path: root/sys/arch/mac68k/dev/grf_mv.c

/*	$OpenBSD: grf_mv.c,v 1.17 1999/04/24 06:39:40 downsj Exp $	*/
/*	$NetBSD: grf_mv.c,v 1.24 1997/05/03 02:29:54 briggs Exp $	*/

/*
 * Copyright (c) 1995 Allen Briggs.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Allen Briggs.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
/*
 * Device-specific routines for handling Nubus-based video cards.
 */

#include <sys/param.h>

#include <sys/device.h>
#include <sys/ioctl.h>
#include <sys/file.h>
#include <sys/malloc.h>
#include <sys/mman.h>
#include <sys/proc.h>
#include <sys/systm.h>

#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/grfioctl.h>
#include <machine/viareg.h>

#include "nubus.h"
#include "grfvar.h"

static void	load_image_data __P((caddr_t data, struct image_data *image));

static void	grfmv_intr_generic __P((void *vsc, int slot));
static void	grfmv_intr_radius __P((void *vsc, int slot));
static void	grfmv_intr_cti __P((void *vsc, int slot));
static void	grfmv_intr_cb264 __P((void *vsc, int slot));
static void	grfmv_intr_cb364 __P((void *vsc, int slot));

static int	grfmv_mode __P((struct grf_softc *gp, int cmd, void *arg));
static caddr_t	grfmv_phys __P((struct grf_softc *gp, vm_offset_t addr));
static int	grfmv_match __P((struct device *, void *, void *));
static void	grfmv_attach __P((struct device *, struct device *, void *));

struct cfdriver macvid_cd = {
	NULL, "macvid", DV_DULL
};

struct cfattach macvid_ca = {
	sizeof(struct grfbus_softc), grfmv_match, grfmv_attach
};

static void
load_image_data(data, image)
	caddr_t	data;
	struct	image_data *image;
{
	bcopy(data     , &image->size,       4);
	bcopy(data +  4, &image->offset,     4);
	bcopy(data +  8, &image->rowbytes,   2);
	bcopy(data + 10, &image->top,        2);
	bcopy(data + 12, &image->left,       2);
	bcopy(data + 14, &image->bottom,     2);
	bcopy(data + 16, &image->right,      2);
	bcopy(data + 18, &image->version,    2);
	bcopy(data + 20, &image->packType,   2);
	bcopy(data + 22, &image->packSize,   4);
	bcopy(data + 26, &image->hRes,       4);
	bcopy(data + 30, &image->vRes,       4);
	bcopy(data + 34, &image->pixelType,  2);
	bcopy(data + 36, &image->pixelSize,  2);
	bcopy(data + 38, &image->cmpCount,   2);
	bcopy(data + 40, &image->cmpSize,    2);
	bcopy(data + 42, &image->planeBytes, 4);
}

static int
grfmv_match(parent, vcf, aux)
	struct device *parent;
	void *vcf;
	void *aux;
{
	struct nubus_attach_args *na = (struct nubus_attach_args *)aux;

	if (na->category != NUBUS_CATEGORY_DISPLAY)
		return 0;

	if (na->type != NUBUS_TYPE_VIDEO)
		return 0;

	if (na->drsw != NUBUS_DRSW_APPLE)
		return 0;

	/*
	 * If we've gotten this far, then we're dealing with a real-live
	 * Apple QuickDraw-compatible display card resource.  Now, how to
	 * determine that this is an active resource???  Dunno.  But we'll
	 * proceed like it is.
	 */

	return 1;
}

static void
grfmv_attach(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	struct grfbus_softc *sc = (struct grfbus_softc *)self;
	struct nubus_attach_args *na = (struct nubus_attach_args *)aux;
	struct image_data image_store, image;
	struct grfmode *gm;
	char cardname[CARD_NAME_LEN];
	nubus_dirent dirent;
	nubus_dir dir, mode_dir;
	int mode;

	sc->card_id = na->drhw;

	bcopy(na->fmt, &sc->sc_slot, sizeof(nubus_slot));

	nubus_get_main_dir(&sc->sc_slot, &dir);

	if (nubus_find_rsrc(&sc->sc_slot, &dir, na->rsrcid, &dirent) <= 0)
		return;

	nubus_get_dir_from_rsrc(&sc->sc_slot, &dirent, &sc->board_dir);

	if (nubus_find_rsrc(&sc->sc_slot, &sc->board_dir,
	    NUBUS_RSRC_TYPE, &dirent) <= 0)
		if ((na->rsrcid != 128) ||
		    (nubus_find_rsrc(&sc->sc_slot, &dir, 129, &dirent) <= 0))
			return;

	mode = NUBUS_RSRC_FIRSTMODE;
	if (nubus_find_rsrc(&sc->sc_slot, &sc->board_dir, mode, &dirent) <= 0) {
		printf("\n%s: probe failed to get board rsrc.\n",
		    sc->sc_dev.dv_xname);
		return;
	}

	nubus_get_dir_from_rsrc(&sc->sc_slot, &dirent, &mode_dir);

	if (nubus_find_rsrc(&sc->sc_slot, &mode_dir, VID_PARAMS, &dirent)
	    <= 0) {
		printf("\n%s: probe failed to get mode dir.\n",
		    sc->sc_dev.dv_xname);
		return;
	}

	if (nubus_get_ind_data(&sc->sc_slot, &dirent, (caddr_t)&image_store,
				sizeof(struct image_data)) <= 0) {
		printf("\n%s: probe failed to get indirect mode data.\n",
		    sc->sc_dev.dv_xname);
		return;
	}

	/* Need to load display info (and driver?), etc... (?) */

	load_image_data((caddr_t)&image_store, &image);

	gm = &sc->curr_mode;
	gm->mode_id = mode;
	gm->fbbase = (caddr_t)(sc->sc_slot.virtual_base +
				m68k_trunc_page(image.offset));
	gm->fboff = image.offset & PGOFSET;
	gm->rowbytes = image.rowbytes;
	gm->width = image.right - image.left;
	gm->height = image.bottom - image.top;
	gm->fbsize = sc->curr_mode.height * sc->curr_mode.rowbytes;
	gm->hres = image.hRes;
	gm->vres = image.vRes;
	gm->ptype = image.pixelType;
	gm->psize = image.pixelSize;

	strncpy(cardname, nubus_get_card_name(&sc->sc_slot),
		CARD_NAME_LEN);
	cardname[CARD_NAME_LEN-1] = '\0';
	printf(": %s\n", cardname);

	if (sc->card_id == NUBUS_DRHW_TFB) {
		/*
		 * This is the Toby card, but apparently some manufacturers
		 * (like Cornerstone) didn't bother to get/use their own
		 * value here, even though the cards are different, so we
		 * so we try to differentiate here.
		 */
		if (strncmp(cardname, "Samsung 768", 11) == 0)
			sc->card_id = NUBUS_DRHW_SAM768;
		else if (strncmp(cardname, "Toby frame", 10) != 0)
			printf("%s: card masquaredes as Toby Framebuffer",
			    sc->sc_dev.dv_xname);
	}

	switch (sc->card_id) {
	case NUBUS_DRHW_M2HRVC:
	case NUBUS_DRHW_TFB:
		sc->cli_offset = 0xa0000;
		sc->cli_value = 0;
		add_nubus_intr(sc->sc_slot.slot, grfmv_intr_generic, sc);
		break;
	case NUBUS_DRHW_WVC:
		sc->cli_offset = 0xa00000;
		sc->cli_value = 0;
		add_nubus_intr(sc->sc_slot.slot, grfmv_intr_generic, sc);
		break;
	case NUBUS_DRHW_RPC8XJ:
		add_nubus_intr(sc->sc_slot.slot, grfmv_intr_radius, sc);
		break;
	case NUBUS_DRHW_FIILX:
	case NUBUS_DRHW_FIISXDSP:
		sc->cli_offset = 0xF05000;
		sc->cli_value = 0x80;
		add_nubus_intr(sc->sc_slot.slot, grfmv_intr_generic, sc);
		break;
	case NUBUS_DRHW_SAM768:
		add_nubus_intr(sc->sc_slot.slot, grfmv_intr_cti, sc);
		break;
	case NUBUS_DRHW_CB264:
		add_nubus_intr(sc->sc_slot.slot, grfmv_intr_cb264, sc);
		break;
	case NUBUS_DRHW_CB364:
		add_nubus_intr(sc->sc_slot.slot, grfmv_intr_cb364, sc);
		break;
	case NUBUS_DRHW_SE30:
		/* Do nothing--SE/30 interrupts are disabled */
		break;
	case NUBUS_DRHW_MICRON:
		/* What do we know about this one? */
	default:
		printf("%s: Unknown video card 0x%x--",
		    sc->sc_dev.dv_xname, sc->card_id);
		printf("Not installing interrupt routine.\n");
		break;
	}

	/* Perform common video attachment. */
	grf_establish(sc, &sc->sc_slot, grfmv_mode, grfmv_phys);
}

static int
grfmv_mode(gp, cmd, arg)
	struct grf_softc *gp;
	int cmd;
	void *arg;
{
	switch (cmd) {
	case GM_GRFON:
	case GM_GRFOFF:
		return 0;
	case GM_CURRMODE:
		break;
	case GM_NEWMODE:
		break;
	case GM_LISTMODES:
		break;
	}
	return EINVAL;
}

static caddr_t
grfmv_phys(gp, addr)
	struct grf_softc *gp;
	vm_offset_t addr;
{
	return (caddr_t)(NUBUS_SLOT2PA(gp->sc_slot->slot) +
				(addr - gp->sc_slot->virtual_base));
}

/* Interrupt handlers... */
/*
 * Generic routine to clear interrupts for cards where it simply takes
 * a CLR.B to clear the interrupt.  The offset of this byte varies between
 * cards.
 */
/*ARGSUSED*/
static void
grfmv_intr_generic(vsc, slot)
	void	*vsc;
	int	slot;
{
	struct grfbus_softc *sc;
	volatile char *slotbase;

	sc = (struct grfbus_softc *)vsc;
	slotbase = (volatile char *)sc->sc_slot.virtual_base;
	slotbase[sc->cli_offset] = sc->cli_value;
}

/*
 * Generic routine to clear interrupts for cards where it simply takes
 * a CLR.B to clear the interrupt.  The offset of this byte varies between
 * cards.
 */
/*ARGSUSED*/
static void
grfmv_intr_radius(vsc, slot)
	void	*vsc;
	int	slot;
{
	unsigned char	c;
	struct grfbus_softc *sc;
	volatile char *slotbase;

	sc = (struct grfbus_softc *)vsc;
	slotbase = (volatile char *)sc->sc_slot.virtual_base;

	/*
	 * The value 0x66 was the observed value on one	card.  It is read
	 * from the driver's information block, so this may not be sufficient.
	 * Then again, we're not setting up any other interrupts...
	 */
	c = 0x66;

	c |= 0x80;
	slotbase[0xD00403] = c;
	c &= 0x7F;
	slotbase[0xD00403] = c;
}

/*
 * Routine to clear interrupts on Samsung 768x1006 video controller.
 * This controller was manufactured by Cornerstone Technology, Inc.,
 * now known as Cornerstone Imaging.
 *
 * To clear this interrupt, we apparently have to set, then clear,
 * bit 2 at byte offset 0x80000 from the card's base.
 *	Information for this provided by Brad Salai <bsalai@servtech.com>
 */
/*ARGSUSED*/
static void
grfmv_intr_cti(vsc, slot)
	void	*vsc;
	int	slot;
{
	struct grfbus_softc *sc;
	volatile char *slotbase;

	sc = (struct grfbus_softc *)vsc;
	slotbase = ((volatile char *)sc->sc_slot.virtual_base) + 0x00080000;
	*slotbase = (*slotbase | 0x02);
	*slotbase = (*slotbase & 0xFD);
}

/*ARGSUSED*/
static void
grfmv_intr_cb264(vsc, slot)
	void	*vsc;
	int	slot;
{
	struct grfbus_softc *sc;
	volatile char *slotbase;

	sc = (struct grfbus_softc *)vsc;
	slotbase = (volatile char *)sc->sc_slot.virtual_base;
	asm volatile("	movl	%0,a0
			movl	a0@(0xff6028),d0
			andl	#0x2,d0
			beq	_mv_intr0
			movql	#0x3,d0
		_mv_intr0:
			movl	a0@(0xff600c),d1
			andl	#0x3,d1
			cmpl	d1,d0
			beq	_mv_intr_fin
			movl	d0,a0@(0xff600c)
			nop
			tstb	d0
			beq	_mv_intr1
			movl	#0x0002,a0@(0xff6040)
			movl	#0x0102,a0@(0xff6044)
			movl	#0x0105,a0@(0xff6048)
			movl	#0x000e,a0@(0xff604c)
			movl	#0x001c,a0@(0xff6050)
			movl	#0x00bc,a0@(0xff6054)
			movl	#0x00c3,a0@(0xff6058)
			movl	#0x0061,a0@(0xff605c)
			movl	#0x0012,a0@(0xff6060)
			bra	_mv_intr_fin
		_mv_intr1:
			movl	#0x0002,a0@(0xff6040)
			movl	#0x0209,a0@(0xff6044)
			movl	#0x020c,a0@(0xff6048)
			movl	#0x000f,a0@(0xff604c)
			movl	#0x0027,a0@(0xff6050)
			movl	#0x00c7,a0@(0xff6054)
			movl	#0x00d7,a0@(0xff6058)
			movl	#0x006b,a0@(0xff605c)
			movl	#0x0029,a0@(0xff6060)
		_mv_intr_fin:
			movl	#0x1,a0@(0xff6014)"
		: : "g" (slotbase) : "a0","d0","d1");
}

/*
 * Support for the Colorboard 364 might be more complex than it needs to
 * be.  If we can find more information about this card, this might be
 * significantly simplified.  Contributions welcome...  :-)
 */
/*ARGSUSED*/
static void
grfmv_intr_cb364(vsc, slot)
	void	*vsc;
	int	slot;
{
	struct grfbus_softc *sc;
	volatile char *slotbase;

	sc = (struct grfbus_softc *)vsc;
	slotbase = (volatile char *)sc->sc_slot.virtual_base;
	asm volatile("	movl	%0,a0
			movl	a0@(0xfe6028),d0
			andl	#0x2,d0
			beq	_cb364_intr4
			movql	#0x3,d0
			movl	a0@(0xfe6018),d1
			movl	#0x3,a0@(0xfe6018)
			movw	a0@(0xfe7010),d2
			movl	d1,a0@(0xfe6018)
			movl	a0@(0xfe6020),d1
			btst	#0x06,d2
			beq	_cb364_intr0
			btst	#0x00,d1
			beq	_cb364_intr5
			bsr	_cb364_intr1
			bra	_cb364_intr_out
		_cb364_intr0:
			btst	#0x00,d1
			bne	_cb364_intr5
			bsr	_cb364_intr1
			bra	_cb364_intr_out
		_cb364_intr1:
			movl	d0,a0@(0xfe600c)
			nop
			tstb	d0
			beq	_cb364_intr3
			movl	#0x0002,a0@(0xfe6040)
			movl	#0x0105,a0@(0xfe6048)
			movl	#0x000e,a0@(0xfe604c)
			movl	#0x00c3,a0@(0xfe6058)
			movl	#0x0061,a0@(0xfe605c)
			btst	#0x06,d2
			beq	_cb364_intr2
			movl	#0x001c,a0@(0xfe6050)
			movl	#0x00bc,a0@(0xfe6054)
			movl	#0x0012,a0@(0xfe6060)
			movl	#0x000e,a0@(0xfe6044)
			movl	#0x00c3,a0@(0xfe6064)
			movl	#0x0061,a0@(0xfe6020)
			rts
		_cb364_intr2:
			movl	#0x0016,a0@(0xfe6050)
			movl	#0x00b6,a0@(0xfe6054)
			movl	#0x0011,a0@(0xfe6060)
			movl	#0x0101,a0@(0xfe6044)
			movl	#0x00bf,a0@(0xfe6064)
			movl	#0x0001,a0@(0xfe6020)
			rts
		_cb364_intr3:
			movl	#0x0002,a0@(0xfe6040)
			movl	#0x0209,a0@(0xfe6044)
			movl	#0x020c,a0@(0xfe6048)
			movl	#0x000f,a0@(0xfe604c)
			movl	#0x0027,a0@(0xfe6050)
			movl	#0x00c7,a0@(0xfe6054)
			movl	#0x00d7,a0@(0xfe6058)
			movl	#0x006b,a0@(0xfe605c)
			movl	#0x0029,a0@(0xfe6060)
			oril	#0x0040,a0@(0xfe6064)
			movl	#0x0000,a0@(0xfe6020)
			rts
		_cb364_intr4:
			movq	#0x00,d0
		_cb364_intr5:
			movl	a0@(0xfe600c),d1
			andl	#0x3,d1
			cmpl	d1,d0
			beq	_cb364_intr_out
			bsr	_cb364_intr1
		_cb364_intr_out:
			movl	#0x1,a0@(0xfe6014)
		_cb364_intr_quit:
		" : : "g" (slotbase) : "a0","d0","d1","d2");
}