1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
|
/* $OpenBSD: lm78var.h,v 1.9 2007/01/08 22:18:50 kettenis Exp $ */
/*
* Copyright (c) 2005, 2006 Mark Kettenis
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*
* National Semiconductor LM78/79/81 registers
*/
#define LM_POST_RAM 0x00 /* POST RAM occupies 0x00 -- 0x1f */
#define LM_VALUE_RAM 0x20 /* Value RAM occupies 0x20 -- 0x3f */
#define LM_FAN1 0x28 /* FAN1 reading */
#define LM_FAN2 0x29 /* FAN2 reading */
#define LM_FAN3 0x2a /* FAN3 reading */
#define LM_CONFIG 0x40 /* Configuration */
#define LM_ISR1 0x41 /* Interrupt Status 1 */
#define LM_ISR2 0x42 /* Interrupt Status 2 */
#define LM_SMI1 0x43 /* SMI# Mask 1 */
#define LM_SMI2 0x44 /* SMI# Mask 2 */
#define LM_NMI1 0x45 /* NMI Mask 1 */
#define LM_NMI2 0x46 /* NMI Mask 2 */
#define LM_VIDFAN 0x47 /* VID/Fan Divisor */
#define LM_SBUSADDR 0x48 /* Serial Bus Address */
#define LM_CHIPID 0x49 /* Chip Reset/ID */
/* Chip IDs */
#define LM_CHIPID_LM78 0x00
#define LM_CHIPID_LM78J 0x40
#define LM_CHIPID_LM79 0xC0
#define LM_CHIPID_LM81 0x80
#define LM_CHIPID_MASK 0xfe
/*
* Winbond registers
*
* Several models exists. The W83781D is mostly compatible with the
* LM78, but has two extra temperatures. Later models add extra
* voltage sensors, fans and bigger fan divisors to accomodate slow
* running fans. To accomodate the extra sensors some models have
* different memory banks.
*/
#define WB_T23ADDR 0x4a /* Temperature 2 and 3 Serial Bus Address */
#define WB_PIN 0x4b /* Pin Control */
#define WB_BANKSEL 0x4e /* Bank Select */
#define WB_VENDID 0x4f /* Vendor ID */
/* Bank 0 regs */
#define WB_BANK0_CHIPID 0x58 /* Chip ID */
#define WB_BANK0_FAN45 0x5c /* Fan 4/5 Divisor Control (W83791D only) */
#define WB_BANK0_VBAT 0x5d /* VBAT Monitor Control */
#define WB_BANK0_FAN4 0xba /* Fan 4 reading (W83791D only) */
#define WB_BANK0_FAN5 0xbb /* Fan 5 reading (W83791D only) */
#define WB_BANK0_CONFIG 0x18 /* VRM & OVT Config (W83627THF/W83637HF) */
/* Bank 1 registers */
#define WB_BANK1_T2H 0x50 /* Temperature 2 High Byte */
#define WB_BANK1_T2L 0x51 /* Temperature 2 Low Byte */
/* Bank 2 registers */
#define WB_BANK2_T3H 0x50 /* Temperature 3 High Byte */
#define WB_BANK2_T3L 0x51 /* Temperature 3 Low Byte */
/* Bank 4 registers (W83782D/W83627HF and later models only) */
#define WB_BANK4_T1OFF 0x54 /* Temperature 1 Offset */
#define WB_BANK4_T2OFF 0x55 /* Temperature 2 Offset */
#define WB_BANK4_T3OFF 0x56 /* Temperature 3 Offset */
/* Bank 5 registers (W83782D/W83627HF and later models only) */
#define WB_BANK5_5VSB 0x50 /* 5VSB reading */
#define WB_BANK5_VBAT 0x51 /* VBAT reading */
/* Bank selection */
#define WB_BANKSEL_B0 0x00 /* Bank 0 */
#define WB_BANKSEL_B1 0x01 /* Bank 1 */
#define WB_BANKSEL_B2 0x02 /* Bank 2 */
#define WB_BANKSEL_B3 0x03 /* Bank 3 */
#define WB_BANKSEL_B4 0x04 /* Bank 4 */
#define WB_BANKSEL_B5 0x05 /* Bank 5 */
#define WB_BANKSEL_HBAC 0x80 /* Register 0x4f High Byte Access */
/* Vendor IDs */
#define WB_VENDID_WINBOND 0x5ca3 /* Winbond */
#define WB_VENDID_ASUS 0x12c3 /* ASUS */
/* Chip IDs */
#define WB_CHIPID_W83781D 0x10
#define WB_CHIPID_W83781D_2 0x11
#define WB_CHIPID_W83627HF 0x21
#define WB_CHIPID_AS99127F 0x31 /* Asus W83781D clone */
#define WB_CHIPID_W83782D 0x30
#define WB_CHIPID_W83783S 0x40
#define WB_CHIPID_W83697HF 0x60
#define WB_CHIPID_W83791D 0x71
#define WB_CHIPID_W83791SD 0x72
#define WB_CHIPID_W83792D 0x7a
#define WB_CHIPID_W83637HF 0x80
#define WB_CHIPID_W83627THF 0x90
/* Config bits */
#define WB_CONFIG_VMR9 0x01
/* Reference voltage (mV) */
#define WB_VREF 3600
#define WB_MAX_SENSORS 19
struct lm_softc;
struct lm_sensor {
char *desc;
enum sensor_type type;
u_int8_t bank;
u_int8_t reg;
void (*refresh)(struct lm_softc *, int);
int rfact;
};
struct lm_softc {
struct device sc_dev;
struct sensor sensors[WB_MAX_SENSORS];
struct sensordev sensordev;
struct lm_sensor *lm_sensors;
u_int numsensors;
void (*refresh_sensor_data) (struct lm_softc *);
u_int8_t (*lm_readreg)(struct lm_softc *, int);
void (*lm_writereg)(struct lm_softc *, int, int);
u_int8_t sbusaddr;
u_int8_t chipid;
u_int8_t vrm9;
};
void lm_attach(struct lm_softc *);
int lm_detach(struct lm_softc *);
|
