1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
|
/* $OpenBSD: ispvar.h,v 1.11 2000/07/06 05:31:49 mjacob Exp $ */
/*
* Soft Definitions for for Qlogic ISP SCSI adapters.
*
*---------------------------------------
* Copyright (c) 1997, 1998, 1999 by Matthew Jacob
* NASA/Ames Research Center
* All rights reserved.
*---------------------------------------
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#ifndef _ISPVAR_H
#define _ISPVAR_H
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <dev/ic/ispmbox.h>
#ifdef ISP_TARGET_MODE
#include <dev/ic/isp_target.h>
#include <dev/ic/isp_tpublic.h>
#endif
#endif
#ifdef __FreeBSD__
#include <dev/isp/ispmbox.h>
#ifdef ISP_TARGET_MODE
#include <dev/isp/isp_target.h>
#include <dev/isp/isp_tpublic.h>
#endif
#endif
#ifdef __linux__
#include "ispmbox.h"
#ifdef ISP_TARGET_MODE
#include "isp_target.h"
#include "isp_tpublic.h"
#endif
#endif
#define ISP_CORE_VERSION_MAJOR 1
#define ISP_CORE_VERSION_MINOR 16
/*
* Vector for bus specific code to provide specific services.
*/
struct ispsoftc;
struct ispmdvec {
u_int16_t (*dv_rd_reg) __P((struct ispsoftc *, int));
void (*dv_wr_reg) __P((struct ispsoftc *, int, u_int16_t));
int (*dv_mbxdma) __P((struct ispsoftc *));
int (*dv_dmaset) __P((struct ispsoftc *,
ISP_SCSI_XFER_T *, ispreq_t *, u_int16_t *, u_int16_t));
void (*dv_dmaclr)
__P((struct ispsoftc *, ISP_SCSI_XFER_T *, u_int32_t));
void (*dv_reset0) __P((struct ispsoftc *));
void (*dv_reset1) __P((struct ispsoftc *));
void (*dv_dregs) __P((struct ispsoftc *));
const u_int16_t *dv_ispfw; /* ptr to f/w */
u_int16_t dv_fwlen; /* length of f/w */
u_int16_t dv_codeorg; /* code ORG for f/w */
u_int32_t dv_fwrev; /* f/w revision */
/*
* Initial values for conf1 register
*/
u_int16_t dv_conf1;
u_int16_t dv_clock; /* clock frequency */
};
#define MAX_TARGETS 16
#ifdef ISP2100_FABRIC
#define MAX_FC_TARG 256
#else
#define MAX_FC_TARG 126
#endif
#define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS)
#define ISP_MAX_LUNS(isp) (isp)->isp_maxluns
/*
* Macros to read, write ISP registers through bus specific code.
*/
#define ISP_READ(isp, reg) \
(*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg))
#define ISP_WRITE(isp, reg, val) \
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val))
#define ISP_MBOXDMASETUP(isp) \
(*(isp)->isp_mdvec->dv_mbxdma)((isp))
#define ISP_DMASETUP(isp, xs, req, iptrp, optr) \
(*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req), (iptrp), (optr))
#define ISP_DMAFREE(isp, xs, hndl) \
if ((isp)->isp_mdvec->dv_dmaclr) \
(*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl))
#define ISP_RESET0(isp) \
if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp))
#define ISP_RESET1(isp) \
if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp))
#define ISP_DUMPREGS(isp) \
if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp))
#define ISP_SETBITS(isp, reg, val) \
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val))
#define ISP_CLRBITS(isp, reg, val) \
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val))
/* this is the size of a queue entry (request and response) */
#define QENTRY_LEN 64
/* both request and result queue length must be a power of two */
#define RQUEST_QUEUE_LEN MAXISPREQUEST
/* I've seen wierdnesses with the result queue < 64 */
#if MAXISPREQUEST > 64
#define RESULT_QUEUE_LEN (MAXISPREQUEST/2)
#else
#define RESULT_QUEUE_LEN MAXISPREQUEST
#endif
#define ISP_QUEUE_ENTRY(q, idx) ((q) + ((idx) * QENTRY_LEN))
#define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN)
#define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1))
#define ISP_QAVAIL(in, out, qlen) \
((in == out)? (qlen - 1) : ((in > out)? \
((qlen - 1) - (in - out)) : (out - in - 1)))
#define ISP_ADD_REQUEST(isp, iptr) \
ISP_WRITE(isp, INMAILBOX4, iptr), isp->isp_reqidx = iptr
/*
* SCSI Specific Host Adapter Parameters- per bus, per target
*/
typedef struct {
u_int isp_gotdparms : 1,
isp_req_ack_active_neg : 1,
isp_data_line_active_neg: 1,
isp_cmd_dma_burst_enable: 1,
isp_data_dma_burst_enabl: 1,
isp_fifo_threshold : 3,
isp_ultramode : 1,
isp_diffmode : 1,
isp_lvdmode : 1,
: 1,
isp_initiator_id : 4,
isp_async_data_setup : 4;
u_int16_t isp_selection_timeout;
u_int16_t isp_max_queue_depth;
u_int8_t isp_tag_aging;
u_int8_t isp_bus_reset_delay;
u_int8_t isp_retry_count;
u_int8_t isp_retry_delay;
struct {
u_int dev_enable : 1, /* ignored */
: 1,
dev_update : 1,
dev_refresh : 1,
exc_throttle : 8,
cur_offset : 4,
sync_offset : 4;
u_int8_t cur_period; /* current sync period */
u_int8_t sync_period; /* goal sync period */
u_int16_t dev_flags; /* goal device flags */
u_int16_t cur_dflags; /* current device flags */
} isp_devparam[MAX_TARGETS];
} sdparam;
/*
* Device Flags
*/
#define DPARM_DISC 0x8000
#define DPARM_PARITY 0x4000
#define DPARM_WIDE 0x2000
#define DPARM_SYNC 0x1000
#define DPARM_TQING 0x0800
#define DPARM_ARQ 0x0400
#define DPARM_QFRZ 0x0200
#define DPARM_RENEG 0x0100
#define DPARM_NARROW 0x0080 /* Possibly only available with >= 7.55 fw */
#define DPARM_ASYNC 0x0040 /* Possibly only available with >= 7.55 fw */
#define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ)
#define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING))
/* technically, not really correct, as they need to be rated based upon clock */
#define ISP_40M_SYNCPARMS 0x080a
#define ISP_20M_SYNCPARMS 0x080c
#define ISP_10M_SYNCPARMS 0x0c19
#define ISP_08M_SYNCPARMS 0x0c25
#define ISP_05M_SYNCPARMS 0x0c32
#define ISP_04M_SYNCPARMS 0x0c41
/*
* Fibre Channel Specifics
*/
#define FL_PORT_ID 0x7e /* FL_Port Special ID */
#define FC_PORT_ID 0x7f /* Fabric Controller Special ID */
#define FC_SNS_ID 0x80 /* SNS Server Special ID */
typedef struct {
u_int32_t isp_fwoptions : 16,
: 4,
loop_seen_once : 1,
isp_loopstate : 3, /* Current Loop State */
isp_fwstate : 3, /* ISP F/W state */
isp_gotdparms : 1,
isp_topo : 3,
isp_onfabric : 1;
u_int8_t isp_loopid; /* hard loop id */
u_int8_t isp_alpa; /* ALPA */
volatile u_int16_t isp_lipseq; /* LIP sequence # */
u_int32_t isp_portid;
u_int8_t isp_execthrottle;
u_int8_t isp_retry_delay;
u_int8_t isp_retry_count;
u_int8_t isp_reserved;
u_int16_t isp_maxalloc;
u_int16_t isp_maxfrmlen;
u_int64_t isp_nodewwn;
u_int64_t isp_portwwn;
/*
* Port Data Base. This is indexed by 'target', which is invariate.
* However, elements within can move around due to loop changes,
* so the actual loop ID passed to the F/W is in this structure.
* The first time the loop is seen up, loopid will match the index
* (except for fabric nodes which are above mapped above FC_SNS_ID
* and are completely virtual), but subsequent LIPs can cause things
* to move around.
*/
struct lportdb {
u_int
loopid : 8,
: 4,
loggedin : 1,
roles : 2,
valid : 1;
u_int32_t portid;
u_int64_t node_wwn;
u_int64_t port_wwn;
} portdb[MAX_FC_TARG], tport[FL_PORT_ID];
/*
* Scratch DMA mapped in area to fetch Port Database stuff, etc.
*/
caddr_t isp_scratch;
u_int32_t isp_scdma;
} fcparam;
#define FW_CONFIG_WAIT 0
#define FW_WAIT_AL_PA 1
#define FW_WAIT_LOGIN 2
#define FW_READY 3
#define FW_LOSS_OF_SYNC 4
#define FW_ERROR 5
#define FW_REINIT 6
#define FW_NON_PART 7
#define LOOP_NIL 0
#define LOOP_LIP_RCVD 1
#define LOOP_PDB_RCVD 2
#define LOOP_READY 7
#define TOPO_NL_PORT 0
#define TOPO_FL_PORT 1
#define TOPO_N_PORT 2
#define TOPO_F_PORT 3
#define TOPO_PTP_STUB 4
/*
* Soft Structure per host adapter
*/
struct ispsoftc {
/*
* Platform (OS) specific data
*/
struct isposinfo isp_osinfo;
/*
* Pointer to bus specific functions and data
*/
struct ispmdvec * isp_mdvec;
/*
* (Mostly) nonvolatile state. Board specific parameters
* may contain some volatile state (e.g., current loop state).
*/
void * isp_param; /* type specific */
u_int16_t isp_fwrev[3]; /* Loaded F/W revision */
u_int16_t isp_romfw_rev[3]; /* PROM F/W revision */
u_int16_t isp_maxcmds; /* max possible I/O cmds */
u_int8_t isp_type; /* HBA Chip Type */
u_int8_t isp_revision; /* HBA Chip H/W Revision */
u_int32_t isp_maxluns; /* maximum luns supported */
u_int32_t : 4,
isp_touched : 1, /* board ever seen? */
isp_fast_mttr : 1, /* fast sram */
isp_bustype : 1, /* SBus or PCI */
: 1,
isp_dblev : 8, /* debug level */
isp_clock : 8, /* input clock */
isp_confopts : 8; /* config options */
/*
* Volatile state
*/
volatile u_int32_t
isp_mboxbsy : 8, /* mailbox command active */
: 1,
isp_state : 3,
isp_sendmarker : 2, /* send a marker entry */
isp_update : 2, /* update parameters */
isp_nactive : 16; /* how many commands active */
volatile u_int16_t isp_reqodx; /* index of last ISP pickup */
volatile u_int16_t isp_reqidx; /* index of next request */
volatile u_int16_t isp_residx; /* index of next result */
volatile u_int16_t isp_lasthdls; /* last handle seed */
volatile u_int16_t isp_mboxtmp[MAX_MAILBOX];
/*
* Active commands are stored here, indexed by handle functions.
*/
ISP_SCSI_XFER_T **isp_xflist;
/*
* request/result queue pointers and dma handles for them.
*/
caddr_t isp_rquest;
caddr_t isp_result;
u_int32_t isp_rquest_dma;
u_int32_t isp_result_dma;
};
#define SDPARAM(isp) ((sdparam *) (isp)->isp_param)
#define FCPARAM(isp) ((fcparam *) (isp)->isp_param)
/*
* ISP States
*/
#define ISP_NILSTATE 0
#define ISP_RESETSTATE 1
#define ISP_INITSTATE 2
#define ISP_RUNSTATE 3
/*
* ISP Configuration Options
*/
#define ISP_CFG_NORELOAD 0x80 /* don't download f/w */
#define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */
#define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */
#define ISP_CFG_OWNWWN 0x02 /* override NVRAM wwn */
#define ISP_CFG_NPORT 0x04 /* try to force N- instead of L-Port */
#define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic)
#define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2])
/*
* Bus (implementation) types
*/
#define ISP_BT_PCI 0 /* PCI Implementations */
#define ISP_BT_SBUS 1 /* SBus Implementations */
/*
* Chip Types
*/
#define ISP_HA_SCSI 0xf
#define ISP_HA_SCSI_UNKNOWN 0x1
#define ISP_HA_SCSI_1020 0x2
#define ISP_HA_SCSI_1020A 0x3
#define ISP_HA_SCSI_1040 0x4
#define ISP_HA_SCSI_1040A 0x5
#define ISP_HA_SCSI_1040B 0x6
#define ISP_HA_SCSI_1040C 0x7
#define ISP_HA_SCSI_1240 0x8
#define ISP_HA_SCSI_1080 0x9
#define ISP_HA_SCSI_1280 0xa
#define ISP_HA_SCSI_12160 0xb
#define ISP_HA_FC 0xf0
#define ISP_HA_FC_2100 0x10
#define ISP_HA_FC_2200 0x20
#define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI)
#define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240)
#define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080)
#define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280)
#define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160)
#define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp))
#define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp))
#define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_12160(isp))
#define IS_ULTRA3(isp) (IS_12160(isp))
#define IS_FC(isp) (isp->isp_type & ISP_HA_FC)
#define IS_2100(isp) (isp->isp_type == ISP_HA_FC_2100)
#define IS_2200(isp) (isp->isp_type == ISP_HA_FC_2200)
/*
* Function Prototypes
*/
/*
* Reset Hardware. Totally. Assumes that you'll follow this with
* a call to isp_init.
*/
void isp_reset __P((struct ispsoftc *));
/*
* Initialize Hardware to known state
*/
void isp_init __P((struct ispsoftc *));
/*
* Reset the ISP and call completion for any orphaned commands.
*/
void isp_restart __P((struct ispsoftc *));
/*
* Interrupt Service Routine
*/
int isp_intr __P((void *));
/*
* Command Entry Point
*/
int32_t ispscsicmd __P((ISP_SCSI_XFER_T *));
/*
* Platform Dependent to External to Internal Control Function
*
* Assumes all locks are held and that no reentrancy issues need be dealt with.
*
*/
typedef enum {
ISPCTL_RESET_BUS, /* Reset Bus */
ISPCTL_RESET_DEV, /* Reset Device */
ISPCTL_ABORT_CMD, /* Abort Command */
ISPCTL_UPDATE_PARAMS, /* Update Operating Parameters */
ISPCTL_FCLINK_TEST, /* Test FC Link Status */
ISPCTL_PDB_SYNC, /* Synchronize Port Database */
ISPCTL_TOGGLE_TMODE /* toggle target mode */
} ispctl_t;
int isp_control __P((struct ispsoftc *, ispctl_t, void *));
/*
* Platform Dependent to Internal to External Control Function
* (each platform must provide such a function)
*
* Assumes all locks are held and that no reentrancy issues need be dealt with.
*
*/
typedef enum {
ISPASYNC_NEW_TGT_PARAMS,
ISPASYNC_BUS_RESET, /* Bus Was Reset */
ISPASYNC_LOOP_DOWN, /* FC Loop Down */
ISPASYNC_LOOP_UP, /* FC Loop Up */
ISPASYNC_PDB_CHANGED, /* FC Port Data Base Changed */
ISPASYNC_CHANGE_NOTIFY, /* FC SNS Change Notification */
ISPASYNC_FABRIC_DEV, /* FC New Fabric Device */
ISPASYNC_TARGET_MESSAGE, /* target message */
ISPASYNC_TARGET_EVENT, /* target asynchronous event */
ISPASYNC_TARGET_ACTION /* other target command action */
} ispasync_t;
int isp_async __P((struct ispsoftc *, ispasync_t, void *));
/*
* lost command routine (XXXX IN TRANSITION XXXX)
*/
void isp_lostcmd __P((struct ispsoftc *, ISP_SCSI_XFER_T *));
#endif /* _ISPVAR_H */
|