1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
|
/* $OpenBSD: siopreg.h,v 1.2 1998/12/15 05:52:31 smurph Exp $ */
/*
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Van Jacobson of Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)siopreg.h 7.3 (Berkeley) 2/5/91
*/
/*
* NCR 53C710 SCSI interface hardware description.
*
* From the Mach scsi driver for the 53C700
*/
typedef struct {
/*00*/ volatile unsigned char siop_sien; /* rw: SCSI Interrupt Enable */
/*01*/ volatile unsigned char siop_sdid; /* rw: SCSI Destination ID */
/*02*/ volatile unsigned char siop_scntl1; /* rw: SCSI control reg 1 */
/*03*/ volatile unsigned char siop_scntl0; /* rw: SCSI control reg 0 */
/*04*/ volatile unsigned char siop_socl; /* rw: SCSI Output Control Latch */
/*05*/ volatile unsigned char siop_sodl; /* rw: SCSI Output Data Latch */
/*06*/ volatile unsigned char siop_sxfer; /* rw: SCSI Transfer reg */
/*07*/ volatile unsigned char siop_scid; /* rw: SCSI Chip ID reg */
/*08*/ volatile unsigned char siop_sbcl; /* ro: SCSI Bus Control Lines */
/*09*/ volatile unsigned char siop_sbdl; /* ro: SCSI Bus Data Lines */
/*0a*/ volatile unsigned char siop_sidl; /* ro: SCSI Input Data Latch */
/*0b*/ volatile unsigned char siop_sfbr; /* ro: SCSI First Byte Received */
/*0c*/ volatile unsigned char siop_sstat2; /* ro: SCSI status reg 2 */
/*0d*/ volatile unsigned char siop_sstat1; /* ro: SCSI status reg 1 */
/*0e*/ volatile unsigned char siop_sstat0; /* ro: SCSI status reg 0 */
/*0f*/ volatile unsigned char siop_dstat; /* ro: DMA status */
/*10*/ volatile unsigned long siop_dsa; /* rw: Data Structure Address */
/*14*/ volatile unsigned char siop_ctest3; /* ro: Chip test register 3 */
/*15*/ volatile unsigned char siop_ctest2; /* ro: Chip test register 2 */
/*16*/ volatile unsigned char siop_ctest1; /* ro: Chip test register 1 */
/*17*/ volatile unsigned char siop_ctest0; /* ro: Chip test register 0 */
/*18*/ volatile unsigned char siop_ctest7; /* rw: Chip test register 7 */
/*19*/ volatile unsigned char siop_ctest6; /* rw: Chip test register 6 */
/*1a*/ volatile unsigned char siop_ctest5; /* rw: Chip test register 5 */
/*1b*/ volatile unsigned char siop_ctest4; /* rw: Chip test register 4 */
/*1c*/ volatile unsigned long siop_temp; /* rw: Temporary Stack reg */
/*20*/ volatile unsigned char siop_lcrc; /* rw: LCRC value */
/*21*/ volatile unsigned char siop_ctest8; /* rw: Chip test register 8 */
/*22*/ volatile unsigned char siop_istat; /* rw: Interrupt Status reg */
/*23*/ volatile unsigned char siop_dfifo; /* rw: DMA FIFO */
/*24*/ volatile unsigned char siop_dcmd; /* rw: DMA Command Register */
/*25*/ volatile unsigned char siop_dbc2; /* rw: DMA Byte Counter reg */
/*26*/ volatile unsigned char siop_dbc1;
/*27*/ volatile unsigned char siop_dbc0;
/*28*/ volatile unsigned long siop_dnad; /* rw: DMA Next Address */
/*2c*/ volatile unsigned long siop_dsp; /* rw: DMA SCRIPTS Pointer reg */
/*30*/ volatile unsigned long siop_dsps; /* rw: DMA SCRIPTS Pointer Save reg */
/*34*/ volatile unsigned long siop_scratch; /* rw: Scratch Register */
/*38*/ volatile unsigned char siop_dcntl; /* rw: DMA Control reg */
/*39*/ volatile unsigned char siop_dwt; /* rw: DMA Watchdog Timer */
/*3a*/ volatile unsigned char siop_dien; /* rw: DMA Interrupt Enable */
/*3b*/ volatile unsigned char siop_dmode; /* rw: DMA Mode reg */
/*3c*/ volatile unsigned long siop_adder;
} siop_regmap_t;
typedef volatile siop_regmap_t *siop_regmap_p;
/*
* Register defines
*/
/* Scsi control register 0 (scntl0) */
#define SIOP_SCNTL0_ARB 0xc0 /* Arbitration mode */
# define SIOP_ARB_SIMPLE 0x00
# define SIOP_ARB_FULL 0xc0
#define SIOP_SCNTL0_START 0x20 /* Start Sequence */
#define SIOP_SCNTL0_WATN 0x10 /* (Select) With ATN */
#define SIOP_SCNTL0_EPC 0x08 /* Enable Parity Checking */
#define SIOP_SCNTL0_EPG 0x04 /* Enable Parity Generation */
#define SIOP_SCNTL0_AAP 0x02 /* Assert ATN on Parity Error */
#define SIOP_SCNTL0_TRG 0x01 /* Target Mode */
/* Scsi control register 1 (scntl1) */
#define SIOP_SCNTL1_EXC 0x80 /* Extra Clock Cycle of data setup */
#define SIOP_SCNTL1_ADB 0x40 /* Assert Data Bus */
#define SIOP_SCNTL1_ESR 0x20 /* Enable Selection/Reselection */
#define SIOP_SCNTL1_CON 0x10 /* Connected */
#define SIOP_SCNTL1_RST 0x08 /* Assert RST */
#define SIOP_SCNTL1_AESP 0x04 /* Assert even SCSI parity */
#define SIOP_SCNTL1_RES0 0x02 /* Reserved */
#define SIOP_SCNTL1_RES1 0x01 /* Reserved */
/* Scsi interrupt enable register (sien) */
#define SIOP_SIEN_M_A 0x80 /* Phase Mismatch or ATN active */
#define SIOP_SIEN_FCMP 0x40 /* Function Complete */
#define SIOP_SIEN_STO 0x20 /* (Re)Selection timeout */
#define SIOP_SIEN_SEL 0x10 /* (Re)Selected */
#define SIOP_SIEN_SGE 0x08 /* SCSI Gross Error */
#define SIOP_SIEN_UDC 0x04 /* Unexpected Disconnect */
#define SIOP_SIEN_RST 0x02 /* RST asserted */
#define SIOP_SIEN_PAR 0x01 /* Parity Error */
/* Scsi chip ID (scid) */
#define SIOP_SCID_VALUE(i) (1<<i)
/* Scsi transfer register (sxfer) */
#define SIOP_SXFER_DHP 0x80 /* Disable Halt on Parity error/ ATN asserted */
#define SIOP_SXFER_TP 0x70 /* Synch Transfer Period */
/* see specs for formulas:
Period = TCP * (4 + XFERP )
TCP = 1 + CLK + 1..2;
*/
#define SIOP_SXFER_MO 0x0f /* Synch Max Offset */
# define SIOP_MAX_OFFSET 8
/* Scsi output data latch register (sodl) */
/* Scsi output control latch register (socl) */
#define SIOP_REQ 0x80 /* SCSI signal <x> asserted */
#define SIOP_ACK 0x40
#define SIOP_BSY 0x20
#define SIOP_SEL 0x10
#define SIOP_ATN 0x08
#define SIOP_MSG 0x04
#define SIOP_CD 0x02
#define SIOP_IO 0x01
#define SIOP_PHASE(socl) SCSI_PHASE(socl)
/* Scsi first byte received register (sfbr) */
/* Scsi input data latch register (sidl) */
/* Scsi bus data lines register (sbdl) */
/* Scsi bus control lines register (sbcl). Same as socl */
/* DMA status register (dstat) */
#define SIOP_DSTAT_DFE 0x80 /* DMA FIFO empty */
#define SIOP_DSTAT_RES 0x40
#define SIOP_DSTAT_BF 0x20 /* Bus fault */
#define SIOP_DSTAT_ABRT 0x10 /* Aborted */
#define SIOP_DSTAT_SSI 0x08 /* SCRIPT Single Step */
#define SIOP_DSTAT_SIR 0x04 /* SCRIPT Interrupt Instruction */
#define SIOP_DSTAT_WTD 0x02 /* Watchdog Timeout Detected */
#define SIOP_DSTAT_IID 0x01 /* Invalid Instruction Detected */
/* Scsi status register 0 (sstat0) */
#define SIOP_SSTAT0_M_A 0x80 /* Phase Mismatch or ATN active */
#define SIOP_SSTAT0_FCMP 0x40 /* Function Complete */
#define SIOP_SSTAT0_STO 0x20 /* (Re)Selection timeout */
#define SIOP_SSTAT0_SEL 0x10 /* (Re)Selected */
#define SIOP_SSTAT0_SGE 0x08 /* SCSI Gross Error */
#define SIOP_SSTAT0_UDC 0x04 /* Unexpected Disconnect */
#define SIOP_SSTAT0_RST 0x02 /* RST asserted */
#define SIOP_SSTAT0_PAR 0x01 /* Parity Error */
/* Scsi status register 1 (sstat1) */
#define SIOP_SSTAT1_ILF 0x80 /* Input latch (sidl) full */
#define SIOP_SSTAT1_ORF 0x40 /* output reg (sodr) full */
#define SIOP_SSTAT1_OLF 0x20 /* output latch (sodl) full */
#define SIOP_SSTAT1_AIP 0x10 /* Arbitration in progress */
#define SIOP_SSTAT1_LOA 0x08 /* Lost arbitration */
#define SIOP_SSTAT1_WOA 0x04 /* Won arbitration */
#define SIOP_SSTAT1_RST 0x02 /* SCSI RST current value */
#define SIOP_SSTAT1_SDP 0x01 /* SCSI SDP current value */
/* Scsi status register 2 (sstat2) */
#define SIOP_SSTAT2_FF 0xf0 /* SCSI FIFO flags (bytecount) */
# define SIOP_SCSI_FIFO_DEEP 8
#define SIOP_SSTAT2_SDP 0x08 /* Latched (on REQ) SCSI SDP */
#define SIOP_SSTAT2_MSG 0x04 /* Latched SCSI phase */
#define SIOP_SSTAT2_CD 0x02
#define SIOP_SSTAT2_IO 0x01
/* Chip test register 0 (ctest0) */
#define SIOP_CTEST0_RES0 0x80
#define SIOP_CTEST0_BTD 0x40 /* Byte-to-byte Timer Disable */
#define SIOP_CTEST0_GRP 0x20 /* Generate Receive Parity for Passthrough */
#define SIOP_CTEST0_EAN 0x10 /* Enable Active Negation */
#define SIOP_CTEST0_HSC 0x08 /* Halt SCSI clock */
#define SIOP_CTEST0_ERF 0x04 /* Extend REQ/ACK Filtering */
#define SIOP_CTEST0_RES1 0x02
#define SIOP_CTEST0_DDIR 0x01 /* Xfer direction (1-> from SCSI bus) */
/* Chip test register 1 (ctest1) */
#define SIOP_CTEST1_FMT 0xf0 /* Byte empty in DMA FIFO bottom (high->byte3) */
#define SIOP_CTEST1_FFL 0x0f /* Byte full in DMA FIFO top, same */
/* Chip test register 2 (ctest2) */
#define SIOP_CTEST2_RES 0x80
#define SIOP_CTEST2_SIGP 0x40 /* Signal process */
#define SIOP_CTEST2_SOFF 0x20 /* Synch Offset compare (1-> zero Init, max Tgt */
#define SIOP_CTEST2_SFP 0x10 /* SCSI FIFO Parity */
#define SIOP_CTEST2_DFP 0x08 /* DMA FIFO Parity */
#define SIOP_CTEST2_TEOP 0x04 /* True EOP (a-la 5380) */
#define SIOP_CTEST2_DREQ 0x02 /* DREQ status */
#define SIOP_CTEST2_DACK 0x01 /* DACK status */
/* Chip test register 3 (ctest3) read-only, top of SCSI FIFO */
/* Chip test register 4 (ctest4) */
#define SIOP_CTEST4_MUX 0x80 /* Host bus multiplex mode */
#define SIOP_CTEST4_ZMOD 0x40 /* High-impedance outputs */
#define SIOP_CTEST4_SZM 0x20 /* ditto, SCSI "outputs" */
#define SIOP_CTEST4_SLBE 0x10 /* SCSI loobpack enable */
#define SIOP_CTEST4_SFWR 0x08 /* SCSI FIFO write enable (from sodl) */
#define SIOP_CTEST4_FBL 0x07 /* DMA FIFO Byte Lane select (from ctest6)
4->0, .. 7->3 */
/* Chip test register 5 (ctest5) */
#define SIOP_CTEST5_ADCK 0x80 /* Clock Address Incrementor */
#define SIOP_CTEST5_BBCK 0x40 /* Clock Byte counter */
#define SIOP_CTEST5_ROFF 0x20 /* Reset SCSI offset */
#define SIOP_CTEST5_MASR 0x10 /* Master set/reset pulses (of bits 3-0) */
#define SIOP_CTEST5_DDIR 0x08 /* (re)set internal DMA direction */
#define SIOP_CTEST5_EOP 0x04 /* (re)set internal EOP */
#define SIOP_CTEST5_DREQ 0x02 /* (re)set internal REQ */
#define SIOP_CTEST5_DACK 0x01 /* (re)set internal ACK */
/* Chip test register 6 (ctest6) DMA FIFO access */
/* Chip test register 7 (ctest7) */
#define SIOP_CTEST7_CDIS 0x80 /* Cache burst disable */
#define SIOP_CTEST7_SC1 0x40 /* Snoop control 1 */
#define SIOP_CTEST7_SC0 0x20 /* Snoop contorl 0 */
#define SIOP_CTEST7_INHIBIT (0 << 5)
#define SIOP_CTEST7_SNOOP (1 << 5)
#define SIOP_CTEST7_INVAL (2 << 5)
#define SIOP_CTEST7_RESV (3 << 5)
#define SIOP_CTEST7_STD 0x10 /* Selection timeout disable */
#define SIOP_CTEST7_DFP 0x08 /* DMA FIFO parity bit */
#define SIOP_CTEST7_EVP 0x04 /* Even parity (to host bus) */
#define SIOP_CTEST7_TT1 0x02 /* Transfer type bit */
#define SIOP_CTEST7_DIFF 0x01 /* Differential mode */
/* DMA FIFO register (dfifo) */
#define SIOP_DFIFO_RES 0x80
#define SIOP_DFIFO_BO 0x7f /* FIFO byte offset counter */
/* Interrupt status register (istat) */
#define SIOP_ISTAT_ABRT 0x80 /* Abort operation */
#define SIOP_ISTAT_RST 0x40 /* Software reset */
#define SIOP_ISTAT_SIGP 0x20 /* Signal process */
#define SIOP_ISTAT_RES 0x10
#define SIOP_ISTAT_CON 0x08 /* Connected */
#define SIOP_ISTAT_RES1 0x04
#define SIOP_ISTAT_SIP 0x02 /* SCSI Interrupt pending */
#define SIOP_ISTAT_DIP 0x01 /* DMA Interrupt pending */
/* Chip test register 8 (ctest8)
#define SIOP_CTEST8_V 0xf0 /* Chip revision level */
#define SIOP_CTEST8_FLF 0x08 /* Flush DMA FIFO */
#define SIOP_CTEST8_CLF 0x04 /* Clear DMA and SCSI FIFOs */
#define SIOP_CTEST8_FM 0x02 /* Fetch pin mode */
#define SIOP_CTEST8_SM 0x01 /* Snoop pins mode */
/* DMA Mode register (dmode) */
#define SIOP_DMODE_BL_MASK 0xc0 /* 0->1 1->2 2->4 3->8 */
#define SIOP_DMODE_FC 0x30 /* Function code */
#define SIOP_DMODE_PD 0x08 /* Program/data */
#define SIOP_DMODE_FAM 0x04 /* Fixed address mode */
#define SIOP_DMODE_U0 0x02 /* User programmable transfer type */
#define SIOP_DMODE_MAN 0x01 /* Manual start mode */
/* DMA interrupt enable register (dien) */
#define SIOP_DIEN_RES 0xc0
#define SIOP_DIEN_BF 0x20 /* On Bus Fault */
#define SIOP_DIEN_ABRT 0x10 /* On Abort */
#define SIOP_DIEN_SSI 0x08 /* On SCRIPTS sstep */
#define SIOP_DIEN_SIR 0x04 /* On SCRIPTS intr instruction */
#define SIOP_DIEN_WTD 0x02 /* On watchdog timeout */
#define SIOP_DIEN_IID 0x01 /* On illegal instruction detected */
/* DMA control register (dcntl) */
#define SIOP_DCNTL_CF_MASK 0xc0 /* Clock frequency dividers:
0 --> 37.51..50.00 Mhz, div=2
1 --> 25.01..37.50 Mhz, div=1.5
2 --> 16.67..25.00 Mhz, div=1
3 --> 50.01..66.67 Mhz, div=3
*/
#define SIOP_DCNTL_EA 0x20 /* Enable ack */
#define SIOP_DCNTL_SSM 0x10 /* Single step mode */
#define SIOP_DCNTL_LLM 0x08 /* Enable SCSI Low-level mode */
#define SIOP_DCNTL_STD 0x04 /* Start DMA operation */
#define SIOP_DCNTL_FA 0x02 /* Fast arbitration */
#define SIOP_DCNTL_COM 0x01 /* 53C700 compatibility */
|
