summaryrefslogtreecommitdiff
path: root/sys/arch/sparc/conf/FLOPPY
blob: b01803a08e6f29ef6d6e5206ff4b233d6d7e2dbc (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
# 	$OpenBSD: FLOPPY,v 1.13 1997/04/29 05:15:59 deraadt Exp $
# 	$NetBSD: GENERIC,v 1.28.2.1 1996/07/02 23:55:22 jtc Exp $

# Machine architecture; required by config(8)
machine		sparc

#option		INSECURE	# default to secure

option		TIMEZONE=0	# time zone to adjust RTC time by
option		DST=0		# daylight savings time used by RTC

option		SWAPPAGER	# paging; REQUIRED
option		DEVPAGER	# mmap() of devices

#option		DDB		# in-kernel debugger
#makeoption	DEBUG="-g"	# compile full symbol table
#option		DIAGNOSTIC	# internal consistency checks
#option		KTRACE		# system call tracing, a la ktrace(1)

#option		SYSVMSG		# System V-like message queues
#option		SYSVSEM		# System V-like semaphores
#option		SYSVSHM		# System V-like memory sharing
#option		SHMMAXPGS=1024	# 1024 pages is the default

option		COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
option		COMPAT_09	# NetBSD 0.9,
option		COMPAT_10	# NetBSD 1.0,
option		COMPAT_11	# NetBSD 1.1,
option		COMPAT_43	# and 4.3BSD
#option		TCP_COMPAT_42	# TCP bug compatibility with 4.2BSD

option		LKM		# loadable kernel modules

option		FFS		# UFS
#option		QUOTA		# UFS quotas
option		MFS		# memory file system


option		NFSCLIENT	# Network File System client
#option		NFSSERVER	# Network File System server

option		CD9660		# ISO 9660 + Rock Ridge file system
option		MSDOSFS		# MS-DOS file system
option		FDESC		# /dev/fd
option		FIFO		# FIFOs; RECOMMENDED
option		KERNFS		# /kern
#option		NULLFS		# loopback file system
#option		PORTAL		# create sockets with open(2)
option		PROCFS		# /proc
#option		UMAPFS		# NULLFS + uid and gid remapping
#option		UNION		# union file system

#option		GATEWAY		# packet forwarding
option		INET		# IP + ICMP + TCP + UDP
#option		NS		# XNS
#option		NSIP		# XNS tunneling over IP
#option		IPX		# IPX+SPX
#option		IPXIP		# IPX tunneling over IP
#option		ISO,TPIP	# OSI
#option		EON		# OSI tunneling over IP
#option		CCITT,LLC,HDLC	# X.25
#option		IPFILTER	# IP packet filter for security

pseudo-device	loop	1	# network loopback
#pseudo-device	bpfilter 8	# packet filter
#pseudo-device	sl	2	# CSLIP
#pseudo-device	ppp	2	# PPP
#pseudo-device	tun	2	# network tunneling over tty

pseudo-device	pty	64	# pseudo-terminals
#pseudo-device	tb	1	# tablet line discipline
pseudo-device	vnd	4	# paging to files
pseudo-device	ccd	4	# concatenated disk devices

option		BOOT_CONFIG	# add support for boot -c

# Options for variants of the Sun SPARC architecure.
# At least one is required.
#option		SUN4		# sun4/100, sun4/200, sun4/300
option		SUN4C		# sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc.
option		SUN4M		# sun4m - SS10, SS20, Classic, etc.

#option		MMU_3L		# 3-level MMU on sun4/400

#option		KGDB		# support for kernel gdb
#option		KGDBDEV=0xc01	# kgdb device number (dev_t)
#option		KGDBRATE=38400	# baud rate

# Options for SPARCstation hardware
option		RASTERCONSOLE	# fast rasterop console

# Generic swap; second partition of root disk or network.
config		bsd	swap generic

# Main bus and CPU .. all systems.
mainbus0 at root
cpu0	at mainbus0

# Bus types found on SPARC systems.
sbus0	at mainbus0				# sun4c
obio0	at mainbus0				# sun4 and sun4m
#vmes0	at mainbus0				# sun4
#vmel0	at mainbus0				# sun4
iommu0	at mainbus0				# sun4m
sbus0	at iommu0				# sun4m

#audio0	at mainbus0				# sun4c
#audio0	at obio0				# sun4m

auxreg0	at mainbus0				# sun4c
auxreg0	at obio0				# sun4m

# Power status and control register found on Sun4m systems
#power0	at obio0

# Mostek clock found on 4/300, sun4c, and sun4m systems.
# The Mostek clock NVRAM is the "eeprom" on sun4/300 systems.
clock0	at mainbus0				# sun4c
clock0	at obio0				# sun4m
#clock0	at obio0 addr 0xf2000000		# sun4/300

# Intersil clock found on 4/100 and 4/200 systems.
#oclock0 at obio0 addr 0xf3000000		# sun4/200
#oclock0 at obio0 addr 0x03000000		# sun4/100

# Memory error registers.
memreg0	at mainbus0				# sun4c
memreg0	at obio0				# sun4m
#memreg0	at obio0 addr 0xf4000000		# sun4/200 and sun4/300
#memreg0	at obio0 addr 0x04000000		# sun4/100

# Timer chip found on 4/300, sun4c, and sun4m systems.
timer0	at mainbus0				# sun4c
timer0	at obio0				# sun4m
#timer0	at obio0 addr 0xef000000		# sun4/300

# EEPROM found on 4/100 and 4/200 systems.  Note that the 4/300
# doesn't use this driver; the `EEPROM' is in the NVRAM on the
# Mostek clock chip on 4/300 systems.
#eeprom0	at obio0 addr 0xf2000000		# sun4/200
#eeprom0	at obio0 addr 0x02000000		# sun4/100

# Zilog 8530 serial chips.  Each has two-channels.
# zs0 is ttya and ttyb.  zs1 is the keyboard and mouse.
zs0	at mainbus0					# sun4c
zs0	at obio0					# sun4m
#zs0	at obio0 addr 0xf1000000 level 12 flags 0x103	# sun4/200 and sun4/300
#zs0	at obio0 addr 0x01000000 level 12 flags 0x103	# sun4/100
zs1	at mainbus0					# sun4c
zs1	at obio0					# sun4m
#zs1	at obio0 addr 0xf0000000 level 12 flags 0x103	# sun4/200 and sun4/300
#zs1	at obio0 addr 0x00000000 level 12 flags 0x103	# sun4/100
#zs2	at obio0 addr 0xe0000000 level 12 flags 0x103	# sun4/300

#
# Note the flags on the esp entries below, that work around
# deficiencies in the current driver:
#	bits 0-7:  disable disconnect/reselect for the corresponding target
#	bits 8-15: disable synch negotiation for target [bit-8]
#	Note: targets 4-7 have disconnect/reselect enabled on the premise
#	      that tape devices normally have one of these targets. Tape
#	      devices should be allowed to disconnect for the SCSI bus
#	      to operate acceptably.
#

# sun4/300 SCSI - an NCR53c94 or equivalent behind
# an LSI Logic DMA controller
#dma0	at obio0 addr 0xfa001000 level 4		# sun4/300
esp0	at obio0 addr 0xfa000000 level 4 flags 0xff0f	#

# sun4c or sun4m SCSI - an NCR53c94 or equivalent behind
# specialized DMA glue
dma0	at sbus0 slot ? offset ?			# on-board SCSI
esp0	at sbus0 slot ? offset ? flags 0xff0f		# sun4c
esp0	at dma0 flags 0xff0f				# sun4m

# FSBE/S SCSI - an NCR53c94 or equivalent behind
dma*	at sbus? slot ? offset ?			# SBus SCSI
esp*	at sbus? slot ? offset ? flags 0xff0f		# two flavours
esp*	at dma? flags 0xff0f				# depending on model

# sun4m Ethernet - an AMD 7990 LANCE behind
# specialized DMA glue
ledma0	at sbus0 slot ? offset ?			# sun4m on-board
le0	at ledma0					#

# Additional SBus LANCE devices - glued on by lebuffer (not yet implemented)
#lebuffer*	at sbus0 slot ? offset ?		# sun4m SBus
#le*	at lebuffer?					#

# sun4/300 and sun4c Ethernet - an AMD 7990 LANCE
le0	at sbus0 slot ? offset ?			# sun4c on-board
le*	at sbus? slot ? offset ?

#le0	at obio0 addr 0xf9000000 level 6		# sun4/300

# sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board
# or on a Multibus/VME card.
#ie0	at obio0 addr 0xf6000000 level 6		# sun4/200 on-board
#ie0	at obio0 addr 0x06000000 level 6		# sun4/100 on-board

#ie1	at vmes0 addr 0xffe88000 level 5 vect 0x75
#ie2	at vmes0 addr 0xff31ff02 level 5 vect 0x76
#ie3	at vmes0 addr 0xff35ff02 level 5 vect 0x77
#ie4	at vmes0 addr 0xff2dff02 level 5 vect 0x7c

# Xylogics 753 or 7053 VME SMD disk controllers and disks, found
# on sun4 systems.
#xdc0	at vmel0 addr 0xffffee80 level 3 vect 0x44
#xdc1	at vmel0 addr 0xffffee90 level 3 vect 0x45
#xdc2	at vmel0 addr 0xffffeea0 level 3 vect 0x46
#xdc3	at vmel0 addr 0xffffeeb0 level 3 vect 0x47
#xd*	at xdc? drive ?

# Xylogics 451 or 451 VME SMD disk controllers and disks, found
# on sun4 systems.
#xyc0	at vmes0 addr 0xffffee40 level 3 vect 0x48
#xyc1	at vmes0 addr 0xffffee48 level 3 vect 0x49
#xy*	at xyc? drive ?

# NCR5380-based "Sun SCSI 3" VME SCSI controller.
# This driver has several flags which may be enabled by OR'ing
# the values and using the "flags" directive.
# Valid flags are:
#
#	0x01		Use DMA (may be polled)
#	0x02		Use DMA completion interrupts
#	0x04		Allow disconnect/reselect
#
# E.g. the following would enable DMA, interrupts, and reselect:
# si0	at vmes0 addr 0xff200000 level 3 vect 0x40 flags 0x07
#
# By default, DMA is enabled in the driver.
#si0	at vmes0 addr 0xff200000 level 3 vect 0x40

# NCR5380-based "SCSI Weird" on-board SCSI interface found
# on sun4/100 systems.  The flags are the same as the "si"
# controller.  Note, while DMA is enabled by default, only
# polled DMA works at this time, and reselects do not work
# on this particular controller.
#sw0	at obio0 addr 0x0a000000 level 3

# Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m
# systems.  If your sun4 system has a cgfour installed in the P4 slot,
# the P4 entries for "bwtwo" will attach to the overlay plane of the
# "cgfour".
bwtwo0	at sbus0 slot ? offset ?		# sun4c on-board
bwtwo*	at sbus? slot ? offset ?		# sun4c and sun4m
#bwtwo0	at obio0 addr 0xfd000000 level 4	# sun4/200
#bwtwo0	at obio0 addr 0xfb300000 level 4	# sun4/300 in P4 slot
#bwtwo0	at obio0 addr 0x0b300000 level 4	# sun4/100 in P4 slot

# Sun "cgtwo" VME color framebuffer
#cgtwo0	at vmes0 addr 0xff400000 level 4 vect 0xa8

# Sun "cgthree" Sbus color framebuffer
cgthree0 at sbus? slot ? offset ?
cgthree* at sbus? slot ? offset ?
#cgthree0 at obio? slot ? offset ?		# sun4m
#cgthree* at obio? slot ? offset ?		# sun4m

# Sun "cgfour" color framebuffer with overlay plane.  See above comment
# regarding overlay plane.
#cgfour0	at obio0 addr 0xfb300000 level 4	# sun4/300 P4
#cgfour0	at obio0 addr 0x0b300000 level 4	# sun4/100 P4

# Sun "cgsix" accelerated color framebuffer.
cgsix0	at sbus? slot ? offset ?
cgsix*	at sbus? slot ? offset ?
#cgsix0	at obio0 addr 0xfb000000 level 4	# sun4/300 P4
#cgsix0	at obio0 addr 0x0b000000 level 4	# sun4/100 P4

# Sun "cgeight" 24-bit framebuffer
#cgeight0 at obio0 addr 0xfb300000 level 4	# sun4/300 P4
#cgeight0 at obio0 addr 0x0b300000 level 4	# sun4/100 P4

# SCSI bus layer.  SCSI devices attach to the SCSI bus, which attaches
# to the underlying hardware controller.
scsibus* at esp?
#scsibus* at si?
#scsibus* at sw?

# These entries find devices on all SCSI busses and assign
# unit numers dynamically.
sd*	at scsibus? target ? lun ?		# SCSI disks
st*	at scsibus? target ? lun ?		# SCSI tapes
cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
#ch*	at scsibus? target ? lun ?		# SCSI changer devices

# Floppy controller and drive found on SPARCstations.
fdc0	at mainbus0				# sun4c controller
fdc0	at obio0				# sun4m controller
fd*	at fdc0					# the drive itself

pseudo-device	kbd		# Sun keyboard
#pseudo-device	strip	1	# radio clock

options		OLD_PIPE		# XXX nbpg botch