summaryrefslogtreecommitdiff
path: root/sys/dev/ic/bcwreg.h
blob: f674bbf2845b4f275401d884f048dce81c3c12fd (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
/*	$OpenBSD: bcwreg.h,v 1.14 2007/02/22 17:04:31 mglocker Exp $ */

/*
 * Copyright (c) 2006 Jon Simola <jsimola@gmail.com>
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

/* Broadcom BCM43xx */

/* PCI registers defined in the PCI 2.2 spec. */
#define BCW_PCI_BAR0			0x10

/* Saved Interrupt mask */
#define BCW_SAVEDINTRMASK		0xb007a864

/* Sonics SB register access */
#define BCW_ADDR_SPACE0			0x80
#define BCW_ADDR_SPACE1			0x84
#define BCW_REG0_WIN			0x80
#define BCW_REG1_WIN			0x84
#define BCW_SPROM_CONTROL		0x88
#define BCW_ADDR1_BURST_CONTROL		0x8C
#define	BCW_PCII			0x90
#define BCW_PCICR			0x94
#define BCW_BI				0x98
#define BCW_PCICI			0xB0
#define BCW_PCICO			0xB4
#define BCW_PCICOE			0xB8
#define BCW_GPIOI			0xB0 /* GPIO IN */
#define BCW_GPIOO			0xB4 /* GPIO OUT */
#define BCW_GPIOE			0xB8 /* GPIO ENABLE */

/* Some bitmasks */
#define BCW_XTALPOWERUP			0x40
#define BCW_PLLPOWERDOWN		0x80

/* Core select address macro */
#define BCW_CORE_SELECT(x)		(0x18000000 + (x * 0x1000))

/* Some Core Types */
#define BCW_CORE_COMMON			0x800
#define BCW_CORE_PCI			0x804
#define BCW_CORE_ENET			0x806
#define BCW_CORE_PCMCIA			0x80d
#define BCW_CORE_80211			0x812
#define BCW_CORE_PCIE			0x820
#define BCW_CORE_MIMOPHY		0x821
#define BCW_CORE_NONEXIST		0x8ff

#define BCW_CORE_COMMON_CHIPID		0x0

#define BCW_SONICS_WIN			0x18002000

/* Sonics PCI control */
#define BCW_SPCI_TR2			0x0108	/* Sonics to PCI translation
					         * 2 */
/* bit defines */
#define SBTOPCI_PREF			0x4	/* prefetch enable */
#define SBTOPCI_BURST			0x8	/* burst enable */
#define BCW_SBINTVEC			0x0f94
/* interrupt bits */
#define SBIV_ENET0			0x02	/* enable for enet 0 */
#define SBIV_ENET1			0x40	/* enable for enet 1 */

/* Host Interface Registers */

#define BCW_DEVCTL			0x0000		/* device control */
/* device control bits */
#define BCW_DC_IP			0x00000400	/* internal phy present */
#define BCW_DC_ER			0x00008000	/* ephy reset */
/* Interrupt Control */
#define BCW_INT_STS			0x0020
#define BCW_INT_MASK			0x0024
/* bits for both status, and mask */
#define I_TO				0x00000080	/* general timeout */
#define I_PC				0x00000400	/* descriptor error */
#define I_PD				0x00000800	/* data error */
#define I_DE				0x00001000	/* desc. protocol error */
#define I_RU				0x00002000	/* rx desc. underflow */
#define I_RO				0x00004000	/* rx fifo overflow */
#define I_XU				0x00008000	/* tx fifo underflow */
#define I_RI				0x00010000	/* receive interrupt */
#define I_XI				0x01000000	/* transmit interrupt */

/* Ethernet MAC Control */
#define BCW_MACCTL			0x00A8	/* ethernet mac control */
/* mac control bits */
#define BCW_EMC_CRC32_ENAB		0x00000001	/* crc32 generation */
#define BCW_EMC_PDOWN			0x00000004	/* PHY powerdown */
#define BCW_EMC_EDET			0x00000008	/* PHY energy detect */
#define BCW_EMC_LED			0x000000e0	/* PHY LED control */

/* DMA Interrupt control */
#define BCW_DMAI_CTL			0x0100

/* DMA registers */
#define BCW_DMA_TXCTL			0x0200	/* transmit control */
/* transmit control bits */
#define XC_XE				0x1	/* transmit enable */
#define XC_LE				0x4	/* loopback enable */
#define BCW_DMA_TXADDR			0x0204	/* tx ring base address */
#define BCW_DMA_DPTR			0x0208	/* last tx descriptor */
//#define BCW_DMA_TXSTATUS		0x020C	/* active desc, etc */
#define BCW_DMA_RXCTL			0x0210	/* enable, etc */
#define BCW_DMA_RXADDR			0x0214	/* rx ring base address */
#define BCW_DMA_RXDPTR			0x0218	/* last descriptor */
//#define BCW_DMA_RXSTATUS		0x021C	/* active desc, etc */
/* receive status bits */
#define RS_CD_MASK			0x0fff	/* current descriptor pointer */
#define RS_DMA_IDLE			0x2000	/* DMA is idle */
#define RS_ERROR			0xf0000	/* had an error */

/* Ethernet MAC control registers */
#define BCW_RX_CTL			0x0400		/* receive config */
/* config bits */
#define ERC_DB				0x00000001	/* disable broadcast */
#define ERC_AM				0x00000002	/* rx all multicast */
#define ERC_PE				0x00000008	/* promiscuous enable */

#define BCW_RX_MAX			0x0404		/* max packet length */
#define BCW_TX_MAX			0x0408
#define BCW_MI_CTL			0x0410
#define BCW_MI_COMM			0x0414
#define BCW_MI_STS			0x041C
/* mii status bits */
#define BCW_MIINTR			0x00000001	/* mii mdio interrupt */

#define BCW_FILT_LOW			0x0420		/* mac low 4 bytes */
#define BCW_FILT_HI			0x0424		/* mac hi 2 bytes */
#define BCW_FILT_CTL			0x0428		/* packet filter ctrl */
#define BCW_ENET_CTL			0x042C
/* bits for mac control */
#define EC_EE				0x00000001	/* emac enable */
#define EC_ED				0x00000002	/* disable emac */
#define EC_ES				0x00000004	/* soft reset emac */
#define EC_EP				0x00000008	/* external phy */
#define BCW_TX_CTL			0x0430
/* bits for transmit control */
#define EXC_FD				0x00000001	/* full duplex */
#define BCW_TX_WATER			0x0434		/* tx watermark */

/* statistics counters */
#define BCW_RX_PKTS			0x058C

/* SiliconBackplane registers 0xea8 through 0xffc */
#define BCW_SBTPSFLAG			0x0f18
#define SBTPS_BACKPLANEFLAGMASK		0x3f
#define SBTPS_INT_ALWAYS		0x40		/* Interrupt always sent on backplane */
#define BCW_SBIMSTATE			0x0f90
#define SBIM_REJECT			0x0200000
#define SBIM_INBANDERR			0x20000		/* Inband Error */
#define SBIM_TIMEOUT			0x40000		/* Timeout */
#define BCW_SBTMSTATELOW		0x0f98
#define SBTML_RESET			0x1		/* reset */
#define SBTML_REJ			0x6		/* reject */
#define SBTML_REJ22			0x2		/* v2.2 Reject bit */
#define SBTML_REJ23			0x4		/* v2.3 Reject bit */
#define SBTML_CLK			0x10000		/* clock enable */
#define SBTML_FGC			0x20000		/* force gated clocks on */
#define SBTML_80211FLAG			0x40000		/* core specific flag */
#define SBTML_80211PHY			0x20000000	/* Attach PHY */
#define BCW_SBTMSTATEHI			0x0f9C
#define SBTMH_SERR			0x1		/* S Error */
#define SBTMH_INT			0x2
#define SBTMH_BUSY			0x4

#define BCW_CIR_SBID_LO			0xff8
#define BCW_CIR_SBID_LO_INITIATOR	0x80
#define SBREV_MASK			0xf0000000	/* 1 = v2.3, 0 <= v2.2 */
#define SBREV_MASK_SHIFT		28
#define BCW_CIR_SBID_HI			0xffc

/*
 * MMIO Registers by offset, followed by indented bitmasks
 */
#define BCW_SPROM_CONTROL		0x88		/* SPROM Control register */

#define BCW_SBF				0x120		/* MIMO - Status Bit Field */
#define BCW_SBF_MAC_ENABLED		0x00000001	/* Set when mac enabled */
#define BCW_SBF_CORE_READY		0x00000004	/* set after core reset/enabled */
#define BCW_SBF_400_MAGIC		0x00000400	/* MAGIC */
#define BCW_SBF_REGISTER_BYTESWAP	0x00010000	/* xfer regs are byteswapped in hw */
#define  BCW_SBF_ADHOC			0x00020000	/* Operating mode is not adhoc */
#define BCW_SBF_AP			0x00040000	/* Device is in AP mode */
#define BCW_SBF_RADIOREG_LOCK		0x00080000	/* Radio Registers locked for use */
#define BCW_SBF_MONITOR			0x00400000	/* Pass HW handled control frames 
							 * to driver, needs PROMISC also */
#define BCW_SBF_PROMISC			0x01000000	/* Device is in promiscuous mode */
#define BCW_SBF_PS1			0x02000000	/* Power saving bit 1 - unknown */
#define BCW_SBF_PS2			0x04000000	/*  bit 2 - Device is awake */
#define BCW_SBF_SSID_BCAST		0x08000000	/* set = SSID bcast is disabled
							 * unset = SSID bcast enabled */
#define BCW_SBF_TIME_UPDATE		0x10000000	/* Related to TSF updates */

#define BCW_GIR				0x128	/* MIMO - Generic Interrupt Reason */
#define BCW_MMIO_RAM_CONTROL		0x130
#define BCW_MMIO_RAM_DATA		0x134

#define BCW_SHM_CONTROL			0x160	/* Control */
#define BCW_SHM_DATA			0x164	/* Data - 32bit */
#define BCW_SHM_DATALOW			0x164	/* Data Low - 16bit */
#define BCW_SHM_DATAHIGH		0x166	/* Data High - 16 bit */
#define BCW_SHM_CONTROL_SHARED		0x0001	/* Select SHM Routing shared memory */
#define BCW_SHM_CONTROL_80211		0x0002	/* Select 80211 settings */
#define BCW_SHM_CONTROL_PCM		0x0003	/* Select PCM data */
#define BCW_SHM_CONTROL_HWMAC		0x0004	/* Security Hardware MAC Address list */
#define BCW_SHM_CONTROL_MCODE		0x0300	/* Microcode */
#define BCW_SHM_CONTROL_INIMCODE	0x0301	/* Initial Value Microcode? */
/* SHM Addresses */
#define BCW_SHM_MICROCODEFLAGSLOW	0x005e	/* Flags for Microcode ops */
#define BCW_SHM_MICROCODEFLAGSHIGH	0x0060	/* Flags for Microcode ops */
/* http://bcm-specs.sipsolutions.net/MicrocodeFlagsBitfield */

/* 0x200 DMA Register space, there are 6 controllers */
/* 32 bit DMA controllers */
#define BCW_DMA_TXCONTROL(x)		(0x200 + (x * 0x20))
						/* DMA Control Word*/
#define BCW_DMA_TXRINGADDR(x)		(0x204 + (x * 0x20))
						/* Ring Address */
#define BCW_DMA_TXSTOPADDR(x)		(0x208 + (x * 0x20))
						/* Last Descriptor */
#define BCW_DMA_TXSTATUS(x)		(0x20c + (x * 0x20))
						/* Transmit Status Word */
#define BCW_DMA_RXCONTROL(x)		(0x200 + (x * 0x20))
						/* DMA Control Word*/
#define BCW_DMA_RXRINGADDR(x)		(0x204 + (x * 0x20))
						/* Ring Address */
#define BCW_DMA_RXSTOPADDR(x)		(0x208 + (x * 0x20))
						/* Last descriptor */
#define BCW_DMA_RXSTATUS(x)		(0x20c + (x * 0x20))
						/* Receive Status Word */
/* 64 bit DMA controllers */
#define BCW_DMA64_TXCONTROL(x)		(0x200 + (x * 0x40))
						/* DMA control Word */
#define BCW_DMA64_TXSTOPADDR(x)		(0x204 + (x * 0x40))
						/* Last Descriptor */
#define BCW_DMA64_TXRINGADDRLOW(x)	(0x208 + (x * 0x40))
						/* Low 32 bits Ring Address */
#define BCW_DMA64_TXRINGADDRHIGH(x)	(0x20c + (x * 0x40))
						/* High 32 bits Ring Address */
#define BCW_DMA64_TXSTATUS(x)		(0x210 + (x * 0x40))
						/* Transmit Status State */
#define BCW_DMA64_TXERROR(x)		(0x214 + (x * 0x40))
						/* Transmit Status Error */
#define BCW_DMA64_RXCONTROL(x)		(0x220 + (x * 0x40))
						/* DMA control Word */
#define BCW_DMA64_RXSTOPADDR(x)		(0x224 + (x * 0x40))
						/* Last Descriptor */
#define BCW_DMA64_RXRINGADDRLOW(x)	(0x228 + (x * 0x40))
						/* Low 32 bits Ring Address */
#define BCW_DMA64_RXRINGADDRHIGH(x)	(0x22c + (x * 0x40))
						/* High 32 bits Ring Address */
#define BCW_DMA64_RXSTATUS(x)		(0x230 + (x * 0x40))
						/* Transmit Status State */
#define BCW_DMA64_RXERROR(x)		(0x234 + (x * 0x40))
						/* Transmit Status Error */

#define BCW_DMA_CONTROL_ENABLE		0x1	/* Enable */
#define BCW_DMA_CONTROL_SUSPEND		0x2	/* Suspend Request */
#define BCW_DMA_CONTROL_LOOPBACK	0x4	/* Loopback Enable */
#define BCW_DMA_CONTROL_FLUSH		0x10	/* Flush Request */
#define BCW_DMA_CONTROL_ADDREXT		0x30000	/* Address Extension */

/* 0x300 PIO Register space */
#define BCW_RADIO_BASEBAND		0x3e6	/* Baseband Attenuation */
#define BCW_RADIO_CONTROL		0x3f6	/* Control - 16bit */
#define BCW_RADIO_DATA			0x3fa	/* Data - 16bit */
#define BCW_RADIO_DATALOW		0x3fa	/* Data Low - 16bit */
#define BCW_RADIO_DATAHIGH		0x3f8	/* Data High - 16 bit */
#define BCW_RADIO_ID			0x01	/* Radio ID offset */

#define BCW_PHY_CONTROL			0x3fc	/* Control - 16bit */
#define BCW_PHY_DATA			0x3fe	/* Data - 16bit */

/* SPROM registers are 16 bit and based at MMIO offset 0x1000 */
#define BCW_MMIO_BASE			0x1000
#define BCW_SPROM_SUBPRODID		0x1004	/* Subsystem Product ID */
#define BCW_SPROM_SUBVENID		0x1006	/* Subsystem Vendor ID */
#define BCW_SPROM_PRODID		0x1008	/* Product ID */
#define BCW_SPROM_IL0MACADDR		0x1048	/* 802.11b/g MAC */
#define BCW_SPROM_ET0MACADDR		0x104e	/* ethernet MAC */
#define BCW_SPROM_ET1MACADDR		0x1054	/* 802.11a MAC */

#define BCW_SPROM_PA0B0			0x105e
#define BCW_SPROM_PA0B1			0x1060
#define BCW_SPROM_PA0B2			0x1062
#define BCW_SPROM_PAMAXPOWER		0x1066	/* 7-0 for A, 15-8 for B/G */
#define BCW_SPROM_PA1B0			0x106a
#define BCW_SPROM_PA1B1			0x106c
#define BCW_SPROM_PA1B2			0x106e
#define BCW_SPROM_IDLETSSI		0x1070  /* As below */
#define BCW_SPROM_BOARDFLAGS		0x1072	/* lower 16 bits */
#define BCW_BF_BTCOEXIST		0x0001	/* Bluetooth Co-existance */
#define BCW_BF_PACTRL			0x0002	/* GPIO 9 controls PA */
#define BCW_BF_AIRLINEMODE		0x0004	/* GPIO13 -> radio off LED */
#define BCW_BF_RSSI			0x0008	/* "something RSSI related */
#define BCW_BF_ENETSPI			0x0010	/* EPHY Roboswitch SPI */
#define BCW_BF_XTAL			0x0020	/* XTAL doesn't slow clock */
#define BCW_BF_CCKHIPWR			0x0040	/* HiPower CCK xmission */
#define BCW_BF_ENETADM			0x0080	/* has ADMtek Switch */
#define BCW_BF_ENETVLAN			0x0100	/* VLAN capable - huh? */
#define BCW_BF_AFTERBURNER		0x0200	/* Afterburner capable */
#define BCW_BF_NOPCI			0x0400	/* Board leaves PCI floating */
#define BCW_BF_FEM			0x0800	/* Front End Module support */
#define BCW_BF_EXTLNA			0x1000	/* has external LNA */
#define BCW_BF_HGPA			0x2000	/* has High Gain PA */
#define BCW_BF_BTCMOD			0x4000	/* BTCOEXIST in alt GPIOs */
#define BCW_BF_ALTIQ			0x8000	/* Alternate I/Q settings */

#define BCW_SPROM_ANTGAIN		0x1074	/* bits 7-0 for an A PHY
						   bits 15-8 for B/G PHYs */

#define BCW_PHY_TYPEA			0x0	/* 802.11a PHY */
#define BCW_PHY_TYPEB			0x1	/* 802.11b PHY */
#define BCW_PHY_TYPEG			0x2	/* 802.11g PHY */
#define BCW_PHY_TYPEN			0x4	/* 802.11n PHY */

/* generic interrupt reasons */
#define BCW_INTR_READY			(1 << 0)

/* firmware revision informations */
#define BCW_UCODE_REVISION		0x0000
#define BCW_UCODE_PATCHLEVEL		0x0002
#define BCW_UCODE_DATE			0x0004
#define BCW_UCODE_TIME			0x0006
#define BCW_UCODE_STATUS		0x0040

/* GPIO */
#define BCW_GPIO_MASK			0x49e
#define BCW_GPIO_CTRL			0x6c

#define BCW_MMIO_PHY_RADIO		0x3e2
#define BCW_MMIO_CHANNEL		0x3f0
#define BCW_MMIO_CHANNEL_EXT		0x3f4

/* LEDS */
#define BCW_NR_LEDS			4

/* PHY registers */
#define BCW_PHY_G_LO_CONTROL		0x0810
#define BCW_PHY_ILT_A_CTRL		0x0072
#define BCW_PHY_ILT_A_DATA1		0x0073
#define BCW_PHY_ILT_G_CTRL		0x0472
#define BCW_PHY_ILT_G_DATA1		0x0473
#define BCW_PHY_G_CRS			0x0429
#define BCW_PHY_NRSSILT_CTRL		0x0803
#define BCW_PHY_NRSSILT_DATA		0x0804
#define BCW_PHY_G_PCTL			0x0029

#define BCW_READ16(sc, reg) \
	bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, (reg))
#define BCW_READ(sc, reg) \
	bus_space_read_4((sc)->sc_iot, (sc)->sc_ioh, (reg))
#define BCW_WRITE16(sc, reg, val) \
	bus_space_write_2((sc)->sc_iot, (sc)->sc_ioh, (reg), (val))
#define BCW_WRITE(sc, reg, val) \
	bus_space_write_4((sc)->sc_iot, (sc)->sc_ioh, (reg), (val))