1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
|
/* $OpenBSD: ts102reg.h,v 1.3 2003/06/18 17:50:23 miod Exp $ */
/* $NetBSD: ts102reg.h,v 1.7 2002/09/29 23:23:58 wiz Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Matt Thomas.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SPARC_DEV_TS102REG_H
#define _SPARC_DEV_TS102REG_H
/* The TS102 consumes a 256MB region of the SPARCbook 3's address space.
*/
#define TS102_OFFSET_REGISTERS 0x02000000
#define TS102_OFFSET_CARD_A_ATTR_SPACE 0x04000000
#define TS102_OFFSET_CARD_B_ATTR_SPACE 0x05000000
#define TS102_SIZE_ATTR_SPACE 0x01000000
#define TS102_OFFSET_CARD_A_IO_SPACE 0x06000000
#define TS102_OFFSET_CARD_B_IO_SPACE 0x07000000
#define TS102_SIZE_IO_SPACE 0x01000000
#define TS102_OFFSET_CARD_A_MEM_SPACE 0x08000000
#define TS102_OFFSET_CARD_B_MEM_SPACE 0x0c000000
#define TS102_SIZE_MEM_SPACE 0x04000000
/* There are two separate register blocks within the TS102. The first
* gives access to PCMCIA card specific resources, and the second gives
* access to the microcontroller interface
*/
#define TS102_REG_CARD_A_INT 0x0000 /* Card A Interrupt Register */
#define TS102_REG_CARD_A_STS 0x0004 /* Card A Status Register */
#define TS102_REG_CARD_A_CTL 0x0008 /* Card A Control Register */
#define TS102_REG_CARD_B_INT 0x0010 /* Card B Interrupt Register */
#define TS102_REG_CARD_B_STS 0x0014 /* Card B Status Register */
#define TS102_REG_CARD_B_CTL 0x0018 /* Card B Control Register */
#define TS102_REG_UCTRL_INT 0x0020 /* Microcontroller Interrupt Register */
#define TS102_REG_UCTRL_DATA 0x0024 /* Microcontroller Data Register */
#define TS102_REG_UCTRL_STS 0x0028 /* Microcontroller Status Register */
struct uctrl_regs {
volatile u_int8_t intr; /* Microcontroller Interrupt Reg */
volatile u_int8_t filler0[3];
volatile u_int8_t data; /* Microcontroller Data Reg */
volatile u_int8_t filler1[3];
volatile u_int8_t stat; /* Microcontroller Status Reg */
volatile u_int8_t filler2[3];
};
/* TS102 Card Interrupt Register definitions.
*
* There is one 16-bit interrupt register for each card. Each register
* contains interrupt status (read) and clear (write) bits and an
* interrupt mask for each of the four interrupt sources.
*
* The request bit is the logical AND of the status and the mask bit,
* and indicated and an interrupt is being requested. The mask bits
* allow masking of individual interrupts. An interrupt is enabled when
* the mask is set to 1 and is clear by write a 1 to the associated
* request bit.
*
* The card interrupt register also contain the soft reset flag.
* Setting this bit to 1 will the SPARCbook 3 to be reset.
*/
#define TS102_CARD_INT_RQST_IRQ 0x0001
#define TS102_CARD_INT_RQST_WP_STATUS_CHANGED 0x0002
#define TS102_CARD_INT_RQST_BATTERY_STATUS_CHANGED 0x0004
#define TS102_CARD_INT_RQST_CARDDETECT_STATUS_CHANGED 0x0008
#define TS102_CARD_INT_STATUS_IRQ 0x0010
#define TS102_CARD_INT_STATUS_WP_STATUS_CHANGED 0x0020
#define TS102_CARD_INT_STATUS_BATTERY_STATUS_CHANGED 0x0040
#define TS102_CARD_INT_STATUS_CARDDETECT_STATUS_CHANGED 0x0080
#define TS102_CARD_INT_MASK_IRQ 0x0100
#define TS102_CARD_INT_MASK_WP_STATUS 0x0200
#define TS102_CARD_INT_MASK_BATTERY_STATUS 0x0400
#define TS102_CARD_INT_MASK_CARDDETECT_STATUS 0x0800
#define TS102_CARD_INT_SOFT_RESET 0x1000
/* TS102 Card Status Register definitions. The Card Status Register
* contains card status and control bit.
*/
#define TS102_CARD_STS_PRES 0x0001 /* Card Present (1) */
#define TS102_CARD_STS_IO 0x0002 /* (1) I/O Card, (0) = Mem Card */
#define TS102_CARD_STS_TYPE3 0x0004 /* Type-3 PCMCIA card (disk) */
#define TS102_CARD_STS_VCC 0x0008 /* Vcc (0=5V, 1=3.3V) */
#define TS102_CARD_STS_VPP1_MASK 0x0030 /* Programming Voltage Control2 */
#define TS102_CARD_STS_VPP1_NC 0x0030 /* NC */
#define TS102_CARD_STS_VPP1_VCC 0x0020 /* Vcc (3.3V or 5V) */
#define TS102_CARD_STS_VPP1_VPP 0x0010 /* Vpp (12V) */
#define TS102_CARD_STS_VPP1_0V 0x0000 /* 0V */
#define TS102_CARD_STS_VPP2_MASK 0x00c0 /* Programming Voltage Control1 */
#define TS102_CARD_STS_VPP2_NC 0x00c0 /* NC */
#define TS102_CARD_STS_VPP2_VCC 0x0080 /* Vcc (3.3V or 5V) */
#define TS102_CARD_STS_VPP2_VPP 0x0040 /* Vpp (12V) */
#define TS102_CARD_STS_VPP2_0V 0x0000 /* 0V */
#define TS102_CARD_STS_WP 0x0100 /* Write Protect (1) */
#define TS102_CARD_STS_BVD_MASK 0x0600 /* Battery Voltage Detect */
#define TS102_CARD_STS_BVD_GOOD 0x0600 /* Battery good */
#define TS102_CARD_STS_BVD_LOW_OK 0x0400 /* Battery low, data OK */
#define TS102_CARD_STS_BVD_LOW_SUSPECT1 0x0200 /* Battery low, data suspect */
#define TS102_CARD_STS_BVD_LOW_SUSPECT0 0x0000 /* Battery low, data suspect */
#define TS102_CARD_STS_LVL 0x0800 /* Level (1) / Edge */
#define TS102_CARD_STS_RDY 0x1000 /* Ready (1) / Not Busy */
#define TS102_CARD_STS_VCCEN 0x2000 /* Powered Up (0) */
#define TS102_CARD_STS_RIEN 0x4000 /* Not Supported */
#define TS102_CARD_STS_ACEN 0x8000 /* Access Enabled (1) */
/* TS102 Card Control Register definitions
*/
#define TS102_CARD_CTL_AA_MASK 0x0003 /* Attribute Address A[25:24] */
#define TS102_CARD_CTL_IA_MASK 0x000c /* I/O Address A[25:24] */
#define TS102_CARD_CTL_IA_BITPOS 2 /* */
#define TS102_CARD_CTL_CES_MASK 0x0070 /* CE/address setup time */
#define TS102_CARD_CTL_CES_BITPOS 4 /* n+1 clocks */
#define TS102_CARD_CTL_OWE_MASK 0x0380 /* OE/WE width */
#define TS102_CARD_CTL_OWE_BITPOS 7 /* n+2 clocks */
#define TS102_CARD_CTL_CEH 0x0400 /* Chip enable hold time */
/* (0) - 1 clock */
/* (1) - 2 clocks */
#define TS102_CARD_CTL_SBLE 0x0800 /* SBus little endian */
#define TS102_CARD_CTL_PCMBE 0x1000 /* PCMCIA big endian */
#define TS102_CARD_CTL_RAHD 0x2000 /* Read ahead enable */
#define TS102_CARD_CTL_INCDIS 0x4000 /* Address increment disable */
#define TS102_CARD_CTL_PWRD 0x8000 /* Power down */
/* Microcontroller Interrupt Register
*/
#define TS102_UCTRL_INT_TXE_REQ 0x01 /* transmit FIFO empty */
#define TS102_UCTRL_INT_TXNF_REQ 0x02 /* transmit FIFO not full */
#define TS102_UCTRL_INT_RXNE_REQ 0x04 /* receive FIFO not empty */
#define TS102_UCTRL_INT_RXO_REQ 0x08 /* receive FIFO overflow */
#define TS102_UCTRL_INT_TXE_MSK 0x10 /* transmit FIFO empty */
#define TS102_UCTRL_INT_TXNF_MSK 0x20 /* transmit FIFO not full */
#define TS102_UCTRL_INT_RXNE_MSK 0x40 /* receive FIFO not empty */
#define TS102_UCTRL_INT_RXO_MSK 0x80 /* receive FIFO overflow */
/* TS102 Microcontroller Data Register (only 8 bits are significant).
*/
#define TS102_UCTRL_DATA_MASK 0xff
/* TS102 Microcontroller Status Register.
* read 1 if asserted
* write 1 to clear
*/
#define TS102_UCTRL_STS_TXE_STA 0x01 /* transmit FIFO empty */
#define TS102_UCTRL_STS_TXNF_STA 0x02 /* transmit FIFO not full */
#define TS102_UCTRL_STS_RXNE_STA 0x04 /* receive FIFO not empty */
#define TS102_UCTRL_STS_RXO_STA 0x08 /* receive FIFO overflow */
#define TS102_UCTRL_STS_MASK 0x0F /* Only 4 bits significant */
enum ts102_opcode { /* Argument Returned */
TS102_OP_RD_SERIAL_NUM=0x01, /* none ack + 4 bytes */
TS102_OP_RD_ETHER_ADDR=0x02, /* none ack + 6 bytes */
TS102_OP_RD_HW_VERSION=0x03, /* none ack + 2 bytes */
TS102_OP_RD_UCTLR_VERSION=0x04, /* none ack + 2 bytes */
TS102_OP_RD_MAX_TEMP=0x05, /* none ack + 1 bytes */
TS102_OP_RD_MIN_TEMP=0x06, /* none ack + 1 bytes */
TS102_OP_RD_CURRENT_TEMP=0x07, /* none ack + 1 bytes */
TS102_OP_RD_SYSTEM_VARIANT=0x08, /* none ack + 4 bytes */
TS102_OP_RD_POWERON_CYCLES=0x09, /* none ack + 4 bytes */
TS102_OP_RD_POWERON_SECONDS=0x0a, /* none ack + 4 bytes */
TS102_OP_RD_RESET_STATUS=0x0b, /* none ack + 1 bytes */
#define TS102_RESET_STATUS_RESERVED0 0x00
#define TS102_RESET_STATUS_POWERON 0x01
#define TS102_RESET_STATUS_KEYBOARD 0x02
#define TS102_RESET_STATUS_WATCHDOG 0x03
#define TS102_RESET_STATUS_TIMEOUT 0x04
#define TS102_RESET_STATUS_SOFTWARE 0x05
#define TS102_RESET_STATUS_BROWNOUT 0x06
#define TS102_RESET_STATUS_RESERVED1 0x07
TS102_OP_RD_EVENT_STATUS=0x0c, /* none ack + 2 bytes */
#define TS102_EVENT_STATUS_SHUTDOWN_REQUEST 0x0001
#define TS102_EVENT_STATUS_LOW_POWER_WARNING 0x0002
/* Internal Warning Changed 0x0002 */
#define TS102_EVENT_STATUS_VERY_LOW_POWER_WARNING 0x0004
/* Discharge Event 0x0004 */
#define TS102_EVENT_STATUS_BATT_CHANGED 0x0008
/* Internal Status Changed 0x0008 */
#define TS102_EVENT_STATUS_EXT_KEYBOARD_STATUS_CHANGE 0x0010
#define TS102_EVENT_STATUS_EXT_MOUSE_STATUS_CHANGE 0x0020
#define TS102_EVENT_STATUS_EXTERNAL_VGA_STATUS_CHANGE 0x0040
#define TS102_EVENT_STATUS_LID_STATUS_CHANGE 0x0080
#define TS102_EVENT_STATUS_MICROCONTROLLER_ERROR 0x0100
#define TS102_EVENT_STATUS_RESERVED 0x0200
/* Wakeup 0x0200 */
#define TS102_EVENT_STATUS_EXT_BATT_STATUS_CHANGE 0x0400
#define TS102_EVENT_STATUS_EXT_BATT_CHARGING_STATUS_CHANGE 0x0800
#define TS102_EVENT_STATUS_EXT_BATT_LOW_POWER 0x1000
#define TS102_EVENT_STATUS_DC_STATUS_CHANGE 0x2000
#define TS102_EVENT_STATUS_CHARGING_STATUS_CHANGE 0x4000
#define TS102_EVENT_STATUS_POWERON_BTN_PRESSED 0x8000
TS102_OP_RD_REAL_TIME_CLK=0x0d, /* none ack + 7 bytes */
TS102_OP_RD_EXT_VGA_PORT=0x0e, /* none ack + 1 bytes */
TS102_OP_RD_UCTRL_ROM_CKSUM=0x0f, /* none ack + 2 bytes */
TS102_OP_RD_ERROR_STATUS=0x10, /* none ack + 2 bytes */
#define TS102_ERROR_STATUS_NO_ERROR 0x00
#define TS102_ERROR_STATUS_COMMAND_ERROR 0x01
#define TS102_ERROR_STATUS_EXECUTION_ERROR 0x02
#define TS102_ERROR_STATUS_PHYSICAL_ERROR 0x04
TS102_OP_RD_EXT_STATUS=0x11, /* none ack + 2 bytes */
#define TS102_EXT_STATUS_MAIN_POWER_AVAILABLE 0x0001
#define TS102_EXT_STATUS_INTERNAL_BATTERY_ATTACHED 0x0002
#define TS102_EXT_STATUS_EXTERNAL_BATTERY_ATTACHED 0x0004
#define TS102_EXT_STATUS_EXTERNAL_VGA_ATTACHED 0x0008
#define TS102_EXT_STATUS_EXTERNAL_KEYBOARD_ATTACHED 0x0010
#define TS102_EXT_STATUS_EXTERNAL_MOUSE_ATTACHED 0x0020
#define TS102_EXT_STATUS_LID_DOWN 0x0040
#define TS102_EXT_STATUS_INTERNAL_BATTERY_CHARGING 0x0080
#define TS102_EXT_STATUS_EXTERNAL_BATTERY_CHARGING 0x0100
#define TS102_EXT_STATUS_INTERNAL_BATTERY_DISCHARGING 0x0200
#define TS102_EXT_STATUS_EXTERNAL_BATTERY_DISCHARGING 0x0400
TS102_OP_RD_USER_CONFIG=0x12, /* none ack + 2 bytes */
TS102_OP_RD_UCTRL_VLT=0x13, /* none ack + 1 bytes */
TS102_OP_RD_INT_BATT_VLT=0x14, /* none ack + 1 bytes */
TS102_OP_RD_DC_IN_VLT=0x15, /* none ack + 1 bytes */
TS102_OP_RD_HORZ_PRT_VLT=0x16, /* none ack + 1 bytes */
TS102_OP_RD_VERT_PTR_VLT=0x17, /* none ack + 1 bytes */
TS102_OP_RD_INT_CHARGE_RATE=0x18, /* none ack + 1 bytes */
TS102_OP_RD_EXT_CHARGE_RATE=0x19, /* none ack + 1 bytes */
TS102_OP_RD_RTC_ALARM=0x1a, /* none ack + 7 bytes */
TS102_OP_RD_EVENT_STATUS_NO_RESET=0x1b, /* none ack + 2 bytes */
TS102_OP_RD_INT_KBD_LAYOUT=0x1c, /* none ack + 2 bytes */
TS102_OP_RD_EXT_KBD_LAYOUT=0x1d, /* none ack + 2 bytes */
TS102_OP_RD_EEPROM_STATUS=0x1e, /* none ack + 2 bytes */
#define TS102_EEPROM_STATUS_FACTORY_AREA_CHECKSUM_FAIL 0x01
#define TS102_EEPROM_STATUS_CONSUMER_AREA_CHECKSUM_FAIL 0x02
#define TS102_EEPROM_STATUS_USER_AREA_CHECKSUM_FAIL 0x04
#define TS102_EEPROM_STATUS_VPD_AREA_CHECKSUM_FAIL 0x08
/* Read/Write/Modify Commands
*/
TS102_OP_CTL_LCD=0x20, /* 4 byte mask ack + 4 bytes */
#define TS102_LCD_CAPS_LOCK 0x0001
#define TS102_LCD_SCROLL_LOCK 0x0002
#define TS102_LCD_NUMLOCK 0x0004
#define TS102_LCD_DISK_ACTIVE 0x0008
#define TS102_LCD_LAN_ACTIVE 0x0010
#define TS102_LCD_WAN_ACTIVE 0x0020
#define TS102_LCD_PCMCIA_ACTIVE 0x0040
#define TS102_LCD_DC_OK 0x0080
#define TS102_LCD_COMPOSE 0x0100
TS102_OP_CTL_BITPORT=0x21, /* mask ack + 1 byte */
#define TS102_BITPORT_TFTPWR 0x01 /* TFT power (low) */
#define TS102_BITPORT_SYNCINVA 0x04 /* ext. monitor sync (low) */
#define TS102_BITPORT_SYNCINVB 0x08 /* ext. monitor sync (low) */
#define TS102_BITPORT_BP_DIS 0x10 /* no bootprom from pcmcia (high) */
/* boot from pcmcia (low */
#define TS102_BITPORT_ENCSYNC 0x20 /* enab composite sync (low) */
TS102_OP_CTL_DEV=0x22, /* mask ack + 1 byte */
#define TS102_DEVCTL_CHARGE_DISABLE 0x01 /* dis/en charging */
#define TS102_DEVCTL_POINTER_DISABLE 0x04 /* dis/en pointer */
#define TS102_DEVCTL_KEYCLICK 0x08 /* keyclick? */
#define TS102_DEVCTL_INT_BTNCLICK 0x10 /* internal button click? */
#define TS102_DEVCTL_EXT_BTNCLICK 0x20 /* ext. button click?? */
TS102_OP_CTL_SPEAKER_VOLUME=0x23, /* mask ack + 1 byte */
TS102_OP_CTL_TFT_BRIGHTNESS=0x24, /* mask ack + 1 byte */
TS102_OP_CTL_WATCHDOG=0x25, /* mask ack + 1 byte */
TS102_OP_CTL_FCTRY_EEPROM=0x26, /* mask ack + 1 byte */
TS102_OP_CTL_SECURITY_KEY=0x27, /* no idea */
TS102_OP_CTL_KDB_TIME_UNTL_RTP=0x28, /* mask ack + 1 byte */
TS102_OP_CTL_KBD_TIME_BTWN_RPTS=0x29, /* mask ack + 1 byte */
TS102_OP_CTL_TIMEZONE=0x2a, /* mask ack + 1 byte */
TS102_OP_CTL_MARK_SPACE_RATIO=0x2b, /* mask ack + 1 byte */
TS102_OP_CTL_MOUSE_SENS=0x2c, /* mask ack + 1 byte */
TS102_OP_CTL_MOUSE_SCAN=0x2d, /* no idea invalid?*/
TS102_OP_CTL_DIAGNOSTIC_MODE=0x2e, /* mask ack + 1 byte */
#define TS102_DIAGNOSTIC_MODE_CMD_DIAG_ON_LCD 0x01
#define TS102_DIAGNOSTIC_MODE_KDB_MS_9600 0x02
TS102_OP_CTL_SCREEN_CONTRAST=0x2f, /* mask ack + 1 byte */
/* Commands returning no status
*/
TS102_OP_CMD_RING_BELL=0x30, /* msb,lsb ack */
TS102_OP_RD_INPUT_SOURCE=0x31, /* no idea */
TS102_OP_CMD_DIAGNOSTIC_STATUS=0x32, /* msb,lsb ack */
TS102_OP_CMD_CLR_KEY_COMBO_TBL=0x33, /* none ack */
TS102_OP_CMD_SOFTWARE_RESET=0x34, /* none ack */
TS102_OP_CMD_SET_RTC=0x35, /* smhddmy ack */
TS102_OP_CMD_RECAL_PTR=0x36, /* none ack */
TS102_OP_CMD_SET_BELL_FREQ=0x37, /* msb,lsb ack */
TS102_OP_CMD_SET_INT_BATT_RATE=0x39, /* charge-lvl ack */
TS102_OP_CMD_SET_EXT_BATT_RATE=0x3a, /* charge-lvl ack */
TS102_OP_CMD_SET_RTC_ALARM=0x3b, /* smhddmy ack */
/* Block transfer commands
*/
TS102_OP_BLK_RD_EEPROM=0x40, /* len off ack <data> */
TS102_OP_BLK_WR_EEPROM=0x41, /* len off <data> ack */
TS102_OP_BLK_WR_STATUS=0x42, /* len off <data> ack */
TS102_OP_BLK_DEF_SPCL_CHAR=0x43, /* len off <8b data> ack */
#define TS102_BLK_OFF_DEF_WAN1 0
#define TS102_BLK_OFF_DEF_WAN2 1
#define TS102_BLK_OFF_DEF_LAN1 2
#define TS102_BLK_OFF_DEF_LAN2 3
#define TS102_BLK_OFF_DEF_PCMCIA 4
#define TS102_BLK_OFF_DEF_DC_GOOD 5
#define TS102_BLK_OFF_DEF_BACKSLASH 6
/* Generic commands
*/
TS102_OP_GEN_DEF_KEY_COMBO_ENT=0x50, /* seq com-length ack */
TS102_OP_GEN_DEF_STRING_TBL_ENT=0x51, /* str-code len <str> ack */
TS102_OP_GEN_DEF_STS_CTRN_DISP=0x52, /* len <msg> ack */
/* Generic commands with optional status
*/
TS102_OP_GEN_STS_EMU_COMMAND=0x64, /* <command> ack */
TS102_OP_GEN_STS_RD_EMU_REGISTER=0x65, /* reg ack + 1 byte */
TS102_OP_GEN_STS_WR_EMU_REGISTER=0x66, /* reg,val ack */
TS102_OP_GEN_STS_RD_EMU_RAM=0x67, /* addr ack + 1 byte */
TS102_OP_GEN_STS_WR_EMU_RAM=0x68, /* addr,val ack */
TS102_OP_GEN_STS_RD_BQ_REGISTER=0x69, /* reg ack + 1 byte */
TS102_OP_GEN_STS_WR_BQ_REGISTER=0x6a, /* reg,val ack */
/* Administration commands
*/
TS102_OP_ADMIN_SET_USER_PASS=0x70, /* len <pass> ack */
TS102_OP_ADMIN_VRFY_USER_PASS=0x71, /* len <pass> ack + status */
TS102_OP_ADMIN_GET_SYSTEM_PASS=0x72, /* none ack + <7bytekey> */
TS102_OP_ADMIN_VRFY_SYSTEM_PASS=0x73, /* len <pass> ack + status */
TS102_OP_RD_INT_CHARGE_LEVEL=0x7a, /* ack + 2 byte */
TS102_OP_RD_EXT_CHARGE_LEVEL=0x7b, /* ack + 2 byte */
TS102_OP_SLEEP=0x80, /* supposedly sleeps, not sure */
TS102_OP_ADMIN_POWER_OFF=0x82, /* len <pass> none */
TS102_OP_ADMIN_POWER_RESTART=0x83, /* msb,xx,lsb none */
};
#endif /* _SPARC_DEV_TS102REG_H */
|
