summaryrefslogtreecommitdiff
path: root/sys/arch/sparc/dev/dma.c
blob: 4c961cac6903380ac5af681adf5021dede2fc2fa (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
/*	$NetBSD: dma.c,v 1.28.2.2 1996/07/02 23:46:29 jtc Exp $ */

/*
 * Copyright (c) 1994 Paul Kranenburg.  All rights reserved.
 * Copyright (c) 1994 Peter Galbavy.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Peter Galbavy.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>

#include <sparc/autoconf.h>
#include <sparc/cpu.h>

#include <scsi/scsi_all.h>
#include <scsi/scsiconf.h>

#include <sparc/dev/sbusvar.h>
#include <sparc/dev/dmareg.h>
#include <sparc/dev/dmavar.h>
#include <sparc/dev/espreg.h>
#include <sparc/dev/espvar.h>

int dmaprint		__P((void *, const char *));
void dmaattach		__P((struct device *, struct device *, void *));
int dmamatch		__P((struct device *, void *, void *));
void dma_reset		__P((struct dma_softc *));
void dma_enintr		__P((struct dma_softc *));
int dma_isintr		__P((struct dma_softc *));
int espdmaintr		__P((struct dma_softc *));
int ledmaintr		__P((struct dma_softc *));
int dma_setup		__P((struct dma_softc *, caddr_t *, size_t *,
			     int, size_t *));
void dma_go		__P((struct dma_softc *));

struct cfattach dma_ca = {
	sizeof(struct dma_softc), dmamatch, dmaattach
};

struct cfdriver dma_cd = {
	NULL, "dma", DV_DULL
};

struct cfattach ledma_ca = {
	sizeof(struct dma_softc), matchbyname, dmaattach
};

struct cfdriver ledma_cd = {
	NULL, "ledma", DV_DULL
};

int
dmaprint(aux, name)
	void *aux;
	const char *name;
{
	register struct confargs *ca = aux;

	if (name)
		printf("[%s at %s]", ca->ca_ra.ra_name, name);
	printf(" slot 0x%x offset 0x%x", ca->ca_slot, ca->ca_offset);
	return (UNCONF);
}

int
dmamatch(parent, vcf, aux)
	struct device *parent;
	void *vcf, *aux;
{
	struct cfdata *cf = vcf;
	register struct confargs *ca = aux;
	register struct romaux *ra = &ca->ca_ra;

	if (strcmp(cf->cf_driver->cd_name, ra->ra_name) &&
	    strcmp("espdma", ra->ra_name))
		return (0);
	if (ca->ca_bustype == BUS_SBUS)
		return (1);
	ra->ra_len = NBPG;
	return (probeget(ra->ra_vaddr, 4) != -1);
}

/*
 * Attach all the sub-devices we can find
 */
void
dmaattach(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	register struct confargs *ca = aux;
	struct dma_softc *sc = (void *)self;
#if defined(SUN4C) || defined(SUN4M)
	int node;
	struct confargs oca;
	char *name;
#endif

	if (ca->ca_ra.ra_vaddr == NULL || ca->ca_ra.ra_nvaddrs == 0)
		ca->ca_ra.ra_vaddr =
		    mapiodev(ca->ca_ra.ra_reg, 0, ca->ca_ra.ra_len,
			     ca->ca_bustype);

	sc->sc_regs = (struct dma_regs *) ca->ca_ra.ra_vaddr;

	/*
	 * If we're a ledma, check to see what cable type is currently 
	 * active and set the appropriate bit in the ledma csr so that
	 * it gets used. If we didn't netboot, the PROM won't have the
	 * "cable-selection" property; default to TP and then the user
	 * can change it via a "link0" option to ifconfig.
	 */
	if (strcmp(ca->ca_ra.ra_name, "ledma") == 0) {
		char *cabletype = getpropstring(ca->ca_ra.ra_node,
						"cable-selection");
		if (strcmp(cabletype, "tpe") == 0) {
			sc->sc_regs->csr |= DE_AUI_TP;
		} else if (strcmp(cabletype, "aui") == 0) {
			sc->sc_regs->csr &= ~DE_AUI_TP;
		} else {
			/* assume TP if nothing there */
			sc->sc_regs->csr |= DE_AUI_TP;
		}
		delay(20000);	/* manual says we need 20ms delay */
	}
	
	/*
	 * Get transfer burst size from PROM and plug it into the controller
	 * registers. This is needed on the Sun4m; do others need it too?
	 * XXX
	 */
	if (CPU_ISSUN4M) {
		sc->sc_burst = getpropint(ca->ca_ra.ra_node,"burst-sizes", -1);
		if (sc->sc_burst == -1) {
			/* check parent SBus for burst sizes */
			if (((struct sbus_softc *)parent)->sc_burst == 0)
				sc->sc_burst = SBUS_BURST_32 - 1; /* 1->16 */
			else
				sc->sc_burst = 
					((struct sbus_softc *)parent)->sc_burst;
		}
		sc->sc_regs->csr &= ~D_BURST_SIZE; /* must clear first */
		if (sc->sc_burst & SBUS_BURST_32) {
			sc->sc_regs->csr |= D_BURST_32;
		} else if (sc->sc_burst & SBUS_BURST_16) {
			sc->sc_regs->csr |= D_BURST_16;
		} else if (strcmp(ca->ca_ra.ra_name,"espdma") == 0) {
			/* only espdma supports non-burst */
			sc->sc_regs->csr |= D_BURST_0;
#ifdef DIAGNOSTIC
		} else {
			printf(" <unknown burst size 0x%x>", sc->sc_burst);
#endif
		}
	}

	printf(": rev ");
	sc->sc_rev = sc->sc_regs->csr & D_DEV_ID;
	switch (sc->sc_rev) {
	case DMAREV_0:
		printf("0");
		break;
	case DMAREV_1:
		printf("1");
		break;
	case DMAREV_PLUS:
		printf("1+");
		break;
	case DMAREV_2:
		printf("2");
		break;
	default:
		printf("unknown");
	}
	printf("\n");

	/* indirect functions */
	if (sc->sc_dev.dv_cfdata->cf_attach == &dma_ca) {
		sc->intr = espdmaintr;
	} else {
		sc->intr = ledmaintr;
	}
	sc->enintr = dma_enintr;
	sc->isintr = dma_isintr;
	sc->reset = dma_reset;
	sc->setup = dma_setup;
	sc->go = dma_go;

	sc->sc_node = ca->ca_ra.ra_node;
	if (CPU_ISSUN4)
		goto espsearch;

#if defined(SUN4C) || defined(SUN4M)
	if (ca->ca_bustype == BUS_SBUS)
		sbus_establish(&sc->sc_sd, &sc->sc_dev);

	/* Propagate bootpath */
	if (ca->ca_ra.ra_bp != NULL &&
	    (strcmp(ca->ca_ra.ra_bp->name, "espdma") == 0 ||
	     strcmp(ca->ca_ra.ra_bp->name, "dma") == 0 ||
	     strcmp(ca->ca_ra.ra_bp->name, "ledma") == 0))
		oca.ca_ra.ra_bp = ca->ca_ra.ra_bp + 1;
	else
		oca.ca_ra.ra_bp = NULL;

	/* search through children */
	node = firstchild(sc->sc_node);
	if (node != 0) do {
		name = getpropstring(node, "name");
		if (!romprop(&oca.ca_ra, name, node))
			continue;

		sbus_translate(parent, &oca);
		oca.ca_bustype = BUS_SBUS;
		(void) config_found(&sc->sc_dev, (void *)&oca, dmaprint);
	} while ((node = nextsibling(node)) != 0); else
#endif /* SUN4C || SUN4M */

	if (strcmp(ca->ca_ra.ra_name, "dma") == 0) {
espsearch:
		/*
		 * find the ESP by poking around the esp device structures
		 *
		 * What happens here is that if the esp driver has not been
		 * configured, then this returns a NULL pointer. Then when the
		 * esp actually gets configured, it does the opposing test, and
		 * if the sc->sc_dma field in it's softc is NULL, then tries to
		 * find the matching dma driver.
		 *
		 */
		sc->sc_esp = (struct esp_softc *)
			     getdevunit("esp", sc->sc_dev.dv_unit);

		/*
		 * and a back pointer to us, for DMA
		 */
		if (sc->sc_esp)
			sc->sc_esp->sc_dma = sc;
	}
}

void
dma_reset(sc)
	struct dma_softc *sc;
{
	DMAWAIT(sc);
	DMA_DRAIN(sc);				/* Drain (DMA rev 1) */
	DMACSR(sc) &= ~D_EN_DMA;		/* Stop DMA */
	DMAWAIT1(sc);				/* let things drain */
	DMACSR(sc) |= D_RESET;			/* reset DMA */
	DELAY(200);				/* what should this be ? */
	DMAWAIT1(sc);
	DMACSR(sc) &= ~D_RESET;			/* de-assert reset line */
	DMACSR(sc) |= D_INT_EN;			/* enable interrupts */
	if (sc->sc_rev > DMAREV_1)
		DMACSR(sc) |= D_FASTER;
	sc->sc_active = 0;			/* and of course we aren't */
}


void
dma_enintr(sc)
	struct dma_softc *sc;
{
	sc->sc_regs->csr |= D_INT_EN;
}

int
dma_isintr(sc)
	struct dma_softc *sc;
{
	return (sc->sc_regs->csr & (D_INT_PEND|D_ERR_PEND));
}

#define DMAMAX(a)	(0x01000000 - ((a) & 0x00ffffff))


/*
 * setup a dma transfer
 */
int
dma_setup(sc, addr, len, datain, dmasize)
	struct dma_softc *sc;
	caddr_t *addr;
	size_t *len;
	int datain;
	size_t *dmasize;	/* IN-OUT */
{
	u_long csr;

	/* clear errors and D_TC flag */
	DMAWAIT(sc);
	DMA_DRAIN(sc);		/* ? */
	DMAWAIT1(sc);
	DMACSR(sc) |= D_INVALIDATE;
	DMAWAIT1(sc);

#if 0
	DMACSR(sc) &= ~D_INT_EN;
#endif
	sc->sc_dmaaddr = addr;
	sc->sc_dmalen = len;

	ESP_DMA(("%s: start %d@%p,%d\n", sc->sc_dev.dv_xname,
		*sc->sc_dmalen, *sc->sc_dmaaddr, datain ? 1 : 0));

	/*
	 * the rules say we cannot transfer more than the limit
	 * of this DMA chip (64k for old and 16Mb for new),
	 * and we cannot cross a 16Mb boundary.
	 */
	*dmasize = sc->sc_dmasize =
		min(*dmasize, DMAMAX((size_t) *sc->sc_dmaaddr));

	ESP_DMA(("dma_setup: dmasize = %d\n", sc->sc_dmasize));

	/* Program the DMA address */
	if (CPU_ISSUN4M && sc->sc_dmasize) {
		/*
		 * Use dvma mapin routines to map the buffer into DVMA space.
		 */
		sc->sc_dvmaaddr = *sc->sc_dmaaddr;
		sc->sc_dvmakaddr = kdvma_mapin(sc->sc_dvmaaddr,
					       sc->sc_dmasize, 0);
		if (sc->sc_dvmakaddr == NULL)
			panic("dma: cannot allocate DVMA address");
		DMADDR(sc) = sc->sc_dvmakaddr;
	} else
		DMADDR(sc) = *sc->sc_dmaaddr;

	/* Setup DMA control register */
	csr = DMACSR(sc);
	if (datain)
		csr |= D_WRITE;
	else
		csr &= ~D_WRITE;
	csr |= D_INT_EN;
	DMACSR(sc) = csr;

	return 0;
}

void
dma_go(sc)
	struct dma_softc *sc;
{

	/* Start DMA */
	DMACSR(sc) |= D_EN_DMA;
	sc->sc_active = 1;
}

/*
 * Pseudo (chained) interrupt from the esp driver to kick the
 * current running DMA transfer. I am replying on espintr() to
 * pickup and clean errors for now
 *
 * return 1 if it was a DMA continue.
 */
int
espdmaintr(sc)
	struct dma_softc *sc;
{
	int trans, resid;
	u_long csr;
	csr = DMACSR(sc);

	ESP_DMA(("%s: intr: addr %p, csr %b\n", sc->sc_dev.dv_xname,
		 DMADDR(sc), csr, DMACSRBITS));

	if (csr & D_ERR_PEND) {
		DMACSR(sc) &= ~D_EN_DMA;	/* Stop DMA */
		DMACSR(sc) |= D_INVALIDATE;
		printf("%s: error: csr=%b\n", sc->sc_dev.dv_xname,
			csr, DMACSRBITS);
		return 0;
	}

	/* This is an "assertion" :) */
	if (sc->sc_active == 0)
		panic("dmaintr: DMA wasn't active");

	/* clear errors and D_TC flag */
	DMAWAIT(sc);
	DMA_DRAIN(sc);		/* ? */
	DMAWAIT1(sc);
	DMACSR(sc) |= D_INVALIDATE;
	DMAWAIT1(sc);

	/* DMA has stopped */
	DMACSR(sc) &= ~D_EN_DMA;
	sc->sc_active = 0;

	if (sc->sc_dmasize == 0) {
		/* A "Transfer Pad" operation completed */
		ESP_DMA(("dmaintr: discarded %d bytes (tcl=%d, tcm=%d)\n",
			ESP_READ_REG(sc->sc_esp, ESP_TCL) |
				(ESP_READ_REG(sc->sc_esp, ESP_TCM) << 8),
			ESP_READ_REG(sc->sc_esp, ESP_TCL),
			ESP_READ_REG(sc->sc_esp, ESP_TCM)));
		return 0;
	}

	resid = 0;
	/*
	 * If a transfer onto the SCSI bus gets interrupted by the device
	 * (e.g. for a SAVEPOINTER message), the data in the FIFO counts
	 * as residual since the ESP counter registers get decremented as
	 * bytes are clocked into the FIFO.
	 */
	if (!(csr & D_WRITE) &&
	    (resid = (ESP_READ_REG(sc->sc_esp, ESP_FFLAG) & ESPFIFO_FF)) != 0) {
		ESP_DMA(("dmaintr: empty esp FIFO of %d ", resid));
		ESPCMD(sc->sc_esp, ESPCMD_FLUSH);
	}

	if ((sc->sc_esp->sc_espstat & ESPSTAT_TC) == 0) {
		/*
		 * `Terminal count' is off, so read the residue
		 * out of the ESP counter registers.
		 */
		resid += ( ESP_READ_REG(sc->sc_esp, ESP_TCL) |
			  (ESP_READ_REG(sc->sc_esp, ESP_TCM) << 8) |
			   ((sc->sc_esp->sc_cfg2 & ESPCFG2_FE)
				? (ESP_READ_REG(sc->sc_esp, ESP_TCH) << 16)
				: 0));

		if (resid == 0 && sc->sc_dmasize == 65536 &&
		    (sc->sc_esp->sc_cfg2 & ESPCFG2_FE) == 0)
			/* A transfer of 64K is encoded as `TCL=TCM=0' */
			resid = 65536;
	}

	trans = sc->sc_dmasize - resid;
	if (trans < 0) {			/* transferred < 0 ? */
		printf("%s: xfer (%d) > req (%d)\n",
		    sc->sc_dev.dv_xname, trans, sc->sc_dmasize);
		trans = sc->sc_dmasize;
	}

	ESP_DMA(("dmaintr: tcl=%d, tcm=%d, tch=%d; trans=%d, resid=%d\n",
		ESP_READ_REG(sc->sc_esp, ESP_TCL),
		ESP_READ_REG(sc->sc_esp, ESP_TCM),
		(sc->sc_esp->sc_cfg2 & ESPCFG2_FE)
			? ESP_READ_REG(sc->sc_esp, ESP_TCH) : 0,
		trans, resid));

	if (csr & D_WRITE)
		cache_flush(*sc->sc_dmaaddr, trans);

	if (CPU_ISSUN4M && sc->sc_dvmakaddr)
		dvma_mapout((vm_offset_t)sc->sc_dvmakaddr,
			    (vm_offset_t)sc->sc_dvmaaddr, sc->sc_dmasize);

	*sc->sc_dmalen -= trans;
	*sc->sc_dmaaddr += trans;

#if 0	/* this is not normal operation just yet */
	if (*sc->sc_dmalen == 0 ||
	    sc->sc_esp->sc_phase != sc->sc_esp->sc_prevphase)
		return 0;

	/* and again */
	dma_start(sc, sc->sc_dmaaddr, sc->sc_dmalen, DMACSR(sc) & D_WRITE);
	return 1;
#endif
	return 0;
}

/*
 * Pseudo (chained) interrupt from the le driver to handle DMA
 * errors.
 *
 * XXX: untested
 */
int
ledmaintr(sc)
	struct dma_softc *sc;
{
	u_long csr;

	csr = DMACSR(sc);

	if (csr & D_ERR_PEND) {
		printf("Lance DMA error, see your doctor!\n");
		DMACSR(sc) &= ~D_EN_DMA;	/* Stop DMA */
		DMACSR(sc) |= D_INVALIDATE;
		printf("%s: error: csr=%b\n", sc->sc_dev.dv_xname,
			(u_int)csr, DMACSRBITS);
	}
	return 1;
}