest[7:0] -> DEST+0x1
	movc		%a3,%buscr		# unlock the bus
	bra.b		casw_noupdate_done
	nop
	nop
	bra.b		~+16

CASW_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	bra.b		CASW_START

#################################################################
# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	#
# CALLING _isp_cas_finish().					#
#								#
# D0 = destination[15:0] operand				#
# D1 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
# D2 = xxxxxxxx							#
# D3 = xxxxxxxx							#
# D4 = compare[15:0] operand					#
# D5 = xxxxxxxx							#
# D6 = xxxxxxxx							#
# D7 = xxxxxxxx							#
# A0 = xxxxxxxx							#
# A1 = xxxxxxxx							#
# A2 = xxxxxxxx							#
# A3 = xxxxxxxx							#
# A4 = xxxxxxxx							#
# A5 = xxxxxxxx							#
# A6 = frame pointer						#
# A7 = stack pointer						#
#################################################################

casw_noupdate_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupt mask level.
	mov.w		%d7,%sr			# restore old SR

	sf		%d1			# indicate no update was done
	bra.l		_isp_cas_finish

casw_update_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupt mask level.
	mov.w		%d7,%sr			# restore old SR

	st		%d1			# indicate update was done
	bra.l		_isp_cas_finish

################

# there are two possible mis-aligned cases for longword cas. they
# are separated because the final write which asserts LOCKE* must
# be an aligned write.
casl:
	mov.l		%a0,%a1			# make copy for plpaw1
	mov.l		%a0,%a2			# make copy for plpaw2
	addq.l		&0x3,%a2		# plpaw2 points to end of longword

	mov.l		%a0,%d1			# byte or word misaligned?
	btst		&0x0,%d1
	bne.w		casl2			# byte misaligned

	mov.l		%d2,%d3			# d3 = update[15:0]
	swap		%d2			# d2 = update[31:16]

# mask interrupts levels 0-6. save old mask value.
	mov.w		%sr,%d7			# save current SR
	ori.w		&0x0700,%sr		# inhibit interrupts

# load the SFC and DFC with the appropriate mode.
	movc		%sfc,%d6		# save old SFC/DFC
	movc		%d0,%sfc		# load new sfc
	movc		%d0,%dfc		# load new dfc

# pre-load the operand ATC. no page faults should occur here because
# _real_lock_page() should have taken care of this.
	plpaw		(%a1)			# load atc for ADDR
	plpaw		(%a2)			# load atc for ADDR+3

# push the operand lines from the cache if they exist.
	cpushl		%dc,(%a1)		# push dirty data
	cpushl		%dc,(%a2)		# push dirty data

# load the BUSCR values.
	mov.l		&0x80000000,%a1		# assert LOCK* buscr value
	mov.l		&0xa0000000,%a2		# assert LOCKE* buscr value
	mov.l		&0x00000000,%a3		# buscr unlock value

	bra.b		CASL_ENTER		# start pre-loading icache

#
# D0 = dst operand <-
# D1 = xxxxxxxx
# D2 = update[31:16] operand
# D3 = update[15:0]  operand
# D4 = compare[31:0] operand
# D5 = xxxxxxxx
# D6 = old SFC/DFC
# D7 = old SR
# A0 = ADDR
# A1 = bus LOCK*  value
# A2 = bus LOCKE* value
# A3 = bus unlock value
# A4 = xxxxxxxx
# A5 = xxxxxxxx
#
	align		0x10
CASL_START:
	movc		%a1,%buscr		# assert LOCK*
	movs.l		(%a0),%d0		# fetch Dest[31:0]
	cmp.l	 	%d0,%d4			# Dest - Compare
	bne.b		CASL_NOUPDATE
	bra.b 		CASL_UPDATE
CASL_ENTER:
	bra.b		~+16

CASL_UPDATE:
	movs.w		%d2,(%a0)+		# Update[31:16] -> DEST
	movc		%a2,%buscr		# assert LOCKE*
	movs.w		%d3,(%a0)		# Update[15:0] -> DEST+0x2
	bra.b		CASL_UPDATE2
	bra.b		~+16

CASL_UPDATE2:
	movc		%a3,%buscr		# unlock the bus
	bra.b		casl_update_done
	nop
	nop
	nop
	nop
	bra.b		~+16

CASL_NOUPDATE:
	swap		%d0			# get Dest[31:16]
	movs.w		%d0,(%a0)+		# Dest[31:16] -> DEST
	swap		%d0			# get Dest[15:0]
	movc		%a2,%buscr		# assert LOCKE*
	bra.b 		CASL_NOUPDATE2
	bra.b		~+16

CASL_NOUPDATE2:
	movs.w		%d0,(%a0)		# Dest[15:0] -> DEST+0x2
	movc		%a3,%buscr		# unlock the bus
	bra.b		casl_noupdate_done
	nop
	nop
	bra.b		~+16

CASL_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	bra.b		CASL_START

#################################################################
# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON	#
# CALLING _isp_cas_finish().					#
#								#
# D0 = destination[31:0] operand				#
# D1 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required	#
# D2 = xxxxxxxx							#
# D3 = xxxxxxxx							#
# D4 = compare[31:0] operand					#
# D5 = xxxxxxxx							#
# D6 = xxxxxxxx							#
# D7 = xxxxxxxx							#
# A0 = xxxxxxxx							#
# A1 = xxxxxxxx							#
# A2 = xxxxxxxx							#
# A3 = xxxxxxxx							#
# A4 = xxxxxxxx							#
# A5 = xxxxxxxx							#
# A6 = frame pointer						#
# A7 = stack pointer						#
#################################################################

casl_noupdate_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupt mask level.
	mov.w		%d7,%sr			# restore old SR

	sf		%d1			# indicate no update was done
	bra.l		_isp_cas_finish

casl_update_done:

# restore previous SFC/DFC value.
	movc		%d6,%sfc		# restore old SFC
	movc		%d6,%dfc		# restore old DFC

# restore previous interrupts mask level.
	mov.w		%d7,%sr			# restore old SR

	st		%d1			# indicate update was done
	bra.l		_isp_cas_finish

#######################################
casl2:
	mov.l		%d2,%d5			# d5 = Update[7:0]
	lsr.l		&0x8,%d2
	mov.l		%d2,%d3			# d3 = Update[23:8]
	swap		%d2			# d2 = Update[31:24]

# mask interrupts levels 0-6. save old mask value.
	mov.w		%sr,%d7			# save current SR
	ori.w		&0x0700,%sr		# inhibit interrupts

# load the SFC and DFC with the appropriate mode.
	movc		%sfc,%d6		# save old SFC/DFC
	movc		%d0,%sfc		# load new sfc
	movc		%d0,%dfc		# load new dfc

# pre-load the operand ATC. no page faults should occur here because
# _real_lock_page() should have taken care of this already.
	plpaw		(%a1)			# load atc for ADDR
	plpaw		(%a2)			# load atc for ADDR+3

# puch the operand lines from the cache if they exist.
	cpushl		%dc,(%a1)		# push dirty data
	cpushl		%dc,(%a2)		# push dirty data

# load the BUSCR values.
	mov.l		&0x80000000,%a1		# assert LOCK* buscr value
	mov.l		&0xa0000000,%a2		# assert LOCKE* buscr value
	mov.l		&0x00000000,%a3		# buscr unlock value

# pre-load the instruction cache for the following algorithm. 
# this will minimize the number of cycles that LOCK* will be asserted.
	bra.b		CASL2_ENTER		# start pre-loading icache

#
# D0 = dst operand <-
# D1 = xxxxxxxx
# D2 = update[31:24] operand
# D3 = update[23:8]  operand
# D4 = compare[31:0] operand
# D5 = update[7:0]  operand
# D6 = old SFC/DFC
# D7 = old SR
# A0 = ADDR
# A1 = bus LOCK*  value
# A2 = bus LOCKE* value
# A3 = bus unlock value
# A4 = xxxxxxxx
# A5 = xxxxxxxx
#
	align		0x10
CASL2_START:
	movc		%a1,%buscr		# assert LOCK*
	movs.l		(%a0),%d0		# fetch Dest[31:0]
	cmp.l	 	%d0,%d4			# Dest - Compare
	bne.b		CASL2_NOUPDATE
	bra.b 		CASL2_UPDATE
CASL2_ENTER:
	bra.b		~+16

CASL2_UPDATE:
	movs.b		%d2,(%a0)+		# Update[31:24] -> DEST
	movs.w		%d3,(%a0)+		# Update[23:8] -> DEST+0x1
	movc		%a2,%buscr		# assert LOCKE*
	bra.b		CASL2_UPDATE2
	bra.b		~+16

CASL2_UPDATE2:
	movs.b		%d5,(%a0)		# Update[7:0] -> DEST+0x3
	movc		%a3,%buscr		# unlock the bus
	bra.w		casl_update_done
	nop
	bra.b		~+16

CASL2_NOUPDATE:
	rol.l		&0x8,%d0		# get Dest[31:24]
	movs.b		%d0,(%a0)+		# Dest[31:24] -> DEST
	swap		%d0			# get Dest[23:8]
	movs.w		%d0,(%a0)+		# Dest[23:8] -> DEST+0x1
	bra.b 		CASL2_NOUPDATE2
	bra.b		~+16

CASL2_NOUPDATE2:
	rol.l		&0x8,%d0		# get Dest[7:0]
	movc		%a2,%buscr		# assert LOCKE*
	movs.b		%d0,(%a0)		# Dest[7:0] -> DEST+0x3
	bra.b 		CASL2_NOUPDATE3
	nop
	bra.b		~+16

CASL2_NOUPDATE3:
	movc		%a3,%buscr		# unlock the bus
	bra.w		casl_noupdate_done
	nop
	nop
	nop
	bra.b		~+16

CASL2_FILLER:
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	bra.b		CASL2_START

####
####
# end label used by _isp_cas_inrange()
	global		_CASHI
_CASHI: