1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
/* $OpenBSD: atavar.h,v 1.5 2000/04/10 07:06:16 csapuntz Exp $ */
/* $NetBSD: atavar.h,v 1.13 1999/03/10 13:11:43 bouyer Exp $ */
/*
* Copyright (c) 1998 Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/* Hight-level functions and structures used by both ATA and ATAPI devices */
struct ataparams;
/* Datas common to drives and controller drivers */
struct ata_drive_datas {
u_int8_t drive; /* drive number */
int8_t ata_vers; /* ATA version supported */
u_int16_t drive_flags; /* bitmask for drives present/absent and cap */
#define DRIVE_ATA 0x0001
#define DRIVE_ATAPI 0x0002
#define DRIVE_OLD 0x0004
#define DRIVE (DRIVE_ATA|DRIVE_ATAPI|DRIVE_OLD)
#define DRIVE_CAP32 0x0008
#define DRIVE_DMA 0x0010
#define DRIVE_UDMA 0x0020
#define DRIVE_MODE 0x0040 /* the drive reported its mode */
#define DRIVE_RESET 0x0080 /* reset the drive state at next xfer */
#define DRIVE_DMAERR 0x0100 /* Udma transfer had crc error, don't try DMA */
#define DRIVE_DSCBA 0x0200 /* DSC in buffer availability mode */
#define DRIVE_DSCWAIT 0x0400 /* In wait for DSC to be asserted */
/*
* Current setting of drive's PIO, DMA and UDMA modes.
* Is initialised by the disks drivers at attach time, and may be
* changed later by the controller's code if needed
*/
u_int8_t PIO_mode; /* Current setting of drive's PIO mode */
u_int8_t DMA_mode; /* Current setting of drive's DMA mode */
u_int8_t UDMA_mode; /* Current setting of drive's UDMA mode */
/* Supported modes for this drive */
u_int8_t PIO_cap; /* supported drive's PIO mode */
u_int8_t DMA_cap; /* supported drive's DMA mode */
u_int8_t UDMA_cap; /* supported drive's UDMA mode */
/*
* Drive state. This is drive-type (ATA or ATAPI) dependant
* This is reset to 0 after a channel reset.
*/
u_int8_t state;
#define ACAP_LEN 0x01 /* 16 byte commands */
#define ACAP_DSC 0x02 /* use DSC signalling */
/* 0x20-0x40 reserved for ATAPI_CFG_DRQ_MASK */
u_int8_t atapi_cap;
/* Number of DMA errors. Reset to 0 after every successful transfers. */
u_int8_t n_dmaerrs;
/* downgrade mode after this many successive errors */
#define NERRS_MAX 2
char drive_name[31];
int cf_flags;
void *chnl_softc; /* channel softc */
};
/* ATA/ATAPI common attachement datas */
struct ata_atapi_attach {
u_int8_t aa_type; /* Type of device */
#define T_ATA 0
#define T_ATAPI 1
u_int8_t aa_channel; /* controller's channel */
u_int8_t aa_openings; /* Number of simultaneous commands possible */
struct ata_drive_datas *aa_drv_data;
void *aa_bus_private; /* infos specifics to this bus */
};
/* User config flags that force (or disable) the use of a mode */
#define ATA_CONFIG_PIO_MODES 0x0007
#define ATA_CONFIG_PIO_SET 0x0008
#define ATA_CONFIG_PIO_OFF 0
#define ATA_CONFIG_DMA_MODES 0x0070
#define ATA_CONFIG_DMA_SET 0x0080
#define ATA_CONFIG_DMA_DISABLE 0x0070
#define ATA_CONFIG_DMA_OFF 4
#define ATA_CONFIG_UDMA_MODES 0x0700
#define ATA_CONFIG_UDMA_SET 0x0800
#define ATA_CONFIG_UDMA_DISABLE 0x0700
#define ATA_CONFIG_UDMA_OFF 8
/*
* ATA/ATAPI commands description
*
* This structure defines the interface between the ATA/ATAPI device driver
* and the controller for short commands. It contains the command's parameter,
* the len of data's to read/write (if any), and a function to call upon
* completion.
* If no sleep is allowed, the driver can poll for command completion.
* Once the command completed, if the error registed is valid, the flag
* AT_ERROR is set and the error register value is copied to r_error .
* A separate interface is needed for read/write or ATAPI packet commands
* (which need multiple interrupts per commands).
*/
struct wdc_command {
u_int8_t r_command; /* Parameters to upload to registers */
u_int8_t r_head;
u_int16_t r_cyl;
u_int8_t r_sector;
u_int8_t r_count;
u_int8_t r_precomp;
u_int8_t r_st_bmask; /* status register mask to wait for before command */
u_int8_t r_st_pmask; /* status register mask to wait for after command */
u_int8_t r_error; /* error register after command done */
volatile u_int16_t flags;
#define AT_READ 0x0001 /* There is data to read */
#define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */
#define AT_WAIT 0x0008 /* wait in controller code for command completion */
#define AT_POLL 0x0010 /* poll for command completion (no interrupts) */
#define AT_DONE 0x0020 /* command is done */
#define AT_ERROR 0x0040 /* command is done with error */
#define AT_TIMEOU 0x0080 /* command timed out */
#define AT_DF 0x0100 /* Drive fault */
#define AT_READREG 0x0200 /* Read registers on completion */
int timeout; /* timeout (in ms) */
void *data; /* Data buffer address */
int bcount; /* number of bytes to transfer */
void (*callback) __P((void*)); /* command to call once command completed */
void *callback_arg; /* argument passed to *callback() */
};
extern int at_poll;
int wdc_exec_command __P((struct ata_drive_datas *, struct wdc_command*));
#define WDC_COMPLETE 0x01
#define WDC_QUEUED 0x02
#define WDC_TRY_AGAIN 0x03
void wdc_probe_caps __P((struct ata_drive_datas*, struct ataparams *));
void wdc_print_caps __P((struct ata_drive_datas*));
int wdc_downgrade_mode __P((struct ata_drive_datas*));
void wdc_reset_channel __P((struct ata_drive_datas *));
int wdc_ata_addref __P((struct ata_drive_datas *));
void wdc_ata_delref __P((struct ata_drive_datas *));
struct ataparams;
int ata_get_params __P((struct ata_drive_datas*, u_int8_t,
struct ataparams *));
int ata_set_mode __P((struct ata_drive_datas*, u_int8_t, u_int8_t));
/* return code for these cmds */
#define CMD_OK 0
#define CMD_ERR 1
#define CMD_AGAIN 2
void ata_perror __P((struct ata_drive_datas *, int, char *));
|
