1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
|
/* $OpenBSD: rtl80x9.c,v 1.12 2021/03/07 06:21:38 jsg Exp $ */
/* $NetBSD: rtl80x9.c,v 1.1 1998/10/31 00:44:33 thorpej Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/syslog.h>
#include <sys/socket.h>
#include <sys/device.h>
#include <net/if.h>
#include <net/if_media.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <machine/bus.h>
#include <dev/ic/dp8390reg.h>
#include <dev/ic/dp8390var.h>
#include <dev/ic/ne2000var.h>
#include <dev/ic/rtl80x9reg.h>
#include <dev/ic/rtl80x9var.h>
int
rtl80x9_mediachange(struct dp8390_softc *dsc)
{
/*
* Current media is already set up. Just reset the interface
* to let the new value take hold. The new media will be
* set up in ne_pci_rtl8029_init_card() called via dp8390_init().
*/
dp8390_reset(dsc);
return (0);
}
void
rtl80x9_mediastatus(struct dp8390_softc *sc, struct ifmediareq *ifmr)
{
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
u_int8_t cr_proto = sc->cr_proto |
((ifp->if_flags & IFF_RUNNING) ? ED_CR_STA : ED_CR_STP);
/*
* Sigh, can detect which media is being used, but can't
* detect if we have link or not.
*/
/* Set NIC to page 3 registers. */
NIC_PUT(sc->sc_regt, sc->sc_regh, ED_P0_CR, cr_proto | ED_CR_PAGE_3);
if (NIC_GET(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG0) &
RTL3_CONFIG0_BNC)
ifmr->ifm_active = IFM_ETHER|IFM_10_2;
else {
ifmr->ifm_active = IFM_ETHER|IFM_10_T;
if (NIC_GET(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG3) &
RTL3_CONFIG3_FUDUP)
ifmr->ifm_active |= IFM_FDX;
}
/* Set NIC to page 0 registers. */
NIC_PUT(sc->sc_regt, sc->sc_regh, ED_P0_CR, cr_proto | ED_CR_PAGE_0);
}
void
rtl80x9_init_card(struct dp8390_softc *sc)
{
struct ifmedia *ifm = &sc->sc_media;
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
u_int8_t cr_proto = sc->cr_proto |
((ifp->if_flags & IFF_RUNNING) ? ED_CR_STA : ED_CR_STP);
u_int8_t reg;
/* Set NIC to page 3 registers. */
NIC_PUT(sc->sc_regt, sc->sc_regh, ED_P0_CR, cr_proto | ED_CR_PAGE_3);
/* write enable config1-3. */
NIC_PUT(sc->sc_regt, sc->sc_regh, NERTL_RTL3_EECR,
RTL3_EECR_EEM1|RTL3_EECR_EEM0);
/* First, set basic media type. */
reg = NIC_GET(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG2);
reg &= ~(RTL3_CONFIG2_PL1|RTL3_CONFIG2_PL0);
switch (IFM_SUBTYPE(ifm->ifm_cur->ifm_media)) {
case IFM_AUTO:
/* Nothing to do; both bits clear == auto-detect. */
break;
case IFM_10_T:
/*
* According to docs, this should be:
* reg |= RTL3_CONFIG2_PL0;
* but this doesn't work, so make it the same as AUTO.
*/
break;
case IFM_10_2:
reg |= RTL3_CONFIG2_PL1|RTL3_CONFIG2_PL0;
break;
}
NIC_PUT(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG2, reg);
/* Now, set duplex mode. */
reg = NIC_GET(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG3);
if (ifm->ifm_cur->ifm_media & IFM_FDX)
reg |= RTL3_CONFIG3_FUDUP;
else
reg &= ~RTL3_CONFIG3_FUDUP;
NIC_PUT(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG3, reg);
/* write disable config1-3 */
NIC_PUT(sc->sc_regt, sc->sc_regh, NERTL_RTL3_EECR, 0);
/* Set NIC to page 0 registers. */
NIC_PUT(sc->sc_regt, sc->sc_regh, ED_P0_CR, cr_proto | ED_CR_PAGE_0);
}
void
rtl80x9_media_init(struct dp8390_softc *sc)
{
static uint64_t rtl80x9_media[] = {
IFM_ETHER|IFM_AUTO,
IFM_ETHER|IFM_10_T,
IFM_ETHER|IFM_10_T|IFM_FDX,
IFM_ETHER|IFM_10_2,
};
static const int rtl80x9_nmedia =
sizeof(rtl80x9_media) / sizeof(rtl80x9_media[0]);
int i;
uint64_t defmedia;
u_int8_t conf2, conf3;
/* Set NIC to page 3 registers. */
bus_space_write_1(sc->sc_regt, sc->sc_regh, ED_P0_CR, ED_CR_PAGE_3);
conf2 = bus_space_read_1(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG2);
conf3 = bus_space_read_1(sc->sc_regt, sc->sc_regh, NERTL_RTL3_CONFIG3);
conf2 &= RTL3_CONFIG2_PL1|RTL3_CONFIG2_PL0;
switch (conf2) {
case 0:
defmedia = IFM_ETHER|IFM_AUTO;
break;
case RTL3_CONFIG2_PL1|RTL3_CONFIG2_PL0:
case RTL3_CONFIG2_PL1: /* XXX rtl docs sys 10base5, but chip cant do */
defmedia = IFM_ETHER|IFM_10_2;
break;
case RTL3_CONFIG2_PL0:
if (conf3 & RTL3_CONFIG3_FUDUP)
defmedia = IFM_ETHER|IFM_10_T|IFM_FDX;
else
defmedia = IFM_ETHER|IFM_10_T;
break;
}
/* Set NIC to page 0 registers. */
bus_space_write_1(sc->sc_regt, sc->sc_regh, ED_P0_CR, ED_CR_PAGE_0);
ifmedia_init(&sc->sc_media, 0, dp8390_mediachange, dp8390_mediastatus);
for (i = 0; i < rtl80x9_nmedia; i++)
ifmedia_add(&sc->sc_media, rtl80x9_media[i], 0, NULL);
ifmedia_set(&sc->sc_media, defmedia);
}
|
