1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
|
/* $Id: if_iereg.h,v 1.2 1995/11/07 08:51:01 deraadt Exp $ */
/*
* if_sunie.h
*
* sun's ie interface
*/
/*
* programming notes:
*
* the ie chip operates in a 24 bit address space.
*
* most ie interfaces appear to be divided into two parts:
* - generic 586 stuff
* - board specific
*
* generic:
* the generic stuff of the ie chip is all done with data structures
* that live in the chip's memory address space. the chip expects
* its main data structure (the sys conf ptr -- SCP) to be at a fixed
* address in its 24 bit space: 0xfffff4
*
* the SCP points to another structure called the ISCP.
* the ISCP points to another structure called the SCB.
* the SCB has a status field, a linked list of "commands", and
* a linked list of "receive buffers". these are data structures that
* live in memory, not registers.
*
* board:
* to get the chip to do anything, you first put a command in the
* command data structure list. then you have to signal "attention"
* to the chip to get it to look at the command. how you
* signal attention depends on what board you have... on PC's
* there is an i/o port number to do this, on sun's there is a
* register bit you toggle.
*
* to get data from the chip you program it to interrupt...
*
*
* sun issues:
*
* there are 3 kinds of sun "ie" interfaces:
* 1 - a VME/multibus card
* 2 - an on-board interface (sun3's, sun-4/100's, and sun-4/200's)
* 3 - another VME board called the 3E
*
* the VME boards lives in vme16 space. only 16 and 8 bit accesses
* are allowed, so functions that copy data must be aware of this.
*
* the chip is an intel chip. this means that the byte order
* on all the "short"s in the chip's data structures is wrong.
* so, constants described in the intel docs are swapped for the sun.
* that means that any buffer pointers you give the chip must be
* swapped to intel format. yuck.
*
* VME/multibus interface:
* for the multibus interface the board ignores the top 4 bits
* of the chip address. the multibus interface seems to have its
* own MMU like page map (without protections or valid bits, etc).
* there are 256 pages of physical memory on the board (each page
* is 1024 bytes). there are 1024 slots in the page map. so,
* a 1024 byte page takes up 10 bits of address for the offset,
* and if there are 1024 slots in the page that is another 10 bits
* of the address. that makes a 20 bit address, and as stated
* earlier the board ignores the top 4 bits, so that accounts
* for all 24 bits of address.
*
* note that the last entry of the page map maps the top of the
* 24 bit address space and that the SCP is supposed to be at
* 0xfffff4 (taking into account allignment). so,
* for multibus, that entry in the page map has to be used for the SCP.
*
* the page map effects BOTH how the ie chip sees the
* memory, and how the host sees it.
*
* the page map is part of the "register" area of the board
*
* on-board interface:
*
* <fill in useful info later>
*
*
* VME3E interface:
*
* <fill in useful info later>
*
*/
/*
* PART 1: VME/multibus defs
*/
#define IEVME_PAGESIZE 1024 /* bytes */
#define IEVME_PAGSHIFT 10 /* bits */
#define IEVME_NPAGES 256 /* number of pages on chip */
#define IEVME_MAPSZ 1024 /* number of entries in the map */
/*
* PTE for the page map
*/
#define IEVME_SBORDR 0x8000 /* sun byte order */
#define IEVME_IBORDR 0x0000 /* intel byte ordr */
#define IEVME_P2MEM 0x2000 /* memory is on P2 */
#define IEVME_OBMEM 0x0000 /* memory is on board */
#define IEVME_PGMASK 0x0fff /* gives the physical page frame number */
struct ievme {
u_short pgmap[IEVME_MAPSZ];
u_short xxx[32]; /* prom */
u_short status; /* see below for bits */
u_short xxx2; /* filler */
u_short pectrl; /* parity control (see below) */
u_short peaddr; /* low 16 bits of address */
};
/*
* status bits
*/
#define IEVME_RESET 0x8000 /* reset board */
#define IEVME_ONAIR 0x4000 /* go out of loopback 'on-air' */
#define IEVME_ATTEN 0x2000 /* attention */
#define IEVME_IENAB 0x1000 /* interrupt enable */
#define IEVME_PEINT 0x0800 /* parity error interrupt enable */
#define IEVME_PERR 0x0200 /* parity error flag */
#define IEVME_INT 0x0100 /* interrupt flag */
#define IEVME_P2EN 0x0020 /* enable p2 bus */
#define IEVME_256K 0x0010 /* 256kb rams */
#define IEVME_HADDR 0x000f /* mask for bits 17-20 of address */
/*
* parity control
*/
#define IEVME_PARACK 0x0100 /* parity error ack */
#define IEVME_PARSRC 0x0080 /* parity error source */
#define IEVME_PAREND 0x0040 /* which end of the data got the error */
#define IEVME_PARADR 0x000f /* mask to get bits 17-20 of parity address */
/*
* PART 2: the on-board interface
*/
struct ieob {
u_char obctrl;
};
#define IEOB_NORSET 0x80 /* don't reset the board */
#define IEOB_ONAIR 0x40 /* put us on the air */
#define IEOB_ATTEN 0x20 /* attention! */
#define IEOB_IENAB 0x10 /* interrupt enable */
#define IEOB_XXXXX 0x08 /* free bit */
#define IEOB_XCVRL2 0x04 /* level 2 transceiver? */
#define IEOB_BUSERR 0x02 /* bus error */
#define IEOB_INT 0x01 /* interrupt */
#define IEOB_ADBASE 0xff000000 /* KVA base addr of 24 bit address space */
/*
* PART 3: the 3E board
*/
/*
* not supported (yet?)
*/
|
