blob: d0c8e8902e8716308cc61463fc5bf8b62025703e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
|
/* $OpenBSD: if_ecreg.h,v 1.2 2001/01/25 03:50:50 todd Exp $ */
/* $NetBSD: if_ecreg.h,v 1.1 1997/11/02 00:44:26 thorpej Exp $ */
/*
* 3Com Etherlink II (3c503) register definitions.
*
* Copyright (C) 1993, David Greenman. This software may be used, modified,
* copied, distributed, and sold, in both source and binary form provided that
* the above copyright and these terms are retained. Under no circumstances is
* the author responsible for the proper functioning of this software, nor does
* the author assume any responsibility for damages incurred with its use.
*/
#ifndef _DEV_ISA_IF_ECREG_H_
#define _DEV_ISA_IF_ECREG_H_
#define ELINK2_NIC_OFFSET 0
#define ELINK2_ASIC_OFFSET 0x400 /* offset to nic i/o regs */
/*
* XXX - The I/O address range is fragmented in the 3c503; this is the
* number of regs at iobase.
*/
#define ELINK2_NIC_PORTS 16
#define ELINK2_ASIC_PORTS 16
/* tx memory starts in second bank on 8bit cards */
#define ELINK2_TX_PAGE_OFFSET_8BIT 0x20
/* tx memory starts in first bank on 16bit cards */
#define ELINK2_TX_PAGE_OFFSET_16BIT 0x0
/* ...and rx memory starts in second bank */
#define ELINK2_RX_PAGE_OFFSET_16BIT 0x20
/*
* Page Start Register. Must match PSTART in NIC.
*/
#define ELINK2_PSTR 0
/*
* Page Stop Register. Must match PSTOP in NIC.
*/
#define ELINK2_PSPR 1
/*
* DrQ Timer Register. Determines number of bytes to be transferred during a
* DMA burst.
*/
#define ELINK2_DQTR 2
/*
* Base Configuration Register. Read-only register which contains the
* board-configured I/O base address of the adapter. Bit encoded.
*/
#define ELINK2_BCFR 3
/*
* EPROM Configuration Register. Read-only register which contains the
* board-configured memory base address. Bit encoded.
*/
#define ELINK2_PCFR 4
/*
* GA Configuration Register. Gate-Array Configuration Register.
*
* mbs2 mbs1 mbs0 start address
* 0 0 0 0x0000
* 0 0 1 0x2000
* 0 1 0 0x4000
* 0 1 1 0x6000
*
* Note that with adapters with only 8K, the setting for 0x2000 must always be
* used.
*/
#define ELINK2_GACFR 5
#define ELINK2_GACFR_MBS0 0x01
#define ELINK2_GACFR_MBS1 0x02
#define ELINK2_GACFR_MBS2 0x04
#define ELINK2_GACFR_RSEL 0x08 /* enable shared memory */
#define ELINK2_GACFR_TEST 0x10 /* for GA testing */
#define ELINK2_GACFR_OWS 0x20 /* select 0WS access to GA */
#define ELINK2_GACFR_TCM 0x40 /* Mask DMA interrupts */
#define ELINK2_GACFR_NIM 0x80 /* Mask NIC interrupts */
/*
* Control Register. Miscellaneous control functions.
*/
#define ELINK2_CR 6
#define ELINK2_CR_RST 0x01 /* Reset GA and NIC */
#define ELINK2_CR_XSEL 0x02 /* Transceiver select. BNC=1(def) AUI=0 */
#define ELINK2_CR_EALO 0x04 /* window EA PROM 0-15 to I/O base */
#define ELINK2_CR_EAHI 0x08 /* window EA PROM 16-31 to I/O base */
#define ELINK2_CR_SHARE 0x10 /* select interrupt sharing option */
#define ELINK2_CR_DBSEL 0x20 /* Double buffer select */
#define ELINK2_CR_DDIR 0x40 /* DMA direction select */
#define ELINK2_CR_START 0x80 /* Start DMA controller */
/*
* Status Register. Miscellaneous status information.
*/
#define ELINK2_STREG 7
#define ELINK2_STREG_REV 0x07 /* GA revision */
#define ELINK2_STREG_DIP 0x08 /* DMA in progress */
#define ELINK2_STREG_DTC 0x10 /* DMA terminal count */
#define ELINK2_STREG_OFLW 0x20 /* Overflow */
#define ELINK2_STREG_UFLW 0x40 /* Underflow */
#define ELINK2_STREG_DPRDY 0x80 /* Data port ready */
/*
* Interrupt/DMA Configuration Register
*/
#define ELINK2_IDCFR 8
#define ELINK2_IDCFR_DRQ 0x07 /* DMA request */
#define ELINK2_IDCFR_UNUSED 0x08 /* not used */
#if 0
#define ELINK2_IDCFR_IRQ 0xF0 /* Interrupt request */
#else
#define ELINK2_IDCFR_IRQ2 0x10 /* Interrupt request 2 select */
#define ELINK2_IDCFR_IRQ3 0x20 /* Interrupt request 3 select */
#define ELINK2_IDCFR_IRQ4 0x40 /* Interrupt request 4 select */
#define ELINK2_IDCFR_IRQ5 0x80 /* Interrupt request 5 select */
#endif
/*
* DMA Address Register MSB
*/
#define ELINK2_DAMSB 9
/*
* DMA Address Register LSB
*/
#define ELINK2_DALSB 0x0a
/*
* Vector Pointer Register 2
*/
#define ELINK2_VPTR2 0x0b
/*
* Vector Pointer Register 1
*/
#define ELINK2_VPTR1 0x0c
/*
* Vector Pointer Register 0
*/
#define ELINK2_VPTR0 0x0d
/*
* Register File Access MSB
*/
#define ELINK2_RFMSB 0x0e
/*
* Register File Access LSB
*/
#define ELINK2_RFLSB 0x0f
#endif /* _DEV_ISA_IF_ECREG_H_ */
|
