path: root/sys/dev/ic/bcwvar.h

/*	$OpenBSD: bcwvar.h,v 1.21 2007/02/23 19:44:37 mglocker Exp $ */

/*
 * Copyright (c) 2006 Jon Simola <jsimola@gmail.com>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

/*
 * Broadcom BCM43xx Wireless network chipsets (broadcom.com)
 * SiliconBackplane is technology from Sonics, Inc.(sonicsinc.com)
 *
 * Cliff Wright cliff@snipe444.org
 */

struct fwheader {
	char	filename[64];
	int	filesize;
	int	fileoffset;
};

struct bcw_initval {
        uint16_t	offset;
        uint16_t	size;
        uint32_t	value;
} __packed;

struct bcw_led {
	uint8_t		behaviour:7;
	uint8_t		activelow:1;
	unsigned long	blink_interval;
};
enum {
	BCW_LED_OFF,
	BCW_LED_ON,
	BCW_LED_ACTIVITY,
	BCW_LED_RADIO_ALL,
	BCW_LED_RADIO_A,
	BCW_LED_RADIO_B,
	BCW_LED_MODE_BG,
	BCW_LED_TRANSFER,
	BCW_LED_APTRANSFER,
	BCW_LED_WEIRD, /* FIXME */
	BCW_LED_ASSOC,
	BCW_LED_INACTIVE,

	/*
	 * Behaviour values for testing.
	 * With these values it is easier to figure out
	 * the real behaviour of leds, in case the SPROM
	 * is missing information.
	 */
	BCW_LED_TEST_BLINKSLOW,
	BCW_LED_TEST_BLINKMEDIUM,
	BCW_LED_TEST_BLINKFAST,

	/* misc values for BCM4303 */
	BCW_LED_BCM4303_0 = 0x2B,
	BCW_LED_BCM4303_1 = 0x78,
	BCW_LED_BCM4303_2 = 0x2E,
	BCW_LED_BCM4303_3 = 0x19,
};

#define BCW_RADIO_INTERFMODE_NONWLAN	1
#define BCW_RADIO_DEFAULT_CHANNEL_A	36
#define BCW_RADIO_DEFAULT_CHANNEL_BG	6
#define BCW_RADIO_MAX			2
struct bcw_radio {
	uint16_t	id;
	uint16_t	info;
	u_char		enabled;
};

#define BCW_MAX_CORES		10
struct bcw_core {
	uint16_t	id;
	uint8_t		num;
	uint8_t		rev;
	uint8_t		backplane_flag;
};

/* number of descriptors used in a ring */
#define BCW_RX_RING_COUNT	128
#define BCW_TX_RING_COUNT	128
#define BCW_MAX_SCATTER		8	/* XXX unknown, wild guess */

struct bcw_rx_data {
	bus_dmamap_t		map;
	struct mbuf		*m;
};

struct bcw_tx_data {
	bus_dmamap_t		map;
	struct mbuf		*m;
	uint32_t		softstat;
	struct ieee80211_node	*ni;
};

struct bcw_rx_ring {
	bus_dmamap_t		map;
	bus_dma_segment_t	seg;
	bus_addr_t		physaddr;
	struct bcw_desc		*desc;
	struct bcw_rx_data	*data;
	int			count;
	int			cur;
	int			next;
};

struct bcw_tx_ring {
	bus_dmamap_t		map;
	bus_dma_segment_t	seg;
	bus_addr_t		physaddr;
	struct bcw_desc		*desc;
	struct bcw_tx_data	*data;
	int			count;
	int			queued;
	int			cur;
	int			next;
	int			stat;
};

struct bcw_desc {
	uint32_t	ctrl;
	uint32_t	addr;
};

/* ring descriptor */
struct bcw_dma_slot {
	uint32_t	ctrl;
	uint32_t	addr;
};

struct bcw_lopair {
	int8_t low;
	int8_t high;
	uint8_t used:1;
};

#define CTRL_BC_MASK	0x1fff		/* buffer byte count */
#define CTRL_EOT	0x10000000	/* end of descriptor table */
#define CTRL_IOC	0x20000000	/* interrupt on completion */
#define CTRL_EOF	0x40000000	/* end of frame */
#define CTRL_SOF	0x80000000	/* start of frame */
                
/* ilt */
#define BCW_ILT_FINEFREQA_SIZE		256
#define BCW_ILT_FINEFREQG_SIZE		256
#define BCW_ILT_NOISEA2_SIZE		8
#define BCW_ILT_NOISEA3_SIZE		8 
#define BCW_ILT_NOISEG1_SIZE		8
#define BCW_ILT_NOISEG2_SIZE		8
#define BCW_ILT_ROTOR_SIZE		53
#define BCW_ILT_RETARD_SIZE		53
#define BCW_ILT_SIGMASQR_SIZE		53
#define BCW_ILT_NOISESCALEG_SIZE	27

#if 0
/*
 * Mbuf pointers. We need these to keep track of the virtual addresses   
 * of our mbuf chains since we can only convert from physical to virtual,
 * not the other way around.
 *
 * The chip has 6 DMA engines, looks like we only need to use one each
 * for TX and RX, the others stay disabled.
 */
struct bcw_chain_data {
	struct mbuf    *bcw_tx_chain[BCW_NTXDESC];
	struct mbuf    *bcw_rx_chain[BCW_NRXDESC];
	bus_dmamap_t    bcw_tx_map[BCW_NTXDESC];  
	bus_dmamap_t    bcw_rx_map[BCW_NRXDESC];
};
#endif

struct bcw_rx_ring;
struct bcw_tx_ring;

/* Needs to have garbage removed */
struct bcw_softc {
	struct device		sc_dev;
	struct ieee80211com	sc_ic;
	struct bcw_rx_ring	sc_rxring;
	struct bcw_tx_ring	sc_txring;

	int			(*sc_newstate)(struct ieee80211com *,
				    enum ieee80211_state, int);
	int			(*sc_enable)(struct bcw_softc *);
	void			(*sc_disable)(struct bcw_softc *);
	void			(*sc_power)(struct bcw_softc *, int);
	void			(*sc_conf_write)(struct bcw_softc *,
				    uint32_t, uint32_t);
	uint32_t		(*sc_conf_read)(struct bcw_softc *, uint32_t);

	struct timeout		sc_scan_to;

	bus_dma_tag_t		sc_dmat;
	bus_space_tag_t		sc_iot;
	bus_space_handle_t	sc_ioh;

	void			*bcw_intrhand;
	const char		*bcw_intrstr;	/* interrupt description */
	struct pci_attach_args	sc_pa;
	struct cardbus_attach_args	sc_ca;
	uint32_t		sc_phy;	/* eeprom indicated phy */
	struct bcw_dma_slot	*bcw_rx_ring;	/* receive ring */
	struct bcw_dma_slot	*bcw_tx_ring;	/* transmit ring */
//	struct bcw_chain_data	sc_cdata;	/* mbufs */
	bus_dmamap_t		sc_ring_map;
	uint32_t		sc_intmask;	/* current intr mask */
	uint32_t		sc_rxin;	/* last rx descriptor seen */
	uint32_t		sc_txin;	/* last tx descriptor seen */
	int			sc_txsfree;	/* no. tx slots available */
	int			sc_txsnext;	/* next available tx slot */
	struct timeout		sc_timeout;
	/* Break these out into seperate structs */
	uint16_t		sc_chipid;	/* Chip ID */
	uint16_t		sc_chiprev;	/* Chip Revision */
	uint16_t		sc_prodid;	/* Product ID */
	struct bcw_core		sc_core[BCW_MAX_CORES];
//	struct bcw_radio	radio[BCW_RADIO_MAX];
	uint16_t		sc_phy_version;
	uint16_t		sc_phy_type;
	uint16_t		sc_phy_rev;
	uint8_t			sc_phy_connected:1, /* XXX */
				    calibrated:1,
				    is_locked:1,
				    dyn_tssi_tbl:1;
	uint16_t		sc_phy_loopback_gain[2];
	struct bcw_lopair	*sc_phy_lopairs;
	uint16_t		sc_phy_savedpctlreg;
	uint16_t		sc_phy_minlowsig[2];
	uint16_t		sc_phy_minlowsigpos[2];
	int8_t			sc_phy_idle_tssi;
	const int8_t		sc_phy_tssi2dbm;
//	uint16_t		sc_corerev;
	uint32_t		sc_radio_mnf;
	uint16_t		sc_radio_rev;
	uint16_t		sc_radio_ver;
	uint16_t		sc_radio_initval;
	int16_t			sc_radio_nrssi[2];
	int			sc_radio_interfmode;
	uint8_t			sc_radio_aci_enable:1,
				    sc_radio_aci_wlan_automatic:1,
				    sc_radio_aci_hw_rssi;
	int32_t			sc_radio_nrssislope;
	uint16_t		sc_radio_txpwr_offset;
	uint16_t		sc_radio_lofcal;
	uint16_t		sc_radio_txpower_desired;
	uint32_t		sc_phyinfo;
	uint16_t		sc_numcores;
	uint16_t		sc_havecommon;
	int			sc_currentcore;
	int			sc_lastcore;
	uint8_t			sc_radio_gain;
	uint16_t		sc_radio_pa0b0;
	uint16_t		sc_radio_pa0b1;
	uint16_t		sc_radio_pa0b2;
	uint16_t		sc_radio_pa1b0;
	uint16_t		sc_radio_pa1b1;
	uint16_t		sc_radio_pa1b2;
	uint16_t		sc_radio_baseband_atten;
	uint16_t		sc_radio_radio_atten;
	uint16_t		sc_radio_txctl1;
	uint16_t		sc_radio_txctl2;
	uint8_t			sc_radio_channel;
	uint8_t			sc_idletssi;
	uint8_t			sc_spromrev;
	uint16_t		sc_boardflags;
	uint8_t			sc_sbrev; /* Sonics Backplane Revision */
	/* Core locations */
	struct bcw_core		*sc_core_common;
	struct bcw_core		*sc_core_80211;
	struct bcw_core		*sc_core_bus;	/* PCI or cardbus */
	struct bcw_led		leds[BCW_NR_LEDS];
};

void	bcw_attach(struct bcw_softc *);
int	bcw_detach(void *);
int	bcw_intr(void *);
void	bcw_powercontrol_crystal_on(struct bcw_softc *);

#define BCW_DEBUG
#ifdef BCW_DEBUG
//#define DPRINTF(x)	do { if (bcw_debug) printf x; } while (0)
//#define DPRINTFN(n,x)	do { if (bcwdebug >= (n)) printf x; } while (0)
#define DPRINTF(x)	do { if (1) printf x; } while (0)
#define DPRINTFN(n,x)	do { if (1 >= (n)) printf x; } while (0)
//int bcw_debug = 99;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif

/*
 * Some legacy stuff from bce and iwi to make this compile
 */
/* transmit buffer max frags allowed */
#define BCW_NTXFRAGS	16

/* Packet status is returned in a pre-packet header */
struct rx_pph {
	uint16_t	len;
	uint16_t	flags;
	uint16_t	pad[12];
};

#define BCW_PREPKT_HEADER_SIZE		30

/* packet status flags bits */
#define RXF_NO				0x8	/* odd number of nibbles */
#define RXF_RXER			0x4	/* receive symbol error */
#define RXF_CRC				0x2	/* crc error */
#define RXF_OV				0x1	/* fifo overflow */

#define BCW_TIMEOUT			100	/* # 10us for mii read/write */

/* for ring descriptors */
#define BCW_RXBUF_LEN			(MCLBYTES - 4)
#define BCW_INIT_RXDESC(sc, x)						\
do {									\
	struct bcw_dma_slot *__bcwd = &sc->bcw_rx_ring[x];		\
									\
	*mtod(sc->bcw_cdata.bcw_rx_chain[x], uint32_t *) = 0;		\
	__bcwd->addr =							\
	    htole32(sc->bcw_cdata.bcw_rx_map[x]->dm_segs[0].ds_addr	\
	    + 0x40000000);						\
	if (x != (BCW_NRXDESC - 1))					\
		__bcwd->ctrl = htole32(BCW_RXBUF_LEN);			\
	else								\
		__bcwd->ctrl = htole32(BCW_RXBUF_LEN | CTRL_EOT);	\
	bus_dmamap_sync(sc->bcw_dmatag, sc->bcw_ring_map,		\
	    sizeof(struct bcw_dma_slot) * x,				\
	    sizeof(struct bcw_dma_slot),				\
	    BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);			\
} while (/* CONSTCOND */ 0)

#define BCW_NTXFRAGS   16